Effect of surfactant frequently used in soil flushing on oxygen mass transfer in micro-nano-bubble aeration system

In-site soil flushing and aeration are the typical synergetic remediation technology for contaminated sites.The surfactant present in flushing solutions is bound to affect the aeration efficiency.The purpose of this study is to evaluate the effect of surfactant frequently used in soil flushing on the oxygen mass transfer in micro-nano-bubble(MNB)aeration system.Firstly,bio-surfactants and chemical surfactants were used to investigate their effects on Sauter mean diameter of bubble(dBS),gas holdup(ε),volumetric mass-transfer coefficient(kLa)and liquid-side mass-transfer coefficient(kL)in the MNB aeration system.Then,based upon the experimental results,the Sardeing's and Frossling's models were modified to describe the effect of surfactant on kL in the MNB aeration.The results showed that,for the twenty aqueous surfactant solutions,with the increase in surfactant concentration,the value of dBS,kLa and kL decreased,while the value ofεand gas-liquid interfacial area(a)increased.These phenomena were mainly attributed to the synergistic effects of immobile bubble surface and the suppression of coalescence in the surfactant solutions.In addition,with the presence of electric charge,MNBs in anionic surfactant solutions were smaller and higher in number than in non-ionic surfactant solutions.Furthermore,the accumulation of surfactant on the gas-liquid interface was more conspicuous for small MNB,so the reduction of kL in anionic surfactant solutions was larger than that in non-ionic surfactant solutions.Besides,the modified Frossling's model predicted the effect of surfactant on kL in MNB aeration system with reasonable accuracy.

Analysis and Prospect of Waste Heat Utilization from Blast Furnace Slag Flushing

Estimating the residual heat of blast furnace slag flushing in China,classifying and introducing the current proposed methods of slag flushing waste heat utilization,and listing existing cases.In order to better save energy and water in the slag flushing process of blast furnaces,an ideal comprehensive cascade utilization system scheme for annual recovery of waste heat is proposed.Based on the measured waste heat data of a steel plant,design calculations are carried out to further analyze the economic feasibility of the new scheme and provide reference for its promotion and application.

Stress-unloading and gas migration improvement mechanism in the soft and hard interbedded coal seam using directional hydraulic flushing technology

To enhance gas drainage in the soft and hard interbedded(SHI)coal seam,it’s necessary to unload the insitu stress and improve its gas migration performance.In this research,a directional hydraulic flushing(DHF)technology was carried out.The stress-unloading and gas migration improvement mechanism was analyzed through numerical simulation,and systematic engineering tests were conducted to verify the gas drainage effect.The results show that the improvement of gas migration performance in the SHI coal seam is caused by a combined effect of seepage-improving and diffusion-improving.After DHF,stress-unloading and plastic failure could be achieved both in the soft coal(SC)sublayer and in the hard coal(HC)sublayer.However,the gas diffusion capacity improves significantly in the SC sublayer,while the gas seepage capacity improves notably in the HC sublayer.Meanwhile,the stress-unloading and gas migration improvement effect improves with the flushing radius and the thickness of the SC sublayer.Besides,after adopting the DHF technology,the gas drainage effect improved markedly.The borehole number dropped by 49%,the gas drainage ratio increased from 26.0%to 48.2%,and the average coal roadway excavation speed increased from 2.4 to 5.6 m/d.

Vancomycin flushing syndrome in orthopaedic practice:A case report

BACKGROUND Vancomycin flushing syndrome(VFS),also known as red man syndrome,is an allergic reaction to vancomycin.It typically presents as a rash on the face,neck,and upper torso after intravenous administration of vancomycin.VFS is blamed on rapid intravenous infusion of vancomycin during management and rarely happens after local use.A review of the literature showed that in the last 23 years,4 such cases have been reported.Here,we add another case of VFS developed after slow local absorption of vancomycin in cement beads.CASE SUMMARY A 44-year-old male with a known case of hypertension,no history of allergies to medications,and a history of chronic osteomyelitis of the right tibia with discharging sinus over the anterolateral aspect of the leg.The pus culture grew Staphylococcus aureus,which was sensitive to clindamycin and vancomycin.The patient underwent irrigation and debridement with the placement of vancomycin cement beads made from 4 g of vancomycin powder and 40 g of polymethyl methacrylate.Three hours postoperatively,the patient developed a pruritic,erythematous,macular rash predominantly on his face,neck,chest,and lower extremities and to a lesser extent his upper extremities.A diagnosis of VFS was made and was successfully treated with cetirizine(10 mg,oral)and methylprednisolone sodium succinate(125 mg,intravenous).The patient continued to have itching with a facial rash for 12 h with gradual improvement.A decision was made to not remove the beads as the patient continued to improve.Gradually,the rash disappeared after 96 h with no further sequela.CONCLUSION VFS can occur not only after rapid intravenous injection of vancomycin but also with local release,as in our case.As orthopaedic surgeons routinely use vancomycin with polymethyl methacrylate in chronic osteomyelitis and revision arthroplasty,they should be aware of such a complication occurring.

Design and Fluid-Dynamic Analysis of a Flushing Nozzle for Drilling Applications

The actuator is a key component of the creaming tool in drilling applications.Its jet performances determine the effective reaming efficiency.In this work,a new selective reaming tool is proposed and the RNG k-εturbulence model is used to calculate its internal and externalflowfields.In particular,special attention is paid to the design of theflushing nozzle.The results show that the jet originating from theflushing nozzle has a significant influence on rock cutting and blade cooling effects.In turn,the jet performances depend on geometric structure of the creaming actuator.In this framework,a conical-cylindrical nozzle with a diameter of 7 mm is initially considered as a basis to implement a strategy to optimize the structural parameters of the reaming actuator,and improve the related side tracking reconstruction technology.

基于flushing time的春季水库优化调度可行性研究

针对三峡水库支流库湾春季水华问题,通过建立三维水动力模型,探讨了利用调峰调度和潮汐式调度促进干支流水体交换的可行性。研究表明,当4月水库实施调峰调度时,整个库湾水体的flushing time较常规调度有所缩短,尤其是库湾上游至中上游区域;当5月水库开始实施潮汐式调度时,水体体积较大的库湾下游区域的flushing time较常规调度方案有所缩短。可见,两种水库优化调度方案对增大干支流水体交换均具有可行性。当水库实施调峰调度和潮汐式调度联合调度时,整个库湾水体的平均flushing time较常规调度方案有不同程度的缩短,表明该联合调度方案更能促进干支流水体的交换。研究成果可为支流库湾水环境问题的防治提供借鉴。

Tidal Flushing Time of Marine Fish Culture Zones in Hong Kong

Accurate determination of flushing time is crucial for maintaining sustainable production in fish culture zones （FCZs）, as it represents the physical self-purification capability via tidal exchange with clean water in the outer sea. However, owing to the temporal and spatial complexity of the coastal flushing process, existing methods for determining flushing time may not be generally applicable. In this paper, a systematic method for determining the flushing time in FCZs is presented, in which bathymetry, runoff, tidal range and stratification are properly accounted for. We determine the flushing time via numerical tracer experiments, using robust 3D hydrodynamic and mass transport models. For FCZs located in sheltered and land-locked tidal inlets, the system boundary can be naturally defined at the connection with the open sea. For FCZs located in open＇waters, hydrodynamic tracking is first used to assess the extent of tidal excursion and thus delimit the initial boundary between clean water and polluted water. This general method is applied to all designated marine FCZs in Hong Kong for both the dry and wet seasons, including 20 sheltered FCZs （in semi-enclosed waters of Tolo Harbour, Mirs Bay, and Port Shelter） and 6 FCZs in open waters. Our results show that flushing time is the longest in inner Port Shelter （about 40 days in dry season）, and the shortest for the FCZs in open waters （less than one week in dry season）. In addition, the flushing time in dry season is commonly longer than that in wet season： 20%~40% for most well-sheltered FCZs; 2.6-4 times for the others. Our results indicate a positive correlation between the flushing time and distance to open boundary, supporting the view that the flushing time of a FCZ is closely related to its location. This study provides a solid basis for mariculture management such as the determination of carrying capacity of FCZs.

A retrospective observational study on maintenance and complications of totally implantable venous access ports in 563 patients:Prolonged versus short flushing intervals

Objectives:To assess whether the extension of the flushing interval will increase risks of complications associated with totally implantable venous access port(TIVAP)in the off-treatment period.Methods:A retrospective single-center observational study was performed.Patients with a TIVAP in the off-treatment period that underwent regular flushing in our clinic were included.Data concerning patients and their TIVAPs were recorded.Patient baseline characteristics and TIVAP-related complications were analyzed.Continuous variables were analyzed by ANOVA or the Kruskal-Wallis H test.To compare the occurrence of TIVAP-related complications,the chi-square test was used;if needed,Fisher’s exact test was used.Results:Totally 607 patients were reviewed,and 563 patients were finally included.Thirteen complications were recorded,including 11 cases of catheter occlusion(1.95%),one case of port cannula rotation(0.18%),and one case of catheter tip malposition(0.18%).No device-related infection or venous thrombosis was recorded.Among these patients,the average flushing interval was 35.27±13.09 days.Patients were divided into three groups according to the flushing interval:every 28 days or less(Group 1,n=133);every 29-44 days(Group 2,n=350);and every 45 days or more(Group 3,n=80).No significant difference in catheter-related complications was found among the three groups(P>0.05).Conclusions:In the TIVAP off-treatment period,patients without any history of TIVAP-related complications during approximately one year can attempt to prolong the flushing interval to more than 4 weeks;we further suggest that 5-6 weeks may be an appropriate option for these patients.

Effect of drip irrigation method, nitrogen source, and flushing schedule on emitter clogging

Field experiments were carried out at the National Research Center farm, Nubaria area, Behura Governorate, Egypt, to study the effect of nitrogen source, flushing schedule and irrigation method on emitter clogging. Peanut Giza 5 variety (Arachishy pogaea L.) was planted in sandy soil during two successive growing seasons (2010-2011) in the 1st week of May and harvested after 130 days. Treatments used are: 1) two irrigation methods: surface drip irrigation and sub-surface drip irrigation (SDI;SSDI), 2) nitrogen source (NS):NH4NO3, (NH4)2SO4 and Ca(NO3)2 (NS1, NS2 and NS3) and 3) flushing number (FL) 0, 1 and 4 (FL1, FL2;FL3). The experiments design was split-split plot and three replicates were used. Data obtained were subjected to statistical analysis. The main effects of treatments used on clogging per cent could be written the following ascending orders: SDI 3 2 1, NS1 2 3. Concerning the 1st interaction the following ascending orders denote their effects on clogging percent: SDI × FL3 2 1, SDI × NS1 2 3, SSDI × FL3 2 1, SSDI × NS1 2 3, FL1 × NS1 1 × NS2 1 × NS3, FL2 × NS1 2 × NS2 2 × NS3 and FL3 × NS1 3 × NS2 3 × NS3. The differences between any two treatments and/or any two interactions in clogging percent were significant at the 5% level. The effect of the 2nd interaction on clogging percent was significant at the 5% level. The maximum value of clogging (20.18%) and the lowest one (3.9%) were archived in the interactions: SSDI × FL1 × NS3 and SDI × FL3 × NS1, respectively.

Study on the Effects of FCu-IUD and FICu-IUD on Matrix metalloproteinases in Human Uterine Flushing and Endometrium

The activity of matrix metalloproteinases (MMPs) in the uterine flushing and endometrial tissue of normal adult women wearing FCu IUD (fixed Cu IUD) or FICu IUD (indomethacin releasing FCu IUD) was observed by using zymography on SDS PAGE containing gelatin. The results showed that the activity and kinds of MMPs in FCu IUD group were increased significantly as compared with themselves before being inserted FCu IUD. However, compared with the FCu IUD group, the activity of some kinds of MMPs in the FICu IUD group was decreased significantly. These data suggest that IUD can enhance the activity of MMPs in human endometrium, intermediated by prostaglandins, and MMPs may have relation to IUD induced menorrhagia and indomethacin reduces IUD induced menorrhagia by partly inhibiting MMPs synthesis.

Sustainable Application of a Novel Water Cycle Using Seawater for Toilet Flushing

Global water security is a severe issue that threatens human health and well-being. Finding sustainable alternative water resources has become a matter of great urgency. For coastal urban areas, desalinated seawater could serve as a freshwater supply. However, since 20%-30% of the water supply is used for flushing waste from the city, seawater with simple treatment could also partly replace the use of freshwater. In this work, the freshwater saving potential and environmental impacts of the urban water system （water-wastewater closed loop） adopting seawater desalination, seawater for toilet flushing （SWTF）, or reclaimed water for toilet flushing （RWTF） are compared with those of a conventional freshwater system, through a life-cycle assessment and sensitivity analysis. The potential applications of these processes are also assessed. The results support the environmental sustainability of the SWTF approach, but its potential application depends on the coastal distance and effective population density of a city. Developed coastal cities with an effective population density exceeding 3000 persons.km-2 and located less than 30 km from the seashore （for the main pipe supplying seawater to the city） would benefit from applying SWTF, regardless of other impact parameters. By further applying the sulfate reduction, autotrophic denitrification, and nitrification integrated （SANI） process for wastewater treatment, the maximum distance from the seashore can be extended to 60 km. Considering that most modern urbanized cities fulfill these criteria, the next generation of water supply systems could consist of a freshwater supply coupled with a seawater supply for sustainable urban development.

Enhancing diamond drilling performance by the addition of non-ionic polymer to the flushing media

Drilling is a most important and crucial operation in the excavation industries.With the objective of looking into the enhancement of diamond drilling performance detailed laboratory investigations were carried out on phosphate rock.The effect of Poly（Ethylene Oxide）（PEO） added to the drilling water was studied by varying machine parameters and PEO concentration.The responses were rate of penetration and torque at the bit rock interface.Slake durability tests were also performed to understand the slaking behavior of phosphate rock in PEO solutions.

Sedimentological and Chemical Processes During Flushing Tests at Iffezheim Barrage(River Rhine)

This paper analyzes the situation at the Iffezheim barrage along the fiver Rhine.Since the start of operation in 1977 several million cubic meters of very fine sediment have been deposited in the reservoir.Be- cause of stability problems and reduced safety in the event of flooding,an extraction of the material is neces- sary.Chemical assays showed a high concentration of HCB.Therefore flushing without any additional measures is not appropriate.In order to leam more about the morphological and chemical in...

Flush by Unit在哥伦比亚Capella油田的应用

Capella油田是哥伦比亚南部重要的稠油油田,目前处于开发生产阶段,为了油田的稳产增产,需频繁对油井进行干预。Flush by Unit具有操作简单、移动高效、作业时间缩短、安全事故少等优点,作为试点引入了Flush by Unit为该油田的浅井提供修井服务,以降低桶油成本。本文介绍了Flush by Unit的结构组成、使用范围、现场使用效果,与传统修井机相比,可以大幅降低作业时间和成本,为后续规模使用Flush by Unit进行常规修井提供了依据,也为油田的增产稳产带来了机遇。

The applicability of soil flushing technology in a metallurgical plant

Soil flushing technology is an ＇in situ＇ remediation technique involving the injection of a liquid solution. Applications of the soil flushing technique depend on the leachability of the pollutants and the environmental compatibility and total volumes of the solutions used. Therefore, experiments should consider these aspects by simulating the real phenomenon and using the most suitable reagents for the leachability of the different mineralogical forms present. Thirty- one laboratory tests were carried out （in batch and becker） to the complete exhaustion of the leaching capacity according to pH measurements. The reaction kinetics were studied by producing more than 300 solution samples during which the principal heavy metal concentrations, pH and Eh were measured. Leaching solutions containing various concentrations of hydrochloric, sulphuric, nitric and acetic acids were used. Mercury was leached using potassium iodide and acetic acid （pH 2）. Analytes such as arsenic, cadmium, mercury, lead, selenium and zinc proved to be leachable in the investigated soil layer. However, high removal efficiencies could be obtained using different typological solutions, concentrations and volumes. The paper discusses the applicability of the soil flushing technique for different heavy metal contents and pH conditions of the flushing solution.

Using Condensed Water of Air Conditioners for Toilet Flushing： A Case Study in Brazil

Within the concept of sustainable construction, with sensible and conscious use of finite natural resources, every effort to save and reuse raw-materials is considered an important step to be adopted in buildings, from project, implantation and construction to operation and maintenance throughout their lifecycle. This study aims at showing the application of a system that reuses condensed water drained from air-conditioner evaporators （which are usually disposed of）, and a plan to use this water for toilet flushing, reducing consumption of treated water bought from water companies. The authors verified that each air-conditioner specified in the project of a commercial building--used as reference here--produces 4.8 L of water per hour of operation. This result in a daily accumulated volume of 4,290 L, which represents a significant part of the amount needed to supply all the toilets in the building. A water capture system located at a strategic intermediate floor would be able to store this water and pump it into a special reservoir on the roof of the building, to be distributed into toilet flush pipes. By applying this technology, the authors seek to considerably reduce the expected treated water consumption and consequently decrease water bill costs.

Effect of vacuum sealing drainage combined with intermittent insulin flushing on expression of inflammatory factors and apoptosis factors in diabetic lower limb ulcer wound

Objective: To discuss the effect of vacuum sealing drainage combined with intermittent insulin flushing on the expression of inflammatory factors and apoptosis factors in diabetic lower limb ulcer wound. Methods: A total of 48 patients with diabetic lower limb ulcer who were treated in the Endocrine Department of the hospital between January 2016 and January 2017 were divided into the control group and research group by random number table, 24 cases in each group. Control group received vacuum sealing drainage, and research group received vacuum sealing drainage combined with intermittent insulin flushing. The differences in the expression of inflammatory factors and apoptosis genes in the wound exudate were compared between the two groups before and after treatment. Results: Before treatment, the differences in the inflammatory factor contents and apoptsis gene expression in wound exudate were not statistically significant between the two groups of patients. After treatment, inflammatory factors IL-6, IL-1β, TNF-α, CRP, VCAM-1 and FGF2 contents in wound exudate of research group were lower than those of control group;apoptosis gene Bcl-2 mRNA expression in wound exudate of research group was higher than that of control group while Bax, p53 and Fas mRNA expression were lower than those of control group. Conclusions: Vacuum sealing drainage combined with intermittent insulin flushing can effectively reduce the local inflammatory response and promote the granulation cell proliferation in wound of patients with diabetic lower limb ulcer.

Controlling stationary one-way steering in a three-level atomic ensemble

We propose a scheme for establishing the stationary one-way quantum steering in a three-level Λ-type atomic ensemble. In our system, the cavity modes are generated from two atomic dipole-allowed transitions, which are in turn driven by two external classical fields. The atomic ensemble can act as an engineered reservoir to put two cavity modes into a squeezed state by two Bogoliubov dissipation pathways. When the damping rates of the two cavity modes are different,the steady-state one-way quantum steering of the intracavity and output fields is presented by adjusting the normalized detuning. The physical mechanism is analyzed based on a dressed state representation and Bogoliubov mode transformation.The achieved optical one-way quantum steering scheme has potential applications in quantum secret information sharing protocols.

Quantification of Phases in Lahore (Pakistan) Airborne Particulates by Matrix-Flushing Method

The mass concentrations of eighteen airborne samples collected from Lahore (Pakistan) are found in the range from 595 to 3027μg/m3with average value of 1130 μg/m3. Most of these values are normal and as reported in the literature for other parts of the world. The major phases identified in the samples by the X-ray powder diffraction technique are Albite (Anorthite), Calcite, Clinochlore (Chlorite), Gypsum, Illite, Quartz and Talc which have also been reported by other researchers to be present in the airborne particulates of other world locations. The average weight percentages of the phases (minerals) in the samples are respectively 15.5, 10.6, 23.7, 2.4, 19.1, 20.2, and 8.5. Some of the elements (e.g., boron, cadmium, lithium, manganese, titanium, and zinc) quantified in two samples determined using a spark-source mass spectrometer appear also to derive their origin from man-made activities. However no compound synthesized in the atmosphere is detected by the X-ray diffraction method.

钻井利器的故事之“护壁堵漏材料”

近年来,作为入地最为关键手段的钻探所面临的地层越来越复杂,钻孔垮塌、掉块、缩径和超径等事故发生概率增加,严重制约了钻探工程质量与效率的提升。护壁堵漏材料是钻探工程不可或缺的关键性工程材料,护壁堵漏技术则是保证钻进工作安全、快速以及持续进行的重要技术环节,是复杂地层钻孔处理的主要内容。本文从科普的角度介绍了护壁堵漏材料的基本概念与组成、冲洗液护壁堵漏作用、水泥基材料护壁堵漏作用、护壁堵漏材料的进一步发展空间等,以期加深对护壁堵漏材料的认识,促进新型护壁堵漏材料的研发和应用。