Simulation on venting process and valve opening control method for gas trunk pipelines

Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the transient flow,it is necessary to establish a transient hydraulic-thermal simulation model in order to determine the venting time.In this paper,based on two kinds of venting scenarios in which there is only one venting point in the venting system of a gas trunk pipeline segment—namely,where the venting point is either at one of the two ends or at the junction of two gas trunk pipeline segments—transient hydraulic-thermal simulation models are established.The models consist of gas flow governing equations,the gas state equation,gas physical property equations,initial conditions,and appropriate boundary conditions.The implicit central difference method is used to discretize the gas flow partial differential equations,and the trust-region-dogleg algorithm is used to solve the equations corresponding to each time step,in order to dynamically simulate the whole venting process.The judgment condition for the end of the venting process is that the average pressure of gas trunk pipeline segment is less than 0.11 MPa(actual pressure).Comparing the simulation results of the proposed model with those of the OLGA software and real operational data,we find that the venting time error is less than 10%.On this basis,a venting valve opening control principle is proposed,which prevents the venting noise from exceeded the specified noise value(85 d B)in the venting design of domestic gas pipeline projects.The established calculation model for venting time(dynamic simulation model)for a gas trunk pipeline segment and the proposed opening control principle of venting valve provide reference for the optimal operation of gas pipeline venting systems.

Exploration of Methods for Preparation of Cattle Eyeball Paraffin Sections

[Objective] This study aimed to establish a new method for preparing paraffin sections of cattle eyebal s. [Method] The conventional method was used to prepare paraffin sections for cattle eyebal s in the control and a new method termed＆quot;opening a window on cornea and refixation＆quot; was used to prepare paraffin sections for cattle eyebal s in the treatment group. [Result] After the prepared specimens in the treatment group were fixed, it could be macroscopical y observed that retina and choroid were closely connected, with detachment occurring at a smal portion be-tween the two. According to the paraffin sections, it was microscopical y observed that the continuity of trabecular meshwork was intact, as wel as the continuity be-tween different layers of eyebal wal , without detachment between them, no retinal detachment, no shrinkage of each layer of tissue cells. [Conclusion] This study pro-vides a foundation for the basic research and pathological study of eyebal s.

Mass segregation of embedded clusters in the Milky Way

Embedded clusters are ideal laboratories for understanding the early phase of the dynamical evolution of clusters as well as massive star formation. An interesting observational phenomenon is that some of the embedded clusters show mass segregation, i.e., the most massive stars are preferentially found near the cluster center. We develop a new approach to describe mass segregation. Using this approach and the Two Micron All Sky Survey Point Source Catalog （2MASS PSC）, we analyze 18 embedded clusters in the Galaxy. We find that 11 of them are mass-segregated and that the others are not mass-segregated. No inversely mass-segregated cluster is found.

Implementation and validation of a volume-of-fluid and discrete-element-method combined solver in OpenFOAM

Numerous gas-liquid-solid flows exist in chemical engineering and metallurgical processes. Numerical modeling is an important topic that can be used to improve the design and investigate the operating conditions of these processes. The complicated interphase interaction within such three-phase systems, which include free surfaces and discrete phases, poses challenges in the existing methods. We imple- mented a volume-of-fluid （VOF） and discrete-element-method （DEM） combined solver, which should be useful for modeling the gas-liquid-solid systems, within the OpenFOAM framework. The Du Plessis and Masliyah drag force, added mass force, and capillary force were considered for fluid-particle coupling. The VOF-DEM solver was tested in three different cases, namely, particles in pure gas, particle collision in water, and gas-liquid-solid three-phase dam break. The results were validated against previous experi- ments and good agreement was obtained between the simulations and the experiments, which indicates the accuracy and suitability of this VOF-DEM solver for gas-liquid-solid systems.