Investigating Optical Transport Network Performance:A Recurrence Plot Approach

In future optical transport networks,lightpath performance analysis is of great practical significance for fully automated management.In general,the quality of transmission(QoT)of lightpaths,measured by optical quality factor or optical signal-to-noise ratio,has a complex time-varying process,along with the interactions of the other lightpath state parameters(LSPs),such as transmit power,chromatic dispersion,polarization mode dispersion.Current studies are mostly focused on lightpath QoT estimation,but ignoring lightpath-level data analytics.In this case,our article proposes a novel lightpath performance analysis method considering recurrence plot(RP)and cross recurrence plot(CRP).Firstly,we give a detailed interpretation on the recurrence patterns of LSPs via a qualitative 2-D RP representation and its quantitative measure.It can potentially enable the accurate and fast lightpath failure detection with a low computational burden.On the other hand,CRP is devoted to modeling the relationships between lightpath QoT and LSPs,and the correlation degree is determined by a geometric mean of multiple indexes of cross recurrence quantification analysis.From the view of application,such CRP analysis can provide the effective knowledge sharing to guarantee more credible QoT prediction.Extensive experiments on a real-world optical network dataset have clearly demonstrated the effectiveness of our proposal.

Evolution of Optical Transport Networks and Their Solution in 3G Networks

As new generation mobile networks, 3G networks focus on data services and integrate voice, data and multimedia services. However, traditional Optical Transport Networks (OTNs) cannot meet the requirements of 3G networks anymore, because of their complicated configuration, low bandwidth efficiency, high cost, and bad network and service scalability. The emerging of Multi-Service Transport Platform (MSTP), Wavelength Division Multiplexing (WDM), and Automatically Switched Optical Network (ASON) technologies for optical fiber communications makes up for these weaknesses. The leading solution to 3G access transport networks is the MSTP technology based on Synchronous Digital Hierarchy (SDH), while that to 3G core transport network is ASON+WDM.

Laboratory demonstration of geopotential measurement using transportable optical clocks

We report an experimental demonstration of geopotential difference measurement using a pair of transportable ^(40)Ca^(+) optical clocks(TOC-729-1 and TOC-729-3)in the laboratory,each of them has an uncertainty of 1.3×10^(−17) and an instability of 4.8×10^(−15)/√τ.Referenced to a stationary clock of TOC-729-1,the geopotential difference measurements are realized by moving TOC-729-3 to three different locations and the relevant altitude differences are measured with uncertainties at the level of 20 cm.After correcting the systematic shifts(including gravitational red shift),the two-clock frequency difference is measured to be–0.7(2.2)×10^(−17),considering both the statistic(1.0×10^(−17))and the systematic(1.9×10^(−17))uncertainties.The frequency difference between these two clocks is within their respective uncertainties,verifying the reliability of transportable ^(40)Ca^(+) optical clocks at the low level of 10^(−17).

Comparison of Optical Transport Schemes for LMDS with Optical Fiber Backbone

We investigate and compare the performance of four optical transport schemes for distributing Local Multipoint Distribution Service (LMDS) signals using an optical fiber backbone.

A Quantum Chemical Screening of Two Imidazole-Chalcone Hybrid Ligands and Their Pd, Pt and Zn Complexes for Charge Transport and Nonlinear Optical (NLO) Properties: A DFT Study

A quantum chemical screening of two imidazole-based chalcone ligands: 2- [1-(3-(1H-imidazol-1-yl)propylimino)-3-(phenylallyl)]phenol and 2-[1-(3-(1H- imidazol-1-yl)propylimino)-3-4-nitrophenylallyl]phenol (hereinafter referred to as HL1 and HL2 respectively) and their Pd, Pt and Zn chelates for charge transport and nonlinear optical (NLO) properties, is reported via dispersion- corrected density functional theory (DFT-D3) and time-dependent DFT (TD- DFT) methods. From our results, Pd and Pt complexes have been observed to show excellent hole-transport properties, owing to their very small reorganization energies. The light extraction efficiency of the HL1-Pt complex was deduced to be particularly impressive, thus suitable for the manufacture of hole transport layer in violet light emitting diodes (LEDs). Moreover, redox potentials and chemical stability studies have enabled us to validate the greater stability in moisture (towards oxidation), of HL2 complexes compared to their HL1 counterparts. The first and second hyperpolarizabilities of both ligands and their complexes have been found to be outstandingly higher than those of the push-pull prototypical, para-nitroaniline by factors of up to 12 in the case of HL2. These compounds, with the exception of the HL2-Pt complex, are thus interesting candidates having wide transparency tradeoffs for NLO efficiency in the manufacture of optoelectronic and photonic devices capable of second and third-order NLO response. Finally, metal chelation has been established to enhance the NLO response of all the chalcone-based imidazole ligands investigated as a result of metal-ligand charge transfer and ligand- metal charge transfer electronic transitions identified in the resulting complexes with the exception of the zinc complexes.

Multifunctional single-fiber optical tweezers for particle trapping and transport

We present and demonstrate a multifunctional single-fiber optical tweezer for particle trapping and transport.The fiber probe of fiber optical tweezers is constructed as a planar structure.Laser sources with wavelengths of 650 nm and 980 nm in a single-mode fiber excite the linearly polarized LP11mode and LP01mode beams,respectively.These two laser beams can achieve non-contact trapping and long-distance transport of particles after passing through a flat-facet fiber probe,respectively.This structure makes it possible to perform non-contact trapping and transport of particles by combining multiple wavelengths and multiple modes.

Controllable single-photon transport in an optical waveguide coupled to an optomechanical cavity with a V-type three-level atom

An optomechanical cavity embedded with a V-type three-level atom is exploited to control single-photon transport in a one-dimensional waveguide. The effects of the atom–cavity detuning, the optomechanical effect,the coupling strengths between the cavity and the atom or the waveguide, and the atomic dissipation on the single-photon transport properties are analyzed systematically. Interestingly, the single-photon transmission spectra show multiple double electromagnetically induced transparency. Moreover, the double electromagnetically induced transparency can be switched to a single one by tuning the atom–cavity detuning.

2 Tbit/s based coherent wavelength division multiplexing passive optical network for 5G transport

Future high-speed mobile communication systems require low latency and high capacity networks.Coherent wavelength division multiplexing(WDM)passive optical network(PON)scheme is expected to play a vital role in these systems.In this paper,coherent WDM-PON scheme based on dual-polarization 16-quadrature amplitude modulation(DP-16 QAM)transceiver has been investigated.The aim of this scheme is to build a 2 Tbit/s(125 Gbit/s/λ×16 wavelengths)network that will be used in the construction of the transport architecture of fifth generation(5 G)and beyond 5 G(B5 G)cellular networks either in mobile front haul(MFH)or mobile back haul(MBH).The results indicate that the proposed scheme is very adequate for both 5 G and B5 G cellular networks requirements.

Rational Design of Star-shaped Molecules with Benzene Core and Naphthalimide Derivatives End Groups as Organic Light-emitting Materials

A series of star-shaped molecules with benzene core and naphthalimides derivatives end groups have been designed to explore their optical,electronic,and charge transport properties as charge transport and/or luminescent materials for organic light-emitting diodes（OLEDs）. The frontier molecular orbitals（FMOs） analysis has turned out that the vertical electronic transitions of absorption and emission are characterized as intramolecular charge transfer（ICT）. The calculated results show that the optical and electronic properties of star-shaped molecules are affected by the substituent groups in N-position of 1,8-naphthalimide ring. Our results suggest that star-shaped molecules with n-butyl（1）,benzene（2）,thiophene（3）,thiophene S？,S？-dioxide（4）,benzo[c][1,2,5]thiadiazole（5）,and 2,7a-dihydrobenzo[d]thiazole（6） fragments are expected to be promising candidates for luminescent and electron transport materials for OLEDs. This study should be helpful in further theoretical investigations on such kind of systems and also to the experimental study for charge transport and/or luminescent materials for OLEDs.

Analysis of the origin of peak aerosol optical depth in springtime over the Gulf of Tonkin

By aggregating MODIS（moderate-resolution imaging spectroradiometer） AOD（aerosol optical depth） and OMI（ozone monitoring instrument） UVAI（ultra violet aerosol index）datasets over 2010–2014, it was found that peak aerosol loading in seasonal variation occurred annually in spring over the Gulf of Tonkin（17–23°N, 105–110°E）. The vertical structure of the aerosol extinction coefficient retrieved from the spaceborne lidar CALIOP（cloud-aerosol lidar with orthogonal polarization） showed that the springtime peak AOD could be attributed to an abrupt increase in aerosol loading between altitudes of 2 and 5 km.In contrast, aerosol loading in the low atmosphere（below 1 km） was only half of that in winter. Wind fields in the low and high atmosphere exhibited opposite transportation patterns in spring over the Gulf of Tonkin, implying different sources for each level. By comparing the emission inventory of anthropogenic sources with biomass burning, and analyzing the seasonal variation of the vertical structure of aerosols over the Northern Indo-China Peninsula（NIC）, it was concluded that biomass burning emissions contributed to high aerosol loading in spring. The relatively high topography and the high surface temperature in spring made planetary boundary layer height greater than 3 km over NIC. In addition, small-scale cumulus convection frequently occurred, facilitating pollutant rising to over 3 km, which was a height favoring long-range transport. Thus, pollutants emitted from biomass burning over NIC in spring were raised to the high atmosphere, then experienced long-range transport, leading to the increase in aerosol loading at high altitudes over the Gulf of Tonkin during spring.

Theoretical and experimental studies of the transport process of micro-particles in static water

A theoretical model is established in this paper to investigate the micro-particle behavior in the static water. The forces acting on the micro-particles are analyzed to obtain a description of the micro-particle behavior in the static water. It is shown that the velocity of the micro-particles is a function of the diameter of the micro-particles, the density of the fluid and the micro-particles, the viscosity and the time. The micro-particle＇s motion undergoes an accelerating period and a constant velocity period, and the acceleration period of small micro-particles is very short, its velocity is much smaller than that of larger ones. The net flux of a control-volume in the flow field is calculated combined with the Fick Law. It is shown that the transport coefficient is a function of the diameter of the micro-particles, the density of the fluid and the micro-particles, the viscosity and the temperature. The transport of smaller particles is more extended than the larger ones. The digital holography technology is applied to detect the micro-particle＇s motion and the comparison between the theoretical solution and the experimental results is made, with a quantitative agreement between them.

Forecasting of Asian dust storm that occurred on May 10-13, 2011, using an ensemble-based data assimilation system

An ensemble-based assimilation system that used the MASINGAR ink-2 （Model of Aerosol Species IN the Global AtmospheRe Mark 2） dust forecasting model and satellite-derived aerosol optical thickness （AOT） data. processed in the JAXA （Japan Aerospace Exploration Agency） Satellite Monitoring for Environmental Studies （JASMES） system with MODIS （Moderate Resolution Imaging Spectroradiometer） observations. was used to quantify the impact of assimilation on forecasts of a severe Asian dust storm during May 10-13. 2011. The modeled bidirectional reflectance function and observed vegetation index employed in JASMES enable AOT retrievals in areas of high surface reflectance, making JASMES effective for dust forecasting and early warning by enabling assimilations in dust storm source regions. Forecasts both with and without assimilation were validated using PM^0 observations from China, Korea, and Japan in the TEMM WG1 dataset. Only the forecast with assimilation successfully captured the contrast between the core and tail of the dust storm by increasing the AOT around the core by 70-150% and decreasing it around the tail by 20-30% in the 18-h forecast. The forecast with assimilation improved the agreement with observed PMlo concentrations, but the effect was limited at downwind sites in Korea and Japan because of the lack of observational constraints for a mis-forecasted dust storm due to cloud.