Understanding the correlation between energy-state mismatching and open-circuit voltage loss in bulk heterojunction solar cells

Photoinduced intermolecular charge transfer(PICT)determines the voltage loss in bulk heterojunction(BHJ)organic photovoltaics(OPVs),and this voltage loss can be minimized by inducing efficient PICT,which requires energy-state matching between the donor and acceptor at the BHJ interfaces.Thus,both geometrically and energetically accessible delocalized state matching at the hot energy level is crucial for achieving efficient PICT.In this study,an effective method for quantifying the hot state matching of OPVs was developed.The degree of energy-state matching between the electron donor and acceptor at BHJ interfaces was quantified using a mismatching factor(MF)calculated from the modified optical density of the BHJ.Furthermore,the correlation between the open-circuit voltage(Voc)of the OPV device and energy-state matching at the BHJ interface was investigated using the calculated MF.The OPVs with small absolute MF values exhibited high Voc values.This result clearly indicates that the energy-state matching between the donor and acceptor is crucial for achieving a high Voc in OPVs.Because the MF indicates the degree of energy-state matching,which is a critical factor for suppressing energy loss,it can be used to estimate the Voc loss in OPVs.

Modeling and Simulation of Heterojunction Solar Cell with Mono Crystalline Silicon

The monocrystalline silicon is a promising material that could be used in solar cells that convert light into electricity. Although the cost of ordinary silicon (Si) solar cells has decreased significantly over the past two decades, the conversion efficiency of these cells has remained relatively high. While solar cells have a great potential as a device of renewable energy, the high cost they incur per Watt continues to be a significant barrier to their widespread implementation. As a consequence, it is vital to conduct research into alternate materials that may be used in the construction of solar cells. The heterojunction solar cell (HJSC), which is based on n-type zinc oxide (n-ZnO) and p-type silicon (p-Si), is one of the numerous alternatives of the typical Si single homojunction solar cell. There are many deficiencies that can be found in the published research on n-ZnO/p-Si heterojunction solar cell. Inconsistencies in the stated value of open circuit voltage (Voc) of the solar cell are one example of deficiency. The absence of a full theoretical study to evaluate the potential of the solar cell structure is another deficiency that can be found in these researches. A lower value of experimentally obtained VOC in comparison to the theoretical prediction based on the band-gap between n-ZnO and p-Si. There needs to be more consensus among scientists regarding the optimal conditions for the growth of zinc oxide. Many software’s are available for simulating and optimizing the solar cells based on these parameters. For this purpose, in this dissertation, I provide computational results relevant to n-ZnO/p-Si HJSC to overcome deficiencies that have been identified. While modeling and simulating the potential of the solar cell structure with AFORS-HET, it is essential to consider the constraints that exist in the real world. AFORS-HET was explicitly designed to mimic the multilayer solar cell arrangement. In AFORS-HET, we can add up to seven layers for solar cell layout. By using this software, we can figure out the open circuit voltage (VOC), the short circuit current (JSC), the quantum efficiency (QE, %), the heterojunction energy band structure, and the power conversion efficiency (PCE).

Comprehensive Examination of Solar Panel Design: A Focus on Thermal Dynamics

In the 21st century, the deployment of ground-based Solar Photovoltaic (PV) Modules has seen exponential growth, driven by increasing demands for green, clean, and renewable energy sources. However, their usage is constrained by certain limitations. Notably, the efficiency of solar PV modules on the ground peaks at a maximum of 25%, and there are concerns regarding their long-term reliability, with an expected lifespan of approximately 25 years without failures. This study focuses on analyzing the thermal efficiency of PV Modules. We have investigated the temperature profile of PV Modules under varying environmental conditions, such as air velocity and ambient temperature, utilizing Computational Fluid Dynamics (CFD). This analysis is crucial as the efficiency of PV Modules is significantly impacted by changes in the temperature differential relative to the environment. Furthermore, the study highlights the effect of airflow over solar panels on their temperature. It is found that a decrease in the temperature of the PV Module increases Open Circuit Voltage, underlining the importance of thermal management in optimizing solar panel performance.

A Comparative Study on Open Circuit Voltage Models for Lithium-ion Batteries

The current research of state of charge(SoC) online estimation of lithium-ion battery(LiB) in electric vehicles(EVs)mainly focuses on adopting or improving of battery models and estimation filters. However, little attention has been paid to the accuracy of various open circuit voltage(OCV) models for correcting the SoC with aid of the ampere-hour counting method. This paper presents a comprehensive comparison study on eighteen OCV models which cover the majority of models used in literature. The low-current OCV tests are conducted on the typical commercial LiFePO/graphite(LFP) and LiNiMnCoO/graphite(NMC) cells to obtain the experimental OCV-SoC curves at different ambient temperature and aging stages. With selected OCV and SoC points from experimental OCV-SoC curves, the parameters of each OCV model are determined by curve fitting toolbox of MATLAB 2013. Then the fitting OCV-SoC curves based on diversified OCV models are also obtained. The indicator of root-mean-square error(RMSE) between the experimental data and fitted data is selected to evaluate the adaptabilities of these OCV models for their main features, advantages,and limitations. The sensitivities of OCV models to ambient temperatures, aging stages, numbers of data points,and SoC regions are studied for both NMC and LFP cells. Furthermore, the influences of these models on SoC estimation are discussed. Through a comprehensive comparison and analysis on OCV models, some recommendations in selecting OCV models for both NMC and LFP cells are given.

Effect of Valence Band Tail Width on the Open Circuit Voltage of P3HT:PCBM Bulk Heterojunction Solar Cell:AMPS-1D Simulation Study

The effect of the valence band tail width on the open circuit voltage of P3HT：PCBM bulk heterojunction solar cell is investigated by using the AMPS-1D computer program. An effective medium model with exponential valence and conduction band tail states is used to simulate the photovoltaic cell. The simulation result shows that the open circuit voltage depends Iinearly on the logarithm of the generation rate and the slope depends on the width of the valence band tail. The open circuit voltage decreases with the increasing width of the band tail. The dark and light ideality factors increase with the width of the valence band tail.

Improvement of the Open Circuit Voltage of CZTSe Thin-Film Solar Cells by Surface Sulfurization Using SnS

The objective of this study is to find an effective method to improve Voc without Jsc loss for Cu2ZnSnSe4 （CZTSe） thin film solar cells, which have been fabricated by the one step co-evaporation technique. Surface sulfurization of CZTSe thin films is carried out by using one technique that does not utilize toxic H2S gas; a sequential evaporation of SnS after CZTSe deposition and the annealing of CZTSe thin films in selenium vapor. A Cu2ZnSn（S, Se）4 （CZTSSe） thin layer is grown on the surface of the CZTSe thin film after the annealing. The conversion efficiency of the completed device is improved due to the enhancement of Voc, which could be attributed to the formation of a hole-recombination barrier at the surface or the passivation of the surface and grain boundary by S incorporation.

Experimental Measurement of Minority Carriers Effective Lifetime in Silicon Solar Cell Using Open Circuit Voltage Decay under Magnetic Field in Transient Mode

This manuscript presents a simple method for excess minority carriers’ lifetime measurement within the base region of p-n junction polycrystalline solar cell in transient mode. This work is an experimental transient 3-Dimensionnal study. The magnitude of the magnetic field B is varied from 0 mT to 0.045 mT. Indeed, the solar cell is illuminated by a stroboscopic flash with air mass 1.5 and under magnetic field in transient state. The experimental details are assumed in a figure. The procedure is outlined by the Open Circuit Voltage Decay analysis. Effective minority carrier life-time is calculated by fitting the linear zone of the transient voltage decay curve because linear decay is an ideal decay. The kaleidagraph software permits access to the slope of the curve which is inversely proportional to the lifetime. The external magnetic effects on minority carriers’ effective lifetime is then presented and analyzed. The analysis shows that the charge carrier’s effective lifetime decrease with the magnetic field increase.

Data-Driven Fault Detection of Multiple Open-Circuit Faults for MMC Systems Based on Long Short-Term Memory Networks

This paper presents a long short-term memory(LSTM)-based fault detection method to detect the multiple open-circuit switch faults of modular multilevel converter(MMC)systems with full-bridge sub-modules(FB-SMs).Eighteen sensor signals of grid voltages,grid currents and capacitance voltages of MMC for single and multi-switch faults are collected as sampling data.The output signal characteristics of four types of single switch faults of FB-SM,as well as double switch faults in the same and different phases of MMC,are analyzed under the conditions of load variations and control command changes.A multi-layer LSTM network is devised to deeply extract the fault characteristics of MMC under different faults and operation conditions,and a Softmax layer detects the fault types.Simulation results have confirmed that the proposed LSTM-based method has better detection performance compared with three other methods:K-nearest neighbor(KNN),naive bayes(NB)and recurrent neural network(RNN).In addition,it is highly robust to model uncertainties and Gaussian noise.The validity of the proposed method is further demonstrated by experiment studies conducted on a hardware-in-the-loop(HIL)testing platform.

Corrosion Behaviour of Zr-Ag Alloys for Dental Implant Application

The electrochemical corrosion behaviour of three Zr-Ag alloys (Zr-1Ag, Zr-3Ag and Zr-5Ag) was investigated. Open circuit potential, linear potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques were employed in aerated artificial saliva (pH = 4.0) at 37°C. Silver alloying additions are found to be effective in enhancing the corrosion resistance of zirconium in artificial saliva environment. In fact, Zr-Ag alloys exhibit higher open circuit potentials, larger breakdown potentials and higher impedance values as compared to cp Zr. This behaviour can be ascribed to the formation of a thicker and more stable passive film with increasing compactness, able to provide better protection against the corrosion attack.

A Nonlinear Observer Approach of SOC Estimation Based on Hysteresis Model for Lithium-ion Battery

In this paper, a state of charge U+0028 SOC U+0029 estimation approach for lithium-ion battery based on equivalent circuit model and the input-to-state stability U+0028 ISS U+0029 theory has been proposed. According to the electrochemical performance of lithiumion battery, the equivalent circuit model with two RC networks is established, which includes hysteresis characteristic in inner electrochemical response process. The nonlinear relation between open circuit voltage U+0028 OCV U+0029 and SOC is obtained from a rapid test. Exponential fitting method is used to identify the parameters of the model. A novel state observer based on ISS theory is designed for lithium-ion battery SOC estimation. The designed observer is tested on AMESim and Simulink co-simulation. The simulation results show that the proposed method has a high SOC estimation accuracy with an error of about 2 percent. © 2017 Chinese Association of Automation.

Brief overview of electrochemical potential in lithium ion batteries

The physical fundamentals and influences upon electrode materials＇ open-circuit voltage （OCV） and the spatial distribution of electrochemical potential in the full cell are briefly reviewed. We hope to illustrate that a better understanding of these scientific problems can help to develop and design high voltage cathodes and interfaces with low Ohmic drop. OCV is one of the main indices to evaluate the performance of lithium ion batteries （LIBs）, and the enhancement of OCV shows promise as a way to increase the energy density. Besides, the severe potential drop at the interfaces indicates high resistance there, which is one of the key factors limiting power density.

Development of Modified 304 Stainless Steel Resistant to Stress Corrosion Cracking in Chloride Environment

The influence of water pollution and welding defects on MIC (microbiologically influenced corrosion) was studied. The open circuit potential (OCP) was measured during MIC test. It was found that OCP shifted to a higher level when the system was inoculated with bacteria while the OCP of those samples in water without bacteria was kept at a low level. The OCP decreased dramatically when MIC started in polluted water. Combination of weld defect heat tint, polluted water and adding bacteria causes MIC happen at high rate. Some elements inside the tubercle were analyzed with EDXA. The pits and biofilm were observed with SEM. Microbiological analysis revealed the difference of bacteria between corroded and uncorroded samples.

Analysis and Design of Planar Tunable Inner-Coupling Step Impedance Resonator

A full planar tunable band pass resonator is introduced, which is constructed by using novel symmetric step impedance resonator （SIR） and hyperabrupt varactors for wide bandwidth tuning and size reduction. The equivalent circuit model of the proposed resonator is set up. Theoretical analysis based on transmission line as well as odd and even-mode method is completed. The attractiveness of the approach presented lies in its simplicity. Based on the detailed analysis, a 6 GHz to 10 GHz varactor tuned resonator is designed, fabricated, and measured. It shows wideband tuning ability of 37%. The experimental results of the resonator have a good agreement with the analysis results.

Organic dyes based on triphenylamine for dye-sensitized solar cells:Structure–property relationships

Three new organic dyes based on triphenylamine with a structure of A-D-A-D-A (D1), A-D-A (D2) and D-A (D3) were designed, theoretically calculated and synthesized for dye-sensitized solar cells. Dye D1 exhibits a broader absorption than D2 and D3, due to the intramolecular charge transfer between the donor triphenylamine and the acceptor benzothiadiazole. Dye D1 exhibits a lower HOMO and a lower LUMO than D2 and D3 due to the electron-withdrawing benzothiadiazole. The number of anchoring group cyanoacrylic acid has no obvious influence on absorption and energy levels of D2 and D3. The LUMO of D1 locates on benzothiadiazole rather than cyanoacrylic acid anchoring groups, while the LUMOs of D2 and D3 are localized on cyanoacrylic acid. D2 and D3 give higher short-circuit current density than D1. D3 with one anchoring group gives the highest open-circuit voltage. Consequently, the D3-based device gives the highest efficiency. © 2016 Science Press

Large open-circuit voltage polymer solar cells by poly(3-hexylthiophene) with multi-adducts fullerenes

Polymer solar cells (PSCs) made by poly(3-hexylthiophene) (P3HT) with multi-adducts fullerenes, [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM), PC61BM-bisadduct (bisPC61BM) and PC61BM-trisadduct (trisPC61BM), were reported. Electrochemistry studies indicated that PC61BM, bisPC61BM and trisPC61BM had step-up distributional lowest unoccupied molecular orbital (LUMO) energy. PSCs made by P3HT with above PC61BMs show a trend of enlarged open-circuit voltages, which is in good agreement with the energy difference between the LUMO of PC61BMs and the HOMO of P3HT. On the contrary, reduced short-circuit currents (Jsc) were observed. The investigation of photo responsibility, dynamics analysis based on photo-induced absorption of composite films, P3HT:PC61BMs and n-channel thin film field-effect transistors of PC61BMs suggested that the short polaron lifetimes and low carrier mobilities were response for reduced Jsc. All these results demonstrated that it was important to develop an electron acceptor which has both high carrier mobility, and good compatibility with the electron donor conjugated polymer for approaching high performance PSCs.

Modeling the open circuit output voltage of piezoelectric nanogenerator

Piezoelectric nanogenerators(NGs)have been developed for converting mechanical energy into electric energy using ZnO,GaN,ZnSnO3,and PZT nanowires.Due to the unique polarity and non-central symmetry of the wurtzite structure,a composite made of using the conical shaped nanowires are used as a simple,cost-effective,and scalable nanogenerator.Based on the finite element methods,the output voltage of the nanogenerator is modeled numerically.The key factors:the spatial location of nanowires,length and dip angle of nanowires,thickness of NG devices,and the physical properties of the polymer inside NGs,which affect the output voltage are studied.The results provide guidance for optimization the output of piezoelectric nanogenerators.

A-π-D-π-A Type Small Molecules Using Ethynylene Linkages for Organic Solar Cells with High Open-circuit Voltages

Introducing ethynylene linkages in a conjugated molecule can deepen the HOMO level, decrease the steric con- straints and better delocalize the n electrons and so on, which are beneficial for organic solar cells. Furthermore, the typical method of introducing acetylene linkages by Sonogashira reactions can avoid the usage of toxic stannyl in- termediates and potentially dangerous lithiation reactions. In this study, two simple small molecules BEDPP and NEDPP are designed and synthesized, in which two diketopyrrolopyrrole units are symmetrically connected to benzene and naphthalene cores, respectively, via acetylene linkages. And the BHJ （Bulk Heterojunction） solar cells based on BEDPP and NEDPP without using solvent additive and without any post-treatment for the active layers provide us power conversion efficieneies of 1.48% and 2.31% with remarkably high open circuit voltages up to 0.90 and 0.98 V, respectively.

Enhancement of open circuit voltage in organic solar cells by doping a fluorescent red dye

The open circuit voltage （Voc） of small- molecule organic solar cells （OSCs） could be improved by doping suitable fluorescent dyes into the donor layers. In this paper, 4-（dicyanomethylene）-2-t-butyl-6-（1,1,7,7- tetramethyljulolidyl-9-enyl）-4H-pyran （DCJTB） was used as a dopant, and the performance of the OSCs with different DCJTB concentration in copper phthalocyanine （CuPc） was studied. The results showed that the Voc of the OSC with 50% of DCJTB in CuPc increased by 15%, compared with that of the standard CuPc/fullerene （C60） device. The enhancement of the Voc was attributed to the lower highest occupied molecular orbital （HOMO） level in the DCJTB than that in the CuPc. Also, the light absorption intensity is enhanced between 400 and 550nm, where CuPc and C6o have low absorbance, leading to a broad absorption spectrum.

THE DIRECTION DEPENDENCE OF SURFACE WAVE SPEED AT THE SURFACE OF MAGNETO-ELECTRO-ELASTIC HALF-SPACE

The direction dependence of surface wave speed and the influence of electrically and magnetically short/open circuit are investigated in this paper. First, the elastic, piezoelectric and piezomagnetic coefficients in the considered ordinate system are obtained by Bonde transformation from those in the crystal axis ordinate system. Then, the secular equation of surface wave is derived from the free traction condition on the surface of half space with consideration of short/open circuit case. Some numerical examples are given. The direction dependence of surface wave speed and the influences of short/open circuit are shown graphically and discussed based on the numerical results.

A novel Cu(I) complex based organic ultraviolet optical sensor

A novel Cu(I) complex with the formula of [Cu(DPEphos)(Dicnq)]BF4(CuDD) was synthesized and characterized by X-ray single crystal diffraction method,in which DPEphos and Dicnq denote bis[2-(diphenylphosphino)phenyl]ether and 6,7-Dicyanodipyrido[2,2-d:2 ,3 -f] quinoxaline,respectively.Organic ultraviolet optical sensor based on photovoltaic diode is fabricated by using CuDD as an electron acceptor and 4,4′,4″-tris-(2-methylphenyl phenylamino) triphenylamine(m-MTDATA) as an electron donor.The sensor is sensit...