Introduction: Correct adjustment of dry weight after hemodialysis (HD) with no signs of hypervolemia is important. Intradialytic hypotension (IDH) is the most common complication during HD. IDH occurs in 15% to 30% an...Introduction: Correct adjustment of dry weight after hemodialysis (HD) with no signs of hypervolemia is important. Intradialytic hypotension (IDH) is the most common complication during HD. IDH occurs in 15% to 30% and possibly in up to 50% of dialysis sessions. IDH augments mortality essentially due to chronic overhydration and the inability to reach the proper dry weight. On-line hemodiafiltration (ol-HDF) has been reported to reduce the frequency of IDH. The aim of this study was to assess the effect of ol-HDF on hemodynamic stability and dry weight adjustment compared with low-flux HD. Methods: IDH-prone HD patients at our center were enrolled. This study was designed as a crossover trial with two phases (A arm: low-flux HD for 8 weeks followed by ol-HDF for 8 weeks vs. B arm: ol-HDF for 8 weeks followed by low-flux HD for 8 weeks) and two treatment arms (ol-HDF vs. low-flux HD), each phase lasting 8 weeks. We measured the proportion of body water using a body composition monitor (BCM). Results: In a comparison of the systolic blood pressure (SBP) and diastolic blood pressure (DBP) reductions from the baseline blood pressure between the HD and ol-HDF groups, statistically significant differences were observed only in the SBP of the B arm (SBP: HD vs. HDF, -9.83 ± 6.64 vs. -4.62 ± 1.61 mmHg, p = 0.036;DBP: HD vs. HDF, -3.29 ± 4.05 vs. -1.86 ± 1.49 mmHg, p = 0.261). Neither the mean of the interdialytic body weight gains nor the frequency of IDH was different between the A and B arms (p = 0.817 and p = 0.562, respectively). In terms of dialysis modality, there were no significant differences in the amount of overhydration between the conventional HD and ol-HDF groups during the two study phases, as measured by the BCM (A arm: p = 0.875, B arm: p = 0.655). Conclusion: Our study did not show a better benefit of ol-HDF to reach the dry weight compared with low-flux HD in IDH-prone patients.展开更多
This paper studies a strongly convergent inertial forward-backward-forward algorithm for the variational inequality problem in Hilbert spaces.In our convergence analysis,we do not assume the on-line rule of the inerti...This paper studies a strongly convergent inertial forward-backward-forward algorithm for the variational inequality problem in Hilbert spaces.In our convergence analysis,we do not assume the on-line rule of the inertial parameters and the iterates,which have been assumed by several authors whenever a strongly convergent algorithm with an inertial extrapolation step is proposed for a variational inequality problem.Consequently,our proof arguments are different from what is obtainable in the relevant literature.Finally,we give numerical tests to confirm the theoretical analysis and show that our proposed algorithm is superior to related ones in the literature.展开更多
The work is dedicated to develop a one-step eco-friendly method to prepare antibacterial polyethylene terephthalate(PET).We report a one-step eco-friendly method to manufacture antibacterial PET via on-line amination ...The work is dedicated to develop a one-step eco-friendly method to prepare antibacterial polyethylene terephthalate(PET).We report a one-step eco-friendly method to manufacture antibacterial PET via on-line amination reaction by melt coextrusion.Beside evenly mixing of poly(hexamethylene guanidine)(PHMG)and PET in the melt coextrusion procedure,the amination reaction also occurred between PHMG and PET under high temperature(230-270℃).The antibacterial ability of composite PET showed obvious PHMG concentration dependence,and antibacterial activity reached more than 99%when PHMG content was 2.5 wt%.Moreover,LIVE/DEAD fluorescence test further confirmed that the composite PET could kill bacteria quickly and efiectively(within 30 min);while negligible cytotoxicity was observed to HSF and HUVEC cells.Onestep eco-friendly fabrication of composite antibacterial PET was accomplished by on-line melt coextrusion.The composite antibacterial PET has potential use in multiple fields to combat with pathogenic including textiles,packaging materials,decoration materials and biomedical devices,etc.展开更多
BACKGROUND Diabetic nephropathy(DN)is frequently seen in the development of diabetes mellitus,and its pathogenic factors are complicated.Its current treatment is controversial,and there is a lack of a relevant efficac...BACKGROUND Diabetic nephropathy(DN)is frequently seen in the development of diabetes mellitus,and its pathogenic factors are complicated.Its current treatment is controversial,and there is a lack of a relevant efficacy prediction model.AIM To determine the effects of paricalcitol combined with hemodiafiltration on bonemetabolism-related indexes in patients with DN and chronic renal failure(CRF),and to construct an efficacy prediction model.METHODS We retrospectively analyzed 422 patients with DN and CRF treated in Cangzhou Central Hospital between May 2020 and May 2022.We selected 94 patients who met the inclusion and exclusion criteria.Patients were assigned to a dialysis group(n=45)and a joint group(n=49)in relation to therapeutic regimen.The clinical efficacy of the two groups was compared after treatment.The changes in laboratory indexes after treatment were evaluated,and the two groups were compared for the incidence of adverse reactions.The predictive value of laboratory indexes on the clinical efficacy on patients was analyzed.RESULTS The dialysis group showed a notably worse improvement in clinical efficacy than the joint group(P=0.017).After treatment,the joint group showed notably lower serum levels of serum creatinine,uric acid(UA)and blood urea nitrogen(BUN)than the dialysis group(P<0.05).After treatment,the joint group had lower serum levels of phosphorus,procollagen type I amino-terminal propeptide(PINP)and intact parathyroid hormone than the dialysis group,but a higher calcium level(P<0.001).Both groups had a similar incidence of adverse reactions(P>0.05).According to least absolute shrinkage and selection operator regression analysis,UA,BUN,phosphorus and PINP were related to treatment efficacy.According to further comparison,the non-improvement group had higher risk scores than the improvement group(P<0.0001),and the area under the curve of the risk score in efficacy prediction was 0.945.CONCLUSION For treatment of CRF and DN,combined paricalcitol and hemodiafiltration can deliver higher clinical efficacy and improve the bone metabolism of patients,with good safety.展开更多
The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sens...The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sensor (AE) with motor current sensor was presented. The parallel communication between control system of machine tools, the monitoring intelligent system,and several decision-making systems for identifying tool cutting state was established It can auto - matically select the sensor way ,monitoring mode and identifying method in machining process- ing so as to build a successful and effective intelligent system for on -line and real-time moni- toring cutting tool states in FMS.展开更多
This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current te...This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current test, which enable the monitoring result to be consistent with the corrosion of actual condenser tubes. Localized corrosion rate of condenser tubes can be measured indirectly by a galvanic couple made up of tube segments with and without pits. Using this technology, corrosion problems can be found in time and accurately, and anticorrosive measures be made more economic and effective. Applications in two power plants showed the corrosion measurements are fast and accurate.展开更多
The effects of on-line solution, off-line solution and aging heat treatment on the microstructure and hardness of the die-cast AZ91D alloys were investigated. Brinell hardness of die-cast AZ91D alloy increases through...The effects of on-line solution, off-line solution and aging heat treatment on the microstructure and hardness of the die-cast AZ91D alloys were investigated. Brinell hardness of die-cast AZ91D alloy increases through on-line solution and off-line aging treatment but decreases after off-line solution treatment. By X-ray diffractometry, optical microscopy, differential thermal analysis, scanning electron microscopy and X-ray energy dispersive spectroscopy, it is found that the microstructures of the die-cast AZ91D magnesium alloy before and after on-line solution and off-line aging are similar, consisting of α-Mg and β-Al12Mg17. The precipitation of Al element is prevented by on-line solution so that the effect of solid solution strengthening is enhanced. The β-Al12Mg17 phases precipitate from supersaturated Mg solid solution after off-line aging treatment, and lead to microstructure refinement of AZ91D alloy, so the effect of precipitation hardening is enhanced. The β-Al12Mg17 phases dissolve in the substructure after off-line solution treatment, which leads to that the grain boundary strengthening phase is reduced significantly and the hardness of die cast AZ91D is reduced.展开更多
A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The te...A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The technique can detect breakage of drills having diameter over 0.8mm,turning cutter crack of area over 0.2mm,and the ultimate wear.The principle,system construction,experimental method and result of the technique are discussed.The ratio of success in detection approaches 96% or higher.展开更多
文摘Introduction: Correct adjustment of dry weight after hemodialysis (HD) with no signs of hypervolemia is important. Intradialytic hypotension (IDH) is the most common complication during HD. IDH occurs in 15% to 30% and possibly in up to 50% of dialysis sessions. IDH augments mortality essentially due to chronic overhydration and the inability to reach the proper dry weight. On-line hemodiafiltration (ol-HDF) has been reported to reduce the frequency of IDH. The aim of this study was to assess the effect of ol-HDF on hemodynamic stability and dry weight adjustment compared with low-flux HD. Methods: IDH-prone HD patients at our center were enrolled. This study was designed as a crossover trial with two phases (A arm: low-flux HD for 8 weeks followed by ol-HDF for 8 weeks vs. B arm: ol-HDF for 8 weeks followed by low-flux HD for 8 weeks) and two treatment arms (ol-HDF vs. low-flux HD), each phase lasting 8 weeks. We measured the proportion of body water using a body composition monitor (BCM). Results: In a comparison of the systolic blood pressure (SBP) and diastolic blood pressure (DBP) reductions from the baseline blood pressure between the HD and ol-HDF groups, statistically significant differences were observed only in the SBP of the B arm (SBP: HD vs. HDF, -9.83 ± 6.64 vs. -4.62 ± 1.61 mmHg, p = 0.036;DBP: HD vs. HDF, -3.29 ± 4.05 vs. -1.86 ± 1.49 mmHg, p = 0.261). Neither the mean of the interdialytic body weight gains nor the frequency of IDH was different between the A and B arms (p = 0.817 and p = 0.562, respectively). In terms of dialysis modality, there were no significant differences in the amount of overhydration between the conventional HD and ol-HDF groups during the two study phases, as measured by the BCM (A arm: p = 0.875, B arm: p = 0.655). Conclusion: Our study did not show a better benefit of ol-HDF to reach the dry weight compared with low-flux HD in IDH-prone patients.
文摘This paper studies a strongly convergent inertial forward-backward-forward algorithm for the variational inequality problem in Hilbert spaces.In our convergence analysis,we do not assume the on-line rule of the inertial parameters and the iterates,which have been assumed by several authors whenever a strongly convergent algorithm with an inertial extrapolation step is proposed for a variational inequality problem.Consequently,our proof arguments are different from what is obtainable in the relevant literature.Finally,we give numerical tests to confirm the theoretical analysis and show that our proposed algorithm is superior to related ones in the literature.
基金Funded by the National Natural Science Foundation of China(No.51703169)Key Program of Science and Technology of Jieyang City(No.2019016)Key Research and Development Program of Shandong Province of China(No.2019JZZY010338)。
文摘The work is dedicated to develop a one-step eco-friendly method to prepare antibacterial polyethylene terephthalate(PET).We report a one-step eco-friendly method to manufacture antibacterial PET via on-line amination reaction by melt coextrusion.Beside evenly mixing of poly(hexamethylene guanidine)(PHMG)and PET in the melt coextrusion procedure,the amination reaction also occurred between PHMG and PET under high temperature(230-270℃).The antibacterial ability of composite PET showed obvious PHMG concentration dependence,and antibacterial activity reached more than 99%when PHMG content was 2.5 wt%.Moreover,LIVE/DEAD fluorescence test further confirmed that the composite PET could kill bacteria quickly and efiectively(within 30 min);while negligible cytotoxicity was observed to HSF and HUVEC cells.Onestep eco-friendly fabrication of composite antibacterial PET was accomplished by on-line melt coextrusion.The composite antibacterial PET has potential use in multiple fields to combat with pathogenic including textiles,packaging materials,decoration materials and biomedical devices,etc.
文摘BACKGROUND Diabetic nephropathy(DN)is frequently seen in the development of diabetes mellitus,and its pathogenic factors are complicated.Its current treatment is controversial,and there is a lack of a relevant efficacy prediction model.AIM To determine the effects of paricalcitol combined with hemodiafiltration on bonemetabolism-related indexes in patients with DN and chronic renal failure(CRF),and to construct an efficacy prediction model.METHODS We retrospectively analyzed 422 patients with DN and CRF treated in Cangzhou Central Hospital between May 2020 and May 2022.We selected 94 patients who met the inclusion and exclusion criteria.Patients were assigned to a dialysis group(n=45)and a joint group(n=49)in relation to therapeutic regimen.The clinical efficacy of the two groups was compared after treatment.The changes in laboratory indexes after treatment were evaluated,and the two groups were compared for the incidence of adverse reactions.The predictive value of laboratory indexes on the clinical efficacy on patients was analyzed.RESULTS The dialysis group showed a notably worse improvement in clinical efficacy than the joint group(P=0.017).After treatment,the joint group showed notably lower serum levels of serum creatinine,uric acid(UA)and blood urea nitrogen(BUN)than the dialysis group(P<0.05).After treatment,the joint group had lower serum levels of phosphorus,procollagen type I amino-terminal propeptide(PINP)and intact parathyroid hormone than the dialysis group,but a higher calcium level(P<0.001).Both groups had a similar incidence of adverse reactions(P>0.05).According to least absolute shrinkage and selection operator regression analysis,UA,BUN,phosphorus and PINP were related to treatment efficacy.According to further comparison,the non-improvement group had higher risk scores than the improvement group(P<0.0001),and the area under the curve of the risk score in efficacy prediction was 0.945.CONCLUSION For treatment of CRF and DN,combined paricalcitol and hemodiafiltration can deliver higher clinical efficacy and improve the bone metabolism of patients,with good safety.
文摘The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sensor (AE) with motor current sensor was presented. The parallel communication between control system of machine tools, the monitoring intelligent system,and several decision-making systems for identifying tool cutting state was established It can auto - matically select the sensor way ,monitoring mode and identifying method in machining process- ing so as to build a successful and effective intelligent system for on -line and real-time moni- toring cutting tool states in FMS.
文摘This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current test, which enable the monitoring result to be consistent with the corrosion of actual condenser tubes. Localized corrosion rate of condenser tubes can be measured indirectly by a galvanic couple made up of tube segments with and without pits. Using this technology, corrosion problems can be found in time and accurately, and anticorrosive measures be made more economic and effective. Applications in two power plants showed the corrosion measurements are fast and accurate.
基金Projects (2011BAE22B01, 2011BAE22B06) supported by the National Key Technologies R&D Program During the 12th Five-Year Plan Period of ChinaProject (2010NC018) supported by the Innovation Fund of Inner Mongolia University of Science and Technology, China
文摘The effects of on-line solution, off-line solution and aging heat treatment on the microstructure and hardness of the die-cast AZ91D alloys were investigated. Brinell hardness of die-cast AZ91D alloy increases through on-line solution and off-line aging treatment but decreases after off-line solution treatment. By X-ray diffractometry, optical microscopy, differential thermal analysis, scanning electron microscopy and X-ray energy dispersive spectroscopy, it is found that the microstructures of the die-cast AZ91D magnesium alloy before and after on-line solution and off-line aging are similar, consisting of α-Mg and β-Al12Mg17. The precipitation of Al element is prevented by on-line solution so that the effect of solid solution strengthening is enhanced. The β-Al12Mg17 phases precipitate from supersaturated Mg solid solution after off-line aging treatment, and lead to microstructure refinement of AZ91D alloy, so the effect of precipitation hardening is enhanced. The β-Al12Mg17 phases dissolve in the substructure after off-line solution treatment, which leads to that the grain boundary strengthening phase is reduced significantly and the hardness of die cast AZ91D is reduced.
文摘A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The technique can detect breakage of drills having diameter over 0.8mm,turning cutter crack of area over 0.2mm,and the ultimate wear.The principle,system construction,experimental method and result of the technique are discussed.The ratio of success in detection approaches 96% or higher.
