Pure State Feedback Switching Control Based on the Online Estimated State for Stochastic Open Quantum Systems

For the n-qubit stochastic open quantum systems,based on the Lyapunov stability theorem and LaSalle’s invariant set principle,a pure state switching control based on on-line estimated state feedback(short for OQST-SFC)is proposed to realize the state transition the pure state of the target state including eigenstate and superposition state.The proposed switching control consists of a constant control and a control law designed based on the Lyapunov method,in which the Lyapunov function is the state distance of the system.The constant control is used to drive the system state from an initial state to the convergence domain only containing the target state,and a Lyapunov-based control is used to make the state enter the convergence domain and then continue to converge to the target state.At the same time,the continuous weak measurement of quantum system and the quantum state tomography method based on the on-line alternating direction multiplier(QST-OADM)are used to obtain the system information and estimate the quantum state which is used as the input of the quantum system controller.Then,the pure state feedback switching control method based on the on-line estimated state feedback is realized in an n-qubit stochastic open quantum system.The complete derivation process of n-qubit QST-OADM algorithm is given;Through strict theoretical proof and analysis,the convergence conditions to ensure any initial state of the quantum system to converge the target pure state are given.The proposed control method is applied to a 2-qubit stochastic open quantum system for numerical simulation experiments.Four possible different position cases between the initial estimated state and that of the controlled system are studied and discussed,and the performances of the state transition under the corresponding cases are analyzed.

Einstein-Podolsky-Rosen Steering and Nonlocality in Open Quantum Systems

We investigate the dynamical behavior of quantum steering (QS), Bell nonlocality, and entanglement in open quantum systems. We focus on a two-qubit system evolving within the framework of Kossakowski-type quantum dynamical semigroups. Our findings reveal that the measures of quantumness for the asymptotic states rely on the primary parameter of the quantum model. Furthermore, control over these measures can be achieved through a careful selection of these parameters. Our analysis encompasses various cases, including Bell states, Werner states, and Horodecki states, demonstrating that the asymptotic states can exhibit steering, entanglement, and Bell nonlocality. Additionally, we find that these three quantum measures of correlations can withstand the influence of the environment, maintaining their properties even over extended periods.

The Research on Open Sharing of Higher Education Park Based on Intelligent Security System

The intelligent security system is a series of systems that use modern information technology means such as artificial intelligence, cloud computing, big data, face recognition to carry out comprehensive monitoring, early warning, prevention and control, disposal, etc, for security protection. It is the development trend of security system in the future, and it is also the basis for open sharing between higher education parks and universities. By using content analysis, unstructured interviews and other research methods, this paper deeply studies the feasibility and basic ideas of the construction of intelligent security system in Shahe Higher Education Park, and forms basic experience and typical practices through the project construction, which further promotes the more intelligent, standardized and scientific safety management in colleges and universities. It really provides an important theoretical basis and practical guidance for the opening and sharing between higher education parks and universities.

Web service based spatial forest information system using an open source software approach

For technical and other reasons there is a dilemma that data providers cannot find an appropriate way to redistribute spatial forest data and data users who need spatial data cannot access and integrate available forest resources information. To overcome this dilemma, this paper proposed a spatial forest information system based on Web service using an open source software approach. With Web service based architecture, the system can enable interoperability, integrate Web services from other application servers, reuse codes, and shorten the development time and cost. At the same time, it is possible to extend the local system to a regional or national spatial forest information system. The growth of Open Source Software （OSS） provides an alternative choice to proprietary software for operating systems, web servers, Web-based GIS applications and database management systems. Using open source software to develop spatial forest information systems can greatly reduce the cost while providing high performance and sharing spatial forest information. We chose open source software to build a prototype system for Xixia County, Henan Province, China. By integrating OSS packages Deegree and UMN MapServer which are compliant to the OGC open specifications, the prototype system enables users to access spatial forest information and travelling information of Xixia County which come from two different data servers via a standard Web browser and promotes spatial forest information sharing.

基于Open L—System的植物生长模拟研究

简述了OpenL-系统的基本原理,并基于OpenL-系统对草本植物的形态进行了模拟。在模拟过程中,对植物的分枝结构,叶片的分别,生长方向进行控制,并根据植物生长过程中其形态特征与环境信息之间的动态交互过程,构建了环境模型,实现了植物与环境并发过程的模拟研究并模拟了部分环境因素对植物生长过程形态结构的影响。

Open multilevel hierarchic intelligent control system for eco-industrial system

In allusion to the characteristics of the open complex giant system, an open multilevel hierarchic intelligent control system is established for the eco-industrial system. With the idea of the open engineering system, using the hall for workshop of metasynthetic engineering （HWME）, intelligent control techniques, the expert system and the design of experiments are integrated within the framework of the nonlinear multiobjective decision support system to develop a robust, top-level design specification so as to make the system have the quality of adaptive control, self-organizing, self-learning and robustness. Finally, an illustrative example is given to clarify the effectiveness of the method.

Realization Methodology of a 5-axis Spline Interpolator in an Open CNC System

By making use of the advantages of non-uniform rational B-spline （NURBS） curves to represent spatial curves, an instruction format with double NURBS curves suitable for 5-axis coordinated real-time interpolation is presented to replace the current 5-axis coordinated linear interpolation method defective in low-speed, low-accuracy and enormous numerical control （NC） files in sculptured surface machining. A generation procedure of the NC files with the presented format is introduced and the method to realize the interpolation in an open computer numerical control （CNC） system is developed by ourselves. These illustrated the feasibility of the proposed method and its capability of avoiding all the shortages of 5-axis linear interpolation method.

Short-term clinical outcomes of laparoscopic vs open rectal excision for rectal cancer: A systematic review and metaanalysis

AIM To review evidence on the short-term clinical outcomes of laparoscopic(LRR) vs open rectal resection(ORR) for rectal cancer.METHODS A systematic literature search was performed using Cochrane Central Register, MEDLINE, EMBASE, Scopus, Open Grey and Clinical Trials.gov register for randomized clinical trials(RCTs) comparing LRR vs ORR for rectal cancer and reporting short-term clinical outcomes. Articles published in English from January 1, 1995 to June, 30 2016 that met the selection criteria were retrieved and reviewed. The Preferred Reporting Items for Systematic reviews and Meta-Analysis(PRISMA) statements checklist for reporting a systematic review was followed. Random-effect models were used to estimate mean differences and risk ratios. The robustness and heterogeneity of the results were explored by performing sensitivity analyses. The pooledeffect was considered significant when P < 0.05.RESULTS Overall, 14 RCTs were included. No differences were found in postoperative mortality(P = 0.19) and morbidity(P = 0.75) rates. The mean operative time was 36.67 min longer(95%CI: 27.22-46.11, P < 0.00001), the mean estimated blood loss was 88.80 ml lower(95%CI:-117.25 to-60.34, P < 0.00001), and the mean incision length was 11.17 cm smaller(95%CI:-13.88 to-8.47, P < 0.00001) for LRR than ORR. These results were confirmed by sensitivity analyses that focused on the four major RCTs. The mean length of hospital stay was 1.71 d shorter(95%CI:-2.84 to-0.58, P < 0.003) for LRR than ORR. Similarly, bowel recovery(i.e., day of the first bowel movement) was 0.68 d shorter(95%CI:-1.00 to-0.36, P < 0.00001) for LRR. The sensitivity analysis did not confirm a significant difference between LRR and ORR for these latter two parameters. The overall quality of the evidence was rated as high. CONCLUSION LRR is associated with lesser blood loss, smaller incision length, and longer operative times compared to ORR. No differences are observed for postoperative morbidity and mortality.

Robot-assisted laparoscopic vs open gastrectomy for gastric cancer:Systematic review and meta-analysis

AIM To evaluate the potential effectiveness of robot-assisted gastrectomy(RAG) in comparison to open gastrectomy(OG) for gastric cancer patients.METHODS A comprehensive systematic literature search using PubM ed,EMBASE,and the Cochrane Library was carried out to identify studies comparing RAG and OG in gastric cancer.Participants of any age and sex were considered for inclusion in comparative studies of the two techniques independently from type of gastrectomy.A meta-analysis of short-term perioperative outcomes was performed to evaluate whether RAG is equivalent to OG.The primary outcome measures were set for estimated blood loss,operative time,conversion rate,morbidity,and hospital stay.Secondary among postoperative complications,wound infection,bleeding and anastomotic leakage were also analysed.RESULTS A total of 6 articles,5 retrospective and 1 randomized controlled study,involving 6123 patients overall,with 689(11.3%) cases submitted to RAG and 5434(88.7%) to OG,satisfied the eligibility criteria and were included in the meta-analysis.RAG was associated with longer operation time than OG(weighted mean difference 72.20 min;P < 0.001),but with reduction in blood loss and shorter hospital stay(weighted mean difference-166.83 mL and-1.97 d respectively;P < 0.001).No differences were found with respect to overall postoperative complications(P = 0.65),wound infection(P = 0.35),bleeding(P = 0.65),and anastomotic leakage(P = 0.06).The postoperative mortality rates were similar between the two groups.With respect to oncological outcomes,no statistical differences among the number of harvested lymph nodes were found(weighted mean difference-1.12;P = 0.10).CONCLUSION RAG seems to be a technically valid alternative to OG for performing radical gastrectomy in gastric cancer resulting in safe complications.

Dynamic management system of ore blending in an open pit mine based on GIS/GPS/GPRS

Using GIS, GPS and GPRS, a dynamic management system of ore blending in an open pit mine has been designed and developed. A linear program was established in a practical application. The system is very good at automatically drawing up a daily production plan of ore blending and monitors and controls the process of mining production in real time. Experiments under real conditions show that the performance of this system is stable and can satisfy production standards of ore blending in open pit mines.

Development of a PC-based Open Architecture Software-CNC System

As a key te..hnology in the field of advanced manufacturing, an open architecture controller is studied. In order to develop an open architecture software-CNC system on personal computer （PC） according to open modular architecture controllers （OMAC）. First, the software and hardware platform is chosen and software realization methodology for the CNC system is determined. Second, static modeling methods of an open architecture controller inclusive of object-oriented （OO） programming technology, dynamic link library （DLL） technology and system modules partition are investigated. Third, the dynamical behavioral modeling and the data flow representation of open architecture controller are discussed, which are both described in hierarchy fmite state machine （FSM） model. Fourth, a reusable software module model is established to develop software function module library. Finally, a 3-axis milling machine tool test-bed, named for HIT-CNC, is successfully designed by means of the constructed software function module library and the system configuring method. The experimental results show that, besides increasing the degree of reusability and openness, application of above-mentioned method- ology leads to significant decrease of development time as well as maintenance cost.

Transjugular intrahepatic portosystemic shunt versus open splenectomy and esophagogastric devascularization for portal hypertension with recurrent variceal bleeding

BACKGROUND： Transjugular intrahepatic portosystemic shunt（TIPS） and open splenectomy and esophagogastric devascularization（OSED） are widely used to treat patients with portal hypertension and recurrent variceal bleeding（PHRVB）. This study aimed to compare the effectiveness between TIPS and OSED for the treatment of PHRVB.METHODS： The data were retrospectively retrieved from 479 cirrhotic patients（Child-Pugh A or B class） with PHRVB, who had undergone TIPS（TIPS group） or OSED（OSED group） between January 1, 2010 and October 31, 2014.RESULTS： A total of 196 patients received TIPS, whereas 283 underwent OSED. Within one month after TIPS and OSED, the rebleeding rates were 6.1% and 3.2%, respectively（P=0.122）. Significantly lower incidence of pleural effusion,splenic vein thrombosis, and pulmonary infection, as well as higher hepatic encephalopathy rate, shorter postoperative length of hospital stay, and higher hospital costs were observed in the TIPS group than those in the OSED group. During the follow-up periods（29 months）, significantly higher incidences of rebleeding（15.3% vs 4.6%, P=0.001） and hepatic encephalopathy（17.3% vs 3.9%, P=0.001） were observed in the TIPS group than in the OSED group. The incidence of instent stenosis was 18.9%. The survival rates were 91.3% in the TIPS group and 95.1% in the OSED group. The long-term liver function did not worsen after either TIPS or OSED.CONCLUSION： For the patients with liver function in the Child-Pugh A or B class, TIPS is not superior over OSED in terms of PHRVB treatment and rebleeding prevention.

Monitoring dispatch information system of trucks and shovels in an open pit based on GIS/GPS/GPRS

Using GIS,GPS and GPRS,an intelligent monitoring and dispatch system of trucks and shovels in an open pit has been designed and developed.The system can monitor and dispatch open-pit trucks and shovels and play back their historical paths.An intelligent data algorithm is proposed in a practical application.The algorithm can count the times of deliveries of trucks and load- ings of shovels.Experiments on real scenes show that the performance of this system is stable and can satisfy production standards in open pits.

Costs of laparoscopic and open liver and pancreatic resection:A systematic review

AIM: To study costs of laparoscopic and open liver and pancreatic resections, all the compiled data from available observational studies were systematically reviewed.

Systematic review and Meta-analysis of treating open angle glaucoma with gonioscopy-assisted transluminal trabeculotomy

●AIM:To systematically review and Meta-analyze studies of managing open angle glaucoma(OAG)with gonioscopyassisted transluminal trabeculotomy(GATT)and to evaluate its effectiveness and safety.●METHODS:Eligible studies were retrieved and screened from five main electronic databases.Mean difference(MD)was hired to show the pooled effectiveness of intraocular pressure(IOP)and medication decrease achieved by GATT.In addition,combined surgical success and reoperation rates were calculated,and complications were also summarized.●RESULTS:Ten studies were included for systematic review,but one study was not pooled for Meta-analysis due to the repeated data.The combined IOP decrease after GATT was 9.81 mm Hg(95%CI:7.98-11.63 mm Hg)which showed significant reduction from the baselines(Z=10.52,P<0.0001).Similarly,the number of medications after GATT also decreased distinctly compared with that of medication before the surgery(Z=9.09,P<0.0001),and the pooled medication decrease was 1.68(95%CI:1.31-2.04).In addition,the combined surgical success rate was 85%,while the pooled reoperation rate was 20%.Sightthreatening complications occurred scarcely,whereas the pooled occurrence rate of hyphemia was as high as 36.0%.●CONCLUSION:GATT could effectively lower IOP and decrease medications for patients with OAG.Moreover,the procedure appears to be a safe and promising treatment for OAG due to its minimally-invasive and conjunctiva-sparing nature.

Optimization of transport passage with dragline system in thick overburden open pit mine

According to the characteristics of opencast coal resources and dragline technology system application in China,the structure and shifting step of transport passage are optimized in this paper.Typical coal transport passage is analyzed in aspects such as the internal dump occupation,dragline operation efficiency,coal transport distance,upper stripping distance and shifting quantities.The middle passage should be given priority in thick overburden open pit mine because the dragline system is only responsible for part stripping task.According to characteristics of middle passage,the transport passage is divided into parallel climbing,vertical climbing and horizontal transport.In addition,the transport passage structure optimization model and shifting distance optimization model are established in this paper.The case study in Heidaigou open pit mine shows that,the parallel climbing height is accounted for about 60%of the total height,and reasonable shifting distances of the first mining area and the second mining area are 240 and 320 m.Sensitivity analysis shows that,the total passage height has important influence on the shifting step,so it is with the stripping height and passage construction cost to the passage structure.

Preparation of Hadamard Gate for Open Quantum Systems by the Lyapunov Control Method

In this paper, the control laws based on the Lyapunov stability theorem are designed for a two-level open quantum system to prepare the Hadamard gate, which is an important basic gate for the quantum computers. First, the density matrix interested in quantum system is transferred to vector formation.Then, in order to obtain a controller with higher accuracy and faster convergence rate, a Lyapunov function based on the matrix logarithm function is designed. After that, a procedure for the controller design is derived based on the Lyapunov stability theorem. Finally, the numerical simulation experiments for an amplitude damping Markovian open quantum system are performed to prepare the desired quantum gate. The simulation results show that the preparation of Hadamard gate based on the proposed control laws can achieve the fidelity up to 0.9985 for the different coupling strengths.

Fixed combination of latanoprost and timolol vs the individual components for primary open angle glaucoma and ocular hypertension:a systematic review and meta-analysis

AIM:To assess the effects of the fixed combination of0.005% latanoprost and 0.5% timolol(FCLT) vs their individual components for primary open angle glaucoma(POAG) and ocular hypertension(OHT).· METHODS:After searched PubMed, EMBASE, the Cochrane Library and SCI, all randomized controlled clinical trials(RCTs) and cross-over studies were included. The control groups were the monotherapy or the concomitant therapy of latanoprost and timolol. The outcomes were visual field defect, optic atrophy, mean intraocular pressure(IOP) and IOP fluctuation. The analysis was carried out in RevMan version 5.1 software.RESULTS:Thepost-interventionmeanIOPofFCLTwas significantly lower compared to timolol [mean difference(MD)-2.92, 95%CI-3.28 to-2.55, P 【0.00001] and latanoprost(MD-1.11, 95%CI-1.51 to-0.72, P 【0.00001). The postintervention IOP fluctuation was also significantly lower compared to timolol(MD-0.88, 95%CI-1.23 to-0.53, P 【0. 00001) and latanoprost( MD- 0. 63, 95 % CI- 1. 04to-0.22, P =0.002). The mean IOP was higher in FCLT morning dose group than the one in unfixed combination of 0.005% latanoprost and 0.5% timolol(UFCLT)(MD1.10, 95% CI 0.81 to 1.39, P 【0.00001). Otherwise, there was no difference between FCLT evening dose group and UFCLT(MD 0.34, 95% CI-0.01 to 0.69, P =0.06).There was no statistical difference for the incidence ofvisual field defect and optic atrophy between FCLT and the monotherapy of components.CONCLUSION:A better IOP lowering effect has been demonstrated for FCLT compared to the monotherapy of components. The IOP lowering effect was worse for FCLT morning dose and almost same for FCLT evening dose compared to the UFCLT. We need more long-term high quality RCTs to demonstrate the outcomes of visual field defect and optic atrophy.visual field defect and optic atrophy between FCLT and the monotherapy of components.CONCLUSION:A better IOP lowering effect has been demonstrated for FCLT compared to the monotherapy of components. The IOP lowering effect was worse for FCLT morning dose and almost same for FCLT evening dose compared to the UFCLT. We need more long-term high quality RCTs to demonstrate the outcomes of visual field defect and optic atrophy.

An Open CAM System for Dentistry on the Basis of China-made 5-axis Simultaneous Contouring CNC Machine Tool and Industrial CAM Software

China-made 5-axis simultaneous contouring CNC machine tool and domestically developed industrial computer-aided manufacture （CAM） technology were used for full crown fabrication and measurement of crown accuracy, with an attempt to establish an open CAM system for dental processing and to promote the introduction of domestic dental computer-aided design （CAD）/CAM system. Commercially available scanning equipment was used to make a basic digital tooth model after preparation of crown, and CAD software that comes with the scanning device was employed to design the crown by using domestic industrial CAM software to process the crown data in order to generate a solid model for machining purpose, and then China-made 5-axis simultaneous contouring CNC machine tool was used to complete machining of the whole crown and the internal accuracy of the crown internal was measured by using 3D-MicroCT. The results showed that China-made 5-axis simultaneous contouring CNC machine tool in combination with domestic industrial CAM technology can be used for crown making and the crown was well positioned in die. The internal accuracy was successfully measured by using 3D-MicroCT. It is concluded that an open CAM system for den-tistry on the basis of China-made 5-axis simultaneous contouring CNC machine tool and domestic industrial CAM software has been established, and development of the system will promote the introduction of domestically-produced dental CAD/CAM system.

Visual outcomes in patients with open globe injuries compared to predicted outcomes using the Ocular Trauma Scoring system

AIMTo determine the visual outcomes in adult patients who sustained open globe injuries and to determine whether the visual prognosis following an eye injury in an African setting differs from the predicted outcomes according to the Ocular Trauma Score (OTS) study. A secondary aim was to establish the evisceration rate for these injuries and assess how this form of intervention affected outcomes in comparison to the OTS.METHODSA prospective case series of all patients admitted with open globe injuries over a two-year (July 2009 to June 2011) period. Injuries were scored using the OTS and the surgical intervention was recorded. The best corrected visual acuity at three months was regarded as visual outcome.RESULTSThere were 249 open globe injuries, of which 169 patients (169 eyes) completed the 3-month follow-up. All patients underwent primary surgery, 175 (70.3%) repairs, 61 (24.5%) eviscerations and 13 (5.2%) other procedures. Globe eviscerations were mainly done on OTS Category 1 cases, but outcomes in this category were not found to be different from OTS outcomes. Outcomes were significantly worse in Category 2, but when the entire distribution was tested, the differences were not statistically significant. The overall association between OTS outcomes and the final visual outcomes in this study was found to be a strong (P&#x0003c;0.005).CONCLUSIONReliable information regarding the expected outcomes of eye injuries will influence management decisions and patient expectations. The OTS is a valuable tool, the use of which has been validated in many parts of the world-it may also be a valid predictor in an African setting.