Finesse measurement for high-power optical enhancement cavity

Finesse is a critical parameter for describing the characteristics of an optical enhancement cavity(OEC). This paper first presents a review of finesse measurement techniques, including a comparative analysis of the advantages, disadvantages, and potential limitations of several main methods from both theoretical and practical perspectives. A variant of the existing method called the free spectral range(FSR) modulation method is proposed and compared with three other finesse measurement methods, i.e., the fast-switching cavity ring-down(CRD) method, the rapidly swept-frequency(SF) CRD method, and the ringing effect method. A high-power OEC platform with a high finesse of approximately 16000 is built and measured with the four methods. The performance of these methods is compared, and the results show that the FSR modulation method and the fast-switching CRD method are more suitable and accurate than the other two methods for high-finesse OEC measurements. The CRD method and the ringing effect method can be implemented in open loop using simple equipment and are easy to perform. Additionally, recommendations for selecting finesse measurement methods under different conditions are proposed, which benefit the development of OEC and its applications.

A novel indirect optical method for rock stress measurement using microdeformation field analysis

Stress measurement plays a crucial role in geomechanics and rock engineering,especially for the design and construction of large-scale rock projects.This paper presents a novel method,based on the traditional stress relief approach,for indirectly measuring rock stress using optical techniques.The proposed method allows for the acquisition of full-field strain evolution on the borehole’s inner wall before and after disturbance,facilitating the determination of three-dimensional(3D)stress information at multiple points within a single borehole.The study focuses on presenting the method’s theoretical framework,laboratory validation results,and equipment design conception.The theoretical framework comprises three key components:the optical imaging method of the borehole wall,the digital image correlation(DIC)method,and the stress calculation procedure.Laboratory validation tests investigate strain field distribution on the borehole wall under varying stress conditions,with stress results derived from DIC strain data.Remarkably,the optical method demonstrates better measurement accuracy during the unloading stage compared to conventional strain gauge methods.At relatively high stress levels,the optical method demonstrates a relative error of less than 7%and an absolute error within 0.5 MPa.Furthermore,a comparative analysis between the optical method and the conventional contact resistance strain gauge method highlights the optical method’s enhanced accuracy and stability,particularly during the unloading stage.The proposed optical stress measurement device represents a pioneering effort in the application of DIC technology to rock engineering,highlighting its potential to advance stress measurement techniques in the field.

Phase-Based Optical Flow Method with Optimized Parameter Settings for Enhancing Displacement Measurement Adaptability

To enhance the applicability and measurement accuracy of phase-based optical flow method using complex steerable pyramids in structural displacement measurement engineering applications, an improved method of optimizing parameter settings is proposed. The optimized parameters include the best measurement points of the Region of Interest (ROI) and the levels of pyramid filters. Additionally, to address the issue of updating reference frames in practical applications due to the difficulty in estimating the maximum effective measurement value, a mechanism for dynamically updating reference frames is introduced. Experimental results demonstrate that compared to representative image gradient-based displacement measurement methods, the proposed method exhibits higher measurement accuracy in engineering applications. This provides reliable data support for structural damage identification research based on vibration signals and is expected to broaden the engineering application prospects for structural health monitoring.

Plastic optical fiber refractometer for continuous refractive index measurement

This paper investigated the continuous measurement of a refractive index(RI)sensor based on macrobending microoptical plastic fiber(m-POF).The sensing properties of the RI sensor depend on the structure parameter,which is the ratio of macrobending radius of m-POF to the radius of fiber itself.The ratio changes with the measurement time increasing because of the water absorption,which introduces an maximum measurement deviation of 7.3×10^(-5) RIU when the immersion time exceeds 40 h.This work indicates that for the sensors based on POF,the measurement time must be taken into consideration for continuous measurement.

Highly sensitive digital optical sensor with large measurement range based on the dual-microring resonator with waveguide-coupled feedback

We propose a novel high-performance digital optical sensor based on the Mach-Zehnder interferential effect and the dual-microring resonators with the waveguide-coupled feedback. The simulation results show that the sensitivity of the sensor can be orders of magnitude higher than that of aconventional sensor, and high quality factor is not critical in it. Moreover, by optimizing the length of the feedback waveguide to be equal to the perimeter of the ring, the measurement range of the proposed sensor is twice as much as that of the conventional sensor in the weak coupling case.

Simultaneous estimation of aerosol optical constants and size distribution from angular light-scattering measurement signals

The angular light-scattering measurement（ALSM） method combined with an improved artificial bee colony algorithm is introduced to determine aerosol optical constants and aerosol size distribution（ASD） simultaneously. Meanwhile, an optimized selection principle of the ALSM signals based on the sensitivity analysis and principle component analysis（PCA）is proposed to improve the accuracy of the retrieval results. The sensitivity analysis of the ALSM signals to the optical constants or characteristic parameters in the ASD is studied first to find the optimized selection region of measurement angles. Then, the PCA is adopted to select the optimized measurement angles within the optimized selection region obtained by sensitivity analysis. The investigation reveals that, compared with random selection measurement angles, the optimized selection measurement angles can provide more useful measurement information to ensure the retrieval accuracy. Finally,the aerosol optical constants and the ASDs are reconstructed simultaneously. The results show that the retrieval accuracy of refractive indices is better than that of absorption indices, while the characteristic parameters in ASDs have similar retrieval accuracy. Moreover, the retrieval accuracy in studying L-N distribution is a little better than that in studying Gamma distribution for the difference of corresponding correlation coefficient matrixes of the ALSM signals. All the results confirm that the proposed technique is an effective and reliable technique in estimating the aerosol optical constants and ASD simultaneously.

First Evaluation and Frequency Measurement of the Strontium Optical Lattice Clock at NIM

An optical lattice clock based on 87Sr is built at National Institute of Metrology （NIM） of China. The systematic frequency shifts of the clock are evaluated with a total uncertainty of 2.3×10-16. To measure its absolute frequency with respect to NIM＇s cesium fountain clock NIM5, the frequency of a flywheel H-maser of NIM5 is transferred to the Sr laboratory through a 50-kin-long fiber. reference frequency of this H-maser, is used for the optical this Sr clock is measured to be 429228004229873.7（1.4）Hz. A fiber optical frequency comb, phase-locked to the frequency measurement. The absolute frequency of

Magic Wavelength Measurement of the ^(87)Sr Optical Lattice Clock at NIM

We report on the magic wavelength measurement of our optical lattice clock based on fermion strontium atoms at the National Institute of Metrology （NIM）. A Ti：sapphire solid state laser locked to a reference cavity inside a temperature-stabilized vacuum chamber is employed to generate the optical lattice. The laser frequency is measured by an erbium fiber frequency comb. The trap depth is modulated by varying the lattice laser power via an acousto-optic modulator. We obtain the frequency shift coefficient at this lattice wavelength by measuring the diffbrential frequency shift of the clock transition of the strontium atoms at different trap depths, and the frequency shift coefficient at this lattice wavelength is obtained. We measure the frequency shift coefficients at different lattice frequencies around the magic wavelength and linearly fit the measurement data, and the magic wavelength is calculated to be 368554672（44）MHz.

Comparing different light-emitting diodes as light sources for long path differential optical absorption spectroscopy NO_2 and SO_2 measurements

In this paper, we present a comparison of different light-emitting diodes （LEDs） as the light source for long path differential optical absorption spectroscopy （LP-DOAS） atmospheric trace gas measurements. In our study, we use a fiberoptic design, where high power LEDs used as the light source are coupled into the telescope using a Y shape fiber bundle. Two blue and one ultraviolet （UV） LEDs with different emission wavelength ranges are tested for NO2 and SO2 measurements. The detailed description of the instrumental setup, the NO2 and SO2 retrieval procedure, the error analysis, and the preliminary results from the measurements carried out in Science Island, Hefei, Anhui, China are presented. Our first measurement results show that atmospheric NO2 and SO2 have strong temporal variations in that area and that the measurement accuracy is strongly dependent on the visibility conditions. The measured NO2 and SO2 data are compared to the Ozone Monitoring Instrument （OMI） satellite observations. The results show that the OMI NO2 product underestimates the ground level NO2 by 45%, while the OMI SO2 data are highly influenced by clouds and aerosols, which can lead to large biases in the ground level concentrations. During the experiment, the mixing ratios of the atmospheric NO2 and SO2 vary from 8 ppbv to 36 ppbv and from 3 ppbv to 18 ppbv, respectively.

A diode laser spectrometer at 634 nm and absolute frequency measurements using optical frequency comb

This paper reports that two identical external-cavity-diode-laser （ECDL） based spectrometers are constructed at 634nm referencing on the hyperfine B-X transition R（80）8-4 of 127I2. The lasers are stabilized on the Doppler-free absorption signals using the third-harmonic detection technique. The instability of the stabilized laser is measured to be 2.8 × 10^-12 （after 1000 s） by counting the beat note between the two lasers. The absolute optical frequency of the transition is, for the first time, determined to be 472851936189.5 kHz by using an optical frequency comb referenced on the microwave caesium atomic clock. The uncertainty of the measurement is less than 4.9 kHz.

Repeatability of in-vitro optical quality measurements of intraocular lenses with a deflectometry technique effect of the toricity

AIM： To evaluate the repeatability of an optical device for measuring the Zernike coefficients of toric intraocular lenses（IOLs） and assess whether its toricity has any impact in its repeatability. METHODS： An experienced technician used the NIMO TR1504 to measure the Zernike coefficients 30 times for an aperture of 4.50 mm for all lenses included. The IOLs included were divided into two group： toric and nontoric ones. The cylindrical powers of the toric lenses included in the present study were 1.00, 1.50, 2.25, 3.00 and 3.75 D. Finally, the repeatability of the NIMO TR1504 was described in terms of within subject standard deviation（Sw） and repeatability limit. RESULTS： The Sw was smaller than 0.011 μm for both lens groups and all Zernike coefficients, and the difference between both groups was smaller than 0.004 μm for all Zernike coefficients. Regarding the repeatability limit, this value was smaller than 0.025 μm for the toric lens group, and smaller than 0.031 μm for the non-toric lens one for all Zernike coefficients. Furthermore, the maximum difference between both lens groups was 0.010 μm. CONCLUSION： The repeatability of the NIMO TR1504 to measure the optical quality is high and independent of the lens toricity. These results reflect that this system is robust and could be used to measure the in-vitro optical quality of either toric or non-toric IOLs.

Instantaneous frequency measurement using two parallel I/Q modulators based on optical power monitoring

A scheme for instantaneous frequency measurement(IFM)using two parallel I/Q modulators based on optical power monitoring is proposed.The amplitude comparison function(ACF)can be constructed to establish the relationship between the frequency of radio frequency(RF)signal and the power ratio of two optical signals output by two I/Q modulators.The frequency of RF signal can be derived by measuring the optical power of the optical signals output by two I/Q modulators.The measurement range and measurement error can be adjusted by controlling the delay amount of the electrical delay line.The feasibility of the scheme is verified,and the corresponding measurement range and measurement error of the system under different delay amounts of the electrical delay line are given.Compared with previous IFM schemes,the structure of this scheme is simple.Polarization devices,a photodetector and an electrical power meter are not used,which reduces the impact of the environmental disturbance on the system and the cost of the system.In simulation,the measurement range can reach 0 GHz-24.5 GHz by adjusting the delay amount of the electrical delay lineτ=20 ps.The measurement error of the scheme is better at low frequency,and the measurement error of low frequency 0 GHz-9.6 GHz can reach-0.1 GHz to+0.05 GHz.

EFFICIENT FITTING RANGE FOR GLUCOSE MEASUREMENT WITH OPTICAL COHERENCE TOMOGRAPHY

Studies of non-invasive glucose measurement with optical coherence tomography(OCT)in tissue-simulating phantoms and biological tissues show that glucose has an effect on the OCT signal slope.Choosing an efficient fitting range to calculate the OCT signal slope is important because it helps to improve the precision of glucose measurement.In this paper,we study the problem in two ways:(1)scattering-induced change of OCT signal slope versus depth in intralipid suspensions with different concentrations based on Monte Carlo(MC)simulations and experiments and(2)efficient fitting range for glucose measurement in 3%and 10%intralipid.The results show that the OCT signal slope expresses a contrary change with scattering coefficient below a certain depth in high intralipid concentrations,so that there is an effective fitting depth.With an efficient fitting range from 100μm to the effective fitting depth,the precision of glucose measurement can be 4.4mM for 10%intralipid and 2.2mM for 3%intralipid.

Autonomous optical navigation of Mars probe aided by one-way Doppler measurements in capture stage

The optical navigation errors of Mars probe in the capture stage depend closely on which targets are selected to be observed in the Mars system.As for this problem,an integrated navigation scheme is proposed wherein the optical observation is aided by one-way Doppler measurements.The errors are then analyzed respectively for the optical observation and one-way Doppler measurements.The real-time calculating scheme which exploits the extended Kalman filter(EKF)framework is designed for the integrated navigation.The simulation tests demonstrate that the errors of optical navigation,which select the Mars moon as the observation target,are relatively smaller than those in the Mars-orientation optical navigation case.On one hand,the integrated navigation errors do not depend on the selecting pattern of optical observation targets.On the other hand,the integrated navigation errors are significantly reduced as compared with those in the optical-alone autonomous navigation mode.

Real Time Derivation of Atmospheric Aerosol Optical Properties by Concurrent Measurements of Optical and Sampling Instruments

The understanding of aerosol properties in troposphere, especially their behavior near the ground level, is indispensable for precise evaluation of their impact on the Earth’s radiation studies. Although a sunphotometer or a skyradiometer can provide the aerosol optical thickness (AOT), their application is limited to daytime under near cloud free conditions. In order to attain the multi-wavelength observation for both day- and night-time including cloudy conditions, here we propose a novel monitoring technique by means of simultaneous measurement using a nephelometer (450, 550, and 700 nm), an aethalometer (370, 470, 520, 590, 660, 880, and 950 nm), and a visibility meter (550 nm). On the basis of the multi-wavelength data of scattering and absorption coefficients from the nephelometer and aethalometer, respectively, first we calculate the real-time values of aerosol extinction coefficient in addition to the Angstrom exponent (AE). Then, correction of these values is carried out by comparing the resulting extinction coefficient with the corresponding value obtained from the optical data of visibility-meter. The major reason for this correction is the loss of relatively coarse particles due to the aerodynamic effect as well as evaporation of water content from particles during the sampling procedure. Then, with the ancillary data of vertical aerosol profile obtained with a lidar (532 nm), the temporal change of AOT is estimated. In this way, information from the sampling can be converted to the ambient properties in the atmospheric boundary layer. Furthermore, daytime data from a sunphotometer (368, 500, 675, and 778 nm) and a skyradiometer (340, 380, 400, 500, 675, 870, and 1020 nm) are used to validate the resulting AOT values. From the overall procedure, we can estimate the AE and AOT values from the sampling data, with uncertainties of approximately 5% for AE and 10% for AOT. Such a capability will be useful for studying aerosol properties throughout 24 hours regardless of the solar radiation and cloud coverage.

Laboratory demonstration of geopotential measurement using transportable optical clocks

We report an experimental demonstration of geopotential difference measurement using a pair of transportable ^(40)Ca^(+) optical clocks(TOC-729-1 and TOC-729-3)in the laboratory,each of them has an uncertainty of 1.3×10^(−17) and an instability of 4.8×10^(−15)/√τ.Referenced to a stationary clock of TOC-729-1,the geopotential difference measurements are realized by moving TOC-729-3 to three different locations and the relevant altitude differences are measured with uncertainties at the level of 20 cm.After correcting the systematic shifts(including gravitational red shift),the two-clock frequency difference is measured to be–0.7(2.2)×10^(−17),considering both the statistic(1.0×10^(−17))and the systematic(1.9×10^(−17))uncertainties.The frequency difference between these two clocks is within their respective uncertainties,verifying the reliability of transportable ^(40)Ca^(+) optical clocks at the low level of 10^(−17).

Erratum and Note: Measurement of Zeeman Shift of Cesium Atoms Using an Optical Nanofiber [Chin. Phys. Lett. 35(2018) 083201]

Our recent article (Chin. Phys. Lett. 35 (2018)083201) measured the Zeeman shift of cesium atoms using an optical nanofiber. Before our work, Watkins et al.(Ref.[17] in our article) had demonstrated the Zeeman shift also using an optical nanofiber in rubidium atoms. Watkins et al. reported on the observation

Simultaneous Measurements of Coal Ash Composition by Laser-induced Breakdown Spectroscopy in Different Optical Collection

针对燃煤组分分布不均匀的特性，研究不同收光模式对激光诱导击穿光谱技术同步测量灰成分的影响。选用具有不同灰成分含量梯度的燃煤样品作为检测对象，对比分析同向收光和侧向收光下灰成分组成元素谱线信号探测的强度和稳定性及SiO2、Al2O3、Fe2O3、CaO、MgO和TiO2含量定量分析的精确度。研究结果表明，相同实验条件下同向收光模式的光谱信号稳定性和定量分析精确度更好，检验样品中各灰成分的预测值和参考值之间的拟合度均在0．986以上。而侧向收光模式下探测到的光谱信号强度更强，光谱探测下限可以达到190nm。

A Dual-Mode Bow Tie Optical Fiber Sensor for Measurement of Axial Strain

An optical fiber strain sensor utilizing the mode-mode interference of LP01x, and LPJ11x modes in bow tie optical fibers is described. The heterodyne interference caused by frequency modulation of laser diode (LD) with ramp injection current is used to realize the detection of linear phase. Experimental results show a resolution of about 2% of one fringe corresponding to a strain of 2.9m.

A method for phase reconstruction in optical three-dimensional shape measurement

In optical three-dimensional shape measurement, a method of improving the measurement precision for phase reconstruction without phase unwrapping is analyzed in detail. Intensities of any five consecutive pixels that lie in the x-axis direction of the phase domain are given. Partial derivatives of the phase function in the x- and y-axis directions are obtained with a phase-shifting mechanism, the origin of which is analysed. Furthermore, to avoid phase unwrapping in the phase reconstruction, we derive the gradient of the phase function and perform a two-dimensional integral along the x- and y-axis directions. The reconstructed phase can be obtained directly by performing numerical integration, and thus it is of great convenience for phase reconstruction. Finally, the results of numerical simulations and practical experiments verify the correctness of the proposed method.