The interior of a high-pressure die-casting is of an unsatisfactory quality. Engine blocks made with this die casting process show lower specific engine performance. Pressure die-casting can hardly be heat treated for...The interior of a high-pressure die-casting is of an unsatisfactory quality. Engine blocks made with this die casting process show lower specific engine performance. Pressure die-casting can hardly be heat treated for obvious reasons. PSM (Precision Sand Molds) process uses sand and organic binder to generate a mold and even allows the manufacturing of complex diesel engine blocks in aluminum alloys. Combined technologies are available for semi-permanent mold castings with cores and castings made in Precision Sand Molds with organic binders. Castings are placed into the special heat treatment furnace immediately after pouring without the operations in stand alone machinery. This patented Sand Lion 3- in-1 technology processes hot castings and carries out three (3) foundry processes simultaneously in one (1) automated machine: 1) De-coring and sand removal; 2) Thermal sand reclamation; 3) Solution heat treatment of castings. The combination of several main casting processes is reflected in significant reductions of energy consumption, of production costs, and improving the quality of the castings. Audits in foundries using the 3-in-l process showed an average reduction in production costs of more than 30%.展开更多
Transparent,smooth and dense zinc tin oxide (ZTO) thin films have been successfully produced by using a new precursor solution,zinc acetate and tin(II) 2-ethylhexanoate mixed with 2-ethanolamine in methoxyethanol.The ...Transparent,smooth and dense zinc tin oxide (ZTO) thin films have been successfully produced by using a new precursor solution,zinc acetate and tin(II) 2-ethylhexanoate mixed with 2-ethanolamine in methoxyethanol.The ZTO films have been prepared by spin-coating,followed by thermal treatment in oxygen atmosphere.The morphology,composition,crystallinity and band gap energy (Eg) of the ZTO thin films have been characterized by Atomic Force Microscopy (AFM),Atomic Emission Spectrometry (AES),X-ray Diffraction (XRD) and UV-vis spectrophotometry.The conductivity of ZTO is about 9.8×10-9 S/cm,as estimated from the current-voltage (I-V) curve.The effect of the thermal treatment process on the morphology of ZTO thin films is also discussed.展开更多
文摘The interior of a high-pressure die-casting is of an unsatisfactory quality. Engine blocks made with this die casting process show lower specific engine performance. Pressure die-casting can hardly be heat treated for obvious reasons. PSM (Precision Sand Molds) process uses sand and organic binder to generate a mold and even allows the manufacturing of complex diesel engine blocks in aluminum alloys. Combined technologies are available for semi-permanent mold castings with cores and castings made in Precision Sand Molds with organic binders. Castings are placed into the special heat treatment furnace immediately after pouring without the operations in stand alone machinery. This patented Sand Lion 3- in-1 technology processes hot castings and carries out three (3) foundry processes simultaneously in one (1) automated machine: 1) De-coring and sand removal; 2) Thermal sand reclamation; 3) Solution heat treatment of castings. The combination of several main casting processes is reflected in significant reductions of energy consumption, of production costs, and improving the quality of the castings. Audits in foundries using the 3-in-l process showed an average reduction in production costs of more than 30%.
基金supported by the National Natural Science Foundation of China (50990060)
文摘Transparent,smooth and dense zinc tin oxide (ZTO) thin films have been successfully produced by using a new precursor solution,zinc acetate and tin(II) 2-ethylhexanoate mixed with 2-ethanolamine in methoxyethanol.The ZTO films have been prepared by spin-coating,followed by thermal treatment in oxygen atmosphere.The morphology,composition,crystallinity and band gap energy (Eg) of the ZTO thin films have been characterized by Atomic Force Microscopy (AFM),Atomic Emission Spectrometry (AES),X-ray Diffraction (XRD) and UV-vis spectrophotometry.The conductivity of ZTO is about 9.8×10-9 S/cm,as estimated from the current-voltage (I-V) curve.The effect of the thermal treatment process on the morphology of ZTO thin films is also discussed.