Controllable optical bistability in a Fabry-Pérot cavity with a nonlinear three-dimensional Dirac semimetal

Optical bistability(OB)is capable of rapidly and reversibly transforming a parameter of an optical signal from one state to another,and homologous nonlinear optical bistable devices are core components of high-speed all-optical communication and all-optical networks.In this paper,we theoretically investigated the controllable OB from a Fabry-Pérot(FP)cavity with a nonlinear three-dimensional Dirac semimetal(3D DSM)in the terahertz band.The OB stems from the third-order nonlinear bulk conductivity of the 3D DSM and the resonance mode has a positive effect on the generation of OB.This FP cavity structure is able to tune the OB because the transmittance and the reflectance can be modulated by the Fermi energy of the 3D DSM.We believe that this FP cavity configuration could provide a reference concept for realizing tunable bistable devices.

Noticeable positive Doppler effect on optical bistability in an N-type active Raman gain atomic system

We theoretically investigate the Doppler effect on optical bistability in an N-type active Raman gain atomic system inside an optical ring cavity. It is shown that the Doppler effect can greatly enhance the dispersion and thus create the bistable behaviour or greatly increase the bistable region, which has been known as the positive Doppler effect on optical bistability. In addition, we find that a positive Doppler effect can change optical bistability from the hybrid dispersion-gain type to a dispersive type.

Optical bistability and multistability in a three-level △-type atomic system under the nonresonant condition

Under a nonresonant condition, we theoretically investigate hybrid absorptive-dispersive optical bistability and multistability behaviours in a three-level △-type system by using a microwave field to drive a hyperfine transition between two upper excited states inside a unidirectional ring cavity. We find that the optical bistability and multistability behaviours can be controlled by adjusting the intensity of the microwave field or the intensity of the coherent coupling field. Furthermore, our studies show an interesting phenomenon of the transition from the optical bistability to the optical multistability only by changing the negative detuning of the coupling field into the positive detuning of the coupling field.

Comparison of absorption dispersion and optical bistability behaviors between open and closed four-level tripod atomic systems

In this paper we investigate the optical properties of an open four-level tripod atomic system driven by an elliptically polarized probe field and compare its properties with the corresponding closed system. Our results reveal that absorption,dispersion, group velocity, and optical bistability of the probe field can be manipulated by adjusting the phase difference between the two circularly polarized components of a single coherent field and cavity parameters, i.e., the atomic exit rate from cavity and atomic injection rates.

Controllable optical bistability in a three-mode optomechanical system with a membrane resonator

We study the optical bistability （OB） in a three-mode cavity optomechanical system, where an oscillating membrane of perfect reflection is inserted between two fixed mirrors of partial transmission. By investigating the behavior of steady state solutions, we find that the left and right cavities will exhibit the bistable behavior simultaneously in this optomechanical system by adjusting the left and right coupling fields. In addition, one can control the OB threshold and the width of the OB curve via adjusting the coupling strength, the detuning, and the decay rate. Moreover, we further illustrate the OB appearing in the cavity by the effective potential as a function of the position.

Controllable optical bistability of Bose-Einstein condensate in an optical cavity with a Kerr medium

We study the optical bistability for a Bose-Einstein condensate of atoms in a driven optical cavity with a Kerr medium. We find that both the threshold point of optical bistability transition and the width of optical bistability hysteresis can be controlled by appropriately adjusting the Kerr interaction between the photons. In particular, we show that the optical bistability will disappear when the Kerr interaction exceeds a critical value.

Control over hysteresis curves and thresholds of optical bistability in different semiconductor double quantum wells

The effects of optical field on the phenomenon of optical bistability(OB) are investigated in a K-type semiconductor double quantum well(SDQW) under various parametric conditions. It is shown that the OB threshold can be manipulated by increasing the intensity of coupling field. The dependence of the shift of OB hysteresis curve on probe wavelength detuning is then explored. In order to demonstrate controllability of the OB in this SDQW, we compare the OB features of three different configurations which could arise in this SDQW scheme, i.e., K-type, Y-type, and inverted Y-type systems. The controllability of this semiconductor nanostructure medium makes the presented OB scheme more valuable for applications in all-optical switches, information storage, and logic circuits of all optical information processing.

Optical bistability induced by quantum coherence in a negative index atomic medium

Bistability behaviors in an optical ring cavity filled with a dense V-type four-level atomic medium are theoretically investigated. It is found that the optical bistability can appear in the negative refraction frequency band, while both the bistability and multi-stability can occur in the positive refraction frequency bands. Therefore, optical bistability can be realized from conventional material to negative index material due to quantum coherence in our scheme.

Influence of Fano interference and incoherent processes on optical bistability in a four-level quantum dot nanostructure

Role of Fano interference and incoherent pumping field on optical bistability in a four-level designed InGaN/GaN quantum dot nanostructure embedded in a unidirectional ring cavity are analyzed. It is found that intensity threshold of optical bistability can be manipulated by Fano interference. It is shown that incoherent pumping fields make the threshold of optical bistability behave differently by Fano interference. Moreover, in the presence of Fano interference the medium becomes phase-dependent. Therefore, the relative phase of applied fields can affect the behaviors of optical bistability and intensity threshold can be controlled easily.

A study of optical properties of a four-level atomic system via vacuum-induced coherence effects

This paper studies the effects of vacuum-induced coherence （VIC） in a four-level atomic system. The effects of VIC lead to the coherent hole burnings exhibited in the system at some certain points of the Rabi frequency. This is also the reason for the enhancement of the coherent population trapping. In addition, optical bistability occurs in the evolution curves of absorption versus the phase of Rabi frequencies.

Optical Fiber Grating Bistability

It is proposed that a segment of Er doped fiber with a couple of fiber gratings on the ends may be used as a novel optical bistability device with low power and high speed. Operation and bistability threshold of device are analysed in accordance with the distributed feedback couple mode theory and the nonlinear characteristic of Er doped fiber. It is shown that a nanoseconds microwatts bistable operation of a centimeter device is realizable under nowaday technological condition.

1.55 μm Wavelength Operation of E_r^(3+) -Doped Optical Fiber Bistability

An all optical all fiber optical bistability operation has been realized in an all fiber cavity consisted with Er doped fiber and optical fiber loop mirrors. The experimental bistability threshold is consistent with the theory.

Influences of control coherence and decay coherence on optical bistability in a semiconductor quantum well

We discuss the influences of two different types of mechanisms of quantum coherence on optical bistability in a semiconductor quantum well structure.In the first mechanism,only quantum coherence induced by the resonant coupling of a strong control laser is considered.In the second mechanism,the decay coherence is taken into account under the condition where the control field is weak.In two different cases,optical bistability can be obtained through choosing appropriate physical parameters.Our studies show quantum coherence makes the optical nonlinear effect of the system become stronger,which takes an important role in the process of generating optical bistability.A semiconductor quantum well with flexibility and easy integration in design could potentially be exploited in real solid-state devices.

High contrast all-optical diode based on direction-dependent optical bistability within asymmetric ring cavity

We propose a simple all-optical diode which is comprised of an asymmetric ring cavity containing a two-level atomic ensemble. Attributed to spatial symmetry breaking of the ring cavity, direction-dependent optical bistability is obtained in a classical bistable system. Therefore, a giant optical non-reciprocity is generated, which guarantees an all-optical diode with a high contrast up to 22 d B. Furthermore, its application as an all-optical logic AND gate is also discussed.

Optical bistability and multistability via double dark resonance in graphene nanostructure

Electrons in graphene nanoribbons can lead to exceptionally strong optical responses in the infrared and terahertz regions owing to their unusual dispersion relation.Therefore,on the basis of quantum optics and solid-material scientific principles,we show that optical bistability and multistability can be generated in graphene nanostructure under strong magnetic field.We also show that by adjusting the intensity and detuning of infrared laser field,the threshold intensity and hysteresis loop can be manipulated efficiently.The effects of the electronic cooperation parameter which are directly proportional to the electronic number density and the length of the graphene sample are discussed.Our proposed model may be useful for the nextgeneration all-optical systems and information processing based on nano scale devices.

Optical bistability and multistability in a defect slab doped by GaAs/AlGaAs multiple quantum wells

We proposed a new model for controlling the optical bistability（OB） and optical multistability（OM） in a defect slab doped with four-level GaAs/AlGaAs multiple quantum wells with 15 periods of 17.5 nm GaAs wells and 15-nm Al_（0.3）Ga_（0.7）As barriers. The effects of biexciton energy renormalization, exciton spin relaxation, and thickness of the slab on the OB and OM properties of the defect slab were theoretically investigated. We found that the transition from OB to OM or vice versa is possible by adjusting the controllable parameters in a lab. Moreover, the transmission, reflection, and absorption properties of the weak probe light through the slab were also discussed in detail.

Hybrid Fiber Optical Bistability and Optical Signal Procesing

A hybrid fiber optical bistable device with electrical feedback has been proposed and analyzed.Bistability operation and some applications for optical signal processing have been realized experimentally .

E_r^3+-doped Fiber Optical Bistability by Ar^+-laser

s:Under The nonlinear optics condition the all-fiber optical bistability operation has been realized in an all-fiber resonator consisted of Er-dope fiber and optical fiber couplers.The experimental bistability threshold is consistent with the theory.

Nonlinear Optical Fiber Resonator:Optical Fiber Bistability

The linear and nonlinear charecteristics of verious optical riber loop resonators have been processed uniformly using transmission matrix method. It is pointed that in nonlinear operation condition each of those optical fiber loop resonators may be used to make an all-optical fiber bistabillty device.The configuration,charecterictics and threshold of verious Er-doped fiber loop bistability devices have been calculated,analysised, and compared, and the design principle of those devices has been given.

Optical Switching and Digital Signal Amplification Using an Optical Fiber Grating OBD

It is proposed that an optical fiber grating bistability device may be used for an all optical switching or an all optical digital signal amplifier with low power and high speed. The principle, characteristic and paremeter are analysed, and some design ideas are given.