Geopolymer-based modification of blasting sealing materials and optimization of blasting block size in coal seams of open pit mines

This research proposes the utilization of a geopolymer-based blasting sealing material to improve the profitability of coal sales and reduce the rate of coal fragmentation during blasting in open pit mines.The study first focused on optimizing the strength of the sealant material and reducing curing time.This was achieved by regulating the slag doping and sodium silicate solution modulus.The findings demonstrated that increasing slag content and improving the material resulted in an early rise in strength while increasing the modulus of the sodium silicate solution extended the curing time.The slag doping level was fixed at 80 g,and the sodium silicate solution modulus was set at 1.5.To achieve a strength of 3.12 MPa,the water/gel ratio was set at 0.5.The initial setting time was determined to be 33 min,meeting the required field test duration.Secondly,the strength requirements for field implementation were assessed by simulating the action time and force destruction process of the sealing material during blasting using ANSYS/LS-DYNA software.The results indicated that the modified material meets these requirements.Finally,the Shengli Open Pit Coal Mine served as the site for the field test.It was observed that the hole-sealing material’s hydration reaction created a laminated and flocculated gel inside it.This enhanced the density of the modified material.Additionally,the pregelatinized starch,functioning as an organic binder,filled the gaps between the gels,enhancing the cohesion and bonding coefficient of the material.Upon analyzing the post-blasting shooting effect diagram using the Split-Desktop software,it was determined that the utilization of the modified blast hole plugging material resulted in a decrease in the rate of coal fragmentation from 33.2%to 21.1%.This reduction exhibited a minimal error of 1.63%when compared to the field measurement,thereby providing further confirmation of the exceptional plugging capabilities of the modified material.This study significantly contributes to establishing a solid theoretical basis for enhancing the blasting efficiency of open pit mines and,in turn,enhancing their economic advantages.

Effects of torpedo blasting on rockburst prevention during deep coal seam mining in the Upper Silesian Coal Basin

In the Upper Silesian Coal Basin(USCB),coal seams are exploited under progressively more difficult geological and mining conditions(greater depth,higher horizontal stress,more frequent occurrence of competent rock layers,etc.).Mining depth,dislocations and mining remnants in coal seams are the most important factors responsible for the occurrence of rockburst hazards.Longwall mining next to the mining edges of neighbouring coal seams is particularly disadvantageous.The levels of rockburst hazards are minimised via the use of rockburst prevention methods.One active prevention method is torpedo blasting in roof rocks.Torpedo blastings are performed in order to decrease local stress concentrations in rock masses and to fracture the roof rocks to prevent or minimise the impact of high-energy tremors on excavations.The estimation of the effectiveness of torpedo blasting is particularly important when mining is under difficult geological and mining conditions.Torpedo blasting is the main form of active rockburst prevention in the assigned colliery in the Polish part of the USCB.The effectiveness of blasting can be estimated using the seismic effect method,in which the seismic monitoring data and the mass of explosives are taken into consideration.The seismic effect method was developed in the Czech Republic and is always being used in collieries in the Czech part of the coal basin.Now,this method has been widely adopted for our selected colliery in the Polish part of the coal basin.The effectiveness of torpedo blastings in the faces and galleries of the assigned longwall in coal seam 506 has been estimated.The results show that the effectiveness of torpedo blastings for this longwall was significant in light of the seismic effect method,which corresponds to the in situ observations.The seismic effect method is regularly applied to estimating the blasting effectiveness in the selected colliery.

Effectiveness analysis of methane-drainage by deep-hole controlled pre-splitting blasting for preventing coal and gas outburst

In the study of the application effectiveness of deep-hole controlled pre-splittingblasting technology,it was found through laboratory micro test and field study on a mine insouth China that under the technology,coal masses produce many irreversible cracks.Afterblasting,the nearer the distance from blasting hole,the larger the BET surface areaand volume ratio of the infiltration pore are;they increased by 11.47%and 5.73%,respectively.The coefficient of air permeability is increased 4 times.After 3 months,the gasdrainage rate was increased by 66%.In the first 15 days,the cumulative pumped gas was1.93 times of blasting before.The average absolute gas emission decreased by 63.46%.Experimental results show that deep-hole controlled pre-splitting blasting not only preventscoal and gas outburst,but also gives good economic results.

Application of deep borehole blasting on fully mechanized hard top-coal pre-splitting and gas extraction in the special thick seam

In order to solve the problems of top-coal inadequate destruction and large amounts of gas emission in mining extra thick and hard coal seam,this study investigated the pre-splitting for deep borehole blasting and gas pre-draining technologies on top coal.The mechanism of the technologies was systematically expounded based on hard top-coal cracks development obtained by numerical simulation and theoretical analysis.The results show that explosive blasting in the hard rock results in a large number of cracks and large displacement in the rock mass due to the effect of explosion stress.Meanwhile,the thick top-coal caves,and desorbing gas flows along the cracks improve gas extraction.Finally,the pre-splitting for deep borehole blasting and gas pre-draining technologies was applied in No.3802 working face of Shui Liandong Coal Mine,which increases monthly output in the face to 67.34 kt and the drained gas concentration to 86.2%.The drained gas average concentration from each borehole reaches 40%,and the effect is remarkable.

Review on safe blasting technology in high-temperature coal seams in China

In order to define the development direction of safe blasting technology in high-temperature coal seams in China, this paper presents a systematic, state-of-the-art review on safe blasting technology. Information such as high-temperature coal fire extinguishment and cooling, anti-high-temperature blasting supplies, heat insulation blasting setting, operation procedures for high-temperature blasting, and so on, are presented. Analysis shows that the development of effective technology for coal seam fire extinguishing and cooling, the manufacture of anti-high-temperature blasting supplies, especially priming materials, the development of heat insulation blasting setting, and the establishment of technical specifications suit large-scale blasting design and construction work at high-temperature coal seams, are the essential methods for safe blasting at high temperature coal seams.

Extracting the core indicators of pulverized coal for blast furnace injection based on principal component analysis

An updated approach to refining the core indicators of pulverized coal used for blast furnace injection based on principal component analysis is proposed in view of the disadvantages of the existing performance indicator system of pulverized coal used in blast furnaces. This presented method takes into account all the performance indicators of pulverized coal injection, including calorific value, igniting point, combustibility, reactivity, flowability, grindability, etc. Four core indicators of pulverized coal injection are selected and studied by using principal component analysis, namely, comprehensive combustibility, comprehensive reactivity, comprehensive flowability, and comprehensive grindability. The newly established core index system is not only beneficial to narrowing down current evaluation indices but also effective to avoid previous overlapping problems among indicators by mutually independent index design. Furthermore, a comprehensive property indicator is introduced on the basis of the four core indicators, and the injection properties of pulverized coal can be overall evaluated.

Micromorphology and safety properties of meager and meager-lean coal for blast furnace injection

Four types of meager and meager-lean coal and one type of high-quality anthracite were selected based on the safety requirements for blast furnace coal injection and domestic coal quality to conduct microstructure and component analyses.The analyses of the organic and inorganic macerals and the chemical compositions of the selected coal samples indicate that the four types of meager and meager-lean coal have low volatilization,low ash content,and low sulfur content;these qualities are suitable for blast furnace injection.Grindability test was conducted on the four types of meager and meager-lean coal and the anthracite mixed coal samples.Results indicate that the mixture of meager and meager-lean coal and anthracite is beneficial to improve the grindability of pulverized coal.The explosive tests reveal that the selected coal samples are non-explosive or weakly explosive.When the proportion of meager and meager-lean coal is less than 40wt%,the mixed coal powder would not explode during the blowing process.The minimum ignition temperature test determines that the minimum ignition temperatures of the four types of meager and meager-lean coal and anthracite are 326,313,310,315,and 393°C,respectively.This study provides a guiding research idea for the safety of meager and meager-lean coal used in blast furnace injection.

Application of open-pit and underground mining technology for residual coal of end slopes

Given the conditions of residual coal from the boundary of a flat dipping open-pit mine,which uses strip areas mining and inner dumping with slope-covering,we propose an open-pit and underground integrated mining technology for residual coal of end slopes.In the proposal a conveyance road and ventilation conveyance near the slope are built,corresponding to the pit mining area and the surface coal mine dump,as well as an interval haulage tunnel and air-inlet tunnel.The outcome shows that such mining method may reduce the effect to slope stability from underground mining,it does not affect the dumping advance and has a high recovery rate of residual coal resources.The working face is timbered by single hydraulic props,transported by a scraper conveyor and supported by coal walls.This method of mining is one of layered top coal caving,with high resource recovery,low production cost where positive economic benefit can be realized.

A novel model for cost performance evaluation of pulverized coal injected into blast furnace based on effective calorific value

The combustion process of pulverized coal injected into blast furnace involves a lot of physical and chemical reactions. Based on the combustion behaviors of pulverized coal, the conception of coal effective calorific value representing the actual thermal energy provided for blast furnace was proposed. A cost performance evaluation model of coal injection was built up for the optimal selection of various kinds of coal based on effective calorific value. The model contains two indicators: coal effective calorific value which has eight sub-indicators and coal injection cost which includes four sub-indicators. In addition, the calculation principle and application of cost performance evaluation model in a Chinese large-scale iron and steel company were comprehensively introduced. The evaluation results finally confirm that this novel model is of great significance to the optimal selection of blast furnace pulverized coal.

Analysis of key technologies and development of integrated digital processing system for cast blasting design

Casting blast can greatly reduce the stripping cost and improve the production capacity of opencast coal mines. Key technologies including high bench blasting, inclined hole, millisecond blasting, pre-splitting blasting and casting blast parameters determination which have influence on the effect of casting blast have been researched with the combination of the ballistic theory and experience in mines. The integrated digital processing system of casting blast was developed in order to simplify the design process of casting blast, improve working efficiency and veracity of design result and comprehensively adopt the software programming method and the theory of casting blast. This system has achieved five functions, namely, the 3D visualization graphics management, the intelligent management of geological information, the intelligent design of casting blast, the analysis and prediction of the blasting effect and the automatic output of the design results. Long-term application in opencast coal mines has shown that research results can not only reduce the specific explosive consumption and improve the blasting effect, but also have high value of popularization and application.

Thermal recovery process of a backfilled open-pit in permafrost area at the Gulian strip coal mine in Northeast China

Timely and proper backfilling of open-pits in strip coal-mines has been an effective measurement for the recovery of the hydrothermal regimes and ecological environment in permafrost regions. In this study, numerical simulations and statistical regressions were applied for analyzing the recovery processes of the backfill and its major influencing factors for the thermal equilibrium in recently backfilled open pits at the Gulian strip coalmine in Mo'he, Northeast China. Results show that the thermal recovery time of backfilled areas is positively correlated to the backfill depth(BD) of the soils, the backfilled soil temperature(BST), and the mean annual ground surface temperature(MAGST); meanwhile, climate warming can impact on thermal regimes of the backfill area. The impact of climate warming on ground temperature of the backfill will show up significantly in about 50 years afterbackfilling(BD at 10.0 and 20.0 m, BST at 20.0°C) under the climate warming scenario(CWS) of 0.025°C·year ^(-1). Grey-relation analyses show that the sensitivity of the backfill recovery time declines in the order of the BD, BST and MAGST. On the basis of the abovementioned studies, the layer-by-layer backfilling in cold seasons is advised for more effective and more rapid recovery of thermal regimes of the backfilled open-pits in cold regions.

Combustion performance of pulverized coal and corresponding kinetics study after adding the additives of Fe_(2)O_(3) and CaO

Combustion performance of pulverized coal(PC)in blast furnace(BF)process is regarded as a criteria parameter to assess the prop-er injection dosage of PC.In this paper,effects of two kinds of additives,Fe_(2)O_(3) and CaO,on PC combustion were studied using the thermo-gravimetric method.The results demonstrate that both the Fe_(2)O_(3) and CaO can promote combustion performance index of PC including igni-tion index(C_(i)),burnout index(D_(b)),as well as comprehensive combustibility index(S_(n)).The S_(n) increases from 1.37×10^(−6) to 2.16×10^(−6)%2·min^(−2)·℃^(−3) as the Fe_(2)O_(3) proportion increases from 0 to 5.0wt%.Additionally,the combustion kinetics of PC was clarified using the Coats-Redfern method.The results show that the activation energy(E)of PC combustion decreases after adding the above additives.For instance,the E decreases from 56.54 to 35.75 kJ/mol when the Fe_(2)O_(3) proportion increases from 0 to 5.0wt%,which supports the improved combustion per-formance.Moreover,it is uneconomic to utilize pure Fe_(2)O_(3) and CaO in production.Based on economy analysis,we selected the iron-bearing dust(IBD)which contains much Fe_(2)O_(3) and CaO component to investigate,and got the same effects.Therefore,the IBD is a potential option for catalytic PC combustion in BF process.

3D model study of coal/coke combustion in a blast furnace effects of coal properties

A three-dimensional mathematical model of the combustion of pulverized coal and coke has been developed.The model is applied to the blowpipe-tuyere-raceway-coke bed region in an ironmaking blast furnace in one computational domain,which includes two parts:pulverized coal combustion model in the blowpipe-tuyere-raceway cavity and the coal/coke combustion model in the surrounding coke bed.The effects of coal properties are examined comprehensively,in terms of coal burnout and gas species distributions.The results indicate that using a coal of fine particle size or high VM content could improve burnout and would affect the gas composition considerably.The burnout is examined in two ways:compared with burnout along tuyere axis,burnout over the raceway surface is a more sensitive and sensible parameter to describe the amount of unburnt char entering the coke bed.The model is useful for examining the flow-thermo-chemical characteristics of the pulverized coal injection (PCI) process under various conditions in a blast furnace.

Development of Emission Factors for Quantification of Blasting Dust at Surface

Environmental impact assessment (EIA) and environmental management plan (EMP) is a statutory requirement for execution of new mining projects or for expansion of the operating projects. For this purpose, quantification of blasting dust emission is required. This can be done by developing emission factors for blasting. The concept is similar to that of specific charge in blasting. For mining operations other than blasting, quantification of dust can be done using emis- sion factors. Emission estimation techniques are very limited for blasting. In this study, the emission factors were de- veloped by carrying out a detailed field study at one of the largest opencast coal mines of India in all four seasons. Da- ta on atmospheric and meteorological conditions were generated by installing sodar and automatic weather station at the mine site. Respirable dust samplers were installed for monitoring of the dust emitted during coal or overburden bench blasting. Emission factors for dust concentrations were developed in gram per cubic meter of rock excavated. The developed emission factors were used to estimate dust emissions for adjacent mines due to similarity in mining and meteorological conditions. Seasonal variations in moisture contents in benches, where dust was monitored, indicated the lowest emission factors in monsoon due to high moisture in the bench materials. Similar field studies were also conducted at another coalfield of India for two seasons. It was found that the emission factors are site-specific.

包钢高炉喷吹煤粉利用率的测定

利用透射光偏光显微镜,对包钢高炉重力除尘灰、旋风除尘灰和布袋除尘灰中的碳素种类进行定性和定量分析,以测定高炉喷吹煤粉利用率。测定结果表明,3号高炉喷吹煤粉利用率上下限分别为89.03%和79.46%,4号高炉的喷吹煤粉利用率上下限分别为91.51%和84.14%。认为,3号高炉和4号高炉所使用喷吹煤粉来自同一系列,因此可以通过采取稳定煤粉粒度波动、优化富氧鼓风和提高入炉焦炭强度等措施,来提高喷吹煤粉利用率。

国内某高炉喷吹煤粉的性能评价

高炉喷吹煤粉的优点主要包括显著降低炼铁焦比及生产成本、有效调节高炉热制度、喷吹煤粉反应过程中提高煤气的穿透扩散能力和还原能力、缓解焦煤需求量、减少炼焦投资和环境污染等。为进一步优化高炉喷吹燃料结构和降低炼铁成本,文章对国内某高炉喷吹使用的煤粉的煤质特性进行了深入研究。结果表明:1#煤为烟煤,固定碳含量低、挥发分高,氢元素含量在所试验煤粉中最高,灰分中的CaO和MgO的含量之和最高,超过24%;其他煤种为无烟煤;4#煤的可磨性指数低于40;需要控制其在混煤中的配比。

构造煤层顶板爆破跨界面致裂增透机制研究及应用

深部煤炭开采地质条件恶化,原生煤在多期构造运动作用下形成松软低渗高瓦斯构造煤层,煤层钻孔施工困难,爆破增透产生的裂隙不发育且易于重新压实。针对目前构造煤层顶板爆破致裂增透关键技术没有得到根本突破问题,构建试验模型进行煤层顶板爆破相似模拟试验和数值分析,监测跨界面应力波传播和宏观三维裂隙演化形态,再现了爆破应力波传播和煤岩体内部损伤破坏过程。研究表明:(1)构造煤层爆破损伤范围主要集中在爆破孔和煤层上下煤岩交界面附近煤体;构造煤顶板爆破产生跨界面致裂卸压裂纹,爆破损伤沿爆破孔向四周岩体扩展,最后蔓延到煤层底板,爆破孔位置和上部煤岩交界面以及煤层内部的损伤较为严重。(2)爆破应力波从构造煤层顶板传播到煤岩交界面时发生波的透射和反射,透射的压缩应力波破坏煤体;反射的拉伸应力波反作用于煤岩交界面区域岩体。(3)爆破累积损伤产生的跨界面交叉裂纹卸压,使顶板岩层裂隙和构造煤层裂隙贯通,有利于构造煤层的瓦斯垂向运移流动和卸压瓦斯抽采。现场应用表明,煤层顶板爆破瓦斯抽采纯量及其浓度快速上升,瓦斯抽采纯量从爆破前的0.07 m^(3)/min提高到1.73 m^(3)/min,体积分数从10.46%上升到68.50%,并且长时间维持在较高水平。研究成果可为深部构造煤层瓦斯高效抽采提供理论基础和技术支持。

松软煤层底板爆破致裂增透模拟试验研究及应用

针对松软煤层爆破增透钻孔施工困难,爆破增透产生的裂隙不发育且易于重新压实的问题,提出在底板岩层开展爆破作业,达到松软煤层增透进而增加瓦斯有效抽采时间的目的。为了监测跨界面应力波传播规律及煤层损伤状况,在实验室构建了物理模型并开展了煤层底板爆破相似模拟试验。同时使用数值模拟的研究方法对煤层底板爆破过程中煤、岩体内部的损伤及裂隙的演化过程进行补充。结果表明:松软煤层底板爆破裂纹沿爆破孔向四周岩体扩展,爆破孔位置和底板煤岩交界面以及煤层内部的破坏较为严重,产生跨界面损伤裂纹。爆炸应力波从松软煤层底板岩层传播到松软煤层时,岩体和松软煤体的交界面产生透射压缩应力波和反射拉伸应力波,透射波作用于松软煤体,使煤层裂隙增加;反射波反作用于岩体,在煤岩交界面形成交叉裂纹,使底板岩层裂隙和松软煤层裂隙贯通,有利于松软煤层的瓦斯垂向运移流动和卸压瓦斯抽采。潘一东煤矿现场应用表明,煤层底板爆破增透后瓦斯抽采纯量及其浓度快速上升,抽采纯量从0.06 m^(3)/min提高到1.46 m^(3)/min,增加了23.33倍;瓦斯浓度从爆破前的10.46%上升到45.50%左右,增加了3.34倍,并且长时间维持在较高水平。研究成果可为深部松软煤层瓦斯高效抽采提供理论基础和技术支持。

基于蒙特卡罗方法的煤矿爆破作业风险评估

为量化分析煤矿爆破作业各作业步骤造成的风险以及全面客观地对其进行风险评估,借助蒙特卡罗方法建立煤矿爆破作业步骤风险评估模型,对作业流程的行为风险后果值进行累积概率分布,最终依据蒙特卡罗方法模拟的均值结果和作业流程总体风险结果判定各作业步骤的风险大小和风险等级,并提出控制此类不安全行为发生的措施。结果表明:爆破作业流程风险大小顺序依次为清退物品入库、装药、连线、警戒、起爆后安全检查、领取并检查爆破物品、起爆、运送爆破物品、接受爆破任务、作业前安全检查、起爆前安全检查、封孔。

预裂炮孔近区煤体爆破损伤特性研究

为探究工作面预裂炮孔近区煤体动力损伤及应力传递过程,选用HJC、RHT损伤模型,对单孔装药及双孔爆破工况开展爆破模拟。研究结果表明:单孔爆破下RHT模型的损伤随时间呈近似线性增长,HJC模型的爆破损伤随时间呈二次函数增长;单孔爆破中峰值压力与爆心距呈二次函数;双孔爆破下HJC、RHT模型的爆炸近区压力峰值相差2.27%,但远区峰值压力差值≥8.0 MPa;双孔爆破下RHT模型应力波传播:两孔贯穿-后向外扩展;HJC模型应力波传播:由爆破孔向四周扩展,后作用孔间区域;单孔/双孔爆破中HJC模型能量吸收时间分别为RHT模型的6~10倍,RHT模型可表征煤岩爆破演化。研究成果可为工作面安全高效施工提供参考。