Phonon States and Dispersive Spectra of Polar Optical Phonons in Quasi-One-Dimensional Nanowires of Wurtzite ZnO and Zinc-Blend MgO Semiconductors

Within the framework of the macroscopic dielectric continuum model and Loudon＇s uniaxial crystal model, the phonon modes of a wurtzite/zinc-blende one-dimensional （1D） cylindrical nanowire （NW） are derived and studied. The analytical phonon states of phonon modes are given. It is found that there exist two types of polar phonon modes, i.e. interface optical （IO） phonon modes and the quasi-confined （QC） phonon modes existing in 1D wurtzite/zinc-blende NWs. Via the standard procedure of field quantization, the Fr6hlich electron-phonon interaction Hamiltonians are obtained. Numerical calculations of dispersive behavior of these phonon modes on a wurtzite/zinc-blende ZnO/MgO NW are performed. The frequency ranges of the IO and QC phonon modes of the ZnO/MgO NWs are analyzed and discussed. It is found that the IO modes only exist in one frequency range, while QC modes may appear in three frequency ranges. The dispersive properties of the IO and QC modes on the free wave-number kz and the azimuthal quantum number m are discussed. The analytical Hamiltonians of electron-phonon interaction obtained here are quite useful for further investigating phonon influence on optoelectronics properties of wurtzite/zinc-blende 1D NW structures.

Hard Superconducting Gap in Pb Te Nanowires

Semiconductor nanowires coupled to a superconductor provide a powerful testbed for quantum device physics such as Majorana zero modes and gate-tunable hybrid qubits.The performance of these quantum devices heavily relies on the quality of the induced superconducting gap.A hard gap.

Second Harmonic Generation in Nanowires

Second harmonic generation(SHG)in optical materials serves as important techniques for laser source generations in awkward spectral ranges,physical identities of materials in crystalline symmetry and interfacial configuration.Here,we present a comprehensive review on SHGs in nanowires(NWs),which have been recognized as an important element in constructing photonic and optoelectronic devices with compact footprint and high quantum yield.Relying on NW’s one-dimensional geometry,its SHG could be employed as a sophisticated spectroscopy to determine the crystal phase and orientation,as well as the internal strain.The enhancements of SHG efficiency in NWs are discussed then,which were realized by hybrid integrating them with two-dimensional materials,nanophotonic and plasmonic structures.Finally,the potential applications of NW SHGs are concluded,including the areas of optical correlators and constructions of on-chip nano-laser sources.

Determination of Thermal Properties of Unsmooth Si Nanowires

We estimate the thermal properties of unsmooth Si nanowires,considering key factors such as size(diameter),surface texture(roughness)and quantum size effects(phonon states)at different temperatures.For nanowires with a diameter of less than 20 nm,we highlight the importance of quantum size effects in heat capacity calculations,using dispersion relations derived from the modified frequency equation for the elasticity of a rod.The thermal conductivities of nanowires with diameters of 37,56,and 115nm are predicted using the Fuchs–Sondheimer model and Soffer’s specular parameter.Notably,the roughness parameters are chosen to reflect the technological characteristics of the real surfaces.Our findings reveal that surface texture plays a significant role in thermal conductivity,particularly in the realm of ballistic heat transfer within nanowires.This study provides practical recommendations for developing new thermal management materials.

Calculation and prediction of divertor detachment via impurity seeding by using one-dimensional model

Achieving the detachment of divertor can help to alleviate excessive heat load and sputtering problems on the target plates,thereby extending the lifetime of divertor components for fusion devices.In order to provide a fast but relatively reliable prediction of plasma parameters along the flux tube for future device design,a one-dimensional(1D)modeling code for the operating point of impurity seeded detached divertor is developed based on Python language,which is a fluid model based on previous work(Plasma Phys.Control.Fusion 58045013(2016)).The experimental observation of the onset of divertor detachment by neon(Ne)and argon(Ar)seeding in EAST is well reproduced by using the 1D modeling code.The comparison between the 1D modeling and two-dimensional(2D)simulation by the SOLPS-ITER code for CFETR detachment operation with Ne and Ar seeding also shows that they are in good agreement.We also predict the radiative power loss and corresponding impurity concentration requirement for achieving divertor detachment via different impurity seeding under high heating power conditions in EAST and CFETR phase II by using the 1D model.Based on the predictions,the optimized parameter space for divertor detachment operation on EAST and CFETR is also determined.Such a simple but reliable 1D model can provide a reasonable parameter input for a detailed and accurate analysis by 2D or three-dimensional(3D)modeling tools through rapid parameter scanning.

Diameter-dependent ultra-high thermoelectric performance of ZnO nanowires

Zinc oxide(ZnO)shows great potential in electronics,but its large intrinsic thermal conductivity limits its thermoelectric applications.In this work,we explore the significant carrier transport capacity and diameter-dependent thermoelectric characteristics of wurtzite-ZnO(0001)nanowires based on first-principles and molecular dynamics simulations.Under the synergistic effect of band degeneracy and weak phonon-electron scattering,P-type(ZnO)_(73) nanowires achieve an ultrahigh power factor above 1500μW·cm^(-1)·K^(-2)over a wide temperature range.The lattice thermal conductivity and carrier transport properties of ZnO nanowires exhibit a strong diameter size dependence.When the ZnO nanowire diameter exceeds 12.72A,the carrier transport properties increase significantly,while the thermal conductivity shows a slight increase with the diameter size,resulting in a ZT value of up to 6.4 at 700 K for P-type(ZnO)_(73).For the first time,the size effect is also illustrated by introducing two geometrical configurations of the ZnO nanowires.This work theoretically depicts the size optimization strategy for the thermoelectric conversion of ZnO nanowires.

Flexible polydimethylsiloxane pressure sensor with micro-pyramid structures and embedded silver nanowires:A novel application in urinary flow measurement

Flexible pressure sensors are lightweight and highly sensitive,making them suitable for use in small portable devices to achieve precise measurements of tiny forces.This article introduces a low-cost and easy-fabrication strategy for piezoresistive flexible pressure sensors.By embedding silver nanowires into a polydimethylsiloxane layer with micro-pyramids on its surface,a flexible pressure sensor is created that can detect low pressure (17.3 Pa) with fast response (<20 ms) and high sensitivity (69.6 mA kPa-1).Furthermore,the pressure sensor exhibits a sensitive and stable response to a small amount of water flowing on its surface.On this basis,the flexible pressure sensor is innovatively combined with a micro-rotor to fabricate a novel urinary flow-rate meter (uroflowmeter),and results from a simulated human urination experiment show that the uroflowmeter accurately captured all the essential shape characteristics that were present in the pump-simulated urination curves.Looking ahead,this research provides a new reference for using flexible pressure sensors in urinary flow-rate monitoring.

Facile Semiconductor p-n Homojunction Nanowires with Strategic p-Type Doping Engineering Combined with Surface Reconstruction for Biosensing Applications

Photosensors with versatile functionalities have emerged as a cornerstone for breakthroughs in the future optoelectronic systems across a wide range of applications.In particular,emerging photoelectrochemical(PEC)-type devices have recently attracted extensive interest in liquid-based biosensing applications due to their natural electrolyte-assisted operating characteristics.Herein,a PEC-type photosensor was carefully designed and constructed by employing gallium nitride(GaN)p-n homojunction semiconductor nanowires on silicon,with the p-GaN segment strategically doped and then decorated with cobalt-nickel oxide(CoNiO_(x)).Essentially,the p-n homojunction configuration with facile p-doping engineering improves carrier separation efficiency and facilitates carrier transfer to the nanowire surface,while CoNiO_(x)decoration further boosts PEC reaction activity and carrier dynamics at the nanowire/electrolyte interface.Consequently,the constructed photosensor achieves a high responsivity of 247.8 mA W^(-1)while simultaneously exhibiting excellent operating stability.Strikingly,based on the remarkable stability and high responsivity of the device,a glucose sensing system was established with a demonstration of glucose level determination in real human serum.This work offers a feasible and universal approach in the pursuit of high-performance bio-related sensing applications via a rational design of PEC devices in the form of nanostructured architecture with strategic doping engineering.

Fabricating AC/DC nanogenerators based on single ZnO nanowires by using a nanomanipulator in a scanning electron microscope

Single zinc oxide nanowires(ZnO NWs)are promising for nanogenerators because of their excellent semiconducting and piezoelectric properties,but characterizing the latter efficiently is challenging.As reported here,an electrical breakdown strategy was used to construct single ZnO NWs with a specific length.With the high operability of a nanomanipulator in a scanning electron microscope,ZnO-NW-based twoprobe and three-probe structures were constructed for fabricating AC/DC nanogenerators,respectively.For a ZnO NW,an AC output of between−15.31 mV and 5.82 mV was achieved,while for a DC nanogenerator,an output of24.3 mV was realized.Also,the three-probe structure’s output method was changed to verify the distribution of piezoelectric charges when a single ZnO NW is bent by a probe,and DC outputs of different amplitudes were achieved.This study provides a low-cost,highly convenient,and operational method for studying the AC/DC output characteristics of single NWs,which is beneficial for the further development of nanogenerators.

Optical Properties of GaAs/AlGaAs Nanowires Grown on Pre-etched Si Substrates

GaAs-based nanomaterials are essential for near-infrared nano-photoelectronic devices due to their exceptional optoelectronic properties.However,as the dimensions of GaAs materials decrease,the development of GaAs nanowires(NWs)is hindered by type-Ⅱquantum well structures arising from the mixture of zinc blende(ZB)and wurtzite(WZ)phases and surface defects due to the large surface-to-volume ratio.Achieving GaAs-based NWs with high emission efficiency has become a key research focus.In this study,pre-etched silicon substrates were combined with GaAs/AlGaAs core-shell heterostructure to achieve GaAs-based NWs with good perpendicularity,excellent crystal structures,and high emission efficiency by leveraging the shadowing effect and surface passivation.The primary evidence for this includes the prominent free-exciton emission in the variable-temperature spectra and the low thermal activation energy indicated by the variable-power spectra.The findings of this study suggest that the growth method described herein can be employed to enhance the crystal structure and optical properties of otherⅢ-Ⅴlow-dimensional materials,potentially paving the way for future NW devices.

Numerical Investigations on the Resonance Errors of Multiscale Discontinuous Galerkin Methods for One-Dimensional Stationary Schrödinger Equation

In this paper,numerical experiments are carried out to investigate the impact of penalty parameters in the numerical traces on the resonance errors of high-order multiscale discontinuous Galerkin(DG)methods(Dong et al.in J Sci Comput 66:321–345,2016;Dong and Wang in J Comput Appl Math 380:1–11,2020)for a one-dimensional stationary Schrödinger equation.Previous work showed that penalty parameters were required to be positive in error analysis,but the methods with zero penalty parameters worked fine in numerical simulations on coarse meshes.In this work,by performing extensive numerical experiments,we discover that zero penalty parameters lead to resonance errors in the multiscale DG methods,and taking positive penalty parameters can effectively reduce resonance errors and make the matrix in the global linear system have better condition numbers.

Embedded high-quality ternary GaAs_(1−x)Sb_(x) quantum dots in GaAs nanowires by molecular-beam epitaxy

Semiconductor quantum dots are promising candidates for preparing high-performance single photon sources.A basic requirement for this application is realizing the controlled growth of high-quality semiconductor quantum dots.Here,we report the growth of embedded GaAs_(1−x)Sb_(x) quantum dots in GaAs nanowires by molecular-beam epitaxy.It is found that the size of the GaAs_(1−x)Sb_(x) quantum dot can be well-defined by the GaAs nanowire.Energy dispersive spectroscopy analyses show that the antimony content x can be up to 0.36 by tuning the growth temperature.All GaAs_(1−x)Sb_(x) quantum dots exhibit a pure zinc-blende phase.In addition,we have developed a new technology to grow GaAs passivation layers on the sidewalls of the GaAs_(1−x)Sb_(x) quantum dots.Different from the traditional growth process of the passivation layer,GaAs passivation layers can be grown simultaneously with the growth of the embedded GaAs_(1−x)Sb_(x) quantum dots.The spontaneous GaAs passivation layer shows a pure zinc-blende phase due to the strict epitaxial relationship between the quantum dot and the passivation layer.The successful fabrication of embedded high-quality GaAs_(1−x)Sb_(x) quantum dots lays the foundation for the realization of GaAs_(1−x)Sb_(x)-based single photon sources.

Synthesis and Photocatalytic Activity of One-dimensional ZnO-Zn2SnO4 Mixed Oxide Nanowires

Mixed oxide photocatalysts, ZnO-Zn2SnO4 （ZnO-ZTO） nanowires with different sizes were prepared by a simple thermal evaporation method. The ZnO-ZTO nanowires were characterized with a scanning electron microscope, X-ray diffraction, high-resolution transmission electron microscopy, energy-dispersive spectrom- eter, and X-ray photoelectron spectra. The photocatalytic activity of the ZnO-ZTO mixed nanowires were studied by observing the photodegradation behaviors of methyl orange aqueous solution. The results suggest that the ZnO-ZTO mixed oxide nanowires have a higher photocatalytic activity than pure ZnO and Zn2SnO4 nanowires. The photocatalyst concentration in the solution distinctly affects the degradation rate, and our results show that higher photodegradation efficiency can be achieved with a smaller amount of ZnO-ZTO nanowire catalyst, as compared to the pure ZnO and ZTO nanowires. Moreover, the photocatalytic activity can also be enhanced by reducing the average diameter of the nanowires. The activity of pure ZnO and ZTO nanowires are also enhanced by physically mixing them. These results can be explained by the synergism between the two semiconductors.

Hydrothermal Synthesis and Characterization of Nd Doped One-dimensional Hexagonal CePO_4 Nanowires

One-dimensional Nd doped CePO4 hexagonal nanowires have been synthesized for the first time at 140 ℃ for 24 hours via a hydrothermal method using P123 surfactant as the template.The products were characterized by X-ray diffraction,transmission electron microscopy,photoluminescence and high-resolution transmission electron microscopy.Compared with CePO4,one-dimensional nanomaterials we have synthesized,Nd doped CePO4 nanomaterials remain their hexagonal one-dimensional morphology and smooth surface.However,their photoluminescence emissions are greatly enhanced at the wavelength of 348 nm.With their novel fluorescence-emission property,the Nd doped CePO4 nanomaterials are potential in many fields such as optics and electronics.

ZnO nanowires based degradable high-performance photodetectors for eco-friendly green electronics

Disposable devices designed for single and/or multiple reliable measurements over a short duration have attracted considerable interest recently. However, these devices often use non-recyclable and non-biodegradable materials and wasteful fabrication methods. Herein, we present ZnO nanowires(NWs) based degradable high-performance UV photodetectors(PDs) on flexible chitosan substrate. Systematic investigations reveal the presented device exhibits excellent photo response, including high responsivity(55 A/W), superior specific detectivity(4×10^(14) jones), and the highest gain(8.5×10~(10)) among the reported state of the art biodegradable PDs. Further, the presented PDs display excellent mechanical flexibility under wide range of bending conditions and thermal stability in the measured temperature range(5–50 ℃).The biodegradability studies performed on the device, in both deionized(DI) water(pH≈6) and PBS solution(pH=7.4),show fast degradability in DI water(20 mins) as compared to PBS(48 h). These results show the potential the presented approach holds for green and cost-effective fabrication of wearable, and disposable sensing systems with reduced adverse environmental impact.

Coral-like and binder-free carbon nanowires for potassium dual-ion batteries with superior rate capability and long-term cycling life

Owing to the advantages of high operating voltage,environmental benignity,and low cost,potassium-based dual-ion batteries(KDIBs)have been considered as a potential candidate for large-scale energy storage.However,KDIBs generally suffer from poor cycling performance and unsatisfied capacity,and inactive components of conductive agents,binders,and current collector further lower their overall capacity.Herein,we prepare coral-like carbon nanowres(CCNWs)doped with nitrogen as a binder-free anode material for K^(+)-ion storage,in which the unique coral-like porous nanostructure and amorphous/short-range-ordered composite feature are conducive to enhancing the structural stability,to facilitating the ion transfer and to boosting the full utilization of active sites during potassiation/de-potassiation process.As a result,the CCNW anode possesses a hybrid K^(+)-storage mechanism of diffusive behavior and capacitive adsorption,and stably delivers a high capacity of 276 mAh g^(-1)at 50 mA g^(-1),good rate capability up to 2 A g^(-1),and long-term cycling stability with 93%capacity retention after 2000 cycles at 1 A g^(-1).Further,assembling this CCNW anode with an environmentally benign expanded graphite(EG)cathode yields a proof-of-concept KDIB,which shows a high specific capacity of 134.4 mAh g^(-1)at 100 mA g^(-1),excellent rate capability of 106.5 mAh g^(-1)at 1 A g^(-1),and long-term cycling stability over 1000 cycles with negligible capacity loss.This study provides a feasible approach to developing high-performance anodes for potassium-based energy storage devices.

Monodispersed ultrathin twisty PdBi alloys nanowires assemblies with tensile strain enhance C_(2+)alcohols electrooxidation

Direct alcohol fuel cells(DAFCs)are powered by the alcohol electro-oxidation reaction(AOR),where an electrocatalyst with an optimal electronic structure can accelerate the sluggish AOR.Interestingly,strain engineering in hetero-catalysis offers a promising route to boost their catalytic activity.Herein,we report on a class of monodispersed ultrathin twisty PdBi alloy nanowires(TNWs)assemblies with face-centered structures that drive AORs.These thin nanowire structures expose a large number of reactive sites.Strikingly,Pd_(6)Bi_(1)TNWs show an excellent current density of 2066,3047,and 1231 mA mg_(Pd)^(-1)for oxidation of ethanol,ethylene glycol,and glycerol,respectively.The“volcano-like”behaviors observed on PdBi TNWs for AORs indicate that the maximum catalytic mass activity is a well balance between active intermediates and blocking species at the interface.This study offers an effective and universal method to build novel nanocatalysts in various applications by rationally designing highly efficient catalysts with specific strain.

Pick-up strategies for and electrical characterization of ZnO nanowires with a SEM-based nanomanipulator

Because of their unique mechanical and electrical properties,zinc oxide(ZnO)nanowires are used widely in microscopic and nanoscopic devices and structures,but characterizing them remains challenging.In this paper,two pick-up strategies are proposed for characterizing the electrical properties of ZnO nanowires using SEM equipped with a nanomanipulator.To pick up nanowires efficiently,direct sampling is compared with electrification fusing,and experiments show that direct sampling is more stable while electrification fusing is more efficient.ZnO nanowires have cut-off properties,and good Schottky contact with the tungsten probes was established.In piezoelectric experiments,the maximum piezoelectric voltage generated by an individual ZnO nanowire was 0.07 V,and its impedance decreased with increasing input signal frequency until it became stable.This work offers a technical reference for the pick-up and construction of nanomaterials and nanogeneration technology.

Carbon nanotube-hyperbranched polymer core-shell nanowires with highly accessible redox-active sites for fast-charge organic lithium batteries

Organic electrode materials are promising for lithium-ion batteries(LIBs) because of their environmental friendliness and structural diversity.However,they always suffer from limited capacity,poor cycling stability,and rate performance.Herein,hexaazatrinaphthalene-based azo-linked hyperbranched polymer(HAHP) is designed and synthesized as a cathode for LIBs.However,the densely stacked morphology lowers the chance of the active sites participating in the redox reaction.To address this issue,the singlewalled carbon nanotube(SWCNT) template is used to induce the growth of nanosized HAHP on the surface of SWCNTs.The HAHP@SWCNT nanocomposites have porous structures and highly accessible active sites.Moreover,the strong π-π interaction between HAHP and highly conductive SWCNTs effectively endows the HAHP@SWCNT nanocomposites with improved cycling stability and fast charge-discharge rates.As a result,the HAHP@SWCNT nanocomposite cathode shows a high specific capacity(320.4 mA h g^(-1)at 100 mA g^(-1)),excellent cycling stability(800 cycles;290 mA h g^(-1)at 100 mA g^(-1),capacity retained 91%) and outstanding rate performance(235 mA h g^(-1)at 2000 mA g^(-1),76% capacity retention versus 50 mA g^(-1)).This work provides a strategy to combine the macromolecular structural design and micromorphology control of electrode materials for obtaining organic polymer cathodes for high-performance LIBs.

Optimized CeO_(2) Nanowires with Rich Surface Oxygen Vacancies Enable Fast Li-Ion Conduction in Composite Polymer Electrolytes

Low-cost and flexible solid polymer electrolytes are promising in all-solid-state Li-metal batteries with high energy density and safety.However,both the low room-temperature ionic conductivities and the small Li^(+)transference number of these electrolytes significantly increase the internal resistance and overpotential of the battery.Here,we introduce Gd-doped CeO_(2) nanowires with large surface area and rich surface oxygen vacancies to the polymer electrolyte to increase the interaction between Gd-doped CeO_(2) nanowires and polymer electrolytes,which promotes the Li-salt dissociation and increases the concentration of mobile Li ions in the composite polymer electrolytes.The optimized composite polymer electrolyte has a high Li-ion conductivity of 5×10^(-4)4 S cm^(-1) at 30℃ and a large Li+transference number of 0.47.Moreover,the composite polymer electrolytes have excellent compatibility with the metallic lithium anode and high-voltage LiNi_(0.8)Mn _(0.1)Co_(0.1)O_(2)(NMC)cathode,providing the stable cycling of all-solid-state batteries at high current densities.