Calculation and prediction of divertor detachment via impurity seeding by using one-dimensional model

Achieving the detachment of divertor can help to alleviate excessive heat load and sputtering problems on the target plates,thereby extending the lifetime of divertor components for fusion devices.In order to provide a fast but relatively reliable prediction of plasma parameters along the flux tube for future device design,a one-dimensional(1D)modeling code for the operating point of impurity seeded detached divertor is developed based on Python language,which is a fluid model based on previous work(Plasma Phys.Control.Fusion 58045013(2016)).The experimental observation of the onset of divertor detachment by neon(Ne)and argon(Ar)seeding in EAST is well reproduced by using the 1D modeling code.The comparison between the 1D modeling and two-dimensional(2D)simulation by the SOLPS-ITER code for CFETR detachment operation with Ne and Ar seeding also shows that they are in good agreement.We also predict the radiative power loss and corresponding impurity concentration requirement for achieving divertor detachment via different impurity seeding under high heating power conditions in EAST and CFETR phase II by using the 1D model.Based on the predictions,the optimized parameter space for divertor detachment operation on EAST and CFETR is also determined.Such a simple but reliable 1D model can provide a reasonable parameter input for a detailed and accurate analysis by 2D or three-dimensional(3D)modeling tools through rapid parameter scanning.

FOUNDATION OF NUCLEAR ALGEBRAIC MODELS

Based upon Tomonoga-Rowe's many body theory, we find that the algebraic models, including IBM and FDSM are simplest extension of Rowe-Rosensteel's sp(3R).Dynkin-Gruber's subalgebra embedding method is applied to find an appropriate algebra and it's reduction chains conforming to physical requirement. The separated cases sp(6) and so(8) now appear as two branches stemming from the same root D6-O(12). Transitional ease between sp(6) and so(8) is inherently include.

Numerical Simulation of the Whole Three-Dimensional Flow in a Stirred Tank with Anisotropic Algebraic Stress Model

In accordance to the anisotropic feature of turbulent flow, ananisotropic algebraic stress model is adopted to predict theturbulent flow field and turbulent characteristics generated by aRushton disc turbine with the improved inner-outer iterativeprocedure. The predicted turbulent flow is compared with experimentaldata and the simulation by the standard k-ε turbulence model. Theanisotropic algebraic stress model is found to give better predictionthan the standard k-ε turbulence model. The predicted turbulent flowfield is in accordance to experimental data and the trend of theturbulence intensity can be effectively reflected in the simulation.

The rough representation and measurement of quotient structure in algebraic quotient space model

Granular computing is a very hot research field in recent years. In our previous work an algebraic quotient space model was proposed,where the quotient structure could not be deduced if the granulation was based on an equivalence relation. In this paper,definitions were given and formulas of the lower quotient congruence and upper quotient congruence were calculated to roughly represent the quotient structure. Then the accuracy and roughness were defined to measure the quotient structure in quantification. Finally,a numerical example was given to demonstrate that the rough representation and measuring methods are efficient and applicable. The work has greatly enriched the algebraic quotient space model and granular computing theory.

A study on the numerical prediction method for the vertical thermal structure in the Bohai Sea and the Huanghai Sea-I.One-dimensional numerical prediction model

In this paper, on the basis of the heat conduction equation without consideration of the advection and turbulence effects, one-dimensional model for describing surface sea temperature ( T1), bottom sea temperature ( Tt ) and the thickness of the upper homogeneous layer ( h ) is developed in terms of the dimensionless temperature θT and depth η and self-simulation function θT - f(η) of vertical temperature profile by means of historical temperature data.The results of trial prediction with our one-dimensional model on T, Th, h , the thickness and gradient of thermocline are satisfactory to some extent.

Algebraic Attack on Filter-Combiner Model Keystream Generators

Algebraic attack was applied to attack Filter-Combintr model keystreamgenerators. We proposed the technique of function composition to improve the model, and the improvedmodel can resist the algebraic attack. A new criterion for designing Filter-Combiner model was alsoproposed: the total length I. of Linear Finite State Machines used in the model should be largeenough and the degree d of Filter-Combiner function should be approximate [L/2].

Reconstructing the upper ocean thermal profiles using one-dimensional numerical model

The observation data for 5 d at a station in the South China Sea is presented. After brief anMysis of the wind speed, air temperature from the ship-borne meteorological instruments and temperature and salinity profiles from the CTD （conductivity, temperature, depth recorder） data, the authors find that the CTD casts are too sparse for us to understand the diurnal evolution of the thermal structure in the upper ocean. A one-dimensional （1D） numericM code based on Mellor-Yamada turbulence closure model is used to reconstruct the upper ocean thermal structure, utilizing the atmospheric forcing data from ship-borne weather station. The simulation results show good agreement with the observational data; the significance of breaking waves is also briefly discussed. The evolution of turbulence kinetic energy （TKE） and the contribution from shear production and buoy- ancy production are discussed respectively. Finally, several possible factors which might influence the numerical results are briefly analyzed.

Algebraic or Algorithmic: Searching for Optimal Solutions in Multi-Stage Supply Chain Models

In this paper we proposed an AMH Supply Chain model to obtain optimal solutions for Two-, Three- and Four-Stage for deterministic models. Besides deriving its algebraic solutions, a simple searching method is successfully applied in obtaining optimal total costs and its integer multipliers. Our model has shown promising results in comparison to Equal Cycle Time and other existing ones. The tests focused on obtaining optimal total annual costs and other related details of Two-, Three- and Four-Stage for deterministic models. The results are run under Visual Basic Programming platform using Intel? CoreTM2 Duo T6500 Processor.

su(1,2) Algebraic Structure of XYZ Antiferromagnetic Model in Linear Spin-Wave Frame

The XYZ antiferromagnetic model in linear spin-wave frame is shown explicitly to have an su（1,2） algebraic structure： the Hamiltonian can be written as a linear function of the su（1,2） algebra generators. Based on it, the energy eigenvalues are obta/ned by making use of the similar transformations, and the algebraic diagonalization method is investigated. Some numerical solutions are given, and the results indicate that only one group solution could be accepted in physics.

A Dugdale-Barenblatt model for elliptical orifice problem with asymmetric cracks in one-dimensional orthorhombic quasicrystals

By means of Muskhelishvili’s method and the technique of generalized conformal mapping,the physical plane problems are transformed into regular mathematical problems in quasicrystals(QCs).The analytical solution to an elliptical orifice problem with asymmetric cracks in one-dimensional(1D)orthorhombic QCs is obtained.By using the Dugdale-Barenblatt model,the plastic simulation at the crack tip of the elliptical orifice with asymmetric cracks in 1D orthorhombic QCs is performed.Finally,the size of the atomic cohesive force zone is determined precisely,and the size of the atomic cohesive force zone around the crack tip of an elliptical orifice with a single crack or two symmetric cracks is obtained.

Research on the Application of the Radiative Transfer Model Based on Deep Neural Network in One-dimensional Variational Algorithm

As a typical physical retrieval algorithm for retrieving atmospheric parameters,one-dimensional variational(1 DVAR)algorithm is widely used in various climate and meteorological communities and enjoys an important position in the field of microwave remote sensing.Among algorithm parameters affecting the performance of the 1 DVAR algorithm,the accuracy of the microwave radiative transfer model for calculating the simulated brightness temperature is the fundamental constraint on the retrieval accuracies of the 1 DVAR algorithm for retrieving atmospheric parameters.In this study,a deep neural network(DNN)is used to describe the nonlinear relationship between atmospheric parameters and satellite-based microwave radiometer observations,and a DNN-based radiative transfer model is developed and applied to the 1 DVAR algorithm to carry out retrieval experiments of the atmospheric temperature and humidity profiles.The retrieval results of the temperature and humidity profiles from the Microwave Humidity and Temperature Sounder(MWHTS)onboard the Feng-Yun-3(FY-3)satellite show that the DNN-based radiative transfer model can obtain higher accuracy for simulating MWHTS observations than that of the operational radiative transfer model RTTOV,and also enables the 1 DVAR algorithm to obtain higher retrieval accuracies of the temperature and humidity profiles.In this study,the DNN-based radiative transfer model applied to the 1 DVAR algorithm can fundamentally improve the retrieval accuracies of atmospheric parameters,which may provide important reference for various applied studies in atmospheric sciences.

Simulation of the Influence of Ion-Produced NO_X and HO_X Radicals on the Antarctic Ozone Depletion with a One-Dimensional Model

A one -dimensional time-dependent photochemical model is used to simulate the influence of ion-produced NOx and HOx radicals on the Antarctic ozone depletion in polar night and polar spring at a latitude of 73 degrees south.Vertical transport and nitrogen-oxygen (NOx). hydrogen-oxygen (HOx) production by ionic reactions have been introduced into the model.NOx and HOx produced by precipitating ions are transported into the lower stratosphere by vertical motion and have some effects in the development of the Antarctic ozone depletion.From winter through spring the calculated ozone column decreases to 269.4 DU. However, this value is significantly higher than the total ozone observed at several Antarctic ozone stations.

Explicit Algebraic Stress Model for Three-Dimensional Turbulent Buoyant Flows Derived Using Tensor Representation

An explicit algebraic stress model (EASM) has been formulated for two-dimensional turbulent buoyant flows using a five-term tensor representation in a prior study. The derivation was based on partitioning the buoyant flux tensor into a two-dimensional and a three-dimensional component. The five-term basis was formed with the two-dimensional component of the buoyant flux tensor. As such, the derived EASM is limited to two-dimensional flows only. In this paper, a more general approach using a seven-term representation without partitioning the buoyant flux tensor is used to derive an EASM valid for two- and three-dimensional turbulent buoyant flows. Consequently, the basis tensors are formed with the fully three-dimensional buoyant flux tensor. The derived EASM has the two-dimensional flow as a special case. The matrices and the representation coefficients are further simplified using a four-term representation. When this four-term representation model is applied to calculate two-dimensional homogeneous buoyant flows, the results are essentially identical with those obtained previously using the two-dimensional component of the buoyant flux tensor. Therefore, the present approach leads to a more general EASM formulation that is equally valid for two- and three-dimensional turbulent buoyant flows.

Entanglement in the Quantum Phase Transition of the Half-Integer Spin One-Dimensional Heisenberg Model

We use the Bethe’s ansatz method to study the entanglement of spinons in the quantum phase transition of half integer spin one-dimensional magnetic chains known as quantum wires. We calculate the entanglement in the limit of the number of particles . We obtain an abrupt change in the entanglement next the quantum phase transition point of the anisotropy parameter ?from the gapped phase ?to gapless phase .

Atmosphere-Ocean Coupling Schemes in a One-Dimensional Climate Model

In this paper, the coupling schemes of atmosphere-ocean climate models are discussed with one-dimensional advection equations. The convergence and stability for synchronous and asynchronous schemes are demonstrated and compared.Conclusions inferred from the analysis are given below. The synchronous scheme as well as the asynchronous-implicit scheme in this model are stable for arbitrary integrating time intervals. The asynchronous explicit scheme is unstable under certain conditions, which depend upon advection velocities and heat exchange parameters in the atmosphere and oceans. With both synchronous and asynchronous stable schemes the discrete solutions converge to their unique exact ones. Advections in the atmosphere and ocean accelerate the rate of convergence of the asynchronous-implicit scheme. It is suggusted that the asynchronous-implicit coupling scheme is a stable and efficient method for most climatic simulations.

A SOLVABLE ONE-DIMENSIONAL ALLOCATION DECISION MODEL OF RENEWABLE RESOURCES

In the paper, the determinate atlecation decision model and the probabilistic allocation decision model of a kind of renewable resource are separatly studied by means of dynamic programming, and the optimal allocation policy is given under some special conditions.

Algebraic-Stress Turbulent Model of Planar 2-D Pollutant Transportation in Curvilinear Coordinates

The shallow-water equations and pollutant convective-diffusive equation are transformed into curvilinear coordinate system. The anisotropic algebraic-stress turbulent model is introduced to simulate the turbulence items, and algebraic-stress turbulent model of planar 2-D pollutant convective-diffusive in curvilinear coordinates is build. The meandering channel with measured data of concentration in lab is adopted to validate the model, and the distribution figure of pollutant concentration field calculated through this model and that of the k-ε model, which show the model is superior to k-ε turbulent model in dealing with anisotropy character of flow.

An Analytical Solution for One-Dimensional Water Infiltration and Redistribution in Unsaturated Soil

Soil infiltration and redistribution are important processes in field water cycle, and it is necessary to develop a simple model to describe the processes. In this study, an algebraic solution for one-dimensional water infiltration and redistribution without evaporation in unsaturated soil was developed based on Richards equation. The algebraic solution had three parameters, namely, the saturated water conductivity, the comprehensive shape coefficient of the soil water content distribution, and the soil suction allocation coefficient. To analyze the physical features of these parameters, a relationship between the Green-Ampt model and the algebraic solution was established. The three parameters were estimated based on experimental observations, whereas the soil water content and the water infiltration duration were calculated using the algebraic solution. The calculated soil water content and infiltration duration were compared with the experimental observations, and the results indicated that the algebraic solution accurately described the unsaturated soil water flow processes.

Evolution of Bond-Order-Wave Phase in One-Dimensional Mott Insulators

In this paper, by using the level spectroscopy method and bosonization theory, we discuss the evolution of the bond-order-wave （BOW） phase in a one-dimensional half-filled extended Hubbard model wlth the on-site Coulomb repulsion U as well as the inter-site Coulomb repulsion V and antiferromagnetic exchange J. After clarifying the generic phase diagrams in three limiting cases with one of the parameters being fixed at zero individually, we find that the BOW phase in the U-V phase diagram is initially enlarged as J increases from zero but is eventually suppressed as J increases further in the strong-coupling regime. A three-dimensional phase diagram is suggested where the BOW phase exists in an extended region separated from the spin-density-wave and charge-density-wave phases.

Algebraic Method‑Based Point‑to‑Point Trajectory Planning of an Under‑Constrained Cable‑Suspended Parallel Robot with Variable Angle and Height Cable Mast

To avoid impacts and vibrations during the processes of acceleration and deceleration while possessing flexible working ways for cable-suspended parallel robots(CSPRs),point-to-point trajectory planning demands an under-constrained cable-suspended parallel robot(UCPR)with variable angle and height cable mast as described in this paper.The end-effector of the UCPR with three cables can achieve three translational degrees of freedom(DOFs).The inverse kinematic and dynamic modeling of the UCPR considering the angle and height of cable mast are completed.The motion trajectory of the end-effector comprising six segments is given.The connection points of the trajectory segments(except for point P3 in the X direction)are devised to have zero instantaneous velocities,which ensure that the acceleration has continuity and the planned acceleration curve achieves smooth transition.The trajectory is respectively planned using three algebraic methods,including fifth degree polynomial,cycloid trajectory,and double-S velocity curve.The results indicate that the trajectory planned by fifth degree polynomial method is much closer to the given trajectory of the end-effector.Numerical simulation and experiments are accomplished for the given trajectory based on fifth degree polynomial planning.At the points where the velocity suddenly changes,the length and tension variation curves of the planned and unplanned three cables are compared and analyzed.The OptiTrack motion capture system is adopted to track the end-effector of the UCPR during the experiment.The effectiveness and feasibility of fifth degree polynomial planning are validated.