In situ infrared, Raman and X-ray spectroscopy for the mechanistic understanding of hydrogen evolution reaction

Hydrogen production by water reduction reactions has received considerable attention because hydrogen is considered a clean-energy carrier,key for a sustainable energy future.Computational methods have been widely used to study the reaction mechanism of the hydrogen evolution reaction(HER),but the calculation results need to be supported by experimental results and direct evidence to confirm the mechanistic insights.In this review,we discuss the fundamental principles of the in situ spectroscopic strategy and a theoretical model for a mechanistic understanding of the HER.In addition,we investigate recent studies by in situ Fourier transform infrared(FTIR),Raman spectroscopy,and X-ray absorption spectroscopy(XAS) and cover new findings that occur at the catalyst-electrolyte interface during HER.These spectroscopic strategies provide practical ways to elucidate catalyst phase,reaction intermediate,catalyst-electrolyte interface,intermediate binding energy,metal valency state,and coordination environment during HER.

On-Line Multichannel Raman Spectroscopic Detection System For Capillary Zone Electrophoresis

An on-line multichannel Raman spectroscopic detection system for capillary electrophoresis was established by using an Ar+ laser and a cryogenically cooled ICCD. Resonant excitation Raman spectra of methyl red and methyl orange were employed to test the system. The result shows that it could yield on-line electrophoretogram and time series of Raman spectra.

Quantification of radiation damage in natural and synthetic zircon by Raman spectroscopy:application to low-temperature thermochronology

Due to its ubiquitous occurrence in igneous,metamorphic,and sedimentary rocks and its wide application in geochronology and geochemistry,zircon has become the most widely used accessory mineral in the geological community.Nevertheless,the decay of U and Th causes radiation damage to the zircon structure,resulting in various degrees of metamictization,which can affect the accuracy of U–Pb dates and Hf and O isotope results.If the degree of zircon radiation damage can be quantified,the influence on geochemical analyses can be evaluated,and the results can be corrected more precisely.In this paper,synthetic and natural zircon crystals with different crystallization ages were selected for Raman spectroscopy analysis,cathodoluminescence imaging,and determination of the U and Th concentrations.The results show that Raman FWHM(full width at half bandmaximum)and Raman shift correlate with alpha dose(Da)ofzirconsfollowingtheseequations,FWHM=44.36(±2.32)×[1-exp(-2.74×Da)]-+1.7(±0.19),Raman Shift=-6.53×Da+1007.69.Analysis of synthetic zircon crystals shows that doped REEs(rare earth elements and P)can also lead to an increase in the FWHM.However,this effect can be ignored for natural zircon samples with REE contents at a normal level of hundreds to a few thousand ppm.The FWHM and Raman shift can be used as proxies to measure the degree of zircon radiation damage.Using the updated equations to calculate the latest age when zircon began to accumulate radiation damage,a more accurate and more meaningful“radiation damage age”can be obtained.

Recent advances in Raman spectroscopy for skin diagnosis

The skin is the largest organ in humans.It comprises about 16%of our body.Many diseases originate from the skin,including acne vulgaris,skin cancer,fungal skin disease,etc.As a common skin cancer in China,melanoma alone grows at year rate of nearly 4%.Therefore,it is crucial to develop an objective,reliable,accurate,non-invasive,and easy-to-use diagnostic method for skin diseases to support clinical decision-making.Raman spectroscopy is a highly specic imaging technique,which is sensitive,even to the single-cell level in skin diagnosis.Raman spectroscopy provides a pattern of signals with narrow bandwidths,making it a common and essential tool for researching individual characteristics of skin cells.Raman spectroscopy already has a number of clinical applications,including in thyroid,cervical and colorectal cancer.This review will introduce the advantages and recent developments in Raman spectroscopy,before focusing on the advances in skin diagnosis,including the advantages,methods,results,analysis,and notications.Finally,we discuss the current limitations and future progress of Raman spectroscopy in the context of skin diagnosis.

Determination of esophageal squamous cell carcinoma and gastric adenocarcinoma on raw tissue using Raman spectroscopy

BACKGROUND Cancer detection is a global research focus,and novel,rapid,and label-free techniques are being developed for routine clinical practice.This has led to the development of new tools and techniques from the bench side to routine clinical practice.In this study,we present a method that uses Raman spectroscopy(RS)to detect cancer in unstained formalin-fixed,resected specimens of the esophagus and stomach.Our method can record a clear Raman-scattered light spectrum in these specimens,confirming that the Raman-scattered light spectrum changes because of the histological differences in the mucosal tissue.AIM To evaluate the use of Raman-scattered light spectrum for detecting endoscopically resected specimens of esophageal squamous cell carcinoma(SCC)and gastric adenocarcinoma(AC).METHODS We created a Raman device that is suitable for observing living tissues,and attempted to acquire Raman-scattered light spectra in endoscopically resected specimens of six esophageal tissues and 12 gastric tissues.We evaluated formalin-fixed tissues using this technique and captured shifts at multiple locations based on feasibility,ranging from six to 19 locations 200 microns apart in the vertical and horizontal directions.Furthermore,a correlation between the obtained Raman scattered light spectra and histopathological diagnosis was performed.RESULTS We successfully obtained Raman scattered light spectra from all six esophageal and 12 gastric specimens.After data capture,the tissue specimens were sent for histopathological analysis for further processing because RS is a label-free methodology that does not cause tissue destruction or alterations.Based on data analysis of molecular-level substrates,we established cut-off values for the diagnosis of esophageal SCC and gastric AC.By analyzing specific Raman shifts,we developed an algorithm to identify the range of esophageal SCC and gastric AC with an accuracy close to that of histopathological diagnoses.CONCLUSION Our technique provides qualitative information for real-time morphological diagnosis.However,further in vivo evaluations require an excitation light source with low human toxicity and large amounts of data for validation.

Reconstructing in vivo spatially offset Raman spectroscopy of human skin tissue using a GPU-accelerated Monte Carlo platform

As one type of spatially offset Raman spectroscopy(SORS), inverse SORS is particularly suited to in vivo biomedical measurements due to its ring-shaped illumination scheme. To explain inhomogeneous Raman scattering during in vivo inverse SORS measurements, the light–tissue interactions when excitation and regenerated Raman photons propagate in skin tissue were studied using Monte Carlo simulation. An eight-layered skin model was first built based on the latest transmission parameters. Then, an open-source platform, Monte Carlo e Xtreme(MCX), was adapted to study the distribution of 785 nm excitation photons inside the model with an inverse spatially shifted annular beam. The excitation photons were converted to emission photons by an inverse distribution method based on excitation flux with spatial offsets Δs of 1 mm, 2 mm, 3 mm and 5 mm. The intrinsic Raman spectra from separated skin layers were measured by continuous linear scanning to improve the simulation accuracy. The obtained results explain why the spectral detection depth gradually increases with increasing spatial offset, and address how the intrinsic Raman spectrum from deep skin layers is distorted by the reabsorption and scattering of the superficial tissue constituents. Meanwhile, it is demonstrated that the spectral contribution from subcutaneous fat will be improved when the offset increases to 5 mm, and the highest detection efficiency for dermal layer spectral detection could be achieved when Δs = 2 mm. Reasonably good matching between the calculated spectrum and the measured in vivo inverse SORS was achieved, thus demonstrating great utility of our modeling method and an approach to help understand the clinical measurements.

Accurate quantification of TiO_(2)(B)'s phase purity via Raman spectroscopy

Bronze phase titanium dioxide(TiO_(2)(B))could be a promising high-power anode for lithium ion battery.However,TiO_(2)(B)is a metastable material,so the as-synthesized samples are inevitably accompanied by the existence of anatase phases.It has been found that the TiO_(2)(B)'s purity is positively correlated with its electrochemical performance.Herein,we have established an accurate quantification of the TiO_(2)(B)/anatase ratio,by figuring out the function between the purity of TiO_(2)(B)phase in the high purity range and its Raman spectra features in combination of the calibration by the synchrotron radiation X-ray diffraction(XRD).Compared with the time-consuming electrochemical method,the rapid,sensitive and non-destructive features of Raman spectroscopy have made it a promising candidate for determining the purity of TiO_(2)(B).Further,the correlations developed in this work should be instructive in synthesizing pure TiO_(2)(B)and furthermore optimizing its electrochemical charge storage properties.

Unveiling localized electronic properties of ReS2 thin layers at nanoscale using Kelvin force probe microscopy combined with tip-enhanced Raman spectroscopy

Electronic properties of two-dimensional(2D) materials can be strongly modulated by localized strain. The typical spatial resolution of conventional Kelvin probe force microscopy(KPFM) is usually limited in a few hundreds of nanometers, and it is difficult to characterize localized electronic properties of 2D materials at nanoscales. Herein, tip-enhanced Raman spectroscopy(TERS) is proposed to combine with KPFM to break this restriction. TERS scan is conducted on ReS2bubbles deposited on a rough Au thin film to obtain strain distribution by using the Raman peak shift. The localized contact potential difference(CPD) is inversely calculated with a higher spatial resolution by using strain measured by TERS and CPD-strain working curve obtained using conventional KPFM and atomic force microscopy. This method enhances the spatial resolution of CPD measurements and can be potentially used to characterize localized electronic properties of 2D materials.

Vibrational Spectroscopy of Pain Relievers: Traditional and Remote Raman Techniques

The application of vibrational spectroscopy in the pharmaceutical industry is widely investigated, from the quality assurance of the product during the production process control to the final products’ quality control and the authentication of products on the markets. This study focuses on non-contact and noninvasive detection and identification of pain-relievers at 1-5 meters standoff distances. The specimens analyzed include standard laboratory-grade active ingredients and commercially available pain relievers in powder, solid and liquid forms. All the remote measurements captured revealed the Raman signatures of the specimens, with varying peak intensities. To correlate the band intensities captured with the standoff distances between the laser source and the specimens, the intensity ratios of the two prominent peaks of the laboratory grade reference active ingredient (1607 and 1319 cm-1) normalized with 1319 cm-1 are used. The results of the study suggest the viability of standoff Raman spectroscopy for routine monitoring and identification of pharma-ceuticals, including counterfeit pain relievers.

A core-satellite self-assembled SERS aptasensor containing a“biological-silent region”Raman tag for the accurate and ultrasensitive detection of histamine

Herein,a novel interference-free surface-enhanced Raman spectroscopy(SERS)strategy based on magnetic nanoparticles(MNPs)and aptamer-driven assemblies was proposed for the ultrasensitive detection of histamine.A core-satellite SERS aptasensor was constructed by combining aptamer-decorated Fe_(3)O_(4)@Au MNPs(as the recognize probe for histamine)and complementary DNA-modified silver nanoparticles carrying 4-mercaptobenzonitrile(4-MBN)(Ag@4-MBN@Ag-c-DNA)as the SERS signal probe for the indirect detection of histamine.Under an applied magnetic field in the absence of histamine,the assembly gave an intense Raman signal at“Raman biological-silent”region due to 4-MBN.In the presence of histamine,the Ag@4-MBN@Ag-c-DNA SERS-tag was released from the Fe_(3)O_(4)@Au MNPs,thus decreasing the SERS signal.Under optimal conditions,an ultra-low limit of detection of 0.65×10^(-3)ng/mL and a linear range 10^(-2)-10^5 ng/mL on the SERS aptasensor were obtained.The histamine content in four food samples were analyzed using the SERS aptasensor,with the results consistent with those determined by high performance liquid chromatography.The present work highlights the merits of indirect strategies for the ultrasensitive and highly selective SERS detection of small biological molecules in complex matrices.

On-Line Measurement of the Chemical Oxygen Demand in Wastewater in a Pulp and Paper Mill Using Near Infrared Spectroscopy

Although near infrared (NIR) spectroscopy has been evaluated for numerous applications, the number of actual on-line or even on-site industrial applications seems to be very limited. In the present paper, the attempts to produce online predictions of the chemical oxygen demand (COD) in wastewater from a pulp and paper mill using NIR spectroscopy are described. The task was perceived as very challenging, but with a root mean square error of prediction of 149 mg/l, roughly corresponding to 1/10 of the studied concentration interval, this attempt was deemed as successful. This result was obtained by using partial least squares model regression, interpolated reference values for calibration purposes, and by evenly distributing the calibration data in the concentration space. This work may also represent the first industrial application of online COD measurements in wastewater using NIR spectroscopy.

In situ Raman spectroscopic quantification of CH4–CO2 mixture: application to fluid inclusions hosted in quartz veins from the Longmaxi Formation shales in Sichuan Basin, southwestern China

We re-evaluate the Raman spectroscopic quantification of the molar ratio and pressure for CH4–CO2 mixtures.Firstly,the Raman quantification factors of CH4 and CO2 increase with rising pressure at room temperature,indicating that Raman quantification of CH4/CO2 molar ratio can be applied to those fluid inclusions(FIs)with high internal pressure(i.e.,>15 MPa).Secondly,the v1(CH4)peak position shifts to lower wavenumber with increasing pressure at constant temperature,confirming that the v1(CH4)peak position can be used to calculate the fluid pressure.However,this method should be carefully calibrated before applying to FI analyses because large discrepancies exist among the reported v1(CH4)-P curves,especially in the highpressure range.These calibrations are applied to CH4-rich FIs in quartz veins of the Silurian Longmaxi black shales in southern Sichuan Basin.The vapor phases of these FIs are mainly composed of CH4 and minor CO2,with CO2 molar fractions from4.4%to 7.4%.The pressure of single-phase gas FI ranges from 103.65 to 128.35 MPa at room temperature,which is higher than previously reported.Thermodynamic calculations supported the presence of extremely high-pressure CH4-saturated fluid(218.03–256.82 MPa at 200°C),which may be responsible for the expulsion of CH4 to adjacent reservoirs.

Different angle-resolved polarization configurations of Raman spectroscopy: A case on the basal and edge plane of two-dimensional materials

Angle-resolved polarized Raman（ARPR） spectroscopy can be utilized to assign the Raman modes based on crystal symmetry and Raman selection rules and also to characterize the crystallographic orientation of anisotropic materials.However, polarized Raman measurements can be implemented by several different configurations and thus lead to different results. In this work, we systematically analyze three typical polarization configurations： 1） to change the polarization of the incident laser, 2） to rotate the sample, and 3） to set a half-wave plate in the common optical path of incident laser and scattered Raman signal to simultaneously vary their polarization directions. We provide a general approach of polarization analysis on the Raman intensity under the three polarization configurations and demonstrate that the latter two cases are equivalent to each other. Because the basal plane of highly ordered pyrolytic graphite（HOPG） exhibits isotropic feature and its edge plane is highly anisotropic, HOPG can be treated as a modelling system to study ARPR spectroscopy of twodimensional materials on their basal and edge planes. Therefore, we verify the ARPR behaviors of HOPG on its basal and edge planes at three different polarization configurations. The orientation direction of HOPG edge plane can be accurately determined by the angle-resolved polarization-dependent G mode intensity without rotating sample, which shows potential application for orientation determination of other anisotropic and vertically standing two-dimensional materials and other materials.

Antioxidative Protective Effect of Icariin on the FeSO_4/H_2O_2-damaged Human Sperm Based on Confocal Raman Micro-spectroscopy

Oxidative stress is implicated in male infertility and significantly higher reactive oxygen species are detected in 25% of infertile males. Although different agents of various alternative medicines, including traditional Chinese medicine, have been tried with varying success, evidence remains limited on whether and how much herbs or supplements might help increase the anti-oxidant ability of the sperm. This study examined the anti-oxidative effects of icariin, a flavonoid isolated from Herba Epimedii, on the human sperm. We prepared the FeSO4/H202-damaged human sperms, which were co-cultured with icariin in vitro, and then observed the changes of the sperm by employing Raman mi- cro-spectroscopy. The results showed that Raman mapping with a 514 nm excitation laser allowed clear differentiation of the nucleus, neck, and, in particular, the mitochondria-rich middle piece of a human sperm cell. The effect oficariin on different organelles of the sperm was quantified by localized spectral Raman signatures obtained within milli-seconds, and icariin could keep the ＂Raman fingerprint＂ of the human sperm the same as the control groups, suggesting that icariin could protect the human sperm from being damaged by FeSO4/H202. Icariin may serve as a tonifying and replenishing agent of herbal origin for enhancing reproductive fimctions.

Existence of Al2F-7^- in molten MF–AlF3(M = K, Cs) systems as determined by Raman spectroscopy and structural simulation

The molten mixtures of alkali metal fluorides and aluminum fluoride are applied as aluminum electrolytes or brazing fluxes.However,the presence of Al2F-7^-in such molten systems is disputed.In the present study,MF-AlF3(M=K,Cs)systems with molar ratios<1 were studied by in-situ Raman spectroscopy and molecular simulation.The results show that,in addition to AlF6^(3-),AlF5^(2-),and AlF4^-,the systems also contained Al2F-7^-.The characteristic bands in the Raman spectra belonging to Al2F-7^-were located at about 225 cm^-1,315 cm^-1,479 cm^-1,and 720 cm^-1.There are two possible structures of Al2F-7^-,which belong to the D3d and D3hpoint groups.Both of these structures are linear,and their single-point energies were found to differ by only 0.31 kcal/mol.

Optical penetration of surface-enhanced micro-scale spatial offset Raman spectroscopy in turbid gel and biological tissue

The limited penetration of photons in biological tissue restricts the deep-tissue detection and imaging application.The micro-scale spatially offset Raman spectroscopy(micro-SORS)with an optical fiber probe,colleting photons from deeper regions by offsetting the position of laser excitation from the collection optics in a range of hundreds of microns,shows great potential to be integrated with endoscopy for inside-body noninvasive detection by circumventing this restric-tion,particularly with the combination of surface-enhanced Raman spectroscopy(SERS).However,a detailed tissue penetration study of micro-SORS in combination with SERS is still lacking.Herein,we compared the signal decay of enhanced Raman nanotags through the tissue phantom of agarose gel and the biological tissue of porcine muscle in the near-infrared(NIR)region using a portable Raman spectrometer with a micro-SORS probe(2.1 mm in diameter)and a conventional hand-held probe(9.7mm in diameter).Two kinds of Raman nanotags were prepared from gold nanorods decorated with the nonresonant(4-nitrobenzenethiol)or resonant Raman reporter molecules(IR-780 iodide).The SERS measurements show that the penetration depths of two Raman nanotags are both over 2 cm in agarose gel and 3 mm in porcine muscle.The depth could be improved to over 4 cm in agarose gel and 5 mm in porcine tissue when using the micro-SORS system.This demonstrates the superiority of optical-fiber micro-SORS system over the conventional Raman detection for the detection of nanotags in deeper layers in the turbid medium and biological tissue,offering the possibility of combining the micro-SORS technique with SERS for noninvasive in vivo endoscopy-integrated clinical application.

Sensitive and Label-Free Detection of Protein Secondary Structure by Amide Ⅲ Spectral Signals using Surface-Enhanced Raman Spectroscopy

Proteins and peptides perform a vital role in living systems, however it remains a challenge for accurate description of proteins at the molecular level. Despite that surface-enhanced Raman spectroscopy (SERS) can provide the intrinsic fingerprint information of samples with ultrahigh sensitivity, it suffers from the poor reproducibility and reliability. Herein, we demonstrate that the silver nanorod array fabricated by an oblique angle deposition method is a powerful substrate for SERS to probe the protein secondary structures without exogenous labels. With this method, the SERS signals of two typical proteins (lysozyme and cytochrome c) are successfully obtained. Additionally, by analyzing the spectral signals of the amide Ⅲ of protein backbone, the influence of concentration on the folding status of proteins has been elucidated. With the concentration increasing, the components of α-helix and β-sheet structures of lysozyme increase while the secondary structures of cytochrome c almost keep constant. The SERS method in this work offers an effective optical marker to characterize the structures of proteins.

Classification and Quantitative Analysis of Azithromycin Tablets by Raman Spectroscopy and Chemometrics

Raman spectroscopy has been proven a noninvasive technique with high potential in pharmaceutical industry. In this study, micro Raman technique and chemometric tools were used for identification of azithromycin (AZM) tablets by different manufacturers and quantitative analysis of the active pharmaceutical ingredient (API) in the samples. Support vector machine (SVM), Bayes classifier and K-nearest neighbour (KNN) were employed for identification, partial least squares (PLS) regression was used for quantitative determination, and interval partial least squares (iPLS) and Monte Carlo based uninformative variable elimination (MC-UVE) methods were used to select informative variables for improving the models. The results show that all the samples can be classified into groups by manufacturers with high accuracy, and the correlation coefficient between the predicted API concentrations and reference values is as high as 0.96. Therefore, micro Raman spectroscopy coupled with chemometrics may be a fast and powerful tool for identification and quantitative determination of pharmaceutical tablets.

Surface-enhanced resonance Raman scattering spectroscopy of single R6G molecules

Surface-enhanced resonance Raman scattering （SERRS） of Rhodamine 6G （R6G） adsorbed on colloidal silver clusters has been studied. Based on the great enhancement of the Raman signal and the quench of the fluorescence, the SERRS spectra of R6G were recorded for the samples of dye colloidal solution with different concentrations. Spectral inhomogeneity behaviours from single molecules in the dried sample films were observed with complementary evidences, such as spectral polarization, spectral diffusion, intensity fluctuation of vibrational lines and even ＂breathing＂ of the molecules. Sequential spectra observed from a liquid sample with an average of 0.3 dye molecules in the probed volume exhibited the expected Poisson distribution for actually measuring 0, 1 or 2 molecules. Difference between the SERRS spectra of R6G excited by linearly and circularly polarized light were experimentally measured.

Synthesis of nitrogen-doped single-walled carbon nanotubes and monitoring of doping by Raman spectroscopy

Nitrogen-doped single-walled carbon nanotubes （CNx-SWNTs） with tunable dopant concentrations were synthesized by chemical vapor deposition （CVD）, and their structure and elemental composition were characterized by using transmission electron microscopy （TEM） in combination with electron energy loss spectroscopy （EELS）. By comparing the Raman spectra of pristine and doped nanotubes, we observed the doping-induced Raman G band phonon stiffening and 2D band phonon softening, both of which reflect doping-induced renormalization of the electron and phonon energies in the nan- otubes and behave as expected in accord with the n-type doping effect. On the basis of first principles calculations of the distribution of delocalized carrier density in both the pristine and doped nanotubes, we show how the n-type doping occurs when nitrogen heteroatoms are substitutionally incorporated into the honeycomb tube-shell carbon lattice.