Fiber Grating Ring Laser in All Optical Communication System

Erbium fiber grating ring laser (EFRL) witn an integrated travelling wave and low polarization mode noise is reported. Through modulated experiment of a successful 2.488 Gb/s RZ data, it is shown that the EFRL is a promising alternative to DFB lasers for high-speed transmission applications.

Single Photon Detection Technology in Underwater Wireless Optical Communication:Modulation Modes and Error Correction Coding Analysis

This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding types on communication performance.The study investigates the impact of on-off keying(OOK)and 2-pulse-position modulation(2-PPM)on the bit error rate(BER)in single-channel intensity and polarization multiplexing.Furthermore,it compares the error correction performance of low-density parity check(LDPC)and Reed-Solomon(RS)codes across different error correction coding types.The effects of unscattered photon ratio and depolarization ratio on BER are also verified.Finally,a UWOC system based on SPD is constructed,achieving 14.58 Mbps with polarization OOK multiplexing modulation and 4.37 Mbps with polarization 2-PPM multiplexing modulation using LDPC code error correction.

Training-based symbol detection with temporal convolutional neural network in single-polarized optical communication system

In order to reduce the physical impairment caused by signal distortion,in this paper,we investigate symbol detection with Deep Learning(DL)methods to improve bit-error performance in the optical communication system.Many DL-based methods have been applied to such systems to improve bit-error performance.Referring to the speech-to-text method of automatic speech recognition,this paper proposes a signal-to-symbol method based on DL and designs a receiver for symbol detection on single-polarized optical communications modes.To realize this detection method,we propose a non-causal temporal convolutional network-assisted receiver to detect symbols directly from the baseband signal,which specifically integrates most modules of the receiver.Meanwhile,we adopt three training approaches for different signal-to-noise ratios.We also apply a parametric rectified linear unit to enhance the noise robustness of the proposed network.According to the simulation experiments,the biterror-rate performance of the proposed method is close to or even superior to that of the conventional receiver and better than the recurrent neural network-based receiver.

Efficient stochastic parallel gradient descent training for on-chip optical processor

In recent years,space-division multiplexing(SDM)technology,which involves transmitting data information on multiple parallel channels for efficient capacity scaling,has been widely used in fiber and free-space optical communication sys-tems.To enable flexible data management and cope with the mixing between different channels,the integrated reconfig-urable optical processor is used for optical switching and mitigating the channel crosstalk.However,efficient online train-ing becomes intricate and challenging,particularly when dealing with a significant number of channels.Here we use the stochastic parallel gradient descent(SPGD)algorithm to configure the integrated optical processor,which has less com-putation than the traditional gradient descent(GD)algorithm.We design and fabricate a 6×6 on-chip optical processor on silicon platform to implement optical switching and descrambling assisted by the online training with the SPDG algorithm.Moreover,we apply the on-chip processor configured by the SPGD algorithm to optical communications for optical switching and efficiently mitigating the channel crosstalk in SDM systems.In comparison with the traditional GD al-gorithm,it is found that the SPGD algorithm features better performance especially when the scale of matrix is large,which means it has the potential to optimize large-scale optical matrix computation acceleration chips.

Research on the Performance of Non-Line-of-Sight Ultraviolet Communication in Rain and Fog Environment

Wireless ultraviolet communication is a new type of communication mode. It refers to the transmission of information through the scattering of ultraviolet light by atmospheric particles and aerosol particles. The scattering characteristics can enable the wireless ultraviolet communication system to transmit ultraviolet light signals in a non-line-of-sight manner, which overcomes the weakness that other free space optical communications must work in a line-of-sight manner. Based on the basic theory of scattering and absorption in atmospheric optics, taking the ultraviolet light with a wavelength of 266 nm as an example, this paper introduces the classical model of non-line-of-sight single-scattering coplanarity based on the ellipsoid coordinate system. The model is used to simulate and analyze the relationship between the geometric parameters such as transmission distance, transceiver elevation angle and transceiver half-angle and the received optical power per unit area. The performance of non-line-of-sight ultraviolet communication system in rain and fog environment is discussed respectively. The results show that the transmission quality of non-line-of-sight ultraviolet atmospheric propagation is greatly affected by the communication distance. As the distance increases, the received light power per unit area gradually decreases. In addition, increasing the emission elevation angle, the receiving elevation angle and the receiving half angle is an important way to improve the system performance.

Adaptive modulation in MIMO optical wireless communication systems

In the intensity modulation and direct detection （IM/DD） multiple-input multiple-output （MIMO） optical wireless communication systems, a direct-current-biased adaptive modulation scheme is proposed to guarantee the nonnegative property of transmitted signals, and the MIMO channel is converted to a parallel channel by using a singular value decomposition. Besides, a QR decomposition and successive interference cancellation based adaptive modulation scheme is proposed, and the MIMO channel can be simplified to a parallel channel under the bit error ratio （BER） target constraint. The power is optimally allocated to each sub-channel to maximize the data rate. Simulation results show that the proposed adaptive modulation schemes can effectively improve the transmission rate of the systems under the BER target and constant optical power constraints. The proposed adaptive modulation schemes make use of the multiplexing gain of the MIMO techniques, and can further improve the spectrum efficiency of optical wireless systems.

Single‑Layer ZnO Hollow Hemispheres Enable High‑Performance Self‑Powered Perovskite Photodetector for Optical Communication

The carrier transport layer with reflection reduction morphology has attracted extensive attention for improving the utilization of light.Herein,we introduced single-layer hollow ZnO hemisphere arrays(ZHAs)behaving light trapping effect as the electron transport layer in perovskite photodetectors(PDs).The singlelayer hollow ZHAs can not only reduce the reflection,but also widen the angle of the effective incident light and especially transfer the distribution of the optical field from the ZnO/FTO interface to the perovskite active layer confirmed by the 3D finitedifference time-domain simulation.These merits benefit for the generation,transport and separation of carriers,improving the light utilization efficiency.Finally,our optimized FTO/ZHA/CsPbBr3/carbon structure PDs showed high self-powered performance with a linear dynamic range of 120.3 dB,a detectivity of 4.2×10^(12) Jones,rise/fall time of 13/28μs and the f_(−3) dB of up to 28 kHz.Benefiting from the high device performance,the PD was demonstrated to the application in the directional transmission of encrypted files as the signal receiving port with super high accuracy.This work uniquely utilizes the features of high-performance self-powered perovskite PDs in optical communication,paving the path to wide applications of all-inorganic perovskite PDs.

850/940-nm VCSEL for optical communication and 3D sensing

This paper is going to review the state-of-the-art of the high-speed 850/940-nm vertical cavity surface emitting laser（VCSEL）, discussing the structural design, mode control and the related data transmission performance. InGaAs/AlGaAsmultiple quantum well （MQW） was used to increase the differential gain and photon density in VCSEL. The multiple oxidelayers and oxide-confined aperture were well designed in VCSEL to decrease the parasitic capacitance and generate single mode （SM） VCSEL. The maximal modulation bandwidth of 30 GHz was achieved with well-designed VCSEL structure. At the end of the paper, other applications of the near-infrared VCSELs are discussed.

Free-Space Optical communication using visible light

The possibility of visible red light laser being used as signal light source for Free-Space Optical (FSO) communication is proposed. Based on analysis of transmission in atmospheric channel concerning 650 nm laser beam, performance of wireless laser communication link utilizing a low power red laser diode was evaluated. The proposed system can achieve a maximum range of 300 m at data rate 100 Mb/s theoretically. An experimental short-range link at data rate 10 Mb/s covering 300 m has been implemented in our university. It is feasible to enhance the system performance such as link range and data rate by increasing transmitting power and decreasing laser beam divergence angle or through other approaches.

Green indoor optical wireless communication systems:Pathway towards pervasive deployment

The Optical Wireless Communication(OWC)offers the high capacity of optical fiber communication with the flexibility of wireless communication.Since it works in the optical region of the ElectroMagnetic(EM)spectrum,it guarantees safety and security which are critical in radio and microwave frequency communication.The principal objective of this paper is to analyze the indoor OWC systems on these guaranteed features,and safety and security are jointly denoted by the term green.The high obstacle impermeability of optical signals and their directivity strengthen the security of indoor OWC data transmission.The confidentiality and authenticity of optical wireless data can also be preserved with the Quantum Key Distribution(QKD).This paper provides a technological overview and a review of literature about the OWC system that helps to identify the challenges in the path of a ubiquitous deployment of green wireless communication systems.Significant advancements in the sources and detectors are discussed together with the coding,modulation and multiplexing techniques for making highly robust OWC links.The ubiquitous deployment of green OWC necessitates the development of optical transmitters and receivers,performance enhancement techniques,incorporation of uplink and energy harvesting abilities,and safety and security enhancement techniques.Hence,a special emphasis is placed on these aspects and their challenges towards the green implementation.Furthermore,the paper explores some significant indoor applications based on the OWC that have great impacts on the Next Generation Networks(NGN)and the Internet of Things(IoT).

Novel graphene enhancement nanolaser based on hybrid plasmonic waveguides at optical communication wavelength

Surface plasmon polariton （SPP） nanolaser, which can achieve an all-optical circuit, is a major research topic in the field of micro light source. In this study, we examine a novel SPP graphene nanolaser in an optoelectronic integration field. The proposed nanolaser consists of metallic silver, two-dimensional （2D） graphene and high refractive index semiconductor of indium gallium arsenide phosphorus. Compared with other metals, Ag can reduce the threshold and propagation loss. The SPP field, excited by coupling Ag and InGaAsE can be enhanced by the 2D material of graphene. In the proposed nanolaser, the maximum value of propagation loss is approximately 0.055 dB/~tm, and the normalized mode area is con- stantly less than 0.05, and the best threshold can achieve 3380 cm l simultaneously. Meanwhile, the proposed nanolaser can be fabricated by conventional materials and work in optical communication （1550 nm）, which can be easily achieved with current nanotechnology. It is also an important method that will be used to overcome the challenges of high speed, miniaturization, and integration in optoelectronic integrated technology.

Faraday laser at Rb 1529 nm transition for optical communication systems

We experimentally demonstrate a Faraday laser at Rb 1529 nm transition by using a performance-improved Rb electrodeless-discharge-lamp-based excited-state Faraday anomalous dispersion optical filter as the frequency- selective element. Neither the electrical locking scheme nor the additional frequency-stabilized pump laser are used. The frequency of the external-cavity diode laser is stabilized to the Rb 1529 nm transition, and the Allan deviation of the Faraday laser is measured by converting the optical intensity into frequency. The Faraday laser can be used as a frequency standard in the telecom C band for further research on metrology, microwave photonics, and optical communication systems.

Petahertz communication:Harmonizing optical spectra for wireless communications

With the rapid deployment of Next-Generation Networks(NGN),the research community has initiated discussions on an entirely new suite of optical enabling techniques.To pave the way for the development of future wireless networks,this article aims to unify the existing infrared,visible light,and ultraviolet subbands while also exploring the potential of the Petahertz(PHz)band to support extremely bandwidth-thirsfy telepresence style applications.Our focus is on the emerging Petahertz Communication(PetaCom)framework,scenario-dependent propagation channels,modulation schemes,system performance,multiple access techniques,and networking.We conclude with a range of PetaCom challenges and open research issues.

Power Equilibrium in Dense Wavelength Division Multiplexing Optical Communication Systems

The disequilibrium of the optical power among different channels is analyzed for the dense wavelength division multiplexing optical communication systems. And the new technologies and devices for optical amplifying, filtering, adding /dropping,etc,have been reviewed, which can be used to equalize dynamically the optical power in optical networks.

Proposed Different Signal Processing Tools for Efficient Optical Wireless Communications

Optical Wireless Communication(OWC)is a new trend in communication systems to achieve large bandwidth,high bit rate,high security,fast deployment,and low cost.The basic idea of the OWC is to transmit data on unguided media with light.This system requires multi-carrier modulation such as Orthogonal Frequency Division Multiplexing(OFDM).This paper studies optical OFDM performance based on Intensity Modulation with Direct Detection(IM/DD)system.This system requires a non-negativity constraint.The paper presents a framework for wireless optical OFDM system that comprises(IM/DD)with different forms,Direct Current biased Optical OFDM(DCO-OFDM),Asymmetrically Clipped Optical OFDM(ACO-OFDM),Asymmetrically DC-biased Optical OFDM(ADO-OFDM),and Flip-OFDM.It also considers channel coding as a tool for error control,channel equalization for reducing deterioration due to channel effects,and investigation of the turbulence effects.The evaluation results of the proposed framework reveal enhancement of performance.The performance of the IM/DD-OFDM system is investigated over different channel models such as AWGN,log-normal turbulence channel model,and ceiling bounce channel model.The simulation results show that the BER performance of the IM/DD-OFDM communication system is enhanced while the fading strength is decreased.The results reveal also that Hamming codes,BCH codes,and convolutional codes achieve better BER performance.Also,two algorithms of channel estimation and equalization are considered and compared.These algorithms include the Least Squares(LS)and the Minimum Mean Square Error(MMSE).The simulation results show that the MMSE algorithm gives better BER performance than the LS algorithm.

High Speed Electro-Absorption Modulators for Digital and Analog Optical Fiber Communications

An electro-absorption(EA)modulator is one of key components for optical fiber communications due to the high speed,small size,low voltage and integration ability with other semiconductor devices.A 40 Gb/s InGaAsP/InP multiplequantum-well(MQW)EA modulator monolithically integrated with a semiconductor optical amplifier(SOA)was fabricated for digital communications.The modulator capacitance was reduced to obtain 40 GHz bandwidth,and the SOA section helped reduce the insertion loss from 18 dB to 3 dB.InGaAlAs/InP MQW EA modulators have also been fabricated and characterized for analog optical fiber communications.A low driving voltage of 2.7 V and high spurious free dynamic range of 107 dB·Hz2/3 were estimated by static and dynamic measurements.

Acquisition performance analysis for intersatellite optical communications with vibration influence

A stable and accurate pointing,acquisition system is an important part of initially building intersatellite optical communication links.Satellite platform vibration can cause the system instability and reduce the system precision in building and maintenance of a satellite optical communication system.In this paper,vibration influence is consciously discussed by acquisition time for intersatellite optical communications.Analytical expression of acquisition possibility is derived,taking the scan parameters and platform vibration into account,and vibration influence on the multi-scan acquisition time is also presented.The theoretical result calculated by the proposed analytical expression is approximate to the result by the Monte Carlo simulation.

Vehicle Positioning Based on Optical Camera Communication in V2I Environments

Demand for precise vehicle positioning(VP)increases as autonomous vehicles have recently been drawing attention.This paper proposes a scheme for positioning vehicles on the move based on optical camera communication(OCC)technology in the vehicle-to-infrastructure(V2I)environment.Light-emitting diode(LED)streetlights and vehicle cameras are used as transmitters and receivers respectively.Regions of streetlights are detected and traced by examining images that are obtained from cameras of vehicles.Then,a scheme for analyzing visible light data extracted from the images is proposed.The proposed vehicle positioning scheme uses information on angles between vectors that are formed under the collinearity conditions between the absolute coordinates of at least three received streetlights,and the coordinates of an image sensor.The experiments are performed under stationary state and moving state at a speed of 5 and 20 km/h.To verify the reliability of the proposed scheme,a comparison is made between the actual and estimated location of the camera in the stationary state.In addition,the path of a moving vehicle and the estimated path of the vehicle are compared to check the performance of the scheme.The performance of the proposed technique is analyzed and experimental demonstration confirms that the proposed OCC-based VP scheme achieves positioning accuracy of under 1 m.

Printable Optical Filters for Visible Optical Communications

The design, production and characterization of tailored printable optical filters for visible optical communications are demonstrated. As result, the average color difference between the specified and the produced filters is 32.6, quantified in terms of CIELAB coordinates.

Equivalent Noise Models in Fiber Optical Communication Systems

An equivalent noise model of optical receiver amplifiers as shown in Fig.1 has been given in many fiber optical communication literatures. It is proved in this paper that this equivalent noise model is neither equivalent to the original one nor measurable. The main reason is that the position of the input impedance in this noise model is not the same with its in the typical noise model,but the same S vn , S in with the typical noise model are used. So the equivalent noise model above is wrong and is not fit to be taken into application.