Geometric positioning integrating optical satellite stereo imagery and a global database of ICESat-2 laser control points:A framework and key technologies

Block Adjustment(BA)is one of the essential techniques for producing high-precision geospatial 3D data products with optical stereo satellite imagery.For block adjustment with few ground-control points or without ground control,the vertical error of the model is the decisive factor that constrains the accuracy of 3D data products.The elevation data obtained by spaceborne laser altimeter have the advantages of short update periods,high positioning precision,and low acquisition cost,providing sufficient data support for improving the elevation accuracy of stereo models through the combined BA.This paper proposes a geometric positioning model based on the integration of Optical Satellite Stereo Imagery(OSSI)and spaceborne laser altimeter data.Firstly,we elaborate the principle and necessity of this work through a literature review of existing methods.Then,the framework of our geo-positioning models.Secondly,four key technologies of the proposed model are expounded in order,including the acquisition and management of global Laser Control Points,the association of LCPs and OSSI,the block adjustment model combining LCPs with OSSI,and the accuracy estimation and quality control of the combined BA.Next,the combined BA experiment using Ziyuan-3(ZY-3)OSSI and ICESat-2 laser data was carried out at the testing site in Shandong Province,China.Experimental results prove that our method can automatically select LCPs with high accuracy.The elevation deviation of the combined BA eventually achieved the Mean Error(ME)of 0.06 m and the Root Mean Square Error(RMSE)of 1.18 m,much lower than the ME of 13.20 m and the RMSE of 3.88 m before the block adjustment.A further research direction will be how to perform more adequate accuracy analysis and quality control using massive laser points as checkpoints.

Effects of CaO on Precipitation Morphology of Metallic Iron in Reduction of Iron Oxides Under CO Atmosphere

Growth process of iron whiskers and mechanism of CaO influence on precipitation morphology of metallic iron at the gas-solid interfaces was studied. Analytical reagents of Fe（NO3）3 and Ca（NO3）2 aqueous solution were used to prepare sheet film sample of Fe2 O3-CAO by thermal decomposition at high temperature. In-situ observation was con-ducted using a stereo optical microscope and a hot-stage. And reduction kinetics of samples was studied by thermo gravimetrie （TG） method. Some samples after reduction were analyzed by using the scanning electron microscope （SEM）, energy dispersive spectrometer （EDS） and fourier transform infrared （FT-IR） spectrometer. Results indi-cate that during the reduction of iron oxides with CO, metallic iron is mostly precipitated as whisker and the precipi- tation behavior mainly depends on reduction rate. Doping CaO can significantly increase the reduction rate and effec-tively change the precipitation morphology of metallic iron after the reduction. When CaO doping concentration is less than 4% （mass percent）, CaO can promote whisker formation of reduced iron; as it reaches 6% （mass per- cent）, CaO inhibits iron whiskers growth; as it is more than 8% （mass percent）, no whiskers could be observed. Therefore, controlling the quantity of Ca^2＋ is effective to control the formation and growth of iron whiskers during gaseous reduction and thus eliminating ore grain sticking caused by intertexture of iron whiskers.