High quality potassium hexatitanate whiskers were hydrothermally synthesized in one step under moderate temperature and pressure conditions. Effects of the titanium source and reaction conditions on the hydrothermal r...High quality potassium hexatitanate whiskers were hydrothermally synthesized in one step under moderate temperature and pressure conditions. Effects of the titanium source and reaction conditions on the hydrothermal reaction rate, product phase component, and morphology of whiskers were investigated. The results show that the reactivity of hydrated titania, anatase TiO2, and rutile TiO2 with KOH decreases in turn, and with hydrated titania as titanium source, it is difficult to obtain potassium hexatitanate whiskers with good morphology. In contrast, uniform potassium hexatitanate whiskers with a length of 10-20 μm and a diameter of 200-700 nm were obtained using anatase TiO2 as titanium source. The investigation demonstrates that the initial KOH concentration, annealing temperature and time, molar ratio of K2O/TiO2, etc. significantly affect the morphology of the as-synthesized whiskers. The optimized synthesis condition is as follows： anatase as a titanium source 10 wt.% KOH solution; annealing temperature and time of 300℃ and 5 h, respectively; K2O/TiO2 molar ratio of 5, etc. A rhombic potassium hexatitanate was prepared under the optimum condition and the whisker grew along the [110] direction. The reaction mechanism was discussed.展开更多
Metal clusters RCCo_3(CO)_9(R-H,C1,Br,CH_3,Ph) were prepared in 18.8-57.3% yields from the reaction of cobalt(Ⅱ)salt and RCX_a under mild PTC conditions(latm CO,25℃).The cobalt salt was reduced to Co(CO)_4 in the pr...Metal clusters RCCo_3(CO)_9(R-H,C1,Br,CH_3,Ph) were prepared in 18.8-57.3% yields from the reaction of cobalt(Ⅱ)salt and RCX_a under mild PTC conditions(latm CO,25℃).The cobalt salt was reduced to Co(CO)_4 in the presence of Na_3S_2O_4.展开更多
According to the amino acid sequence and codon preference of E. coli, the human interleukin-18（IL-18） gene was optimized to avoid the rare codons. The total length of the synthesized gene is 571 bp; 18 oligonucleoti...According to the amino acid sequence and codon preference of E. coli, the human interleukin-18（IL-18） gene was optimized to avoid the rare codons. The total length of the synthesized gene is 571 bp; 18 oligonucleotides, DNA fragments were designed and synthesized by the phosphoramidite four-step chemical method. The whole DNA sequence was synthesized by a one-step total gene synthesis method, and then inserted in pUC18 vector. Five positive clones identified by blue-white colony screening were sent to Shanghai Sangon Biological Engineering Technology and Service Co., Ltd. for sequencing. The sequencing result shows that one clone contained the complete correct gene in all the five positive clones.展开更多
The controllable synthesis of tantalate K1.9Na0.1Ta2O6·2H2O has been successfully achieved by a two-step technique,namely,the molten salt and hydrothermal methods,at a low temperature. By simply varying the KOH c...The controllable synthesis of tantalate K1.9Na0.1Ta2O6·2H2O has been successfully achieved by a two-step technique,namely,the molten salt and hydrothermal methods,at a low temperature. By simply varying the KOH concentration in the hydrothermal process,K1.9Na0.1Ta2O6·2H2O particles with spherical,cuboctahedral,and durian-like morphologies were synthesized. The photocatalytic activity of the obtained samples for the degradation of rhodamine B was studied under ultraviolet light,which indicates that the photocatalytic properties of the samples are highly dependent on their morphologies. The K1.9Na0.1Ta2O6·2H2O nanospheres,with rough surfaces and the highest specific surface area,exhibit the best performance. The present work provides a unique approach for the controlled synthesis of tantalate photocatalysts,which are difficult to achieve through other synthetic approaches.展开更多
Cd S/Mo S2,an extremely efficient photocatalyst,has been extensively used in hydrogen photoproduction and pollutant degradation.Cd S/Mo S2can be synthesized by a facile one-step hydrothermal process.However,the effect...Cd S/Mo S2,an extremely efficient photocatalyst,has been extensively used in hydrogen photoproduction and pollutant degradation.Cd S/Mo S2can be synthesized by a facile one-step hydrothermal process.However,the effect of the sulfur source on the synthesis of Cd S/Mo S2via one-step hydrothermal methods has seldom been investigated.We report herein a series of one-step hydrothermal preparations of Cd S/Mo S2using three different sulfur sources：thioacetamide,L-cysteine,and thiourea.The results revealed that the sulfur source strongly affected the crystallization,morphology,elemental composition and ultraviolet（UV）–visible-light-absorption ability of the Cd S/Mo S2.Among the investigated sulfur sources,thioacetamide provided the highest visible-light absorption ability for Cd S/Mo S2,with the smallest average particle size and largest surface area,resulting in the highest efficiency in Methylene Blue（MB）degradation.The photocatalytic activity of Cd S/Mo S2synthesized from the three sulfur sources can be arranged in the following order：thioacetamideL-cysteinethiourea.The reaction rate constants（k）for thioacetamide,L-cysteine,and thiourea were estimated to be 0.0197,0.0140,and 0.0084 min^（-1）,respectively.However,thioacetamide may be limited in practical application in terms of its price and toxicity,while L-cysteine is relatively economical,less toxic and exhibited good photocatalytic degradation performance toward MB.展开更多
Monocrystal LiMn_(0. 6)Fe_(0. 4)PO_4 cathode material was obtained via hydrothermal method at 180℃ for 10 h without any surfactant. The effects of hydrothermal time on the phase and morphology of the material were di...Monocrystal LiMn_(0. 6)Fe_(0. 4)PO_4 cathode material was obtained via hydrothermal method at 180℃ for 10 h without any surfactant. The effects of hydrothermal time on the phase and morphology of the material were discussed.By controlling the reaction solutions, the rodlike, flowerlike,and strawlike LiMn_(0.6)Fe_(0.4)PO_4 cathode materials were synthesized. Electrochemical performances show that the rodlike LiMn_(0. 6)Fe_(0. 4)PO_4 has the best electrochemical properties. The initial discharge capacity of the rodlike structure is 106.4 mAh·g^(-1), which is higher than those of flowerlike and strawlike materials.展开更多
文摘High quality potassium hexatitanate whiskers were hydrothermally synthesized in one step under moderate temperature and pressure conditions. Effects of the titanium source and reaction conditions on the hydrothermal reaction rate, product phase component, and morphology of whiskers were investigated. The results show that the reactivity of hydrated titania, anatase TiO2, and rutile TiO2 with KOH decreases in turn, and with hydrated titania as titanium source, it is difficult to obtain potassium hexatitanate whiskers with good morphology. In contrast, uniform potassium hexatitanate whiskers with a length of 10-20 μm and a diameter of 200-700 nm were obtained using anatase TiO2 as titanium source. The investigation demonstrates that the initial KOH concentration, annealing temperature and time, molar ratio of K2O/TiO2, etc. significantly affect the morphology of the as-synthesized whiskers. The optimized synthesis condition is as follows： anatase as a titanium source 10 wt.% KOH solution; annealing temperature and time of 300℃ and 5 h, respectively; K2O/TiO2 molar ratio of 5, etc. A rhombic potassium hexatitanate was prepared under the optimum condition and the whisker grew along the [110] direction. The reaction mechanism was discussed.
文摘Metal clusters RCCo_3(CO)_9(R-H,C1,Br,CH_3,Ph) were prepared in 18.8-57.3% yields from the reaction of cobalt(Ⅱ)salt and RCX_a under mild PTC conditions(latm CO,25℃).The cobalt salt was reduced to Co(CO)_4 in the presence of Na_3S_2O_4.
文摘According to the amino acid sequence and codon preference of E. coli, the human interleukin-18（IL-18） gene was optimized to avoid the rare codons. The total length of the synthesized gene is 571 bp; 18 oligonucleotides, DNA fragments were designed and synthesized by the phosphoramidite four-step chemical method. The whole DNA sequence was synthesized by a one-step total gene synthesis method, and then inserted in pUC18 vector. Five positive clones identified by blue-white colony screening were sent to Shanghai Sangon Biological Engineering Technology and Service Co., Ltd. for sequencing. The sequencing result shows that one clone contained the complete correct gene in all the five positive clones.
基金supported by the National Natural Science Foundation of China(U140319321473261+3 种基金41305112)the Excellent Youth Foundation of Xinjiang Uygur Autonomous Region(2013711004)the CAS "Light of West China" Program(YB201303)the CAS/SAFEA International Partnership Program for Creative Research Teams~~
文摘The controllable synthesis of tantalate K1.9Na0.1Ta2O6·2H2O has been successfully achieved by a two-step technique,namely,the molten salt and hydrothermal methods,at a low temperature. By simply varying the KOH concentration in the hydrothermal process,K1.9Na0.1Ta2O6·2H2O particles with spherical,cuboctahedral,and durian-like morphologies were synthesized. The photocatalytic activity of the obtained samples for the degradation of rhodamine B was studied under ultraviolet light,which indicates that the photocatalytic properties of the samples are highly dependent on their morphologies. The K1.9Na0.1Ta2O6·2H2O nanospheres,with rough surfaces and the highest specific surface area,exhibit the best performance. The present work provides a unique approach for the controlled synthesis of tantalate photocatalysts,which are difficult to achieve through other synthetic approaches.
基金supported by the National Natural Science Foundation of China (No. 51478431)a Science and TechnologyPlanning Project from the Science and Technology Department in Zhejiang Province (No. 2014C33028)funding as a Xinmiao Talent Project of Zhejiang Province (No. 2016R408074)
文摘Cd S/Mo S2,an extremely efficient photocatalyst,has been extensively used in hydrogen photoproduction and pollutant degradation.Cd S/Mo S2can be synthesized by a facile one-step hydrothermal process.However,the effect of the sulfur source on the synthesis of Cd S/Mo S2via one-step hydrothermal methods has seldom been investigated.We report herein a series of one-step hydrothermal preparations of Cd S/Mo S2using three different sulfur sources：thioacetamide,L-cysteine,and thiourea.The results revealed that the sulfur source strongly affected the crystallization,morphology,elemental composition and ultraviolet（UV）–visible-light-absorption ability of the Cd S/Mo S2.Among the investigated sulfur sources,thioacetamide provided the highest visible-light absorption ability for Cd S/Mo S2,with the smallest average particle size and largest surface area,resulting in the highest efficiency in Methylene Blue（MB）degradation.The photocatalytic activity of Cd S/Mo S2synthesized from the three sulfur sources can be arranged in the following order：thioacetamideL-cysteinethiourea.The reaction rate constants（k）for thioacetamide,L-cysteine,and thiourea were estimated to be 0.0197,0.0140,and 0.0084 min^（-1）,respectively.However,thioacetamide may be limited in practical application in terms of its price and toxicity,while L-cysteine is relatively economical,less toxic and exhibited good photocatalytic degradation performance toward MB.
基金financially supported by the National Natural Science Foundation of China (Nos. 21231005 and 51071087)the Major State Basic Research Development Program of China(Nos. 2011CB935900 and 2010CB631303)+2 种基金the Discipline Innovative Engineering Plan (B12015)the Research Fund for the Doctoral Program of Higher Education of China (No.20120031110001)the Tianjin Science & Technology Project (No. 10SYSYJC27600)
文摘Monocrystal LiMn_(0. 6)Fe_(0. 4)PO_4 cathode material was obtained via hydrothermal method at 180℃ for 10 h without any surfactant. The effects of hydrothermal time on the phase and morphology of the material were discussed.By controlling the reaction solutions, the rodlike, flowerlike,and strawlike LiMn_(0.6)Fe_(0.4)PO_4 cathode materials were synthesized. Electrochemical performances show that the rodlike LiMn_(0. 6)Fe_(0. 4)PO_4 has the best electrochemical properties. The initial discharge capacity of the rodlike structure is 106.4 mAh·g^(-1), which is higher than those of flowerlike and strawlike materials.
