Designs of 3D Mesh and Torus Optical Network-on-Chips:Topology,Optical Router and Routing Module

As a nanometer-level interconnection,the Optical Network-on-Chip(ONoC)was proposed since it was typically characterized by low latency,high bandwidth and power efficiency. Compared with a 2-Dimensional(2D)design,the 3D integration has the higher packing density and the shorter wire length. Therefore,the 3D ONoC will have the great potential in the future. In this paper,we first discuss the existing ONoC researches,and then design mesh and torus ONoCs from the perspectives of topology,router,and routing module,with the help of 3D integration. A simulation platform is established by using OPNET to compare the performance of 2D and 3D ONoCs in terms of average delay and packet loss rate. The performance comparison between 3D mesh and 3D torus ONoCs is also conducted. The simulation results demonstrate that 3D integration has the advantage of reducing average delay and packet loss rate,and 3D torus ONoC has the better performance compared with 3D mesh solution. Finally,we summarize some future challenges with possible solutions,including microcosmic routing inside optical routers and highly-efficient traffic grooming.

Progress and realization platforms of dynamic topological photonics

Dynamic topological photonics is a novel research field, combining the time-domain optics and topological physics.In this review, the recent progress and realization platforms of dynamic topological photonics have been well introduced.The definition, measurement methods and the evolution process of the dynamic topological photonics are demonstrated to better understand the physical diagram. This review is meant to bring the readers a different perspective on topological photonics, grasp the advanced progress of dynamic topology, and inspire ideas about future prospects.

Measuring Topological Charges of Optical Vortices with Multi-Singularity Using a Cylindrical Lens

We present a simple method to measure the topological charges of optical vortices with multiple singularities. Using a cylindrical lens, a vortex beam can decay into a light field distribution with multiple separated dark holes, whose number just equals the topological charge of the input beam. This conclusion is then verified via experiments and numerical simulations of the propagation of vortex beams with multiple singulaxities. This method is also reliable to measure the topological charges of broadband vortex beams with different distributions of singularities, which does not resort to multiple beam interferometrie experiments.

Effect of disorders on topological phases in one-dimensional optical superlattices

In a recent paper, Lang et al. proposed that edge states and topological phases can be observed in one-dimensional optical superlattices. They showed that the topological phases can be revealed by observing the density profile of a trapped fermion system, which displays plateaus with their positions. However, disorders are not considered in their model. To study the effect of disorders on the topological phases, we introduce random potentials to the model for optical superlattcies.Our calculations show that edge states are robust against the disorders. We find the edge states are very sensitive to the number of the sites in the optical superlattice and we propose a simple rule to describe the relationship between the edge states and the number of sites. The density plateaus are also robust against weak disorders provided that the average density is calculated over a long interval. The widths of the plateaus are proportional to the widths of the bulk energy gaps when there are disorders. The disorders can diminish the bulk energy gaps. So the widths of the plateaus decrease with the increase of disorders and the density plateaus disappear when disorders are too strong. The results in our paper can be used to guide the experimental detection of topological phases in one-dimensional systems.

Enhanced Property of Thin Cuprous Oxide Film Prepared through Green Synthetic Route

Thin cuprous oxide films have been prepared by chemical vapor deposition(pulsed spray evaporation-chemical vapor deposition)method without post-treatment.The synthesis of cuprous oxide was produced by applying a water strategy effect.Then,the effect of water on the morphology,topology,structure,optical properties and surface composition of the obtained films has been comprehensively investigated.The results reveal that a pure phase of Cu2O was obtained.The introduction of a small quantity of water in the liquid feedstock lowers the band gap energy from 2.16 eV to 2.04 eV.This finding was mainly related to the decrease of crystallite size due to the effect of water.The topology analyses,by using atomic force microscope,also revealed that surface roughness decreases with water addition,namely more uniform covered surface.Moreover,theoretical calculations based on density functional theory method were performed to understand the adsorption and reaction behaviors of water and ethanol on the Cu2O thin film surface.Formation mechanism of the Cu2O thin film was also suggested and discussed.

High-harmonic-generation-inspired preparation of optical vortex arrays with arbitrary-order topological charges

In the process of high-harmonic generation with a Laguerre-Gaussian （LG） mode, it was well established that the topological charge could be of an N-fold increase due to angular momentum conservation. Here, by mimicking the effect of high-harmonic generation, we devise a simple algorithm to generate optical vortex arrays carrying arbitrary topological charges with a single phase-only spatial light modulator. By initially preparing a coaxial superposition of suitable low-order LG modes, we demonstrate experimentally that the topological charges of the embedded vortices can be multiplied and transformed into arbitrarily high orders on demand, while the array structure remains unchanged. Our algorithm offers a concise way to efficiently manipulate the structured light beams and holds promise in optical micromanipulation and remote sensing.