Hydrodynamic Simulation of the Pagasitikos Gulf, Greece

Semi-enclosed sea basins have difficulty in recharging their waters due to limited communication with larger water bodies, with understandable consequences for their environmental status. This paper aims at the computational simulation of the hydrodynamic characteristics of the waters of the Pagasitikos Gulf (Greece), which has limited communication and water exchange with the Aegean Sea and is subject to intense environmental pressures The Estuary, Lake & Coastal Ocean 3d hydrodynamic Model (ELCOM 2.2) combined with its later version Aquatic Ecosystem Model-3d (AEM3D) were used for the simulation. The simulation included the topography of the area, the bay’s bottom geometry, atmospheric loadings, tides, the influence of the Coriolis force and boundary conditions. The hydrodynamic behaviour of the bay, water circulation, velocities at the surface and in depth, water recharge and residence time throughout the bay, density variation and other factors were examined to determine the impact of all these on the aquatic ecosystem.

Numerical simulation of typhoon- induced storm surge on the coast of Jiangsu Province,China,based on coupled hydrodynamic and wave models

In order to facilitate engineering design and coastal flooding protection, the potential storm surge induced by a typhoon is studied.Using an unstructured mesh, a coupled model which combines the advanced circulation （ ADCIRC ） hydrodynamic model and simulating waves nearshore （ SWAN ） model is applied to analyze the storm surge and waves on the coast of Jiangsu Province.The verifications of wind velocity, tidal levels and wave height show that this coupling model performs well to reflect the characteristics of the water levels and waves in the studied region.Results show that the effect of radiation stress on storm surge is significant, especially in shallow areas such as the coast of Jiangsu Province and the Yangtze estuary.By running the coupled model, the simulated potential flooding results can be employed in coastal engineering applications in the Jiangsu coastal area, such as storm surge warnings and extreme water level predictions.

Effects of Loading Paths on Hydrodynamic Deep Drawing with Independent Radial Hydraulic Pressure of Aluminum Alloy Based on Numerical Simulation

In order to meet the forming demands for low plasticity materials and large height-diameter ratio parts, a new process of hydrodynamic deep drawing （HDD） with independent radial hydraulic pressure is proposed. To investigate the effects of loading paths on the HDD with independent radial hydraulic pressure, the forming process of 5A06 aluminum alloy cylindrical cup with a hemispherical bottom was studied by numerical simulation. By employing the dynamic explicit analytical software ETA/Dynaform based on LS-DYNA3D, the effects of loading paths on the sheet-thickness distribution and surface quality were analyzed. The corresponding relations of the radial hydraulic pressure loading paths and the part＇s strain status on the forming limit diagram （FLD） were also discussed. The results indicated that a sound match between liquid chamber pressure and independent radial hydraulic pressure could restrain the serious thinning at the hemisphere bottom and that through adjusting radial hydraulic pressure could reduce the radial tensile strain and change the strain paths. Therefore, the drawing limit of the aluminum cylindrical cup with a hemispherical bottom could be increased significantly.

Numerical simulation of the hydrodynamics within octagonal tanks in recirculating aquaculture systems

A three-dimensional numerical model was established to simulate the hydrodynamics within an octagonal tank of a recirculating aquaculture system. The realizable k-e turbulence model was applied to describe the flow, the discrete phase model （DPM） was applied to generate particle trajectories, and the governing equations are solved using the finite volume method. To validate this model, the numerical results were compared with data obtained from a full-scale physical model. The results show that： （1） the realizable k-e model applied for turbulence modeling describes well the flow pattern in octagonal tanks, giving an average relative error of velocities between simulated and measured values of 18% from contour maps of velocity magnitudes; （2） the DPM was applied to obtain particle trajectories and to simulate the rate of particle removal from the tank. The average relative error of the removal rates between simulated and measured values was 11%. The DPM can be used to assess the self-cleaning capability of an octagonal tank; （3） a comprehensive account of the hydrodynamics within an octagonal tank can be assessed from simulations. The velocity distribution was uniform with an average velocity of 15 cm/s; the velocity reached 0.8 m/s near the inlet pipe, which can result in energy losses and cause wall abrasion; the velocity in tank corners was more than 15 cm/s, which suggests good water mixing, and there was no particle sedimentation. The percentage of particle removal for octagonal tanks was 90% with the exception of a little accumulation of 〈5 mm particle in the area between the inlet pipe and the wall. This study demonstrated a consistent numerical model of the hydrodynamics within octagonal tanks that can be further used in their design and optimization as well as promote the wide use of computational fluid dynamics in aquaculture engineering.

CFD-PBE simulation of gas-phase hydrodynamics in a gas-liquid-solid combined loop reactor

The computational fluid dynamics （CFD）-population balance equations （PBE） coupled model is employed to investigate the hydrodynamics in a gas-slurry internal loop reactor with external slurry circulation. The predicted radial profiles of local gas holdup and bubble diameter are in good agreement with the corresponding experimental data. The spatio-temporal velocity profile of the gas phase reveals that the upward movement of gas is slowed down and the residence time of gas is prolonged by the downward momentum of the slurry, introduction of the external slurry can greatly improve the uniformity of gas holdup distribution in the reactor, especially in the downcomer-tube action region. Moreover, the interaction between the downward slurry and upward gas can lead to small bubble size and high interfacial area as well as good mass and heat transfer. The above results suggest the function of external slurry circulation for the internal loop reactor and would be helpful for optimizing the design and scale up of reactors.

Physical simulation of hydrodynamic conditions in high rank coalbed methane reservoir formation

In order to select highly productive and enriched areas of high rank coalbed methane reservoirs, based on hydrologic geology as one of the main factors controlling coalbed methane （CBM） reservoir formations, the effect of hydrodynamic forces controlling CBM reservoir formations was studied by a physical simulation experiment in which we used CBM reservoir simulation facilities. The hydrodynamic conditions of high coal rank reservoirs in the Qinshui basin were analyzed. Our experiment shows the following results： under strong hydrodynamic alternating action, 6C~ of coalbed methane reservoir changed from the start at -2.95% ~ -3.66%, and the lightening process occurred in phases; the CI-I4 volume reduced from 96.35% to 12.42%; the CO2 vo- lume decreased from 0.75% in sample 1 to 0.68% in sample 2, then rose to 1.13% in sample 3; the N2 volume changed from 2.9% in sample 1 to 86.45% in sample 3. On one hand, these changes show the complexity of CBM reservoir formation; on the other hand, they indicate that strong hydrodynamic actions have an unfavorable impact on CBM reservoir formation. It was found that the gas volume and hydrodynamic intensity were negatively correlated and low hydrodynamic flow conditions might result in highly productive and enriched areas of high rank CBM.

Quasi-3D Numerical Simulation of Tidal Hydrodynamic Field

Based on the 2D horizontal plane numerical model, a quasi-3D numerical model is established for coastal regions of shallow water. The characteristics of this model are that the velocity profiles;can be obtained at the same time when the equations of the value of difference between the horizontal current velocity and its depth-averaged velocity in the vertical direction are solved and the results obtained are consistent with the results of the 2D, model. The circulating flow in the rectangular area induced by wind is simulated and applied to the tidal flow field of the radial sandbanks in the South Yellow Sea. The computational results from this quasi-3D model are in good agreement with analytical results and observed data. The solution of the finite difference equations has been found to be stable, and the model is simple, effective and practical.

Physical modeling based on hydrodynamic simulation for the design of InGaAs/InP double heterojunction bipolar transistors

A physical model for scaling and optimizing InGaAs/InP double heterojunction bipolar transistors（DHBTs） based on hydrodynamic simulation is developed.The model is based on the hydrodynamic equation,which can accurately describe non-equilibrium conditions such as quasi-ballistic transport in the thin base and the velocity overshoot effect in the depleted collector.In addition,the model accounts for several physical effects such as bandgap narrowing,variable effective mass,and doping-dependent mobility at high fields.Good agreement between the measured and simulated values of cutoff frequency,f t,and maximum oscillation frequency,f max,are achieved for lateral and vertical device scalings.It is shown that the model in this paper is appropriate for downscaling and designing InGaAs/InP DHBTs.

6-DOF Motion Assessment of A Hydrodynamic Numerical Simulation of A Semisubmersible Platform Using Prototype Monitoring Data

Hydrodynamic numerical simulations are used to conduct structural analyses and inform the design of engineered marine structures.In this paper,a hydrodynamic numerical model of“Nanhai Tiaozhan”(NHTZ)FPS platform was established according to its design specifications.The model was assessed with two sets of field monitoring data representing harsh and conventional sea states.The motion responses of the platform according to the measured data and the hydrodynamic simulation were compared by reviewing their statistical characteristics,distributions,and spectrum characteristics.The comparison showed that the hydrodynamic model could correctly simulate the frequency domain characteristics of the motion responses of the platform.However,the simulation underestimated the reciprocating motions of the floating body and the influence of slow drift on the motion of the platform.Meanwhile,analysis of the monitoring data revealed that the translational degrees of freedom(DOF)and rotational DOF of the platform were coupled,but these coupled motion states were not apparent in the hydrodynamic simulation.

Numerical Simulation of the Hydrodynamic Characteristics of the Porous I-type Composite Breakwater

Based on the three-dimensional Reynolds-averaged Navier-Stokes equation with the closure of renormalization group k-εturbulence model and volume of fluid method,a wave-breakwater interaction numerical flume was developed to examine the wave-structure interaction of the porous I-type composite(PITC)breakwater.The transmission and reflection coefficients of the breakwater at different wave steepness H/L are quantitatively analyzed,and the wave-dissipating performance of the breakwater is compared.By changing the submerged depth of the breakwater,the velocity field,and vorticity field in the wave propagation process are analyzed,and the optimal working water depth of the new breakwater is explored.The results show that the vertical wave force on the PITC breakwater is greater than the horizontal wave force.In addition,during the wave dissipation process,the transverse baffle provided by the new breakwater destroys the trajectory of the water particle.In the interior of the wave-breaking chamber,the water that enters from the gap of the permeable plate mixes with the water entering through the bottom hole.The turbulence created by this process further dissipates the wave energy.The relative submergence depth of h/d has a great influence on the hydrodynamic characteristics.When the relative depth is large,most of the wave energy enters the breakwater,the wave energy dissipation of the breakwater is large,and the wave-absorbing effect is good.These research results provide important referential data for the study of permeable plate breakwaters.

High Resolution Ship Hydrodynamics Simulations in Open Source Environment

The numerical simulation of wake and flee-surface flow around ships is a complex topic that involves multiple tasks： the generation of an optimal computational grid and the development of numerical algorithms capable to predict the flow field around a hull. In this paper, a numerical framework is developed aimed at high-resolution CFD simulations of turbulent, free-surface flows around ship hulls. The framework consists in the concatenation of ＂tools＂, partly available in the open-source finite volume library OpenFOAM. A novel, flexible mesh-generation algorithm is presented, capable of producing high-quality computational grids for free-surface ship hydrodynamics. The numerical frame work is used to solve some benchmark problems, providing results that are in excellent agreement with the experimental measures.

Radiation Hydrodynamic Simulations in the Planar Scheme for the Fundamental Studies of Shock Ignition

As a fundamental and crucial research topic in the direct-driven inertial confinement fusion（ICF）,especially for shock ignition（SI）,investigation on the laser coupling with planar lowZ targets is beneficial for deep physical comprehension at the primary phase of SI.The production of the intense shock and the shock coalescence in the multi-layer targets,driven by the 3ω intense laser（351 nm the wavelength）,were studied in detail with the 1D and 2D radiation hydrodynamic simulations.It was inferred that the 1D simulation would overrate the shock velocity and the ablation pressure of the spike;the coalescence time and the velocity of the coalescence shock depended evidently on the pulse shape and the start time of the spike.The present study can also provide a semi-quantitative reference for the design of the SI decomposition experiments on the Shenguang-III prototype laser facility.

Numerical simulation of hydrodynamic characteristics during the diversion closure in a horizontal tunnel

Based on water inrush accident of 1841 working face of Desheng Coal Mine in Wu'an, Hebei province, China, an evaluation model of hydrodynamic characteristics of the project is set up and simulated using Matlab. It is assumed that the pipe flow would transform into seepage flow when the aggregates are plugged into the water inrush channel and the seepage flow would disappear along with grouting process. The simulation results show that the flow velocity will increase with an increase in height of aggregates accumulation body during the aggregates filling process; the maximum seepage velocity occurs on the top of plugging zone; and the water flow decreases with increasing plugging height of water inrush channel. Finally, the field construction results show that the water inrush channel can be plugged effectively by the compacted body prepared with aggregate and cement slurry.

Real-time Simulation of Gas Based on Smoothed Particle Hydrodynamics

This paper extends the SPH method to gas simulation. The SPH （Smoothed Particles Hydrodynamics） method is the most popular method of flow simulation, which is widely used in large-scale liquid simulation. However, it is not found to apply to gas simulation, since those methods based on SPH can＇t be used in real-time simulation due to their enormous particles and huge computation. This paper proposes a method for gas simulation based on SPH with a small number of particles. Firstly, the method computes the position and density of each particle in each point-in-time, and outlines the shape of the simulated gas based on those particles. Secondly the method uses the grid technique to refine the shape with the diffusion of particle＇s density under the control of grid, and get more lifelike simulation result. Each grid will be assigned density according to the particles in it. The density determines the final appearance of the grid. For ensuring the natural transition of the color between adjacent grids, we give a diffuse process of density between these grids and assign appropriate values to vertexes of these grids. The experimental results show that the proposed method can give better gas simulation and meet the request of real-time.

Simulation of Hydrodynamic Phenomena by the Lattice-Boltzmann Method

In this paper. a general parallelcooput lug model for simulating the two-dimensional hydrodynamic problems by the LB method is introduced. The pract ice shows that this Model is able to deal with a variety of boundaries and simulate a wide range of Reynolds numbers for two-dlinensional hydrodynamic phenomena. Numerical simulations are shown to confim the exper imental resulis.

Simulation of microswimmer hydrodynamics with multiparticle collision dynamics

In this review we discuss the recent progress in the simulation of soft active matter systems and in particular the hydrodynamics of microswimmers using the method of multiparticle collision dynamics,which solves the hydrodynamic flows around active objects on a coarse-grained level.We first present a brief overview of the basic simulation method and the coupling between microswimmers and fluid.We then review the current achievements in simulating flexible and rigid microswimmers using multiparticle collision dynamics,and briefly conclude and discuss possible future directions.

An efficient non-iterative smoothed particle hydrodynamics fluid simulation method with variable smoothing length

In classical smoothed particle hydrodynamics(SPH)fluid simulation approaches,the smoothing length of Lagrangian particles is typically constant.One major disadvantage is the lack of adaptiveness,which may compromise accuracy in fluid regions such as splashes and surfaces.Attempts to address this problem used variable smoothing lengths.Yet the existing methods are computationally complex and non-efficient,because the smoothing length is typically calculated using iterative optimization.Here,we propose an efficient non-iterative SPH fluid simulation method with variable smoothing length(VSLSPH).VSLSPH correlates the smoothing length to the density change,and adaptively adjusts the smoothing length of particles with high accuracy and low computational cost,enabling large time steps.Our experimental results demonstrate the advantages of the VSLSPH approach in terms of its simulation accuracy and efficiency.

Simulation of the Influence of Ion-Produced NO_X and HO_X Radicals on the Antarctic Ozone Depletion with a One-Dimensional Model

A one -dimensional time-dependent photochemical model is used to simulate the influence of ion-produced NOx and HOx radicals on the Antarctic ozone depletion in polar night and polar spring at a latitude of 73 degrees south.Vertical transport and nitrogen-oxygen (NOx). hydrogen-oxygen (HOx) production by ionic reactions have been introduced into the model.NOx and HOx produced by precipitating ions are transported into the lower stratosphere by vertical motion and have some effects in the development of the Antarctic ozone depletion.From winter through spring the calculated ozone column decreases to 269.4 DU. However, this value is significantly higher than the total ozone observed at several Antarctic ozone stations.

Parametric Instabilities of Parallel Propagating Circularly Polarized Alfven Waves:One-Dimensional Hybrid Simulations

By performing one-dimensional （l-D） hybrid simulations, we analyze in detail the parametric instabilities of the Alfv^n waves with a spectrum in a low beta plasma. The parametric instabilities experience two stages. In the first stage, the density modes are excited and immediately couple with the pump Alfv6n waves. In the second stage, each pump Alfv^n wave decays into a density mode and a daughter Alfv6n mode similar to the monochromatic cases. Ftlrthermore, the proton velocity beam will also be formed after the saturation of the parametric instabilities. When the plasma beta is high, the parametric decay in the second stage will be strongly suppressed.

Modeling and Simulation of the Hydrodynamic Behavior in a High-Density Downer Reactor

The hydrodynamic behavior in a high-density downer reactor was studied. A two-fluid model based on the kinetic theory of granular flow with a k-ε turbulent model was developed to simulate the flow behavior in the system. This simulation achieved an averaged solid fraction in the bed as high as 18% in this operating regime. The flow development in high-density downer consists of 3 regions, which are first acceleration, second acceleration, and fully developed regions. In the fully developed region, the lateral distribution of the solid volume fraction is low and almost uniform in the center region with a high density peak near the wall region. Gas and solid velocities gradually increase toward the wall and form a peak near the wall region. In addition, the solid volume fraction, gas and solid velocities increase with solid circulation rate.