Large eddy simulation of a 660 MW utility boiler under variable load conditions

Large eddy simulation (LES) has become a promising tool for pulverized coal combustion with the development of computational fluid dynamics (CFD) technologies in recent years. LES can better capture the unsteady features and turbulent structures of coal jet flame than Reynolds averaged Navier Stokes (RANS). The coal-fired power plants in China are now required to be operated in a wide load range and quickly respond to the electric grid. The boiler performance of variable loads should be evaluated in terms of flow, heat transfer, and combustion processes. In this paper, LES was applied to simulate a 660 MW ultra-supercritical boiler under BMCR (boiler maximum continue rate), 75%THA-100, and 50%THA-100 conditions. The predicted gas velocities agree well with the thermal calculation and the temperature error is less than 130 K. The simulation results show that the operation load has significant effects on the boiler performance. It is also proved that LES can provide guidance for the design and operation of advanced coal-fired boilers.

Computational investigation of hydrodynamics,coal combustion and NOx emissions in a tangentially fired pulverized coal boiler at various loads

This work presents a computational investigation of hydrodynamics,coal combustion and NOx emissions in a tangentially fired pulverized coal boiler at different loads(630,440 and 300 MW;relative loads of 100%,70%and 48%)to clarify the effect of load change on the furnace processes.A computational fluids dynamics model was established;the flow field,temperature profile,species concentration and NOx emissions were predicted numerically;and the influence of burner tilt angles was evaluated.Simulation results indicate that a decrease in boiler load decreases the gas velocity,attenuates the airflow rotations,and increases the tangent circle size.The high-temperature zone and flame moved toward the side walls.Such behaviors impair air-fuel mixing,heat transfer and steady combustion in the furnace.In terms of species concentrations,a decrease in boiler load increased the O2 content,decreased the CO content,and decreased the char burnout rates only slightly.A change in boiler load from 630 to 440 and 300 MW increased the NOx emissions from 202 to 234 and 247 mg/m^(3),respectively.Burner tilt angles are important in coal combustion and NOx emissions.A burner angle of-15°favors heat transfer and low NOx emissions(<185 mg/m^(3))for the current tangentially fired boiler.

Application of SNi PER framework to BESⅢ physics analysis

A fast physics analysis framework has been developed based on SNi PER to process the increasingly large data sample collected by BESⅢ.In this framework,a reconstructed event data model with Smart Ref is designed to improve the speed of Input/Output operations,and necessary physics analysis tools are migrated from BOSS to SNi PER.A real physics analysis e~＋e^-→ π~＋π^-J/ψ is used to test the new framework,and achieves a factor of10.3 improvement in Input/Output speed compared to BOSS.Further tests show that the improvement is mainly attributed to the new reconstructed event data model and the lazy-loading functionality provided by Smart Ref.