Big Data Application Simulation Platform Design for Onboard Distributed Processing of LEO Mega-Constellation Networks

Due to the restricted satellite payloads in LEO mega-constellation networks(LMCNs),remote sensing image analysis,online learning and other big data services desirably need onboard distributed processing(OBDP).In existing technologies,the efficiency of big data applications(BDAs)in distributed systems hinges on the stable-state and low-latency links between worker nodes.However,LMCNs with high-dynamic nodes and long-distance links can not provide the above conditions,which makes the performance of OBDP hard to be intuitively measured.To bridge this gap,a multidimensional simulation platform is indispensable that can simulate the network environment of LMCNs and put BDAs in it for performance testing.Using STK's APIs and parallel computing framework,we achieve real-time simulation for thousands of satellite nodes,which are mapped as application nodes through software defined network(SDN)and container technologies.We elaborate the architecture and mechanism of the simulation platform,and take the Starlink and Hadoop as realistic examples for simulations.The results indicate that LMCNs have dynamic end-to-end latency which fluctuates periodically with the constellation movement.Compared to ground data center networks(GDCNs),LMCNs deteriorate the computing and storage job throughput,which can be alleviated by the utilization of erasure codes and data flow scheduling of worker nodes.

Investigations of the mechanical response of dummy HTPB propellant grain under ultrahigh acceleration overload conditions using onboard flight-test measurements

In this paper,to study the mechanical responses of a solid propellant subjected to ultrahigh acceleration overload during the gun-launch process,specifically designed projectile flight tests with an onboard measurement system were performed.Two projectiles containing dummy HTPB propellant grains were successfully recovered after the flight tests with an ultrahigh acceleration overload value of 8100 g.The onboard-measured time-resolved axial displacement,contact stress and overload values were successfully obtained and analysed.Uniaxial compression tests of the dummy HTPB propellant used in the gunlaunched tests were carried out at low and intermediate strain rates to characterize the propellant's dynamic properties.A linear viscoelastic constitutive model was employed and applied in finite-element simulations of the projectile-launching process.During the launch process,the dummy propellant grain exhibited large deformation due to the high acceleration overload,possibly leading to friction between the motor case and propellant grain.The calculated contact stress showed good agreement with the experimental results,though discrepancies in the overall displacement of the dummy propellant grain were observed.The dynamic mechanical response process of the dummy propellant grain was analysed in detail.The results can be used to estimate the structural integrity of the analysed dummy propellant grain during the gun-launch process.

The New Fault Tolerant Onboard Computer for Microsatellite Missions

This paper describes an onboard computer with dual processing modules. Each processing module is composed of 32 bit ARM reduced instruction set computer processor and other commercial-off-the-shelf devices. A set of fault handling mechanisms is implemented in the computer system, which enables the system to tolerate a single fault. The onboard software is organized around a set of processes that communicate among each other through a routing process. Meeting an extremely tight set of constraints that include mass, volume, power consumption and space environmental conditions, the fault-tolerant onboard computer has excellent data processing capability that can meet the erquirements of micro-satellite missions.

MODELING AND NUMERICAL SIMULATION OF ONBOARD MOLECULAR SIEVE OXYGEN GENERATION SYSTEM

A mathematical model for simulating concentric-bed and other components of molecular sieve oxygen concentrator is established. In the model, the binary Langmuir equilibrium adsorption equation is adopted to describe the adsorption performance of the adsorbent, the linear driving force (LDF) model is used to describe the mass transfer rate, and the thermal effect during adsorption is considered. The finite difference method is used in simulation and comparison. Numerical results have a reasonable agreement with the experimental research.

Design on Model-based Visualization System for Civil Aircraft Airborne Equipment Identification Test

To meet the needs of complex system equipment testing and realize the visual management of different test projects,this article establishes a test project management system based on the actual situation of aviation equipment testing system and the concept of big data,using visual data management and analysis techniques.This system solves the comprehensive management of multi-type test projects.Combined with the actual engineering verification process,it can be found that the system can realize the visual management of test projects and effectively ensure the smooth completion of the identification test project of a certain type of aircraft′s complex system.

Design of Central Management & Control Unit for Onboard High-Speed Data Handling System

The Main Optical Telescope (MOT) is an important payload of the Space Solar Telescope (SST) with various instruments and observation modes. Its real-time data handling and management and control tasks are arduous. Based on the advanced techniques of foreign countries, an improved structure of onboard data handling systems feasible for SST, is proposed. This article concentrated on the development of a Central Management & Control Unit (MCU) based on FPGA and DSP. Through reconfigurating the FPGA and DSP programs, the prototype could perform different tasks. Thus the inheritability of the whole system is improved. The completed dual-channel prototype proves that the system meets all requirements of the MOT. Its high reliability and safety features also meet the requirements under harsh conditions such as mine detection.

Precise Orbit Determination for the FY-3C Satellite Using Onboard BDS and GPS Observations from 2013, 2015, and 2017

Using the FengYun-3C(FY-3C)onboard BeiDou Navigation Satellite System(BDS)and Global Positioning System(GPS)data from 2013 to 2017,this study investigates the performance and contribution of BDS to precise orbit determination(POD)for a low-Earth orbit(LEO).The overlap comparison result indicates that code bias correction of BDS can improve the POD accuracy by 12.4%.The multi-year averaged one-dimensional(1D)root mean square(RMS)of the overlapping orbit differences(OODs)for the GPS-only solution is 2.0,1.7,and 1.5 cm,respectively,during the 2013,2015,and 2017 periods.The 1D RMS for the BDS-only solution is 150.9,115.0,and 47.4 cm,respectively,during the 2013,2015,and 2017 periods,which is much worse than the GPS-only solution due to the regional system of BDS and the few BDS channels of the FY-3C receiver.For the BDS and GPS combined solution(also known as the GC combined solution),the averaged 1D RMS is 2.5,2.3,and 1.6 cm,respectively,in 2013,2015,and 2017,while the GC combined POD presents a significant accuracy improvement after the exclusion of geostationary Earth orbit(GEO)satellites.The main reason for the improvement seen after this exclusion is the unfavorable satellite tracking geometry and poor orbit accuracy of GEO satellites.The accuracy of BDS-only and GC combined solutions have gradually improved from 2013 to 2017,thanks to improvements in the accuracy of International GNSS Service(IGS)orbit and clock products in recent years,especially the availability of a high-frequency satellite clock product(30 s sampling interval)since 2015.Moreover,the GC POD(without GEO)was able to achieve slightly better accuracy than the GPS-only POD in 2017,indicating that the fusion of BDS and GPS observations can improve the accuracy of LEO POD.GC combined POD can significantly improve the reliability of LEO POD,simply due to system redundancy.An increased contribution of BDS to LEO POD can be expected with the launch of more BDS satellites and with further improvements in the accuracy of BDS satellite products in the near future.

Performance Evaluation of a Permanent Magnet Electric-Drive- Reconfigured Onboard Charger with Active Power Factor Correction

This paper presents a comprehensive charging operation for an electric-drive-reconfigured onboard charger(EDROC)with active power factor correction(APFC).The charging topology exclusively utilizes the three-phase permanent magnet synchronous motor(PMSM)propulsion system as a three-channel boost-type converter in which only a contactor and a small diode bridge are added.First,the operation scenario of the EDROC is introduced.Second,the relationship between electromagnetic torque and rotor position is investigated.Third,the current ripple cancellation of the EDROC is discussed in detail.Moreover,to implement the single-phase APFC along with charging voltage/current regulation of propulsion battery,control strategies including current balancing and synchronous/interleaving PWM strategies are incorporated.Finally,200W proof-of-concept prototype-based tests are conducted under different operation scenarios.

基于Onboard SDK的无人机自主飞行控制及精准拍照技术研究

本文对DJI Onboard SDK数据库以及OSDK线程模型进行概述,并对无人机飞行控制以及精准拍照相关的无人机定位和视觉跟踪技术展开研究,后将AI技术应用到无人机自主分析控制及精准拍照中,最后对抓拍设计流程图以及现场拍照效果进行分析。采用文中所提无人机自主飞行控制及精准拍照技术后,可实现对基塔5min内完成全自主飞行,超过一般的飞手水平,单点对准、变焦、对焦、拍照的时间由7~8s优化到3~4s内完成,具有显著的应用效果。

Omnidirectional Antenna Diversity System for High-Speed Onboard Communication

In this article,an omnidirectional dual-polarized antenna with synergetic electromagnetic and aerodynamic properties is propounded for high-speed diversity systems.The propounded antenna comprises a probe-fed cavity for horizontally polarized radiation and a microstrip-fed slot for vertical polarization.Double-layer metasurfaces are properly designed as artificial magnetic conductor boundaries with direct metal-mountable onboard installation and compact sizes.An attached wedge-shaped block is utilized for windage reduction in hydrodynamics.The propounded antenna is fabricated for design verification,and the experimental results agree well with the simulated ones.For vertical polarization,the operating bandwidth is in the range of 2.37–2.55 GHz,and the realized gain variation in the azimuthal radiation pattern is 3.67 decibels(dB).While an impedance bandwidth in the range of 2.45–2.47 GHz and a gain variation of 3.71 dB are also achieved for horizontal polarization.A port isolation more than 33 dB is obtained in a compact volume of 0.247λ_(0)×0.345λ_(0)×0.074λ_(0),whereλ_(0)represents the wavelength in vacuum at the center frequency,wherein the wedge-shaped block is included.The propounded diversity antenna has electromagnetic and aerodynamic merits,and exhibits an excellent potential for high-speed onboard communication.

Tailoring of onboard system software

Tailoring of an operating system and an in embedded real-time operating system in particular is es-sential for both, kernel and operation. But many of current embedded real-time operating systems provide somebasic tailoring at the cost of depleting the flexibility of hardware, which causes the lack of flexibility, and de-grades their tailors. A layered modular tailoring model has been proposed together with some tailoring operationsto improve the flexibility of the systems, and algorithms have been proposed for verification of tailoring opera-tions with the current operating system.

Experimental Study on the Performance of an Onboard Hollow-Fiber-Membrane Air Separation Module

Onboard air separation devices,based on hollow fiber membranes,are traditionally used for the optimization of aircraft fuel tank inerting systems.In the present study,a set of tests have been designed and executed to assess the air separation performances of these systems for different air inlet temperatures(70°C∼110°C),inlet pressures(0.1∼0.4 MPa),volume flow rates of nitrogen-enriched air(NEA)(30∼120 L/min)and flight altitudes(1.5∼18 km).In particular,the temperature,pressure,volume flow rate,and oxygen concentration of air,NEA and oxygen-enriched air(OEA)have been measured.The experimental results show that the oxygen concentration of NEA,air separation coefficient,and nitrogen utilization coefficient decrease with the rising of air inlet temperature,air inlet pressure,and flight altitude.The effect of air inlet pressure on the above three parameters is significant,while the influence of air inlet temperature and flight altitude is relatively small.

Yaogan 14 and Tiantuo Satellites Sent into Orbit onboard LM-4B

At 15:06 on May 10, China successfully sent Yaogan 14 satellite and Tiantuo 1 satellite into space with a Long March 4B rocket from the Taiyuan Satellite Launch Center. It marks another launch of two satellites by one rocket following the launch of two BeiDou (Compass) satellites by one rocket on April 30, and it is also the third consecutive launch mission conducted by CASC within 10 days.

CAS Experiments Onboard Spacecraft Successful

The descent module of China's Shenzhou 3 spacecraft returned to Earth on April 1, 2002, one week after the spacecraft was launched at the Jiuquan Satellite Launching Center in Gansu Province. It was the third test flight of a prototype spacecraft expected to carry taikonauts (stemming from the Chinese words for outer space) into space in the near future since the first launch of the Shenzhou (Divine Vessel) series on November 20,1999.

A simplified approach to the basic principle of security measures onboard ships

There are many reasons whymerchant ships make desirable targetsfor pirates and terrorists as well as aconvenient means of transport for thestowaway. Criminal activity in the form ofsuch threats is quickly becoming one ofthe greatest threats to ships and

Integrated Entry Guidance for Reusable Launch Vehicle

A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertainties are presented to demonstrate the capacity and reliability of this method.

High Precision Orbit Determination of CHAMP Satellite

The precision orbit determination of challenging minisatellite payload(CHAMP) satellite was done based on position and navigation data analyst(PANDA) software which is developed in Wuhan University, using the onboard GPS data of year 2002 from day 126 to 131. The orbit accuracy was assessed by analyzing the difference from GFZ post-processed science orbits (PSO), the GPS carrier and pseudo-range data residuals and the satellite laser ranging (SLR) residuals.

Real-time online rescheduling for multiple agile satellites with emergent tasks

The emergent task is a kind of uncertain event that satellite systems often encounter in the application process.In this paper,the multi-satellite distributed coordinating and scheduling problem considering emergent tasks is studied.Due to the limitation of onboard computational resources and time,common online onboard rescheduling methods for such problems usually adopt simple greedy methods,sacrificing the solution quality to deliver timely solutions.To better solve the problem,a new multi-satellite onboard scheduling and coordinating framework based on multi-solution integration is proposed.This method uses high computational power on the ground and generates multiple solutions,changing the complex onboard rescheduling problem to a solution selection problem.With this method,it is possible that little time is used to generate a solution that is as good as the solutions on the ground.We further propose several multi-satellite coordination methods based on the multi-agent Markov decision process(MMDP)and mixed-integer programming(MIP).These methods enable the satellite to make independent decisions and produce high-quality solutions.Compared with the traditional centralized scheduling method,the proposed distributed method reduces the cost of satellite communication and increases the response speed for emergent tasks.Extensive experiments show that the proposed multi-solution integration framework and the distributed coordinating strategies are efficient and effective for onboard scheduling considering emergent tasks.

Defect detection in freight railcar tapered-roller bearings using vibration techniques

Currently,there are two types of defect detection systems used to monitor the health of freight railcar bearings in service:wayside hot-box detection systems and trackside acoustic detection systems.These systems have proven to be inefficient in accurately determining bearing health,especially in the early stages of defect development.To that end,a prototype onboard bearing condition monitoring system has been developed and validated through extensive laboratory testing and a designated field test in 2015 at the Transportation Technology Center,Inc.in Pueblo,CO.The devised system can accurately and reliably characterize the health of bearings based on developed vibration thresholds and can identify defective taperedroller bearing components with defect areas smaller than 12.9 cm2 while in service.