A Time Series Intrusion Detection Method Based on SSAE,TCN and Bi-LSTM

In the fast-evolving landscape of digital networks,the incidence of network intrusions has escalated alarmingly.Simultaneously,the crucial role of time series data in intrusion detection remains largely underappreciated,with most systems failing to capture the time-bound nuances of network traffic.This leads to compromised detection accuracy and overlooked temporal patterns.Addressing this gap,we introduce a novel SSAE-TCN-BiLSTM(STL)model that integrates time series analysis,significantly enhancing detection capabilities.Our approach reduces feature dimensionalitywith a Stacked Sparse Autoencoder(SSAE)and extracts temporally relevant features through a Temporal Convolutional Network(TCN)and Bidirectional Long Short-term Memory Network(Bi-LSTM).By meticulously adjusting time steps,we underscore the significance of temporal data in bolstering detection accuracy.On the UNSW-NB15 dataset,ourmodel achieved an F1-score of 99.49%,Accuracy of 99.43%,Precision of 99.38%,Recall of 99.60%,and an inference time of 4.24 s.For the CICDS2017 dataset,we recorded an F1-score of 99.53%,Accuracy of 99.62%,Precision of 99.27%,Recall of 99.79%,and an inference time of 5.72 s.These findings not only confirm the STL model’s superior performance but also its operational efficiency,underpinning its significance in real-world cybersecurity scenarios where rapid response is paramount.Our contribution represents a significant advance in cybersecurity,proposing a model that excels in accuracy and adaptability to the dynamic nature of network traffic,setting a new benchmark for intrusion detection systems.

Computational uncertainty and optimal grid size and time step of the Lax-Friedrichs scheme for the 1D advection equation

本文对于应用Lax-Friedrichs格式数值求解一维平流方程,研究数值求解过程中产生的截断误差与舍入误差,以及两种误差逐层向高时间层传播的累积,得到新的数值解总误差上界的理论近似公式,以及最优格距和最优时间步长的理论公式.通过数值算例验证了所得公式的可靠性。然后,发现了两种不同机器精度下最优时间步长之比满足的一个仅与机器精度有关的普适关系.最后,理论验证了在网格比固定的情况下,此问题满足数值计算的不确定性原理,以及在机器有限精度下最优时间步长的必然存在。

Effect of Time Step Size and Turbulence Model on the Open Water Hydrodynamic Performance Prediction of Contra-Rotating Propellers

A growing interest has been devoted to the contra-rotating propellers （CRPs） due to their high propulsive efficiency, torque balance, low fuel consumption, low cavitations, low noise performance and low hull vibration. Compared with the single-screw system, it is more difficult for the open water performance prediction because forward and aft propellers interact with each other and generate a more complicated flow field around the CRPs system. The current work focuses on the open water performance prediction of contra-rotating propellers by RANS and sliding mesh method considering the effect of computational time step size and turbulence model. The validation study has been performed on two sets of contra-rotating propellers developed by David W Taylor Naval Ship R ＆ D center. Compared with the experimental data, it shows that RANS with sliding mesh method and SST k-ω turbulence model has a good precision in the open water performance prediction of contra-rotating propellers, and small time step size can improve the level of accuracy for CRPs with the same blade number of forward and aft propellers, while a relatively large time step size is a better choice for CRPs with different blade numbers.

Real-time multi-step prediction control for BP network with delay

Real time multi step prediction of BP network based on dynamical compensation of system characteristics is suggested by introducing the first and second derivatives of the system and network outputs into the network input layer, and real time multi step prediction control is proposed for the BP network with delay on the basis of the results of real time multi step prediction, to achieve the simulation of real time fuzzy control of the delayed time system.

Modified precise time step integration method of structural dynamic analysis

The precise time step integration method proposed for linear time-invariant homogeneous dynamic systems can provide precise numerical results that approach an exact solution at the integration points. However, difficulty arises when the algorithm is used for non-homogeneous dynamic systems, due to the inverse matrix calculation and the simulation accuracy of the applied loading. By combining the Gaussian quadrature method and state space theory with the calculation technique of matrix exponential function in the precise time step integration method, a new modified precise time step integration method （e.g., an algorithm with an arbitrary order of accuracy） is proposed. In the new method, no inverse matrix calculation or simulation of the applied loading is needed, and the computing efficiency is improved. In particular, the proposed method is independent of the quality of the matrix H. If the matrix H is singular or nearly singular, the advantage of the method is remarkable. The numerical stability of the proposed algorithm is discussed and a numerical example is given to demonstrate the validity and efficiency of the algorithm.

High order single step time delay compensation algorithm for structural active control

The optimal instantaneous high order single step algorithm for active control is first discussed and then, the n+1 time step controlling force vector of the instantaneous optimal algorithm is derived from way of n time state vector. An estimating algorithm, is developed from this to solve the problem of active control with time delay compensation. The estimating algorithm based on this high order single step β method (HSM) foundation, is proven by simulation and experiment analysis, to be a valid solution to problem of active control with time delay compensation.

On time-step in structural seismic response analysis under ground displacement/acceleration

There are two models in use today to analyze structural responses when subjected to earthquake ground motions, the Displacement Input Model （DIM） and the Acceleration Input Model （AIM）. The time steps used in direct integration methods for these models are analyzed to examine the suitability of DIM. Numerical results are presented and show that the time-step for DIM is about the same as for AIM, and achieves the same accuracy. This is contrary to previous research that reported that there are several sources of numerical errors associated with the direct application of earthquake displacement loading, and a very small time step is required to define the displacement record and to integrate the dynamic equilibrium equation. It is shown in this paper that DIM is as accurate and suitable as, if not more than, AIM for analyzing the response of a structure to uniformly distributed and spatially varying ground motions.

Splitting Based Scheme for Three-dimensional MHD with Dual Time Stepping

A new hybrid numerical scheme of combining an E-CUSP(Energy-Convective Upwind and Split Pressure) method for the fluid part and the Constrained Transport(CT) for the magnetic induction part is proposed.In order to avoid the occurrence of negative pressure in the reconstructed profiles and its updated value,a positivity preserving method is provided.Furthermore,the MHD equations are solved at each physical time step by advancing in pseudo time.The use of dual time stepping is beneficial in the computation since the use of dual time stepping allows the physical time step not to be limited by the corresponding values in the smallest cell and to be selected based on the numerical accuracy criterion.This newly established hybrid scheme combined with positivity preserving method and dual time technique has demonstrated the accurateness and robustness through numerical experiments of benchmark problems such as the 2D Orszag-Tang vortex problem and the3 D shock-cloud interaction problem.

Multiple time step molecular dynamics simulation for interaction between dislocations and grain boundaries

A multiple time step algorithm, called reversible reference system propagator algorithm, is introduced for the long time molecular dynamics simulation. In contrast to the conventional algorithms, the multiple time method has better convergence, stability and efficiency. The method is validated by simulating free relaxation and the hypervelocity impact of nano-clusters. The time efficiency of the multiple time step method enables us to investigate the long time interaction between lattice dislocations and low-angle grain boundaries.

RETHINKING TO FINITE DIFFERENCE TIME-STEP INTEGRATIONS

The numerical time step integrations of PDEs are mainly carried out by the finitedifference method to date. However,when the time step becomes longer, it causes theproblem of numerical instability,. The explicit integration schemes derived by the singlepoint precise integration method given in this paper are proved unconditionally stable.Comparisons between the schemes derived by the finite difference method and theschemes by the method employed in the present paper are made for diffusion andconvective-diffusion equations. Nunierical examples show the superiority of the singlepoint integration method.

Adaptive backstepping finite-time sliding mode control of spacecraft attitude tracking

This paper investigates the finite-time attitude tracking problem for rigid spacecraft. Two backstepping finite-time slid- ing mode control laws are proposed to solve this problem in the presence of inertia uncertainties and external disturbances. The first control scheme is developed by combining sliding mode con- trol with a backstepping technique to achieve fast and accurate tracking responses. To obtain higher tracking precision and relax the requirement of the upper bounds on the uncertainties, a se- cond control law is also designed by combining the second or- der sliding mode control and an adaptive backstepping technique. This control law provides complete compensation of uncertainty and disturbances. Although it assumes that the uncertainty and disturbances are bounded, the proposed control law does not require information about the bounds on the uncertainties and disturbances. Finite-time convergence of attitude tracking errors and the stability of the closed-loop system are ensured by the Lya- punov approach. Numerical simulations on attitude tracking control of spacecraft are provided to demonstrate the performance of the proposed controllers.

Multi-step-prediction of chaotic time series based on co-evolutionary recurrent neural network

This paper proposes a co-evolutionary recurrent neural network （CERNN） for the multi-step-prediction of chaotic time series, it estimates the proper parameters of phase space reconstruction and optimizes the structure of recurrent neural networks by coevolutionary strategy. The searching space was separated into two subspaces and the individuals are trained in a parallel computational procedure. It can dynamically combine the embedding method with the capability of recurrent neural network to incorporate past experience due to internal recurrence. The effectiveness of CERNN is evaluated by using three benchmark chaotic time series data sets： the Lorenz series, Mackey-Glass series and real-world sun spot series. The simulation results show that CERNN improves the performances of multi-step-prediction of chaotic time series.

RESIDENCE TIME DISTRIBUTION STUDIES WITH TRACER EXPERIMENTS:IMPULSE INJECTION VERSUS STEP CHANGE OF FEED

1 INTRODUCTIONThe popularly used axial dispersion model is mathematically expressed by aone-dimensional partial differential

Time Step Issue in Unit Hydrograph for Improving Runoff Prediction in Small Catchments

Unit hydrograph is a very practical tool in runoff prediction which has been used since decades ago and to date it remains useful. Unit hydrograph method is applied in Way Kuala Garuntang, an ungauged catchment in Lampung Province, Indonesia. To derive an observed unit hydrograph it requires rainfall and water level data with fine time scale which are obtained from automatic gauges. Observed unit hydrograph has an advantage that it is possible to derive it for various time steps including those with time step less than an hour. In order to get a more accurate unit hydrograph, it is necessary to derive a unit hydrograph with small time step for a small catchment such as those used in this study. The study area includes Way Kuala Garuntang and its tributaries, i.e. Way Simpur, Way Awi with areas are 60.52 km2, 3.691 km2, and 9.846 km2 respectively. The results of this study highlight the importance of time step selection on unit hydrograph, which are shown to have a significant impact on the resulting unit hydrograph’s variables such as peak discharge and time to peak.

TIME ACCURATE 2D NAVIER-STOKES CALCULATIONS WITH A DUAL-TIME STEPPING METHOD

With the cell vertex finite volume discretization in space and second order backward implicit discretization in time, 2D unsteady Navier Stokes equations are solved by a dual time stepping method to simulate compressible viscous flow around rigid airfoils in arbitrary unsteady motion. The selection of physical time step is not restricted by stability condition any more, and most of the successful acceleration techniques used in steady calculations can be implemented to increase the computation efficiency.

Influence of Initial Value of Transient Time Step on Numerical Simulation of Blow Molding Balloon

The correlation between the initial time value of transient iterative parameters and the blowing pressure in the numerical simulation process of blowing balloon is investigated by POLYFLOW. The results show that: 1) As the blow molding pressure increases, the boundary value of the iterative time step decreases rapidly at first and then slowly. At the end of the first step of iterative calculation for each boundary value, the balloon parison is in the mold core cavity. 2) If the initial time value of transient iterative parameters is smaller than the boundary value of the iterative time step, the balloon parison is still in the mold core cavity at the end of the first iteration. However, if the iterative calculation continues, the calculation process may be interrupted when the time step is smaller than the initial time value of the transient iterative parameters, which makes the blow molding simulation of balloon unable to continue. 3) It is suggested that the initial time value of transient iterative parameters is one order of magnitude smaller than the boundary value of the iterative time step to complete smoothly the simulation of blow molding balloon.

The Stable Explicit Time Stepping Analysis with a New Enrichment Scheme by XFEM

This paper focuses on the study of the stability of explicit time integration algorithm for dynamic problem by the Extended Finite Element Method(XFEM).A new enrichment scheme of crack tip is proposed within the framework of XFEM.Then the governing equations are derived and evolved into the discretized form.For dynamic problem,the lumped mass and the explicit time algorithm are applied.With different grid densities and different forms of Newmark scheme,the Dynamic Stress Intensity Factor(DSIF)is computed by using interaction integral approach to reflect the dynamic response.The effectiveness of the proposed scheme is demonstrated through the numerical examples,and the critical time stepping in different situations are listed and analyzed to illustrate the factors that affect stability.

The Stable Explicit Time Stepping Analysis with a New Enrichment Scheme by XFEM

This paper focuses on the study of the stability of explicit time integration algorithm for dynamic problem by the Extended Finite Element Method(XFEM).A new enrichment scheme of crack tip is proposed within the framework of XFEM.Then the governing equations are derived and evolved into the discretized form.For dynamic problem,the lumped mass and the explicit time algorithm are applied.With different grid densities and different forms of Newmark scheme,the Dynamic Stress Intensity Factor(DSIF)is computed by using interaction integral approach to reflect the dynamic response.The effectiveness of the proposed scheme is demonstrated through the numerical examples,and the critical time stepping in different situations are listed and analyzed to illustrate the factors that affect the numerical stability.

ENTROPY CONSISTENCY OF LARGE TIME STEP SCHEMES FOR ISENTROPIC EQUATIONS OF GAS DYNAMICS

In this paper, We show for isentropic equations of gas dynamics with adiabatic exponent gamma=3 that approximations of weak solutions generated by large time step Godunov's scheme or Glimm's scheme give entropy solution in the limit if Courant number is less than or equal to 1.

Random Timestepping Algorithm with Exponential Distribution for Pricing Various Structures of One-Sided Barrier Options

The exponentially-distributed random timestepping algorithm with boundary test is implemented to evaluate the prices of some variety of single one-sided barrier option contracts within the framework of Black-Scholes model, giving efficient estimation of their hitting times. It is numerically shown that this algorithm, as for the Brownian bridge technique, can improve the rate of weak convergence from order one-half for the standard Monte Carlo to order 1. The exponential timestepping algorithm, however, displays better results, for a given amount of CPU time, than the Brownian bridge technique as the step size becomes larger or the volatility grows up. This is due to the features of the exponential distribution which is more strongly peaked near the origin and has a higher kurtosis compared to the normal distribution, giving more stability of the exponential timestepping algorithm at large time steps and high levels of volatility.