One-step quantum dialogue

Quantum dialogue(QD)enables two communication parties to directly exchange secret messages simultaneously.In conventional QD protocols,photons need to transmit in the quantum channel for two rounds.In this paper,we propose a one-step QD protocol based on the hyperentanglement.With the help of the non-local hyperentanglement-assisted Bell state measurement(BSM),the photons only need to transmit in the quantum channel once.We prove that our one-step QD protocol is secure in theory and numerically simulate its secret message capacity under practical experimental condition.Compared with previous QD protocols,the one-step QD protocol can effectively simplify the experiment operations and reduce the message loss caused by the photon transmission loss.Meanwhile,the non-local hyperentanglement-assisted BSM has a success probability of 100%and is feasible with linear optical elements.Moreover,combined with the hyperentanglement heralded amplification and purification,our protocol is possible to realize long-distance one-step QD.

Effect of the Retarder on Initial Hydration and Mechanical Properties of the"one-step"Alkaliactivated Composite Cementitious Materials

This paper studied the effects of different retarders on the performance of the"one-step"alkali-activated composite cementitious material(ACCM)which is composed of ground granulated blast slag(GGBS)and fly ash(FA),and analyzed its mechanical properties,hydration mechanism,and retardation mechanism.The effects of retarders on the hydration products,mechanical properties,and hydration kinetics of ACCM were investigated using XRD,SEM,FTIR,EDS,and thermoactive microcalorimetry.The results showed that Na_(2)B_(4)O_(7)·10H_(2)O(B)delayed the exotherm during the alkali activation process and could effectively delay the setting time of ACCM,but the mechanical properties were slightly decreased.The setting time of ACCM increased with the increase in SG content,but the mechanical properties of ACCM decreased with the increase in SG content.C1_(2)H_(22)O_(11)(CHO)could effectively delay the hydration reaction of ACCM and weakly enhanced the compressive strength.H_(3)PO_(4)(HP)at a concentration of 0.05 mol/L had a certain effect on ACCM retardation,but HP at a concentration of 0.07 and 0.09 mol/L had an effect of promoting the setting and hardening time of ACCM.

Three-dimensional visualization technology for guiding one-step percutaneous transhepatic cholangioscopic lithotripsy for the treatment of complex hepatolithiasis

BACKGROUND Biliary stone disease is a highly prevalent condition and a leading cause of hospitalization worldwide.Hepatolithiasis with associated strictures has high residual and recurrence rates after traditional multisession percutaneous transhepatic cholangioscopic lithotripsy(PTCSL).AIM To study one-step PTCSL using the percutaneous transhepatic one-step biliary fistulation(PTOBF)technique guided by three-dimensional(3D)visualization.METHODS This was a retrospective,single-center study analyzing,140 patients who,between October 2016 and October 2023,underwent one-step PTCSL for hepatolithiasis.The patients were divided into two groups:The 3D-PTOBF group and the PTOBF group.Stone clearance on choledochoscopy,complications,and long-term clearance and recurrence rates were assessed.RESULTS Age,total bilirubin,direct bilirubin,Child-Pugh class,and stone location were similar between the 2 groups,but there was a significant difference in bile duct strictures,with biliary strictures more common in the 3D-PTOBF group(P=0.001).The median follow-up time was 55.0(55.0,512.0)days.The immediate stone clearance ratio(88.6%vs 27.1%,P=0.000)and stricture resolution ratio(97.1%vs 78.6%,P=0.001)in the 3D-PTOBF group were significantly greater than those in the PTOBF group.Postoperative complication(8.6%vs 41.4%,P=0.000)and stone recurrence rates(7.1%vs 38.6%,P=0.000)were significantly lower in the 3D-PTOBF group.CONCLUSION Three-dimensional visualization helps make one-step PTCSL a safe,effective,and promising treatment for patients with complicated primary hepatolithiasis.The perioperative and long-term outcomes are satisfactory for patients with complicated primary hepatolithiasis.This minimally invasive method has the potential to be used as a substitute for hepatobiliary surgery.

Study of the reaction mechanism for preparing powdered activated coke with SO_(2)adsorption capability via one-step rapid activation method under flue gas atmosphere

In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.

Developing super-hydrophobic and corrosion-resistant coating on magnesium-lithium alloy via one-step hydrothermal processing

Formation of super-hydrophobic and corrosion-resistant coatings can provide significant corrosion protection to magnesium alloys.However,it remains a grand challenge to produce such coatings for magnesium-lithium alloys due to their high chemical reactivity.Herein,a one-step hydrothermal processing was developed using a stearic-acid-based precursor medium,which enables the hydrothermal conversion and the formation of low surface energy materials concurrently to produce the super-hydrophobic and corrosion-resistant coating.The multiscale microstructures with nanoscale stacks and microscale spheres on the surface,as well as the through-thickness stearates,lead to the super-hydrophobicity and excellent corrosion resistance of the obtained coating.

One-step green method to prepare progressive burning gun propellant through gradient denitration strategy

Gradiently denitrated gun propellant(GDGP)prepared by a“gradient denitration”strategy is obviously superior in progressive burning performance to the traditional deterred gun propellant.Currently,the preparation of GDGP employed a tedious two-step method involving organic solvents,which hinders the large-scale preparation of GDGP.In this paper,GDGP was successfully prepared via a novelty and environmentally friendly one-step method.The obtained samples were characterized by FT-IR,Raman,SEM and XPS.The results showed that the content of nitrate groups gradiently increased from the surface to the core in the surface layer of GDGP and the surface layer of GDGP exhibited a higher compaction than that of raw gun propellant,with a well-preserved nitrocellulose structure.The denitration process enabled the propellant surface with regressive energy density and good progressive burning performance,as confirmed by oxygen bomb and closed bomb test.At the same time,the effects of different solvents on the component loss of propellant were compared.The result showed that water caused the least component loss.Finally,the stability of GDGP was confirmed by methyl-violet test.This work not only provided environmentally friendly,simple and economic preparation of GDGP,but also confirmed the stability of GDGP prepared by this method.

One-step ethylene separation from ternary C_(2) hydrocarbon mixture with a robust zirconium metal-organic framework

One-step separation of high-purity ethylene(C_(2)H_(4))from C_(2) hydrocarbon mixture is critical but challenging because of the very similar molecular sizes and physical properties of C_(2)H_(4),ethane(C_(2)H_(6)),and acetylene(C_(2)H_(2)).Herein,we report a robust zirconium metal-organic framework(MOF)Zr-TCA(H3TCA=4,4',4"-tricarboxytriphenylamine)with suitable pore size(0.6 nm×0.7 nm)and pore environment for direct C_(2)H_(4) purification from C_(2)H_(4)/C_(2)H_(2)/C_(2)H_(6) gas-mixture.Computational studies indicate that the abundant oxygen atoms and non-polar phenyl rings created favorable pore environments for the preferential binding of C_(2)H_(2) and C_(2)H_(6) over C_(2)H_(4).As a result,Zr-TCA exhibits not only high C_(2)H_(6)(2.28 mmol·g^(-1))and C_(2)H_(2)(2.78 mmol·g^(-1))adsorption capacity but also excellent C_(2)H_(6)/C_(2)H_(4)(2.72)and C_(2)H_(2)/C_(2)H_(4)(5.64)selectivity,surpassing most of one-step C_(2)H_(4) purification MOF materials.Dynamic breakthrough experiments confirm that Zr-TCA can produce high-purity C_(2)H_(4)(>99.9%)from a ternary gas mixture(1/9/90 C_(2)H_(2)/C_(2)H_(6)/C_(2)H_(4))in a single step with a high C_(2)H_(4) productivity of 5.61 L·kg^(-1).

One-step Eco-friendly Fabrication of Antibacterial Polyester Via On-line Amination Reaction by Melt Coextrusion

The work is dedicated to develop a one-step eco-friendly method to prepare antibacterial polyethylene terephthalate(PET).We report a one-step eco-friendly method to manufacture antibacterial PET via on-line amination reaction by melt coextrusion.Beside evenly mixing of poly(hexamethylene guanidine)(PHMG)and PET in the melt coextrusion procedure,the amination reaction also occurred between PHMG and PET under high temperature(230-270℃).The antibacterial ability of composite PET showed obvious PHMG concentration dependence,and antibacterial activity reached more than 99%when PHMG content was 2.5 wt%.Moreover,LIVE/DEAD fluorescence test further confirmed that the composite PET could kill bacteria quickly and efiectively(within 30 min);while negligible cytotoxicity was observed to HSF and HUVEC cells.Onestep eco-friendly fabrication of composite antibacterial PET was accomplished by on-line melt coextrusion.The composite antibacterial PET has potential use in multiple fields to combat with pathogenic including textiles,packaging materials,decoration materials and biomedical devices,etc.

Establishment and Preliminary Application of One-step Reverse Transcriptase Droplet Digital PCR Assay for Bovine Viral Diarrhea Virus

[Objective]The paper was to establish a one-step reverse transcriptase droplet digital PCR(RT-ddPCR)assay for bovine viral diarrhea virus(BVDV).[Method]Based on one-step real-time quantitative PCR(RT-qPCR)assay,BVDV-specific primers and probes were designed in this study.The reverse transcriptase,annealing temperature,primer and probe concentrations and reaction conditions of RT-ddPCR assay were optimized.Meantime,the specificity,sensitivity and repeatability of RT-ddPCR assay were evaluated.[Result]The optimal reverse transcription system for the established RT-ddPCR assay was as follows:commercial one-step reverse transcriptase droplet digital PCR kit with matching reagents,a final primer concentration of 900 nmol/L,a final probe concentration of 250 nmol/L and an optimal annealing temperature of 57℃.The results were negative when the method was used to detect other common epidemic viruses;the minimum detection limit was 3.2 copies/μL with good repeatability,and the coefficient of variation was less than 5%.RT-ddPCR and RT-qPCR assays were used to test 24 bovine swab samples and the test results showed that the established RT-ddPCR assay was superior to RT-qPCR assay.[Conclusion]The RT-ddPCR assay established in this study has strong specificity,high sensitivity and good repeatability,and is suitable for nucleic acid detection of clinical samples.This study provided a technical support for early detection and quantitative diagnosis of BVDV infection.

Non-exposed endoscopic wall-inversion surgery with one-step nucleic acid amplification for early gastrointestinal tumors:Personal experience and literature review

BACKGROUND Laparoscopic and endoscopic cooperative surgery is a safe,organ-sparing surgery that achieves full-thickness resection with adequate margins.Recent studies have demonstrated the safety and efficacy of these procedures.However,these techniques are limited by the exposure of the tumor and mucosa to the peritoneal cavity,which could lead to viable cancer cell seeding and the spillage of gastric juice or enteric liquids into the peritoneal cavity.Non-exposed endoscopic wallinversion surgery(NEWS)is highly accurate in determining the resection margins to prevent intraperitoneal contamination because the tumor is inverted into the visceral lumen instead of the peritoneal cavity.Accurate intraoperative assessment of the nodal status could allow stratification of the extent of resection.One-step nucleic acid amplification(OSNA)can provide a rapid method of evaluating nodal tissue,whilst nearinfrared laparoscopy together with indocyanine green can identify relevant nodal tissue intraoperatively.AIM To determine the safety and feasibility of NEWS in early gastric and colon cancers and of adding rapid intraoperative lymph node(LN)assessment with OSNA.METHODS The patient-based experiential portion of our investigations was conducted at the General and Oncological Surgery Unit of the St.Giuseppe Moscati Hospital(Avellino,Italy).Patients with early-stage gastric or colon cancer(diagnosed via endoscopy,endoscopic ultrasound,and computed tomography)were included.All lesions were treated by NEWS procedure with intraoperative OSNA assay between January 2022 and October 2022.LNs were examined intraoperatively with OSNA and postoperatively with conventional histology.We analyzed patient demographics,lesion features,histopathological diagnoses,R0 resection(negative margins)status,adverse events,and follow-up results.Data were collected prospectively and analyzed retrospectively.RESULTS A total of 10 patients(5 males and 5 females)with an average age of 70.4±4.5 years(range:62-78 years)were enrolled in this study.Five patients were diagnosed with gastric cancer.The remaining 5 patients were diagnosed with early-stage colon cancer.The mean tumor diameter was 23.8±11.6 mm(range:15-36 mm).The NEWS procedure was successful in all cases.The mean procedure time was 111.5±10.7 min(range:80-145 min).The OSNA assay revealed no LN metastases in any patients.Histologically complete resection(R0)was achieved in 9 patients(90.0%).There was no recurrence during the follow-up period.CONCLUSION NEWS combined with sentinel LN biopsy and OSNA assay is an effective and safe technique for the removal of selected early gastric and colon cancers in which it is not possible to adopt conventional endoscopic resection techniques.This procedure allows clinicians to acquire additional information on the LN status intraoperatively.

Direct Ethylene Purification from Cracking Gas via a Metal–Organic Framework Through Pore Geometry Fitting

The direct one-step separation of polymer-grade C_(2)H_(4) from complex light hydrocarbon mixtures has high industrial significance but is very challenging.Herein,an ethylene-adsorption-weakening strategy is applied for precise regulation of the pore geometry of four tailor-made metal–organic frameworks(MOFs)with pillar-layered structures,dubbed TYUT-10/11/12/13.Based on its pore geometry design and functional group regulation,TYUT-12 exhibits exceptional selective adsorption selectivity toward C_(3)H_(8),C_(3)H_(6),C_(2)H_(6),C_(2)H_(2),and CO_(2) over C_(2)H_(4);its C_(2)H_(6)/C_(2)H_(4) adsorption selectivity reaches 4.56,surpassing the record value of 4.4 by Fe_(2)(O_(2))(dobdc)(dobdc^(4-)=2,5-dioxido-1,4-benzenedicarboxylate).The weak p–p stacking binding affinity toward C_(2)H_(4) in TYUT-12 is clearly demonstrated through a combination of neutron powder diffraction measurements and theoretical calculations.Breakthrough experiments demonstrate that C_(2)H_(4) can be directly obtained from binary,ternary,quaternary,and six-component light hydrocarbon mixtures with over 99.95%purity.

One-step synthesis of Pt@ZIF-8 catalyst for the selective hydrogenation of 1,4-butynediol to 1,4-butenediol

A catalyst consisting of platinum nanoparticles on a ZIF-8 support（Pt@ZIF-8） was synthesized in a straightforward one-step procedure,by adding a nanostructured platinum sol during the formation of ZIF-8 at room temperature.Pt@ZIF-8 was highly porous and well crystallized.The Pt nanoparticles were well dispersed within the ZIF-8 support.In the hydrogenation of 1,4-butynediol,Pt@ZIF-8 exhibited high activity,excellent selectivity for 1,4-butenediol of greater than 94%,and reusability.The Pt@ZIF-8 catalyst did not require further additives.The favorable catalytic performance was attributed primarily to the modification of the ZIF-8 support by the platinum nanoparticles.

One-step laparoscopic pancreatic necrosectomy verse surgical step-up approach for infected pancreatic necrosis:a case-control study

BACKGROUND:The surgical step-up approach often requires multiple debridements and might not be suitable for infected pancreatic necrosis(IPN)patients with various abscesses or no safe route for percutaneous catheter drainage(PCD).This case-control study aimed to investigate the safety and effectiveness of one-step laparoscopic pancreatic necrosectomy(LPN)in treating IPN.METHODS:This case-control study included IPN patients undergoing one-step LPN or surgical step-up in our center from January 2015 to December 2020.The short-term and long-term complications after surgery,length of hospital stay,and postoperative ICU stays in both groups were analyzed.Univariate and multivariate logistic regression analyses were performed to explore the risk factors of major complications or death.RESULTS:A total of 53 IPN patients underwent one-step LPN and 37 IPN patients underwent surgical step-up approach in this study.There was no significant difference in the incidence of death,major complications,new-onset diabetes,or new-onset pancreatic exocrine insufficiency between the two groups.However,the length of hospital stay in the one-step LPN group was significantly shorter than that in the surgical step-up group.Univariate regression analysis showed that the surgical approach(one-step/step-up)was not the risk factor for major complications or death.Multivariate logistic regression analysis indicated that computed tomography(CT)severity index,American Society of Anesthesiologists(ASA)class IV,and white blood cell(WBC)were the significant risk factors for major complications or death.CONCLUSION:One-step LPN is as safe and effective as the surgical step-up approach for treating IPN patients,and reduces total hospital stay.

Noether＇s theorem and one-step corrections method for holonomic system

In this paper, a new computational method for improving the accuracy of numerically computed solutions is introduced. The computational method is based on the one-step method and conserved quantities of holonomic systems are considered as kinematical constraints in this method.

One-step wet-spinning assembly of twisting-structured graphene/carbon nanotube fiber supercapacitor

Graphene fiber-based supercapacitors hold great promise as flexible energy-storage devices. However, simultaneously achieving high ion-transport ability in electrode and electrolyte layer, which is crucial for realizing the high electrochemical performance, still remains challenging. Here, a facile and effective strategy to solve the problem was proposed by developing a twisting-structured graphene/carbon nanotube(CNT) fiber supercapacitor via one-step wet-spinning process with customized multi-channel spinneret.The remarkable structure features of the resulting fiber supercapacitor with wrinkled and thin electrolyte layer, and well-developed porosity of fiber electrode favored the rapid infiltration and transport of electrolyte ions inside the electrode, as well as between electrode and electrolyte, thus boosting high specific capacitance of 187.6 mF cm^(-2) and energy density of 30.2 μWh cm^(-2), and featuring long cycling life(93%capacitance retention after 10,000 cycles) and excellent flexibility. Moreover, the specific capacitance and energy density could be further improved to 267.2 m F cm^(-2) and 66.8 μWh cm^(-2), respectively, when Mn O2 was incorporated into the fiber.

A rapid one-step electrodeposition process for fabrication of superhydrobic surfaces on anode and cathode

This work presents a method to solve the weak solubility of zinc chloride(ZnCl_2) in the ethanol by adding some reasonable water into an ethanol electrolyte containing ZnCl_2 and myristic acid(CH_3(CH_2)_(12)COOH).A rapid one-step electrodeposition process was developed to fabricate anodic(2.5 min) and cathodic(40 s) superhydrophobic surfaces of copper substrate(contact angle more than 150°) in an aqueous ethanol electrolyte.Morphology,composition,chemical structure and superhydrophobicity of these superhydrophobic surfaces were investigated by SEM,FTIR,XRD,and contact angle measurement,respectively.The results indicate that water ratio of the electrolyte can reduce the required deposition time,superhydrophobic surface needs over 30 min with anhydrous electrolyte,while it needs only 2.5 min with electrolyte including 10 mL water,and the maximum contact angle of anodic surface is 166° and that of the cathodic surface is 168°.Two copper electrode surfaces have different reactions in the process of electrodeposition time,and the anodic copper surface covers copper myristate(Cu[CH_3(CH_2)_(12)COO]_2) and cupric chloride(CuCl);while,zinc myristate(Zn[CH_3(CH_2)_(12)COO]_2) and pure zinc(Zn) appear on the cathodic surface.

ONE-STEP LEACHING OF SOME REFRACTORY GOLD CONCENTRATECONTAINING ARSENIC AND THEORY ANALYSIS

A new technology of one-step leaching of refractory gold concentrate containing arsenic and sulfur was studied and 96. 8% of gold was extracted in an hour by this technology. Themodynamic possibility of reactions of arsenopyrite. pyrite and gold with sodium hypochlorite in NaOH medium, and solution chemistry of H3AuO3 at different pH values were analyzed. The reason why the gold wrapped by FeAsS, FeS2 can be leached out rapidly by grnding of porcelain ball mill. is explained.

Preparation of CdSe/ZnSe Core-shell Nanocrystal in One-step Reaction

High-quality Zn-doped CdSe core-shell nanocrystals were successfully prepared by incorporating a stoichiometric amount of Zn precursor into the CdSe reaction system, in which the Se precursor was excess and an Se-rich surface was formed. By injecting different amounts of Zn precursor, the core-shell nanocrystals demonstrated by the emission spectra were formed. The obtained Zn-doped CdSe nanocrystals exhibit a photoluminescence efficiency from 30% to 85%, which is comparable to those for the reported CdSe/ZnS, CdSe/CdS in the literature. In particular, a shell ZnSe layer with different thicknesses of ZnSe can be formed in this experiment by only changing the amount of Zn precursor added, which is simple and effective.

One-step Synthesis of ε-Caprolactam by the Liquid Phase Nitrosation of Cyclohexane over the Catalysts Containing CH_3COO^- or —COOH

ε-Caprolactam（CL or CPL） is one of the most important intermediates used in polymer industry for the production of several million tons of nylon-6 every year^[1]. All current commercial processes for the production of caprolactam are based on either benzene or tolueneI21. Caprolactam is synthesized by the Beckmann rearrangement of cyclohexanone oxime with fuming sulfuric acid or sulfuric acid as the reaction medium, and cyclohexanone oxime is produced by the reaction between cyclohexanone and hydro- xylamine（only one exception is the Toray PNC process）.

One-step electrodeposition to fabricate robust superhydrophobic silver/graphene coatings with excellent stability

A facile method was proposed to prepare stretchable silver-based composite coatings with excellent conductivity and stability for flexible electronics.Silver coating was firstly deposited on thermoplastic polyurethane(TPU)elastomer rubber surface via two-component spraying technique,then the superhydrophobic surface was obtained by one-step electrodeposition of cerium compounds(CeM)and graphene nanosheets(GNS)to produce Ag/CeM/GNS composite coatings.The obtained Ag/CeM/GNS composite coatings maintained high conductivity after experiencing bending cycles and stretching cycles.Furthermore,the as-prepared Ag/CeM/GNS composite coatings showed excellent self-cleaning and anti-fouling properties,and the corrosion resistance has improved significantly compared to the original Ag coating.In addition,the Ag/CeM/GNS composite coatings could drive the circuit normally in the states of tensile,bending and twisting deformation,showing excellent mechanical stability and applicability.As a result,it is believed that the prepared Ag/CeM/GNS composite coatings with excellent conductivity and stability have promising applications for flexible electronics in harsh conditions.