Quantum dialogue(QD)enables two communication parties to directly exchange secret messages simultaneously.In conventional QD protocols,photons need to transmit in the quantum channel for two rounds.In this paper,we pr...Quantum dialogue(QD)enables two communication parties to directly exchange secret messages simultaneously.In conventional QD protocols,photons need to transmit in the quantum channel for two rounds.In this paper,we propose a one-step QD protocol based on the hyperentanglement.With the help of the non-local hyperentanglement-assisted Bell state measurement(BSM),the photons only need to transmit in the quantum channel once.We prove that our one-step QD protocol is secure in theory and numerically simulate its secret message capacity under practical experimental condition.Compared with previous QD protocols,the one-step QD protocol can effectively simplify the experiment operations and reduce the message loss caused by the photon transmission loss.Meanwhile,the non-local hyperentanglement-assisted BSM has a success probability of 100%and is feasible with linear optical elements.Moreover,combined with the hyperentanglement heralded amplification and purification,our protocol is possible to realize long-distance one-step QD.展开更多
This paper studied the effects of different retarders on the performance of the"one-step"alkali-activated composite cementitious material(ACCM)which is composed of ground granulated blast slag(GGBS)and fly a...This paper studied the effects of different retarders on the performance of the"one-step"alkali-activated composite cementitious material(ACCM)which is composed of ground granulated blast slag(GGBS)and fly ash(FA),and analyzed its mechanical properties,hydration mechanism,and retardation mechanism.The effects of retarders on the hydration products,mechanical properties,and hydration kinetics of ACCM were investigated using XRD,SEM,FTIR,EDS,and thermoactive microcalorimetry.The results showed that Na_(2)B_(4)O_(7)·10H_(2)O(B)delayed the exotherm during the alkali activation process and could effectively delay the setting time of ACCM,but the mechanical properties were slightly decreased.The setting time of ACCM increased with the increase in SG content,but the mechanical properties of ACCM decreased with the increase in SG content.C1_(2)H_(22)O_(11)(CHO)could effectively delay the hydration reaction of ACCM and weakly enhanced the compressive strength.H_(3)PO_(4)(HP)at a concentration of 0.05 mol/L had a certain effect on ACCM retardation,but HP at a concentration of 0.07 and 0.09 mol/L had an effect of promoting the setting and hardening time of ACCM.展开更多
BACKGROUND Biliary stone disease is a highly prevalent condition and a leading cause of hospitalization worldwide.Hepatolithiasis with associated strictures has high residual and recurrence rates after traditional mul...BACKGROUND Biliary stone disease is a highly prevalent condition and a leading cause of hospitalization worldwide.Hepatolithiasis with associated strictures has high residual and recurrence rates after traditional multisession percutaneous transhepatic cholangioscopic lithotripsy(PTCSL).AIM To study one-step PTCSL using the percutaneous transhepatic one-step biliary fistulation(PTOBF)technique guided by three-dimensional(3D)visualization.METHODS This was a retrospective,single-center study analyzing,140 patients who,between October 2016 and October 2023,underwent one-step PTCSL for hepatolithiasis.The patients were divided into two groups:The 3D-PTOBF group and the PTOBF group.Stone clearance on choledochoscopy,complications,and long-term clearance and recurrence rates were assessed.RESULTS Age,total bilirubin,direct bilirubin,Child-Pugh class,and stone location were similar between the 2 groups,but there was a significant difference in bile duct strictures,with biliary strictures more common in the 3D-PTOBF group(P=0.001).The median follow-up time was 55.0(55.0,512.0)days.The immediate stone clearance ratio(88.6%vs 27.1%,P=0.000)and stricture resolution ratio(97.1%vs 78.6%,P=0.001)in the 3D-PTOBF group were significantly greater than those in the PTOBF group.Postoperative complication(8.6%vs 41.4%,P=0.000)and stone recurrence rates(7.1%vs 38.6%,P=0.000)were significantly lower in the 3D-PTOBF group.CONCLUSION Three-dimensional visualization helps make one-step PTCSL a safe,effective,and promising treatment for patients with complicated primary hepatolithiasis.The perioperative and long-term outcomes are satisfactory for patients with complicated primary hepatolithiasis.This minimally invasive method has the potential to be used as a substitute for hepatobiliary surgery.展开更多
In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction m...In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.展开更多
[Objective] The aim of the research was to study the effect of the ice bath time after heat shock and the incubation time on the transformation efficacy,and to establish a simple and quick transformation method.[Metho...[Objective] The aim of the research was to study the effect of the ice bath time after heat shock and the incubation time on the transformation efficacy,and to establish a simple and quick transformation method.[Method]Competent cells were prepared with two buffer solutions;with the ice bath time after heat shock and the recovery time as the variables,the relationship between these two factors and transformation efficacy was studied.[Result]The transformation efficacy was the best when the ice bath time was 2 min and the recovery time was 30 or 40 min;when the ice bath time and the recovery time was 0 min,a certain amount of transformants still could be obtained.[Conclusion]The ice bath time after heat shock and the recovery time had certain impact on transformation efficacy,but they were not the decisive factors.Therefore,in the general transformation experiment,these two steps could be omitted.展开更多
A mathematical formulation is developed to represent the magneticfield intensity, the current density, the velocity field, the temperature field in the DC arc furnace bath.The governing equations are solved numericall...A mathematical formulation is developed to represent the magneticfield intensity, the current density, the velocity field, the temperature field in the DC arc furnace bath.The governing equations are solved numerically to describe the magnetic field intensity profiles, the current density profiles, Lorentz force profiles, streamline profiles, the velocity profiles and temperature profiles in the 30t DC-EAF bath. The theoretical predictions of temperature field are in good agreement with measurement in the 30t DC-EAF bath, and the recirculation rate of flow is also in good agreement with published estimation.展开更多
Vibrio vulnificus can cause rotten-skin disease in marine fish aquaculture, resulting in a large number of deaths. The occurrence of rotten-skin disease is becoming severer and severer, leading to serious economic los...Vibrio vulnificus can cause rotten-skin disease in marine fish aquaculture, resulting in a large number of deaths. The occurrence of rotten-skin disease is becoming severer and severer, leading to serious economic losses. In this study, the sensitivities of V. vulnificus to the 18 kinds of herbs, such as stone calamus and Chinese rhubarb, were determined using the agar diffusion method （susceptibility paper）. The results showed that Chinese gall, dark plum, sea buckthorn and eucalyptus leaves have bacteriostatic and bactericidal effects, while sappan wood, Chi- nese rhubarb, pomegranate bark, mentha and clove have strong bacteriostatic ef- fects. The Chinese medicinal herb bath showed good control effect on V. vulnificus.展开更多
Objective To investigate the effects of short-term forest bathing on human health. Methods Twenty healthy male university students participated as subjects and were randomly divided into two groups of 10. One group wa...Objective To investigate the effects of short-term forest bathing on human health. Methods Twenty healthy male university students participated as subjects and were randomly divided into two groups of 10. One group was sent on a two-night trip to a broad-leaved evergreen forest, and the other was sent to a city area. Serum cytokine levels reflecting inflammatory and stress response, indicators reflecting oxidative stress, the distribution of leukocyte subsets, and plasma endothelin-1 （ET-1） concentrations were measured before and after the experiment to evaluate the positive health effects of forest environments. A profile of mood states （POMS） evaluation was used to assess changes in mood states. Results No significant differences in the baseline values of the indicators were observed between the two groups before the experiment. Subjects exposed to the forest environment showed reduced oxidative stress and pro-inflammatory level, as evidenced by decreased malondialdehyde, interleukin-6, and tumor necrosis factor a levels compared with the urban group. Serum cortisol levels were also lower than in the urban group. Notably, the concentration of plasma ET-1 was much lower in subjects exposed to the forest environment. The POMS evaluation showed that after exposure to the forest environment, subjects had lower scores in the negative subscales, and the score for vigor was increased. Conclusion Forest bathing is beneficial to human health, perhaps through preventive effects related to several pathological factors.展开更多
A mathematical model was developed to describe the interaction of multiple physical fields in a slag bath during electroslag remelting （ESR） process with a current-conductive mould. The distributions of current dens...A mathematical model was developed to describe the interaction of multiple physical fields in a slag bath during electroslag remelting （ESR） process with a current-conductive mould. The distributions of current density, magnetic induction intensity, electromagnetic force, Joule heating, fluid flow and temperature were simulated. The model was verified by temperature measurements during remelting 12CrMoVG steel with a slag of 50wt%-70wt% CaF2, 20wt%-30wt% CaO, 10wt%-20wt% A1203, and 〈10wt% SiO2 in a 600 mm diameter current-conductive mould. There is a good agreement between the calculated temperature results and the measured data in the slag bath. The calculated results show that the maximum values of current density, electromagnetic force and Joule heating are in the region between the comer electrodes and the conductivity element. The characteristics of current density distribution, magnetic induction intensity, electromagnetic force, Joule heating, velocity patterns and temperature profiles in the slag bath during ESR process with current-conductive mould were analyzed.展开更多
A mathematical model describing the flow field, heat transfer and the electromagnetic phenomenon in a DC electric arc furnace has been developed. First the governing equations in the arc plasma region are solved and t...A mathematical model describing the flow field, heat transfer and the electromagnetic phenomenon in a DC electric arc furnace has been developed. First the governing equations in the arc plasma region are solved and the calculated results of heat transfer, current density and shear stresses on the anode surface are used as boundary conditions in a model of molten bath. Then a two-dimensional time-dependent model is used to describe the flow field and electromagnetic phenomenon in the molten bath. Moreover, the effect of bottom electrode diameter on the circulation of molten bath is studied.展开更多
In this article, the growth process of chemical bath deposited CdS films was systematically investigated. The structural, optical, and morphological properties were investigated by X-ray diffraction （XRD）, transmiss...In this article, the growth process of chemical bath deposited CdS films was systematically investigated. The structural, optical, and morphological properties were investigated by X-ray diffraction （XRD）, transmission electron microscope （TEM）, UV-Vis spectrophotometer, scanning electron microscope （SEM）, respectively. CdS nanocubes with size of less than 500 nm and nanocrystal-lites with diameter of less than 5 nm forming in reaction solution are observed. According to the TEM results and the SEM morphological evolution of CdS films, a crystal-lite-by-crystallite growth mechanism is proposed to eluci-date the growth process of chemical bath deposited CdS films based on the present growth mechanism.展开更多
A catalyst consisting of platinum nanoparticles on a ZIF-8 support（Pt@ZIF-8） was synthesized in a straightforward one-step procedure,by adding a nanostructured platinum sol during the formation of ZIF-8 at room temp...A catalyst consisting of platinum nanoparticles on a ZIF-8 support（Pt@ZIF-8） was synthesized in a straightforward one-step procedure,by adding a nanostructured platinum sol during the formation of ZIF-8 at room temperature.Pt@ZIF-8 was highly porous and well crystallized.The Pt nanoparticles were well dispersed within the ZIF-8 support.In the hydrogenation of 1,4-butynediol,Pt@ZIF-8 exhibited high activity,excellent selectivity for 1,4-butenediol of greater than 94%,and reusability.The Pt@ZIF-8 catalyst did not require further additives.The favorable catalytic performance was attributed primarily to the modification of the ZIF-8 support by the platinum nanoparticles.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12175106 and 92365110).
文摘Quantum dialogue(QD)enables two communication parties to directly exchange secret messages simultaneously.In conventional QD protocols,photons need to transmit in the quantum channel for two rounds.In this paper,we propose a one-step QD protocol based on the hyperentanglement.With the help of the non-local hyperentanglement-assisted Bell state measurement(BSM),the photons only need to transmit in the quantum channel once.We prove that our one-step QD protocol is secure in theory and numerically simulate its secret message capacity under practical experimental condition.Compared with previous QD protocols,the one-step QD protocol can effectively simplify the experiment operations and reduce the message loss caused by the photon transmission loss.Meanwhile,the non-local hyperentanglement-assisted BSM has a success probability of 100%and is feasible with linear optical elements.Moreover,combined with the hyperentanglement heralded amplification and purification,our protocol is possible to realize long-distance one-step QD.
基金Funded by Key Laboratory for Comprehensive Energy Saving of Cold Regions Architecture of Ministry of Education(No.JLJZHDKF202204)。
文摘This paper studied the effects of different retarders on the performance of the"one-step"alkali-activated composite cementitious material(ACCM)which is composed of ground granulated blast slag(GGBS)and fly ash(FA),and analyzed its mechanical properties,hydration mechanism,and retardation mechanism.The effects of retarders on the hydration products,mechanical properties,and hydration kinetics of ACCM were investigated using XRD,SEM,FTIR,EDS,and thermoactive microcalorimetry.The results showed that Na_(2)B_(4)O_(7)·10H_(2)O(B)delayed the exotherm during the alkali activation process and could effectively delay the setting time of ACCM,but the mechanical properties were slightly decreased.The setting time of ACCM increased with the increase in SG content,but the mechanical properties of ACCM decreased with the increase in SG content.C1_(2)H_(22)O_(11)(CHO)could effectively delay the hydration reaction of ACCM and weakly enhanced the compressive strength.H_(3)PO_(4)(HP)at a concentration of 0.05 mol/L had a certain effect on ACCM retardation,but HP at a concentration of 0.07 and 0.09 mol/L had an effect of promoting the setting and hardening time of ACCM.
基金Supported by The Key Medical Specialty Nurturing Program of Foshan During The 14th Five-Year Plan Period,No.FSPY145205The Medical Research Project of Foshan Health Bureau,No.20230814A010024+1 种基金The Guangzhou Science and Technology Plan Project,No.202102010251the Guangdong Science and Technology Program,No.2017ZC0222.
文摘BACKGROUND Biliary stone disease is a highly prevalent condition and a leading cause of hospitalization worldwide.Hepatolithiasis with associated strictures has high residual and recurrence rates after traditional multisession percutaneous transhepatic cholangioscopic lithotripsy(PTCSL).AIM To study one-step PTCSL using the percutaneous transhepatic one-step biliary fistulation(PTOBF)technique guided by three-dimensional(3D)visualization.METHODS This was a retrospective,single-center study analyzing,140 patients who,between October 2016 and October 2023,underwent one-step PTCSL for hepatolithiasis.The patients were divided into two groups:The 3D-PTOBF group and the PTOBF group.Stone clearance on choledochoscopy,complications,and long-term clearance and recurrence rates were assessed.RESULTS Age,total bilirubin,direct bilirubin,Child-Pugh class,and stone location were similar between the 2 groups,but there was a significant difference in bile duct strictures,with biliary strictures more common in the 3D-PTOBF group(P=0.001).The median follow-up time was 55.0(55.0,512.0)days.The immediate stone clearance ratio(88.6%vs 27.1%,P=0.000)and stricture resolution ratio(97.1%vs 78.6%,P=0.001)in the 3D-PTOBF group were significantly greater than those in the PTOBF group.Postoperative complication(8.6%vs 41.4%,P=0.000)and stone recurrence rates(7.1%vs 38.6%,P=0.000)were significantly lower in the 3D-PTOBF group.CONCLUSION Three-dimensional visualization helps make one-step PTCSL a safe,effective,and promising treatment for patients with complicated primary hepatolithiasis.The perioperative and long-term outcomes are satisfactory for patients with complicated primary hepatolithiasis.This minimally invasive method has the potential to be used as a substitute for hepatobiliary surgery.
基金supported by the Qingdao Postdoctoral Program Funding(QDBSH20220202045)Shandong provincial Natural Science Foundation(ZR2021ME049,ZR2022ME176)+1 种基金National Natural Science Foundation of China(22078176)Taishan Industrial Experts Program(TSCX202306135).
文摘In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.
基金Supported by Foundation for Returned Scholars of Hebei Province(2010)Research Fund for the Doctoral Program of Hebei Normal University(L2009B13)~~
文摘[Objective] The aim of the research was to study the effect of the ice bath time after heat shock and the incubation time on the transformation efficacy,and to establish a simple and quick transformation method.[Method]Competent cells were prepared with two buffer solutions;with the ice bath time after heat shock and the recovery time as the variables,the relationship between these two factors and transformation efficacy was studied.[Result]The transformation efficacy was the best when the ice bath time was 2 min and the recovery time was 30 or 40 min;when the ice bath time and the recovery time was 0 min,a certain amount of transformants still could be obtained.[Conclusion]The ice bath time after heat shock and the recovery time had certain impact on transformation efficacy,but they were not the decisive factors.Therefore,in the general transformation experiment,these two steps could be omitted.
文摘A mathematical formulation is developed to represent the magneticfield intensity, the current density, the velocity field, the temperature field in the DC arc furnace bath.The governing equations are solved numerically to describe the magnetic field intensity profiles, the current density profiles, Lorentz force profiles, streamline profiles, the velocity profiles and temperature profiles in the 30t DC-EAF bath. The theoretical predictions of temperature field are in good agreement with measurement in the 30t DC-EAF bath, and the recirculation rate of flow is also in good agreement with published estimation.
基金Supported by Incentive Program Subsidized by Department of Science and Technology of Hebei Province(15926620H)Key Technology Research and Development Program of Science and Technology Bureau of Qinhuangdao City(201401A067,201402B043)~~
文摘Vibrio vulnificus can cause rotten-skin disease in marine fish aquaculture, resulting in a large number of deaths. The occurrence of rotten-skin disease is becoming severer and severer, leading to serious economic losses. In this study, the sensitivities of V. vulnificus to the 18 kinds of herbs, such as stone calamus and Chinese rhubarb, were determined using the agar diffusion method （susceptibility paper）. The results showed that Chinese gall, dark plum, sea buckthorn and eucalyptus leaves have bacteriostatic and bactericidal effects, while sappan wood, Chi- nese rhubarb, pomegranate bark, mentha and clove have strong bacteriostatic ef- fects. The Chinese medicinal herb bath showed good control effect on V. vulnificus.
基金supported by the project "Modern forestry-exploitation and utilization of therapeutic forest" commissioned by the Forestry Department of Zhejiang Provincefunds from the Ministry of Health of P.R.China (WKJ2011-2-014)+1 种基金the Science and Technology Department of Zhejiang Province Program (2008C33046)Zhejiang Provincial key disciplinary fields of Geriatrics Program (2007ZB006 and 2008ZJ004)
文摘Objective To investigate the effects of short-term forest bathing on human health. Methods Twenty healthy male university students participated as subjects and were randomly divided into two groups of 10. One group was sent on a two-night trip to a broad-leaved evergreen forest, and the other was sent to a city area. Serum cytokine levels reflecting inflammatory and stress response, indicators reflecting oxidative stress, the distribution of leukocyte subsets, and plasma endothelin-1 （ET-1） concentrations were measured before and after the experiment to evaluate the positive health effects of forest environments. A profile of mood states （POMS） evaluation was used to assess changes in mood states. Results No significant differences in the baseline values of the indicators were observed between the two groups before the experiment. Subjects exposed to the forest environment showed reduced oxidative stress and pro-inflammatory level, as evidenced by decreased malondialdehyde, interleukin-6, and tumor necrosis factor a levels compared with the urban group. Serum cortisol levels were also lower than in the urban group. Notably, the concentration of plasma ET-1 was much lower in subjects exposed to the forest environment. The POMS evaluation showed that after exposure to the forest environment, subjects had lower scores in the negative subscales, and the score for vigor was increased. Conclusion Forest bathing is beneficial to human health, perhaps through preventive effects related to several pathological factors.
基金supported by China Postdoctoral Science Foundation (No.20100471452)
文摘A mathematical model was developed to describe the interaction of multiple physical fields in a slag bath during electroslag remelting （ESR） process with a current-conductive mould. The distributions of current density, magnetic induction intensity, electromagnetic force, Joule heating, fluid flow and temperature were simulated. The model was verified by temperature measurements during remelting 12CrMoVG steel with a slag of 50wt%-70wt% CaF2, 20wt%-30wt% CaO, 10wt%-20wt% A1203, and 〈10wt% SiO2 in a 600 mm diameter current-conductive mould. There is a good agreement between the calculated temperature results and the measured data in the slag bath. The calculated results show that the maximum values of current density, electromagnetic force and Joule heating are in the region between the comer electrodes and the conductivity element. The characteristics of current density distribution, magnetic induction intensity, electromagnetic force, Joule heating, velocity patterns and temperature profiles in the slag bath during ESR process with current-conductive mould were analyzed.
文摘A mathematical model describing the flow field, heat transfer and the electromagnetic phenomenon in a DC electric arc furnace has been developed. First the governing equations in the arc plasma region are solved and the calculated results of heat transfer, current density and shear stresses on the anode surface are used as boundary conditions in a model of molten bath. Then a two-dimensional time-dependent model is used to describe the flow field and electromagnetic phenomenon in the molten bath. Moreover, the effect of bottom electrode diameter on the circulation of molten bath is studied.
基金financially supported by the National Natural Science Foundation of China(No.21101151)the Innovative Talent Program of Institute of Electrical Engineering(No.O940171C41)
文摘In this article, the growth process of chemical bath deposited CdS films was systematically investigated. The structural, optical, and morphological properties were investigated by X-ray diffraction （XRD）, transmission electron microscope （TEM）, UV-Vis spectrophotometer, scanning electron microscope （SEM）, respectively. CdS nanocubes with size of less than 500 nm and nanocrystal-lites with diameter of less than 5 nm forming in reaction solution are observed. According to the TEM results and the SEM morphological evolution of CdS films, a crystal-lite-by-crystallite growth mechanism is proposed to eluci-date the growth process of chemical bath deposited CdS films based on the present growth mechanism.
基金supported by the National Natural Science Foundation of China(21573031 and 21428301)the Fundamental Research Funds for the Central Universities(DUT15ZD106 and DUT15RC(4)09)~~
文摘A catalyst consisting of platinum nanoparticles on a ZIF-8 support（Pt@ZIF-8） was synthesized in a straightforward one-step procedure,by adding a nanostructured platinum sol during the formation of ZIF-8 at room temperature.Pt@ZIF-8 was highly porous and well crystallized.The Pt nanoparticles were well dispersed within the ZIF-8 support.In the hydrogenation of 1,4-butynediol,Pt@ZIF-8 exhibited high activity,excellent selectivity for 1,4-butenediol of greater than 94%,and reusability.The Pt@ZIF-8 catalyst did not require further additives.The favorable catalytic performance was attributed primarily to the modification of the ZIF-8 support by the platinum nanoparticles.
