One-step quantum dialogue

Quantum dialogue(QD)enables two communication parties to directly exchange secret messages simultaneously.In conventional QD protocols,photons need to transmit in the quantum channel for two rounds.In this paper,we propose a one-step QD protocol based on the hyperentanglement.With the help of the non-local hyperentanglement-assisted Bell state measurement(BSM),the photons only need to transmit in the quantum channel once.We prove that our one-step QD protocol is secure in theory and numerically simulate its secret message capacity under practical experimental condition.Compared with previous QD protocols,the one-step QD protocol can effectively simplify the experiment operations and reduce the message loss caused by the photon transmission loss.Meanwhile,the non-local hyperentanglement-assisted BSM has a success probability of 100%and is feasible with linear optical elements.Moreover,combined with the hyperentanglement heralded amplification and purification,our protocol is possible to realize long-distance one-step QD.

Study of the reaction mechanism for preparing powdered activated coke with SO_(2)adsorption capability via one-step rapid activation method under flue gas atmosphere

In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.

One-step green method to prepare progressive burning gun propellant through gradient denitration strategy

Gradiently denitrated gun propellant(GDGP)prepared by a“gradient denitration”strategy is obviously superior in progressive burning performance to the traditional deterred gun propellant.Currently,the preparation of GDGP employed a tedious two-step method involving organic solvents,which hinders the large-scale preparation of GDGP.In this paper,GDGP was successfully prepared via a novelty and environmentally friendly one-step method.The obtained samples were characterized by FT-IR,Raman,SEM and XPS.The results showed that the content of nitrate groups gradiently increased from the surface to the core in the surface layer of GDGP and the surface layer of GDGP exhibited a higher compaction than that of raw gun propellant,with a well-preserved nitrocellulose structure.The denitration process enabled the propellant surface with regressive energy density and good progressive burning performance,as confirmed by oxygen bomb and closed bomb test.At the same time,the effects of different solvents on the component loss of propellant were compared.The result showed that water caused the least component loss.Finally,the stability of GDGP was confirmed by methyl-violet test.This work not only provided environmentally friendly,simple and economic preparation of GDGP,but also confirmed the stability of GDGP prepared by this method.

Developing super-hydrophobic and corrosion-resistant coating on magnesium-lithium alloy via one-step hydrothermal processing

Formation of super-hydrophobic and corrosion-resistant coatings can provide significant corrosion protection to magnesium alloys.However,it remains a grand challenge to produce such coatings for magnesium-lithium alloys due to their high chemical reactivity.Herein,a one-step hydrothermal processing was developed using a stearic-acid-based precursor medium,which enables the hydrothermal conversion and the formation of low surface energy materials concurrently to produce the super-hydrophobic and corrosion-resistant coating.The multiscale microstructures with nanoscale stacks and microscale spheres on the surface,as well as the through-thickness stearates,lead to the super-hydrophobicity and excellent corrosion resistance of the obtained coating.

One-step ethylene separation from ternary C_(2) hydrocarbon mixture with a robust zirconium metal-organic framework

One-step separation of high-purity ethylene(C_(2)H_(4))from C_(2) hydrocarbon mixture is critical but challenging because of the very similar molecular sizes and physical properties of C_(2)H_(4),ethane(C_(2)H_(6)),and acetylene(C_(2)H_(2)).Herein,we report a robust zirconium metal-organic framework(MOF)Zr-TCA(H3TCA=4,4',4"-tricarboxytriphenylamine)with suitable pore size(0.6 nm×0.7 nm)and pore environment for direct C_(2)H_(4) purification from C_(2)H_(4)/C_(2)H_(2)/C_(2)H_(6) gas-mixture.Computational studies indicate that the abundant oxygen atoms and non-polar phenyl rings created favorable pore environments for the preferential binding of C_(2)H_(2) and C_(2)H_(6) over C_(2)H_(4).As a result,Zr-TCA exhibits not only high C_(2)H_(6)(2.28 mmol·g^(-1))and C_(2)H_(2)(2.78 mmol·g^(-1))adsorption capacity but also excellent C_(2)H_(6)/C_(2)H_(4)(2.72)and C_(2)H_(2)/C_(2)H_(4)(5.64)selectivity,surpassing most of one-step C_(2)H_(4) purification MOF materials.Dynamic breakthrough experiments confirm that Zr-TCA can produce high-purity C_(2)H_(4)(>99.9%)from a ternary gas mixture(1/9/90 C_(2)H_(2)/C_(2)H_(6)/C_(2)H_(4))in a single step with a high C_(2)H_(4) productivity of 5.61 L·kg^(-1).

One-step Eco-friendly Fabrication of Antibacterial Polyester Via On-line Amination Reaction by Melt Coextrusion

The work is dedicated to develop a one-step eco-friendly method to prepare antibacterial polyethylene terephthalate(PET).We report a one-step eco-friendly method to manufacture antibacterial PET via on-line amination reaction by melt coextrusion.Beside evenly mixing of poly(hexamethylene guanidine)(PHMG)and PET in the melt coextrusion procedure,the amination reaction also occurred between PHMG and PET under high temperature(230-270℃).The antibacterial ability of composite PET showed obvious PHMG concentration dependence,and antibacterial activity reached more than 99%when PHMG content was 2.5 wt%.Moreover,LIVE/DEAD fluorescence test further confirmed that the composite PET could kill bacteria quickly and efiectively(within 30 min);while negligible cytotoxicity was observed to HSF and HUVEC cells.Onestep eco-friendly fabrication of composite antibacterial PET was accomplished by on-line melt coextrusion.The composite antibacterial PET has potential use in multiple fields to combat with pathogenic including textiles,packaging materials,decoration materials and biomedical devices,etc.

Non-exposed endoscopic wall-inversion surgery with one-step nucleic acid amplification for early gastrointestinal tumors:Personal experience and literature review

BACKGROUND Laparoscopic and endoscopic cooperative surgery is a safe,organ-sparing surgery that achieves full-thickness resection with adequate margins.Recent studies have demonstrated the safety and efficacy of these procedures.However,these techniques are limited by the exposure of the tumor and mucosa to the peritoneal cavity,which could lead to viable cancer cell seeding and the spillage of gastric juice or enteric liquids into the peritoneal cavity.Non-exposed endoscopic wallinversion surgery(NEWS)is highly accurate in determining the resection margins to prevent intraperitoneal contamination because the tumor is inverted into the visceral lumen instead of the peritoneal cavity.Accurate intraoperative assessment of the nodal status could allow stratification of the extent of resection.One-step nucleic acid amplification(OSNA)can provide a rapid method of evaluating nodal tissue,whilst nearinfrared laparoscopy together with indocyanine green can identify relevant nodal tissue intraoperatively.AIM To determine the safety and feasibility of NEWS in early gastric and colon cancers and of adding rapid intraoperative lymph node(LN)assessment with OSNA.METHODS The patient-based experiential portion of our investigations was conducted at the General and Oncological Surgery Unit of the St.Giuseppe Moscati Hospital(Avellino,Italy).Patients with early-stage gastric or colon cancer(diagnosed via endoscopy,endoscopic ultrasound,and computed tomography)were included.All lesions were treated by NEWS procedure with intraoperative OSNA assay between January 2022 and October 2022.LNs were examined intraoperatively with OSNA and postoperatively with conventional histology.We analyzed patient demographics,lesion features,histopathological diagnoses,R0 resection(negative margins)status,adverse events,and follow-up results.Data were collected prospectively and analyzed retrospectively.RESULTS A total of 10 patients(5 males and 5 females)with an average age of 70.4±4.5 years(range:62-78 years)were enrolled in this study.Five patients were diagnosed with gastric cancer.The remaining 5 patients were diagnosed with early-stage colon cancer.The mean tumor diameter was 23.8±11.6 mm(range:15-36 mm).The NEWS procedure was successful in all cases.The mean procedure time was 111.5±10.7 min(range:80-145 min).The OSNA assay revealed no LN metastases in any patients.Histologically complete resection(R0)was achieved in 9 patients(90.0%).There was no recurrence during the follow-up period.CONCLUSION NEWS combined with sentinel LN biopsy and OSNA assay is an effective and safe technique for the removal of selected early gastric and colon cancers in which it is not possible to adopt conventional endoscopic resection techniques.This procedure allows clinicians to acquire additional information on the LN status intraoperatively.

Noether＇s theorem and one-step corrections method for holonomic system

In this paper, a new computational method for improving the accuracy of numerically computed solutions is introduced. The computational method is based on the one-step method and conserved quantities of holonomic systems are considered as kinematical constraints in this method.

One-step laparoscopic pancreatic necrosectomy verse surgical step-up approach for infected pancreatic necrosis:a case-control study

BACKGROUND:The surgical step-up approach often requires multiple debridements and might not be suitable for infected pancreatic necrosis(IPN)patients with various abscesses or no safe route for percutaneous catheter drainage(PCD).This case-control study aimed to investigate the safety and effectiveness of one-step laparoscopic pancreatic necrosectomy(LPN)in treating IPN.METHODS:This case-control study included IPN patients undergoing one-step LPN or surgical step-up in our center from January 2015 to December 2020.The short-term and long-term complications after surgery,length of hospital stay,and postoperative ICU stays in both groups were analyzed.Univariate and multivariate logistic regression analyses were performed to explore the risk factors of major complications or death.RESULTS:A total of 53 IPN patients underwent one-step LPN and 37 IPN patients underwent surgical step-up approach in this study.There was no significant difference in the incidence of death,major complications,new-onset diabetes,or new-onset pancreatic exocrine insufficiency between the two groups.However,the length of hospital stay in the one-step LPN group was significantly shorter than that in the surgical step-up group.Univariate regression analysis showed that the surgical approach(one-step/step-up)was not the risk factor for major complications or death.Multivariate logistic regression analysis indicated that computed tomography(CT)severity index,American Society of Anesthesiologists(ASA)class IV,and white blood cell(WBC)were the significant risk factors for major complications or death.CONCLUSION:One-step LPN is as safe and effective as the surgical step-up approach for treating IPN patients,and reduces total hospital stay.

One-step wet-spinning assembly of twisting-structured graphene/carbon nanotube fiber supercapacitor

Graphene fiber-based supercapacitors hold great promise as flexible energy-storage devices. However, simultaneously achieving high ion-transport ability in electrode and electrolyte layer, which is crucial for realizing the high electrochemical performance, still remains challenging. Here, a facile and effective strategy to solve the problem was proposed by developing a twisting-structured graphene/carbon nanotube(CNT) fiber supercapacitor via one-step wet-spinning process with customized multi-channel spinneret.The remarkable structure features of the resulting fiber supercapacitor with wrinkled and thin electrolyte layer, and well-developed porosity of fiber electrode favored the rapid infiltration and transport of electrolyte ions inside the electrode, as well as between electrode and electrolyte, thus boosting high specific capacitance of 187.6 mF cm^(-2) and energy density of 30.2 μWh cm^(-2), and featuring long cycling life(93%capacitance retention after 10,000 cycles) and excellent flexibility. Moreover, the specific capacitance and energy density could be further improved to 267.2 m F cm^(-2) and 66.8 μWh cm^(-2), respectively, when Mn O2 was incorporated into the fiber.

Preparation of CdSe/ZnSe Core-shell Nanocrystal in One-step Reaction

High-quality Zn-doped CdSe core-shell nanocrystals were successfully prepared by incorporating a stoichiometric amount of Zn precursor into the CdSe reaction system, in which the Se precursor was excess and an Se-rich surface was formed. By injecting different amounts of Zn precursor, the core-shell nanocrystals demonstrated by the emission spectra were formed. The obtained Zn-doped CdSe nanocrystals exhibit a photoluminescence efficiency from 30% to 85%, which is comparable to those for the reported CdSe/ZnS, CdSe/CdS in the literature. In particular, a shell ZnSe layer with different thicknesses of ZnSe can be formed in this experiment by only changing the amount of Zn precursor added, which is simple and effective.

ONE-STEP LEACHING OF SOME REFRACTORY GOLD CONCENTRATECONTAINING ARSENIC AND THEORY ANALYSIS

A new technology of one-step leaching of refractory gold concentrate containing arsenic and sulfur was studied and 96. 8% of gold was extracted in an hour by this technology. Themodynamic possibility of reactions of arsenopyrite. pyrite and gold with sodium hypochlorite in NaOH medium, and solution chemistry of H3AuO3 at different pH values were analyzed. The reason why the gold wrapped by FeAsS, FeS2 can be leached out rapidly by grnding of porcelain ball mill. is explained.

One-step Synthesis of ε-Caprolactam by the Liquid Phase Nitrosation of Cyclohexane over the Catalysts Containing CH_3COO^- or —COOH

ε-Caprolactam（CL or CPL） is one of the most important intermediates used in polymer industry for the production of several million tons of nylon-6 every year^[1]. All current commercial processes for the production of caprolactam are based on either benzene or tolueneI21. Caprolactam is synthesized by the Beckmann rearrangement of cyclohexanone oxime with fuming sulfuric acid or sulfuric acid as the reaction medium, and cyclohexanone oxime is produced by the reaction between cyclohexanone and hydro- xylamine（only one exception is the Toray PNC process）.

Fabrication of Al_2O_3-NaCl Composite Heat Storage Materials by One-step Synthesis Method

Thermal energy storage is an attractive option for effectiveness since it gives flexibility and reduces energy consumption and costs. New composite materials for storage and transformation of heat of NaCl-Al2O3composite materials were synthesized by one-step synthesis method. The chemical composition, morphology, structure, and thermal properties were investigated by XRD, EDS, SEM, and DSC. The results show that NaCl can be absorbed by Al2O3particle from 800 to 900 ℃ for Al2O3particle surface is rich active structure. The results also indicate that the leakage of NaCl when the phase change can be prevented by Al2O3particles and the enthalpy of phase change of NaCl-Al2O3material is 362 J/g. The composites have an excellent heat storage capacity. Therefore, this study contributes to one new thought and method to prepare high temperature heat storage material and this material can be applied in future thermal engineering.

One-step synthesis of graphitic-C_3N_4/ZnS composites for enhanced supercapacitor performance

A series of graphitic-C3N4/ZnS（g-C3N4/ZnS） supercapacitor electrode materials have been prepared via a one-step calcination process of zinc acetate/thiourea with different mass ratios under nitrogen atmosphere. The optimized g-C3N4/ZnS composite shows a highest specific capacitance of 497.7 F/g at 1 A/g and good cycling stability with capacitance retention of 80.4% at 5 A/g after 1000 cycles. Moreover, gC3N4/ZnS composites display an improved supercapacitor performance in terms of specific capacitance compared to the pure g-C3N4 and ZnS. In addition, our designed symmetric supercapacitor device based on g-C3N4/ZnS composite electrodes can exhibit an energy density of 10.4 Wh/kg at a power density of 187.3 W/kg. As a result, g-C3N4/ZnS composites are expected to be a prospective material for supercapacitors and other energy storage applications.

One-Step Multiplex PCR for Simultaneous Detection and Identification of Eight Medically Important <i>Candida</i>Species

Recently, the incidence of Candida infections has substantially increased. Conventional identification methods for Candida species are technically difficult to conduct and cannot accurately distinguish each species. The purpose of the present study was to design primers to identify and detect simultaneously eight medically important Candida species using one-step multiplex PCR. PCR primers were designed based on partial sequences of intergenic spacer (IGS) and internal transcribed spacer (ITS) genes of eight medically important Candida species. These primers were able to distinguish each Candida species and did not display cross-reactivity with representative Candida species other than the eight Candida species. Moreover, our developed one-step multiplex PCR method is accurate, specific, cost-effective, time-saving, and worked without requiring DNA extraction.

An Efficient One-step Methyl Esterification of Carboxylic Acid and Deacetylation of Alcohol under BF_3·OEt_2-MeOH

An efficient one-step methyl esterification of carboxylic acid and deacetylation of alcohol under BF3O·Et2-MeOH was developed.

Synthesis and Characterization of Triangular-pyramidal Bismuth Oxide via a One-step Chemical Precipitation Route

Triangular-pyramidal ω-Bi2O3 is successfully synthesized via a one-step wet-chemical method.XRD,SEM,and UV-vis have been employed to characterize the as-prepared samples.Structural characterization by XRD confirms the formation of triclinic ω-Bi2O3 with high purity.The well-defined flowerlike Bi2O3 structures consisted of many triangular-pyramids are formed.Preparative parameters,such as concentration of PEG 6000,have great effects on the morphology and the particle size.The obvious absorption edge for ω-Bi2O3 powder is located at about 493 nm,which corresponds to the optical band gap energy of2.73 eV.

One-step thermokeratoplasty for pain alleviating and pre-treatment of severe acute corneal hydrops in keratoconus

AIM:To observe the efficacy of simplified one-step thermokeratoplasty for the treatment of severe acute corneal hydrops in keratoconus.METHODS:In this retrospective,noncomparative clinical study,10 patients(10 eyes) with acute hydrops in keratoconus were treated with simplified one-step thermokeratoplasty.Pain,changes in the corneal curvature,thickness,and size and morphology of the Descemet membrane breaks were detected before and after surgery.Eight patients were successfully treated using modified deep anterior lamellar keratoplasty(DALK).Graft transparency,visual acuity,and immunological rejection were evaluated for 6 to 12mo.RESULTS:Pain and corneal oedema were promptly alleviated,and the intrastromal ruptures diminished within 3 to 6wk after thermokeratoplasty.At 3 to 6wk after corneal oedema was faded,Descemet membrane breaks and intrastromal ruptures were healed.Two patients did not undergo subsequent corneal transplantation after thermokeratoplasty.Eight patients underwent DALK successfully and safely after thermokeratoplasty,without corneal perforation.Central corneal opacity faded or disappeared within 6mo.The mean best-corrected visual acuity was increased to 20/30 at 12mo after DALK.No one was observed with any immune rejection.CONCLUSION:One-step thermokeratoplasty can successfully and efficiently accelerate the absorption of prominent corneal oedema in severe acute hydrops patients.This simple procedure with no complications can be performed in the emergency department by residents.This method can improve the safety of DALK and obtain good postoperative vision.Long-term management of acute corneal hydrops using simplified one-step thermokeratoplasty seems promising.

Heat Transfer Analysis During "One-Step" Directional Solidification Process for Giant Magnetostrictive Materials

By theoretical analysis of heat transfer during the "one-step" directional solidification process, the functional relation between the temperature in solid-liquid interface and its effect factor was studied. The thermal gradient in solid liquid interface and heat transfer coefficient between the samples and surroundings were also calculated. On the basis of the above analysis, some suggestions for improving the thermal gradient in solid-liquid interface were put forward. It will provide a theoretical instruction for preparing high performance giant magnetostrictive materials (GMM).