The advantages of once-through molten salt reactors include readily available fuel,low nuclear proliferation risk,and low technical difficulty.It is potentially the most easily commercialized fuel cycle mode for molte...The advantages of once-through molten salt reactors include readily available fuel,low nuclear proliferation risk,and low technical difficulty.It is potentially the most easily commercialized fuel cycle mode for molten salt reactors.However,there are some problems in the parameter selection of once-through molten salt reactors,and the relevant burnup optimization work requires further analysis.This study examined once-through graphitemoderated molten salt reactor using enriched uranium and thorium.The fuel volume fraction(VF),initial heavy nuclei concentration(HN_(0)),feeding uranium enrichment(E_(FU)),volume of the reactor core,and fuel type were changed to obtain the optimal conditions for burnup.We found an optimal region for VF and HN_(0) in each scheme,and the location and size of the optimal region changed with the degree of E_(FU),core volume,and fuel type.The recommended core schemes provide a reference for the core design of a once-through molten salt reactor.展开更多
The once-through steam generator (OTSG) in concentric annuli tube is a new type of steam generator which applies double side to transfer heat. The heat flux between the water of centric tube, outside annuli tube and t...The once-through steam generator (OTSG) in concentric annuli tube is a new type of steam generator which applies double side to transfer heat. The heat flux between the water of centric tube, outside annuli tube and that of annulus channel is assumed to be equal, and then the steam generator’s model is built by lumped parameters with moving boundary. In the basis of the built model, static and dynamic characteristics are analyzed. The static characteristics are proved by experiment results in a 19-tube once-through steam generator of Babcock & Wilcox. The characteristics that the lengths of three regions (subcooled region, nucleate boiling region, superheat region) change with power can be explained by theory analysis. The dynamic characteristics accord with the heat and hydraulics and the results of analysis according to the mechanism.展开更多
In this paper both processes of landslide and subsidence are considered to be limited systems. Each of these systems in nature might be regarded as an organism. Generally their lifespan must develop with common ecolog...In this paper both processes of landslide and subsidence are considered to be limited systems. Each of these systems in nature might be regarded as an organism. Generally their lifespan must develop with common ecological characteristics, including several evolutional stages, such as initiation, growth, maturation, decline and death. Among these stages, maturation is emphasized so as to find the occurring or thriving date of both systems. An once-through cycle of both landslide and subsidence is established and is accurately predicted by a developed, mathematic model of the Poisson cycle. The Weibull distribution is cited for a landslide example. Both fundamentals are discussed. Stage predictions of landslide and subsidence are performed for several examples. Back analysis of landslides that have already happened are studied with the same model. And when compared with results from the biological mathematic model and with practical results, it is found that they correspond. Stage prediction of subsidences is also researched by the principle of the Poisson cycle.展开更多
A static simulation model of power plant boiler system performance is built up byusing the methods of process system engineering. The primary research is proceeded in thesubsystem models, the decomposition method of s...A static simulation model of power plant boiler system performance is built up byusing the methods of process system engineering. The primary research is proceeded in thesubsystem models, the decomposition method of subsystems and the cutting and convergencestrategy of recycle loops. The corresponding software for simulating the performance of boilersystem is developed. Taking the 670T/h boiler set maed in China in the 100% load pointand the 70% load point are calculated by using our model,the results sre checked with thedata provided by producer. It is further proven that the performance simulation modelhasmore accuracy in application and can meet the reqirements of the unit performance analysisand the prediction of operation behavior.展开更多
A 10MW High Temperature Gas Cooled Reactor (HTR-10) designed by the Institute of Nuclear Energy Technology (INET) is now being constructed. The steam generator (SG) in the HTR-10 is one of the most important component...A 10MW High Temperature Gas Cooled Reactor (HTR-10) designed by the Institute of Nuclear Energy Technology (INET) is now being constructed. The steam generator (SG) in the HTR-10 is one of the most important components for reactor safety. The thermal-hydraulic performance of the SG was investigated. A full scale HTR-10 Steam Generator Two Tube Engineering Model Test Facility (SGTM-10) was installed and tested at INET. This paper describes the SGTM-10 thermal hydraulic experimental system in detail. The SGTM-10 simulates the actual thermal and structural parameters of the HTR-10. The SGTM-10 includes three separated loops: the primary helium loop, the secondary water loop, and the tertiary cooling water loop. Two parallel tubes are arranged in the test assembly. The main experimental equipment is shown in the paper. Expermental results are given illustrating the effects of the outlet pressures, the heating power, and the inlet subcooling.展开更多
基金supported by the Shanghai Sailing Program(No.19YF1457900)Chinese TMSR Strategic Pioneer Science and Technology Project(No.XDA02010000)+1 种基金National Natural Science Foundation of China(No.12005290)Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2020261)。
文摘The advantages of once-through molten salt reactors include readily available fuel,low nuclear proliferation risk,and low technical difficulty.It is potentially the most easily commercialized fuel cycle mode for molten salt reactors.However,there are some problems in the parameter selection of once-through molten salt reactors,and the relevant burnup optimization work requires further analysis.This study examined once-through graphitemoderated molten salt reactor using enriched uranium and thorium.The fuel volume fraction(VF),initial heavy nuclei concentration(HN_(0)),feeding uranium enrichment(E_(FU)),volume of the reactor core,and fuel type were changed to obtain the optimal conditions for burnup.We found an optimal region for VF and HN_(0) in each scheme,and the location and size of the optimal region changed with the degree of E_(FU),core volume,and fuel type.The recommended core schemes provide a reference for the core design of a once-through molten salt reactor.
文摘The once-through steam generator (OTSG) in concentric annuli tube is a new type of steam generator which applies double side to transfer heat. The heat flux between the water of centric tube, outside annuli tube and that of annulus channel is assumed to be equal, and then the steam generator’s model is built by lumped parameters with moving boundary. In the basis of the built model, static and dynamic characteristics are analyzed. The static characteristics are proved by experiment results in a 19-tube once-through steam generator of Babcock & Wilcox. The characteristics that the lengths of three regions (subcooled region, nucleate boiling region, superheat region) change with power can be explained by theory analysis. The dynamic characteristics accord with the heat and hydraulics and the results of analysis according to the mechanism.
基金The paper is one part of a project supported by National Education Committee Funds for Doctoral Faculty
文摘In this paper both processes of landslide and subsidence are considered to be limited systems. Each of these systems in nature might be regarded as an organism. Generally their lifespan must develop with common ecological characteristics, including several evolutional stages, such as initiation, growth, maturation, decline and death. Among these stages, maturation is emphasized so as to find the occurring or thriving date of both systems. An once-through cycle of both landslide and subsidence is established and is accurately predicted by a developed, mathematic model of the Poisson cycle. The Weibull distribution is cited for a landslide example. Both fundamentals are discussed. Stage predictions of landslide and subsidence are performed for several examples. Back analysis of landslides that have already happened are studied with the same model. And when compared with results from the biological mathematic model and with practical results, it is found that they correspond. Stage prediction of subsidences is also researched by the principle of the Poisson cycle.
文摘A static simulation model of power plant boiler system performance is built up byusing the methods of process system engineering. The primary research is proceeded in thesubsystem models, the decomposition method of subsystems and the cutting and convergencestrategy of recycle loops. The corresponding software for simulating the performance of boilersystem is developed. Taking the 670T/h boiler set maed in China in the 100% load pointand the 70% load point are calculated by using our model,the results sre checked with thedata provided by producer. It is further proven that the performance simulation modelhasmore accuracy in application and can meet the reqirements of the unit performance analysisand the prediction of operation behavior.
基金the State High- Tech Developments Plan of China!(No.86 3- 6 14- 0 2
文摘A 10MW High Temperature Gas Cooled Reactor (HTR-10) designed by the Institute of Nuclear Energy Technology (INET) is now being constructed. The steam generator (SG) in the HTR-10 is one of the most important components for reactor safety. The thermal-hydraulic performance of the SG was investigated. A full scale HTR-10 Steam Generator Two Tube Engineering Model Test Facility (SGTM-10) was installed and tested at INET. This paper describes the SGTM-10 thermal hydraulic experimental system in detail. The SGTM-10 simulates the actual thermal and structural parameters of the HTR-10. The SGTM-10 includes three separated loops: the primary helium loop, the secondary water loop, and the tertiary cooling water loop. Two parallel tubes are arranged in the test assembly. The main experimental equipment is shown in the paper. Expermental results are given illustrating the effects of the outlet pressures, the heating power, and the inlet subcooling.
