相对化One-Way函数的存在性

One- Way函数在计算复杂性和密码技术中均有重要的应用 .将 Grollmann和 Selman的结果推广到相对化和非一致复杂类的情形 ,证明了复杂类 UP/ poly,UP,P/ poly等之间的包含关系与强相对化 one- way函数、弱相对化 one-

A new group key management scheme based on keys tree, XOR operation and one-way function

By introducing XOR operation and one-way function chains to group key management schemes based on the keys tree, a new group key management scheme based on the keys tree, XOR operation and one-way function chains is proposed. Initialization, member adding and member evicting operations are introduced. The new scheme is compared with three other group key management schemes which are based on the keys tree： SKDC, LKH, and OFF. As far as transmission, computation and storage costs are concerned, the performance of the new group key management scheme is the best. The security problem of the new scheme is analyzed. This new scheme provides backward and forward security, i.e.. newly admitted group members cannot read previous multicast messages and evicted members cannot read future multicast messages, even with collusion by many arbitrarily evicted members.

Effect of the distributor plugging ways on fluidization quality and particle stratification in air dense medium fluidized bed

Gas-solid fluidized bed separation is a highly efficient and clean technique for coal separation,and can effectively remove ash and sulfur contained gangue minerals from coal.However,the fine coal plugging distributor often leads to uneven fluidization and affects the separation effect.In this paper,different plugging ways were designed to study their effects on the fluidization characteristics and particle mixing.It was found that when the plugging phenomenon occurs,the minimum fluidization velocity of the fluidized bed gradually decreases as the plugging area enlarges.The difference between the top and the bottom of the bed minimum fluidization velocity increases accordingly,and a“stagnation phenomenon”occurs in the bed.The standard deviation of pressure fluctuations at the top of the bed is smaller than that at the bottom of the bed,which is the opposite of normal conditions.As the area of the plugging increases,the dead zone on the side wall of the fluidized bed significantly increases.The size of the dead zone is rapid reducing at the initial stage.It was noticed that the stratification of the low-density products is particularly affected by plugging,whereas the stratification of high-density products is not obviously influenced by certain conditions.

Influences of Used Parameters of Screw Distributor upon Mixture Paving Segregation

The paving segregation of asphalt mixture was closely related to the structure size and using parameters for the screw distributor of paver,and the paving uniformity of the mixture was determined by the screw blade diameter,pitch,and the position of the mixture in the screw distributor.Through researching the kinematics of the mixture in the screw distributor,the mathematical model was established,and the mathematical model was related with structural parameters,used parameters and material parameters.Through the mathematical model,the various parameters on the screw distributor job performance were analyzed,and the unstable area,meta-stable area and stable area were determined.In the project,the full-scale test in actual project was conducted by using the AC25 mixture.By changing the using parameters compare the paving operations,the results show that,the reasonable parameter will greatly improve the uniformity of paving,and the surface proportion of structural depth of mixture decrease from the 2.13 to 1.60.

Accuracy analysis of the optimal separable approximation method of one-way wave migration

An approximation for the one-way wave operator takes the form of separated space and wave-number variables and makes it possible to use the FFT, which results in a great improvement in the computational efficiency. From the function approximation perspective, the OSA method shares the same separable approximation format to the one-way wave operator as other separable approximation methods but it is the only global function approximation among these methods. This leads to a difference in the phase error curve, impulse response, and migration result from other separable approximation methods. The difference is that the OSA method has higher accuracy, and the sensitivity to the velocity variation declines with increasing order.

Numerical Investigation of Constructal Distributors with Different Configurations

Seven distributors with different configurations are designed and optimized by constructal approach. Their flow distribution performance and energy dissipation are investigated and compared by computational fluid dynamics （CFD） simulation. The reliability of CFD simulation is verified by experiments on the distributor that has all distributing rectangle channels on a plate. The results show that the symmetry of the distributing channels has decisive influence on the performance of flow distribution. Increasing the generations of channel branching will improve the flow distribution uniformity, but on the other hand increase the energy dissipation. Among all the seven constructal distributors, the distributor that has dichotomy configuration, Y-type junctions and straight interconnecting channels, is recommended for its better flow distribution performance and less energy dissipation.

One-way wave equation seismic prestack forward modeling with irregular surfaces

Mathematical geophone （MG） and equal-time stacking （ETS） principles are used to implement seismic prestack forward modeling with irregular surfaces using the oneway acoustic wave-equation. This method receives seismic primary reflections from the subsurface using a set of virtual MGs. The receivers can be located anywhere on an irregular observing surface. Moreover, the ETS method utilizes the one-way acoustic wave equation to easily and quickly image and extrapolate seismic reflection data. The method is illustrated using high single-noise ratio common shot gathers computed by numerical forward modeling of two simple models, one with a flat surface and one with an irregular surface, and a complex normal fault model. A prestack depth migration method for irregular surface topography was used to reoroduce the normal fault model with high accuracy.

Design and analysis of logarithmic spiral type sprag one-way clutch

A complete mathematical model for logarithmic spiral type sprag one-way clutch design and analysis is given.It assumes that the motion of all clutch components can be expressed by a model of epicyclic gearing.It takes advantage of Hunt-Crossley contact impact theory to calculate the contact forces between sprags and races,and it can be used for optimization of design and comparison with other types of sprag clutches.A good deal of analysis shows that the parameters of the steady windup angle,the steady contact force,the natural frequency and natural cycle of clutch have nothing to do with the initial velocity of outer race,while the parameters of the maximum transient windup angle,the maximum transient impact force and the steady engagement time increase linearly in the mode of engaging operation of clutch.It is also shown that the strut angle has great influence on the dynamic engagement performance of clutch.The parameters of the steady windup angle,the maximum transient windup angle,the steady engaging time,the steady contact force,the maximum transient impact force and the natural cycle of clutch decrease linearly nearly with the inner strut angle,while the natural frequency of the system increases linearly with the inner strut angle.

Pressure-impulse diagram with multiple failure modes of one-way reinforced concrete slab under blast loading using SDOF method

Two loosely coupled single degree of freedom (SDOF) systems were used to model the flexural and direct shear responses of one-way reinforced concrete slabs subjected to explosive loading. Blast test results show that the SDOF systems are accurate in predicting the failure mode of the slab under blast loads by incorporating the effects of the strain rate effect caused by rapid load application. Based on different damage criteria, pressure-impulse (P-I) diagrams of the two failure modes were analyzed with the SDOF systems. The effects of span length, concrete strength, and reinforcement ratio of the slab on the P-I diagram were also investigated. Results indicate that a slab tends to fail in direct shear mode when it is of a smaller span length and tends to fail in flexure mode when it is of a larger span length. With the increase of the concrete strength or reinforced ratio, both the flexure and shear capacity increase. Based on numerical results, a simplified method and a semi analytical equation for deriving the P-I diagram are proposed for different failure modes and damage levels.

CFD Analysis of Gas Distributor in Packed Column ——Prediction of Gas Flow and Effect of Tower Internals Geometry Structure

Computational fluid dynamics (CFD) simulations were carried out on the gas flow patterns of twin-tangential annular deflector gas distributor in the absence of liquid flow in a packed column (6.4 m in diameter), and the gas flow field in the column was presented close to reality on the whole. Furthermore, after ame-(lioration) of this gas distributor frame, turbulence energy and turbulence energy dissipation rate were both decreased greatly.Simulation results showed that the flow pattern and the distribution of gas flow were strongly affected by the column bottom frame; the proper column bottom frame could decrease the flow pressure drop greatly. Multifold factors, such as the column bottom geometry structure and distributor structure which affects the distribution capacity, must be considered.

Analysis and Modeling of Wangqing Oil Shale Drying Characteristics in a Novel Fluidized Bed Dryer with Asynchronous Rotating Air Distributor

In order to replace the conventional distributor, a novel asynchronous rotating air distributor, which can optimize the drying ability of fluidized bed and strengthen the drying performance of oil shale particles, is creatively designed in this study. The rotating speed of the asynchronous rotating air distributor with an embedded center disk and an encircling disk is regulated to achieve the different air supply conditions. The impacts of different drying conditions on the drying characteristic of Wangqing oil shale particles are studied with the help of electronic scales. The dynamics of experimental data is analyzed with 9 common drying models. The results indicate that the particles distribution in fluidized bed can be improved and the drying time can be reduced by decreasing the rotating speed of the embedded center disk and increasing the rotating speed of the encircling disk. The drying process of oil shale particles involves a rising drying rate period, a constant drying rate period and a falling drying rate period. Regulating the air distributor rotating speed reasonably will accelerate the shift of particles from the rising drying rate period to the falling drying rate period directly. The two-term model fits properly the oil shale particles drying simulation among 9 drying models at different air supply conditions. Yet the air absorbed in the particles' pores is diffused along with the moisture evaporation, and a small amount of moisture remains on the wall of fluidized bed in each experiment, thus, the values of drying simulation are less than the experimental values.

Application of direct computing of one-way coupling technique in seismic analysis of concrete gravity dam

A dam-reservoir system subjected to an earthquake is a nonlinear system, because the fluid equations are always nonlinear regardless of the linear or nonlinear model used for the dam body. Therefore, transient analysis is necessary. In this study, dam-reservoir interaction during earthquake excitation was modeled by utilizing coupled finite element equations based on the Eulerian approach. Direct computing of the one-way coupling technique was used to solve the coupled equations. This technique is based on a simple assumption that the fluid hydrodynamic pressure is applied to the dam body while the deformation of the dam has no influence on the water field. Seismic response analysis of the Sonla concrete gravity dam constructed in Sonla Province, Vietnam was carried out as a verification example. The results of the methodology introduced are in close agreement with results of the iterative method and the solution procedure is found to be less time-consuming than that of the iterative method. This method is very convenient and can be easily implemented in finite element programs with fluid-structure interaction modules.

Cold Model Study and Commercial Test on Novel Vapor-Liquid Distributor of Hydroprocessing Reactor

A novel vapor-liquid distributor was developed on the basis of sufficient study on the existing distributors applied in hydroprocessing reactors. The cold model test data showed that the fluid distribution performance of the novel vapor-liquid distributor was evidently better than the traditional one. Com- mercial tests of the new distributor were carded out in the 300 kt/a gas oil hydrotreating reactor at SINOPEC Changling Branch Company, showing that the new vapor-liquid distributor could improve the fluid distribution, promote the hydrotreating efficiency and lead to better performance than the traditional one.

CFD Simulation of Orifice Flow in Orifice-type Liquid Distributor

In this study,a suitable CFD(computational fluid dynamics)model has been developed to investigate the influence of liquid height on the discharge coefficient of the orifice-type liquid distributors.The orifice flow in different diameters and liquid heights has been realized using the shear stress transport(SST)turbulence model and the Gamma Theta transition(GTT)model.In the ANSYS CFX software,two models are used in conjunction with an automatic wall treatment which allows for a smooth shift from a wall function(WF)to a low turbulent-Re near wall formulation(LTRW).The results of the models coupled with LTRW are closer to the experimental results compared with the models with WF,indicating that LTRW is more appropriate for the prediction of boundary layer characteristics of orifice flow.Simulation results show that the flow conditions of orifices change with the variation of liquid height.With respect to the turbulence in orifice,the SST model coupled with LTRW is recommended.However,with respect to the transition to turbulence in orifice with an increase in liquid height,the predictions of GTT model coupled with LTRW are superior to those obtained using other models.

Application of simple array method in one-way traffic synthetic asessment

One-Way Traffic synthetic assessing can not only determine the assessment method, but can also provide an opportunity for further study of road systems. Comparing three Road Traffic Planning methods, which are Value Analysis method, Simple Array method and Step Analysis method, this paper concludes that Simple Array method has one prominent merit, avoiding the complicated relationship of various factors and simplifying the complex problem. Therefore Simple Array method is firstly presented in this paper to be the assessing measure to assess the One-Way Traffic Planning project. Although this assessing method cannot wholly give way to man’s will, through consistently testing on qualitative factors and with the decision-making results of a multi-program, this method is still an effective method. Using an example of Harbin One-Way Traffic planning, with seven assessing indexes including economic benefit index, Simple Array method is applied to synthetically assessing the program. This fully reflects the general function of One-Way Traffic planning program and objectively evaluates the program. It also proves that, as the method of One-Way Traffic synthetic assessing, Simple Array method is rational and practical.

A parametric bootstrap approach for one-way classification model with skew-normal random effects

In this paper,several properties of one-way classification model with skew-normal random effects are obtained,such as moment generating function,density function and noncentral skew chi-square distribution,etc.Based on the EM algorithm,we discuss the maximum likelihood(ML)estimation of unknown parameters.For testing problem of fixed effect,a parametric bootstrap(PB)approach is developed.Finally,some simulation results on the Type I error rates and powers of the PB approach are obtained,which show that the PB approach provides satisfactory performances on the Type I error rates and powers,even for small samples.For illustration,our main results are applied to a real data problem.

Effect of Gas Distributor Structure on Fluidization Characteristics in a Gas-Solid Fluidized Bed

In the present paper,the experimental method and computational fluid dynamics(CFD)method were used to investigate the effect of gas distributors with different orifice sizes and orifice pitches on fluidization characteristics in a gas-solid fluidized bed.The Euler-Euler two fluid model(TFM)approach based on the kinetic theory of granular flow(KTGF)and the standard k-epsilon turbulence model was employed in the numerical simulation by using ANSYS Fluent 15.0.The results showed that the orifice size and the orifice pitch of gas distributor had a significant influence on the flow characteristics in the gas-solid fluidized bed.With a decreasing orifice size and orifice pitch of gas distributor having the same opening area,the distributor pressure drop,the initial bubble size,and the height of dead zone just above the distributor were decreased,and the bed pressure drop was increased more than that of the larger orifice size and orifice pitch of distributors,the distribution of solid volume fraction was also more homogeneous for the smaller orifice size.

Urban One-way Traffic Organization and Its Evaluation

One-way traffic organization is a direct, efficient and economic method to solve traffic congestion and expand traffie capacity. With its evolution, advantages and disadvantages introduced its setting conditions demonstrated. The general method and processes are summarized in planning for urban one-way streets project, viz. investigation, drawing out and evaluation of project, selecting of project and beneficial analysis. Fuzzy synthetical evaluation other fields is employed to evaluate the project. Its evaluation system and method is introduced and Delphi method is adopted to obtain evaluation index. Finally, taking Harbin city as an example, the application process of above-mentioned method is illuminated. Accordingly, it is proved that the method is exercisable.

ONE-WAY MULTIVARIATE REPEATED MEASUREMENTS ANALYSIS OF VARIANCE MODEL

The one-way multivariate repeated measurements analysis of variance (1-way MRM ANOVA) model for complete data and the sphericity test are studied.

One-way hash function based on hyper-chaotic cellular neural network

The design of an efficient one-way hash function with good performance is a hot spot in modern cryptography researches. In this paper, a hash function construction method based on cell neural network with hyper-chaos characteristics is proposed. First, the chaos sequence is gotten by iterating cellular neural network with Runge Kutta algorithm, and then the chaos sequence is iterated with the message. The hash code is obtained through the corre- sponding transform of the latter chaos sequence. Simulation and analysis demonstrate that the new method has the merit of convenience, high sensitivity to initial values, good hash performance, especially the strong stability.