The advantages of the all-fiber optical current transformer include but are not limited to being small in size,having no magnetic saturation,exhibiting high measurement accuracy,and boasting strong electromagnetic int...The advantages of the all-fiber optical current transformer include but are not limited to being small in size,having no magnetic saturation,exhibiting high measurement accuracy,and boasting strong electromagnetic interference resistance.However,the high cost of the all-fiber optical transformer limits its promotion and application in engineering.This paper proposes a design scheme of an independent double acquisition loop for the all-fiber optical current transformer based on the single optical path.Firstly,based on the closed-loop control mode and open-loop control mode,the twochannel sampling signal demand for relay protection,and the independent dual-acquisition loop design scheme of the all-fiber optical current transformer are proposed.Secondly,the reliability and economic feasibility of the scheme are demonstrated by an analysis of system failure and cost.The results show that the scheme can actualize the acquisition function of two independent all-fiber optical current transformer products on a single all-fiber current transformer in an integrated manner,which greatly reduces the cost of the all-fiber optical current transformer in engineering applications.展开更多
Based on the transverse electro-optic effect of lithium niobate crystal,combined with polarizers and Faraday rotator,this paper presents a collinear closed-loop fiber optic current transformer with spatial non-recipro...Based on the transverse electro-optic effect of lithium niobate crystal,combined with polarizers and Faraday rotator,this paper presents a collinear closed-loop fiber optic current transformer with spatial non-reciprocity modulation method,and the feasibility of the scheme is verified by both the theoretical and experimental evidences.The detection scheme avoids the limitation of the transition time of the sensing fiber coil on the phase modulation frequency,improves the sensitivity and stability of the system,and reduces the volume and cost of fiber optic current transformer.The sawtooth wave modulation scheme is adopted to realize phase bias modulation and feedback modulation through phase shift of sawtooth wave to achieve closed-loop detection effect,which enhances the signal to noise ratio and simplifies demodulation mode.The experimental results show that the current ratio errors measured at room temperature range from 1%to 120%of rated current meet the requirements of national standard GB/T 20840.8-2007 and reach the accuracy level of 0.2S.The temperature stability of the current transformer is also tested,and the ratio error measured at the rated current does not exceed±0.2%in the range of-30℃to 50℃.展开更多
基金supported by the National Natural Science Foundation of China (No. U1866203)
文摘The advantages of the all-fiber optical current transformer include but are not limited to being small in size,having no magnetic saturation,exhibiting high measurement accuracy,and boasting strong electromagnetic interference resistance.However,the high cost of the all-fiber optical transformer limits its promotion and application in engineering.This paper proposes a design scheme of an independent double acquisition loop for the all-fiber optical current transformer based on the single optical path.Firstly,based on the closed-loop control mode and open-loop control mode,the twochannel sampling signal demand for relay protection,and the independent dual-acquisition loop design scheme of the all-fiber optical current transformer are proposed.Secondly,the reliability and economic feasibility of the scheme are demonstrated by an analysis of system failure and cost.The results show that the scheme can actualize the acquisition function of two independent all-fiber optical current transformer products on a single all-fiber current transformer in an integrated manner,which greatly reduces the cost of the all-fiber optical current transformer in engineering applications.
基金This work was supported by the National Natural Science Foundation of China(Grant No.61735011)the Science and the Key Research and Development Program of Hebei Province(Grant No.19251703D)the Local Science and Technology Development Projects of the Central Committee(Grant No.19941708G).
文摘Based on the transverse electro-optic effect of lithium niobate crystal,combined with polarizers and Faraday rotator,this paper presents a collinear closed-loop fiber optic current transformer with spatial non-reciprocity modulation method,and the feasibility of the scheme is verified by both the theoretical and experimental evidences.The detection scheme avoids the limitation of the transition time of the sensing fiber coil on the phase modulation frequency,improves the sensitivity and stability of the system,and reduces the volume and cost of fiber optic current transformer.The sawtooth wave modulation scheme is adopted to realize phase bias modulation and feedback modulation through phase shift of sawtooth wave to achieve closed-loop detection effect,which enhances the signal to noise ratio and simplifies demodulation mode.The experimental results show that the current ratio errors measured at room temperature range from 1%to 120%of rated current meet the requirements of national standard GB/T 20840.8-2007 and reach the accuracy level of 0.2S.The temperature stability of the current transformer is also tested,and the ratio error measured at the rated current does not exceed±0.2%in the range of-30℃to 50℃.
