The existing resonant linear piezoelectric motors must operate with high working voltage in resonant condition,resulting in their narrow operating frequency range and poor running stability.Here,with the large displac...The existing resonant linear piezoelectric motors must operate with high working voltage in resonant condition,resulting in their narrow operating frequency range and poor running stability.Here,with the large displacement output characteristics of piezoelectric stacks,the trajectory at the drive foot of stator is firstly produced with two space quadrature piezoelectric actuators excited by sawtooth wave and square wave.Secondly,the friction drive principle of motor is used to analyze the working mechanisms of the continuous stepping motion.Finally,the motor prototype is designed and experiments are carried out.The experimental result shows that the motor can stably operate within the scope of 350 Hz to 750 Hz.When the excitation voltage is 30 Vand pre-load is 3Nor10 N,the lateral amplitude of the drive foot is approximately 4μm and the stable average interval ranges from3.1μm to 3.2μm with the error rate of 5%—7.5%.展开更多
An electromagnetic parametrically excited rolling pendulum energy harvester with self-tuning mechanisms subject to multi-frequency excitation is proposed and investigated in this paper.The system consists of two uncou...An electromagnetic parametrically excited rolling pendulum energy harvester with self-tuning mechanisms subject to multi-frequency excitation is proposed and investigated in this paper.The system consists of two uncoupled rolling pendulum.The resonance frequency of each the rolling pendulum can be automatically tuned by adjusting its geometric parameters to access parametric resonance.This harvester can be used to harvest the energy at low frequency.A prototype is developed and evaluated.Its mathematical model is derived.A cam with rolling follower mechanism is employed to generate multi-frequency excitation.An experimental study is conducted to validate the proposed concept.The experimental results are confirmed by the numerical results.The harvester is successfully tuned when the angular velocity of the cam is changed from 1.149 to 1.236 Hz.展开更多
The construction of high-speed rail(HSR)network has promoted the social-economic ties of cities,accelerated the compression of time and space,and changed the pattern of regional development.In this paper,with the adop...The construction of high-speed rail(HSR)network has promoted the social-economic ties of cities,accelerated the compression of time and space,and changed the pattern of regional development.In this paper,with the adoption of the operation frequency data of HSR from 12306 website,and based on the HSR connection strength model and social network analysis model,as well as according to the HSR connection strength,HSR network density,centrality,agglomeration subgroup,and other indicators,we analyzed the characteristics of HSR network structure in Northeast China.Results show that the number of HSR cities in Northeast China is small,cities in HSR network generally exhibit weak connectivity,and the existence of HSR network marginalizes cities such as Ulanhot,Baicheng,and Songyuan,which significantly reduce the overall network connectivity of Northeast China.The overall centrality of HSR network in Northeast China is characterized by“one axis,four edges”;specifically,the one axis is located in Harbin-Dalian transportation line and the four edges are located on both sides of the main axis of Harbin-Dalian transportation line.Eight agglomeration subgroups(four double city subgroups and four multi city subgroups)have formed in Northeast China.The core status of Shenyang in HSR network is improved significantly,and“one axis and two wings”HSR network in Liaoning Province is improved significantly.With the gradual expansion of Chaoyang-Fuxin,Dandong-Benxi,and Jilin-Yanji branch networks,the“point axis”HSR network mode in Northeast China has gradually developed and matured.In the future,it is recommended to rely on eight agglomerating subgroups to encrypt HSR network structure,create secondary node central cities,and gradually build a new pattern of opening up in Northeast China.展开更多
The overlap of bus and rail transit routes is common in China. This overlap provides passengers multiple choices for one trip. However, the availability of multiple options would cause uncertainty in the travel distri...The overlap of bus and rail transit routes is common in China. This overlap provides passengers multiple choices for one trip. However, the availability of multiple options would cause uncertainty in the travel distribution of passengers. Given that buses and rail transits are becoming increasingly common, this paper aims to present the overlapped operation condition of bus and rail transit using a bi-level model from the perspective of bus operators. Frequency optimization model is established in the upper-level model. A heuristic algorithm called shuffled complex evolution(SCE-UA) method is used to solve the established frequency optimization model, and three other heuristic methods are compared with SCE-UA. A lower-level Logit model based on Agent simulation is set for traffic mode split. Data on the transit system in Dalian city are chosen as an example to test the feasibility of the model and the algorithm. Results show that as the overlapped optimization of bus route and rail transit routes changed primary bus frequency, the use of SCE-UA to solve such problems has evident advantages and feasibility; furthermore, changed bus frequency would improve bus operations.展开更多
A fourth-order Gm-C Chebyshev low-pass filter is presented as channel selection filter for reconfigurable multi-mode wireless receivers. Low-noise technologies are proposed in optimizing the noise characteristics of b...A fourth-order Gm-C Chebyshev low-pass filter is presented as channel selection filter for reconfigurable multi-mode wireless receivers. Low-noise technologies are proposed in optimizing the noise characteristics of both the Gm cells and the filter topology. A frequency tuning strategy is used by tuning both the transconductance of the Gm cells and the capacitance of the capacitor banks. To achieve accurate cut-off frequencies, an on-chip calibration circuit is presented to compensate for the frequency inaccuracy introduced by process variation. The filter is fabricated in a 0.13 m CMOS process. It exhibits a wide programmable bandwidth from 322.5 k Hz to20 MHz. Measured results show that the filter has low input referred noise of 5.9 n V/(Hz)^(1/2) and high out-of-band IIP3 of 16.2 d Bm. It consumes 4.2 and 9.5 m W from a 1 V power supply at its lowest and highest cut-off frequencies respectively.展开更多
This study presents a free piston expander-linear generator (FPE-LG) for engine waste heat recovery.The control strategies based on displacement (control strategy A) and valve timings (control strategy B) are proposed...This study presents a free piston expander-linear generator (FPE-LG) for engine waste heat recovery.The control strategies based on displacement (control strategy A) and valve timings (control strategy B) are proposed.The operation and output characteristics with different control strategies are conducted.The results show that control strategy has significant effect on the FPE-LG performance.When FPE-LG operates with control strategy A,the operation frequency is determined by the intake pressure,advanced exhaust duration,fixed position point and external load resistance,whereas it is only related with the intake/exhaust time and advanced exhaust duration (ta) for control strategy B.The external load resistance has slight influence on the stroke length for these two control strategies.For control strategy A,when advanced exhaust duration is more than 40 ms,the stroke length rises with the intake pressure,whereas it first rises and then reduces when advanced exhaust duration is less than 40 ms.There exist the optimal external load resistance and advanced exhaust duration to achieve the maximum power output with control strategy A,whereas the average power output reduces with the increasing advanced exhaust duration when using control strategy B.Stable operation and high power output can be obtained by using different control strategies and adjusting relevant operation parameters.展开更多
基金supported by the National Natural Science Foundation of China (Nos.51375224,51405420)the Natural Science Foundation of Jiangsu Province (No.BK20140474)
文摘The existing resonant linear piezoelectric motors must operate with high working voltage in resonant condition,resulting in their narrow operating frequency range and poor running stability.Here,with the large displacement output characteristics of piezoelectric stacks,the trajectory at the drive foot of stator is firstly produced with two space quadrature piezoelectric actuators excited by sawtooth wave and square wave.Secondly,the friction drive principle of motor is used to analyze the working mechanisms of the continuous stepping motion.Finally,the motor prototype is designed and experiments are carried out.The experimental result shows that the motor can stably operate within the scope of 350 Hz to 750 Hz.When the excitation voltage is 30 Vand pre-load is 3Nor10 N,the lateral amplitude of the drive foot is approximately 4μm and the stable average interval ranges from3.1μm to 3.2μm with the error rate of 5%—7.5%.
文摘An electromagnetic parametrically excited rolling pendulum energy harvester with self-tuning mechanisms subject to multi-frequency excitation is proposed and investigated in this paper.The system consists of two uncoupled rolling pendulum.The resonance frequency of each the rolling pendulum can be automatically tuned by adjusting its geometric parameters to access parametric resonance.This harvester can be used to harvest the energy at low frequency.A prototype is developed and evaluated.Its mathematical model is derived.A cam with rolling follower mechanism is employed to generate multi-frequency excitation.An experimental study is conducted to validate the proposed concept.The experimental results are confirmed by the numerical results.The harvester is successfully tuned when the angular velocity of the cam is changed from 1.149 to 1.236 Hz.
基金the National Natural Science Foundation of China(41871151).
文摘The construction of high-speed rail(HSR)network has promoted the social-economic ties of cities,accelerated the compression of time and space,and changed the pattern of regional development.In this paper,with the adoption of the operation frequency data of HSR from 12306 website,and based on the HSR connection strength model and social network analysis model,as well as according to the HSR connection strength,HSR network density,centrality,agglomeration subgroup,and other indicators,we analyzed the characteristics of HSR network structure in Northeast China.Results show that the number of HSR cities in Northeast China is small,cities in HSR network generally exhibit weak connectivity,and the existence of HSR network marginalizes cities such as Ulanhot,Baicheng,and Songyuan,which significantly reduce the overall network connectivity of Northeast China.The overall centrality of HSR network in Northeast China is characterized by“one axis,four edges”;specifically,the one axis is located in Harbin-Dalian transportation line and the four edges are located on both sides of the main axis of Harbin-Dalian transportation line.Eight agglomeration subgroups(four double city subgroups and four multi city subgroups)have formed in Northeast China.The core status of Shenyang in HSR network is improved significantly,and“one axis and two wings”HSR network in Liaoning Province is improved significantly.With the gradual expansion of Chaoyang-Fuxin,Dandong-Benxi,and Jilin-Yanji branch networks,the“point axis”HSR network mode in Northeast China has gradually developed and matured.In the future,it is recommended to rely on eight agglomerating subgroups to encrypt HSR network structure,create secondary node central cities,and gradually build a new pattern of opening up in Northeast China.
文摘The overlap of bus and rail transit routes is common in China. This overlap provides passengers multiple choices for one trip. However, the availability of multiple options would cause uncertainty in the travel distribution of passengers. Given that buses and rail transits are becoming increasingly common, this paper aims to present the overlapped operation condition of bus and rail transit using a bi-level model from the perspective of bus operators. Frequency optimization model is established in the upper-level model. A heuristic algorithm called shuffled complex evolution(SCE-UA) method is used to solve the established frequency optimization model, and three other heuristic methods are compared with SCE-UA. A lower-level Logit model based on Agent simulation is set for traffic mode split. Data on the transit system in Dalian city are chosen as an example to test the feasibility of the model and the algorithm. Results show that as the overlapped optimization of bus route and rail transit routes changed primary bus frequency, the use of SCE-UA to solve such problems has evident advantages and feasibility; furthermore, changed bus frequency would improve bus operations.
基金Project supported by the National Natural Science Foundation of China(No.61574045)
文摘A fourth-order Gm-C Chebyshev low-pass filter is presented as channel selection filter for reconfigurable multi-mode wireless receivers. Low-noise technologies are proposed in optimizing the noise characteristics of both the Gm cells and the filter topology. A frequency tuning strategy is used by tuning both the transconductance of the Gm cells and the capacitance of the capacitor banks. To achieve accurate cut-off frequencies, an on-chip calibration circuit is presented to compensate for the frequency inaccuracy introduced by process variation. The filter is fabricated in a 0.13 m CMOS process. It exhibits a wide programmable bandwidth from 322.5 k Hz to20 MHz. Measured results show that the filter has low input referred noise of 5.9 n V/(Hz)^(1/2) and high out-of-band IIP3 of 16.2 d Bm. It consumes 4.2 and 9.5 m W from a 1 V power supply at its lowest and highest cut-off frequencies respectively.
文摘This study presents a free piston expander-linear generator (FPE-LG) for engine waste heat recovery.The control strategies based on displacement (control strategy A) and valve timings (control strategy B) are proposed.The operation and output characteristics with different control strategies are conducted.The results show that control strategy has significant effect on the FPE-LG performance.When FPE-LG operates with control strategy A,the operation frequency is determined by the intake pressure,advanced exhaust duration,fixed position point and external load resistance,whereas it is only related with the intake/exhaust time and advanced exhaust duration (ta) for control strategy B.The external load resistance has slight influence on the stroke length for these two control strategies.For control strategy A,when advanced exhaust duration is more than 40 ms,the stroke length rises with the intake pressure,whereas it first rises and then reduces when advanced exhaust duration is less than 40 ms.There exist the optimal external load resistance and advanced exhaust duration to achieve the maximum power output with control strategy A,whereas the average power output reduces with the increasing advanced exhaust duration when using control strategy B.Stable operation and high power output can be obtained by using different control strategies and adjusting relevant operation parameters.