To obtain excellent performance optical fiber couplers, the structural difference of SiO2 in couplers with different manufacturing techniques was investigated. With 740-FT-IR infrared spectrometric analyzer, the infra...To obtain excellent performance optical fiber couplers, the structural difference of SiO2 in couplers with different manufacturing techniques was investigated. With 740-FT-IR infrared spectrometric analyzer, the infrared absorption spectrum of SiO2 in couplers at different drawing velocities was measured, and two characteristic peaks in the wavenumber range of 6502000 cm-1 were observed. One characteristic peak is at about 943 cm-1, which is （attributed） to Si—O—Si bond asymmetric stretching vibration, the other is at about 773 cm-1, which is attributed to （Si—O—Si） bond symmetric stretching vibration. From the infrared spectrum, it is found that the intensity and wavenumber of the characteristic peaks are related to the manufacturing technique of couplers. The characteristic peak at （about） 943 cm-1 becomes steeper when increasing the drawing velocity. At the drawing velocity of 150 μm/s, the distance between the two characteristic peaks is maximum, and then the optical fiber coupler has excellent performance, indicating that the performance of the optical fiber coupler has a close relationship with the wavenumber of the two characteristic peaks.展开更多
Bi-doped SiO2-Al2O3-GeO2 fiber preforms are prepared by modified chemical vapor deposition （MCVD） and solution doping process. The characteristic spectra of the preforms and fibers are experimentally investigated, a...Bi-doped SiO2-Al2O3-GeO2 fiber preforms are prepared by modified chemical vapor deposition （MCVD） and solution doping process. The characteristic spectra of the preforms and fibers are experimentally investigated, and a distinct difference in emission between the two is observed. Under 808-nm excitation, an ultra-broad near-infrared （NIR） emission with full-width at half-maximum （FWHM） of 495 nm is observed in the Bi-doped fiber. This observation, to our knowledge, is the first in this field. The NIR emission consists of two bands, which may be ascribed to the Bi0 and Bi＋ species, respectively. This Bi-doDed fiber is promising for broadband or）tical amolification and widely tunable laser.展开更多
A major problem of plastic optical fibers(POFs) is large transmission loss in comparison with silica fibers.After adopting a new optical fiber structure,hollow-core Bragg fiber with cobweb-structured cladding,which ca...A major problem of plastic optical fibers(POFs) is large transmission loss in comparison with silica fibers.After adopting a new optical fiber structure,hollow-core Bragg fiber with cobweb-structured cladding,which can suppress the absorption losses of constituent materials by a factor of about 104―106,the problem of POFs with large losses is solved ultimately.With the advantage of flexibility and easy bending,the POFs with this structure can guide light with low transmission loss for information and energy in the wavelength range of visible light to terahertz(THz) wave(0.4―1000 μm).This new generation of POFs will find many applications.展开更多
In this paper, developed wireless portable infrared pyrometer with dual channel fiber optic is described. The pyrometer measures surface temperature in wide infrared spectral range of 2 - 25 um. A data processing algo...In this paper, developed wireless portable infrared pyrometer with dual channel fiber optic is described. The pyrometer measures surface temperature in wide infrared spectral range of 2 - 25 um. A data processing algorithm based on the methods of synchronous detection providing展开更多
Bi-activated photonic materials are promising for various applications in high-capacity telecommunication,tunable laser,and advanced bioimaging and sensing.Although various Bi-doped material candidates have been explo...Bi-activated photonic materials are promising for various applications in high-capacity telecommunication,tunable laser,and advanced bioimaging and sensing.Although various Bi-doped material candidates have been explored,manufacturing of Bi heavily doped fiber with excellent optical activity remains a long-standing challenge.Herein,a novel viscosity evolutional behavior mediated strategy for manufacturing of Bi-doped active fiber with high dopant solubility is proposed.The intrinsic relation among the evolution of Bi,reaction temperature and viscosity of the glass system is established.Importantly,the effective avenue to prevent the undesired deactivation of Bi during fiber drawing by tuning the temperature dependent viscosity evolution is built.By applying the strategy,for the first time we demonstrate the success in fabrication of heavily doped Bi active fiber.Furthermore,the principal fiber amplifier device is constructed and broadband optical signal amplification is realized.Our findings indicate the effectiveness of the proposed temperature dependent viscosity mediated strategy for developing novel photonic active fiber,and they also demonstrate the great potential for application in the next-generation high-capacity telecommunication system.展开更多
文摘To obtain excellent performance optical fiber couplers, the structural difference of SiO2 in couplers with different manufacturing techniques was investigated. With 740-FT-IR infrared spectrometric analyzer, the infrared absorption spectrum of SiO2 in couplers at different drawing velocities was measured, and two characteristic peaks in the wavenumber range of 6502000 cm-1 were observed. One characteristic peak is at about 943 cm-1, which is （attributed） to Si—O—Si bond asymmetric stretching vibration, the other is at about 773 cm-1, which is attributed to （Si—O—Si） bond symmetric stretching vibration. From the infrared spectrum, it is found that the intensity and wavenumber of the characteristic peaks are related to the manufacturing technique of couplers. The characteristic peak at （about） 943 cm-1 becomes steeper when increasing the drawing velocity. At the drawing velocity of 150 μm/s, the distance between the two characteristic peaks is maximum, and then the optical fiber coupler has excellent performance, indicating that the performance of the optical fiber coupler has a close relationship with the wavenumber of the two characteristic peaks.
文摘Bi-doped SiO2-Al2O3-GeO2 fiber preforms are prepared by modified chemical vapor deposition （MCVD） and solution doping process. The characteristic spectra of the preforms and fibers are experimentally investigated, and a distinct difference in emission between the two is observed. Under 808-nm excitation, an ultra-broad near-infrared （NIR） emission with full-width at half-maximum （FWHM） of 495 nm is observed in the Bi-doped fiber. This observation, to our knowledge, is the first in this field. The NIR emission consists of two bands, which may be ascribed to the Bi0 and Bi＋ species, respectively. This Bi-doDed fiber is promising for broadband or）tical amolification and widely tunable laser.
基金the National Natural Science Foundation of China(Grant Nos.60444003,60577009)
文摘A major problem of plastic optical fibers(POFs) is large transmission loss in comparison with silica fibers.After adopting a new optical fiber structure,hollow-core Bragg fiber with cobweb-structured cladding,which can suppress the absorption losses of constituent materials by a factor of about 104―106,the problem of POFs with large losses is solved ultimately.With the advantage of flexibility and easy bending,the POFs with this structure can guide light with low transmission loss for information and energy in the wavelength range of visible light to terahertz(THz) wave(0.4―1000 μm).This new generation of POFs will find many applications.
文摘In this paper, developed wireless portable infrared pyrometer with dual channel fiber optic is described. The pyrometer measures surface temperature in wide infrared spectral range of 2 - 25 um. A data processing algorithm based on the methods of synchronous detection providing
基金support from the National Key R&D Program of China(2020YFB1805901)the National Science Fund for Distinguished Young Scholars(62125502)+7 种基金the National Natural Science Foundation of China(51972113,52302002 and 62305115)the Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program(2017BT01X137)Foshan Science and Technology Innovation Project(1920001000052)the Foundation of State Key Laboratory of Reactor System Design Technologythe Large Scientific Facility Open Subject of Songshan Lake,Dongguan,Guangdongthe Research Project supported by State Key Lab of Luminescent Materials and DevicesSouth China University of Technology(Skllmd2023-07)the Sponsored Research Project of Corning Incorporated。
文摘Bi-activated photonic materials are promising for various applications in high-capacity telecommunication,tunable laser,and advanced bioimaging and sensing.Although various Bi-doped material candidates have been explored,manufacturing of Bi heavily doped fiber with excellent optical activity remains a long-standing challenge.Herein,a novel viscosity evolutional behavior mediated strategy for manufacturing of Bi-doped active fiber with high dopant solubility is proposed.The intrinsic relation among the evolution of Bi,reaction temperature and viscosity of the glass system is established.Importantly,the effective avenue to prevent the undesired deactivation of Bi during fiber drawing by tuning the temperature dependent viscosity evolution is built.By applying the strategy,for the first time we demonstrate the success in fabrication of heavily doped Bi active fiber.Furthermore,the principal fiber amplifier device is constructed and broadband optical signal amplification is realized.Our findings indicate the effectiveness of the proposed temperature dependent viscosity mediated strategy for developing novel photonic active fiber,and they also demonstrate the great potential for application in the next-generation high-capacity telecommunication system.
