Optimal state and branch sequence based parameter estimation of continuous hidden Markov model

A parameter estimation algorithm of the continuous hidden Markov model isintroduced and the rigorous proof of its convergence is also included. The algorithm uses theViterbi algorithm instead of K-means clustering used in the segmental K-means algorithm to determineoptimal state and branch sequences. Based on the optimal sequence, parameters are estimated withmaximum-likelihood as objective functions. Comparisons with the traditional Baum-Welch and segmentalK-means algorithms on various aspects, such as optimal objectives and fundamentals, are made. Allthree algorithms are applied to face recognition. Results indicate that the proposed algorithm canreduce training time with comparable recognition rate and it is least sensitive to the training set.So its average performance exceeds the other two.

Recognition mechanism and sequence optimization of organophosphorus pesticides aptamers for better monitoring contaminations in food

Aptamers as a kind of biological recognition element have shown great potential in monitoring and the rapid quantification of organophosphorus pesticides(OPPs). However, molecules of OPPs are structurally similar and original aptamers selected by systematic evolution of ligands by exponential enrichment are usually long-chain bases, which hamper the further application under OPPs-aptamer recognition. The aim of the research was to develop a new strategy to design oligonucleotide sequences for binding OPPs by combination of experimental and molecular modeling methods. 3D models of aptamers binding OPPs were constructed, and binding energy and the most probable binding site for the OPPs were then determined by molecular docking, and the binding sites were further confirmed by the results of 2-AP replaced experiments. Based on the docking results, a new aptamer for detection 4 representative OPPs with only 29 bases was designed by reasonable truncation and mutation of the reported aptamer(named S4-29). The interaction between this new aptamer and OPPs were analyzed by molecular docking, microscale thermophoresis, circular dichroism and fluorometric analysis. The results revealed that the new aptamer exhibit more superior recognition performance to OPPs, which can be promote the monitoring ability of OPPs contaminations in food.

Simulated annealing algorithm for the optimal translation sequence of the jth agent in rough communication

In rough communication, because each agent has a different language and cannot provide precise communication to each other, the concept translated among multi-agents will loss some information and this results in a less or rougher concept. With different translation sequences, the problem of information loss is varied. To get the translation sequence, in which the jth agent taking part in rough communication gets maximum information, a simulated annealing algorithm is used. Analysis and simulation of this algorithm demonstrate its effectiveness.

The Linear Span of a Class of Optimal Frequency Hopping Sequences

For the anti-jamming purpose,frequency hopping sequences are required to have a large linear span. In this paper,we firstly give the linear span of a class of optimal frequency hopping sequences. The results show that the linear span is very small compared with their periods. To improve the linear span,we transform these optimal frequency hopping sequences into new optimal frequency hopping sequences with large linear span by using a general type of permutation polynomials over a finite field. Furthermore,we give the exact values of the linear span of the transformed optimal frequency hopping sequences.

An Optimal Sorting of Pulse Amplitude Sequence Based on the Phased Array Radar Beam Tasks

The study of phased array radar( PAR) pulse amplitude sequence characteristics is the key to understand the radar's working state and its beam's scanning manner.According to the principle of antenna pattern formation and the searching and tracking modes of beams,this paper analyzes the characteristics and differences of pulse amplitude sequence when the radar beams work in searching and tracking modes respectively.Then an optimal sorting model of pulse amplitude sequence is established based on least-squares and curve-fitting methods.This method is helpful for acquiring the current working state of the radar and recognizing its instantaneous beam pointing by sorting the pulse amplitude sequence without the necessity to estimate the antenna pattern.

ON CHANNEL ESTIMATION USING OPTIMAL TRAINING SEQUENCES IN CYCLIC-PREFIX-BASED SINGLE-CARRIER SYSTEMS WITH SPACE-TIME BLOCK-CODING

In this paper, a new scheme that combines Space-Time Block-Coding (STBC) based on an Alamouti-like scheme and the Least Squares (LS) channel estimation using optimal training sequences in Cyclic-Prefix-based (CP)\Single-Carrier (SC) systems is proposed. With two transmit antennas, based on Cramer-Rao lower bound for channel estimation, it is shown that the Periodic Comple- mentary Set (PCS) is optimal over frequency-selective fading channels. Compared with the normal scheme without STBC, 3dB Mean Square Error (MSE) performance gains and fewer restrictions on the length of channel impulse response are demonstrated.

Genetic algorithm for λ-optimal translation sequence of rough communication

In rough communication, because each agent has a different language and can not provide precise communication to each other, the concept translated among multi-agents will loss some information, and this results in a less or rougher concept. With different translation sequences the amount of the missed knowledge is varied. The λ-optimal translation sequence of rough communication, which concerns both every agent and the last agent taking part in rough communication to get information as much as he （or she） can, is given. In order to get the λ-optimal translation sequence, a genetic algorithm is used. Analysis and simulation of the algorithm demonstrate the effectiveness of the approach.

Optimization method for diagnostic sequence based on improved particle swarm optimization algorithm

To realize the requirement of diagnostic sequence optimization in the process of design for testability, the authors put forward an optimization method based on quantum-behaved particle swarm optimization （QPSO） algorithm. By a precedence ordering coding, the diagnostic sequence optimization can be translated into a precedence ordering problem in the multidimensional space of swarm. It can get the optimizing order quickly by using the powerful and quick search capability of QPSO algorithm, and the order is the diagnostic sequence for the system. The realization of the method is simpler than other methods, and the results are more excellent than others, and it has been applied in the engineering practice.

Sequence optimization of hull structure assembly based on prediction of welding deformation

Optimization of assembly process is significant for ship construction, thus reducing the time and related costs of construction. Welding Structure Deformation Analysis （Weld-sta） was used to predict welding deformation of a hull block. After the reliability of simulation was proved by comparing with measured results, four kinds of welding sequences was determined. By considering welding deformation and assembly process with the e]ficieney of automation, decreasing the overturn times （times of turning the erections upside down during welding） and working hours etc, one of the welding sequences is assumed to be the most reasonable one. The study shows this method is very useful in optimal assembly program determination of practical engineering structures.

Low-complexity PTS scheme based on phase factor sequences optimization

In this paper, a new partial transmit sequence（PTS）scheme with low computational complexity is proposed for the problems of high computational complexity in the conventional PTS method. By analyzing the relationship of candidate sequences in the PTS method under the interleaved partition method, it has been discovered that some candidate sequences generated by phase factor sequences have the same peak average power ratio（PAPR）. Hence, phase factor sequences can be optimized to reduce their searching times. Then, the computational process of generating candidate sequences can be simplified by improving the utilization of data and minimizing the calculations of complex multiplication. The performance analysis shows that, compared with the conventional PTS scheme, the proposed approach significantly decreases the computational complexity and has no loss of PAPR performance.

Distillation Sequence Optimization Considering Extractive Distillation under Multiple Conditions: A Methanol to Propylene Case Study

This study provides insights into the distillation sequence optimization of refinery system in a methanol to propylene plant with extractive distillation under multiple conditions. The simulated annealing algorithm(SA) with relative cost function was used to solve a meaningful optimization problem. It was observed that different conditions had differed on the flowsheet. Case study shows the effectiveness of the proposed method.

Stability analysis of backflling in subsiding area and optimization of the stoping sequence

In underground mining by sublevel caving method, the deformation and damage of the surface induced by subsidence are the major challenging issues. The dynamic and soft backflling body increases the safety risks in the subsiding area. In this paper, taking Zhangfushan iron mine as an example, the ore body and the general layout are focused on the safety of backflling of mined-out area. Then, we use the ANSYS software to construct a three-dimensional(3D) model for the mining area in the Zhangfushan iron mine. According to the simulation results of the initial mining stages, the ore body is stoped step by step as suggested in the design. The stability of the backflling is back analyzed based on the monitored displacements, considering the stress distribution to optimize the stoping sequence. The simulations show that a reasonable stoping sequence can minimize the concentration of high compressive stress and ensure the safety of stoping of the ore body.

STACKING SEQUENCE OPTIMIZA-TION OF LAMINATED COMPOSITE CYLINDER SHELL FOR MAXIMAL BUCKLING LOAD

A new optimization method for the optimization of stacking of composite glass fiber laminates is developed. The fiber orientation and angle of the layers of the cylindrical shells are sought considering the buckling load. The proposed optimization algorithm applies both finite element analysis and the mode-pursuing sampling （MPS）method. The algorithms suggest the optimal stacking sequence for achieving the maximal buckling load. The procedure is implemented by integrating ANSYS and MATLAB. The stacking sequence designing for the symmetric angle-ply three-layered and five-layered composite cylinder shells is presented to illustrate the optimization process, respectively. Compared with the genetic algorithms, the proposed optimization method is much faster and efficient for composite staking sequence plan.

Cuckoo search algorithm-based optimal deployment method of heterogeneous multistatic radar for barrier coverage

This paper proposes an optimal deployment method of heterogeneous multistatic radars to construct arc barrier coverage with location restrictions.This method analyzes and proves the properties of different deployment patterns in the optimal deployment sequence.Based on these properties and considering location restrictions,it introduces an optimization model of arc barrier coverage and aims to minimize the total deployment cost of heterogeneous multistatic radars.To overcome the non-convexity of the model and the non-analytical nature of the objective function,an algorithm combining integer line programming and the cuckoo search algorithm(CSA)is proposed.The proposed algorithm can determine the number of receivers and transmitters in each optimal deployment squence to minimize the total placement cost.Simulations are conducted in different conditions to verify the effectiveness of the proposed method.

Evolutionary Computation for Realizing Distillation Separation Sequence Optimization Synthesis

Evolutionary algorithm is applied for distillation separation sequence optimization synthesis problems with combination explosion. The binary tree data structure is used to describe the distillation separation sequence, and it is directly applied as the coding method. Genetic operators, which ensure to prohibit illegal filial generations completely, are designed by using the method of graph theory. The crossover operator based on a single parent or two parents is designed successfully. The example shows that the average ratio of search space from evolutionary algorithm with two-parent genetic operation is lower, whereas the rate of successful minimizations from evolutionary algorithm with single parent genetic operation is higher.

Particle Swarm Optimization Algorithm Based on Chaotic Sequences and Dynamic Self-Adaptive Strategy

To deal with the problems of premature convergence and tending to jump into the local optimum in the traditional particle swarm optimization, a novel improved particle swarm optimization algorithm was proposed. The self-adaptive inertia weight factor was used to accelerate the converging speed, and chaotic sequences were used to tune the acceleration coefficients for the balance between exploration and exploitation. The performance of the proposed algorithm was tested on four classical multi-objective optimization functions by comparing with the non-dominated sorting genetic algorithm and multi-objective particle swarm optimization algorithm. The results verified the effectiveness of the algorithm, which improved the premature convergence problem with faster convergence rate and strong ability to jump out of local optimum.

Welding sequences optimization of box structure based on genetic algorithm method

In this article, The genetic algorithm method was proposed, that is, to establish the box structure＇s nonlinear three-dimension optimization numerical model based on thermo-mechanical coupling algorithm, and the objective function of welding distortion has been utilized to determine an optimum welding sequence by optimization simulation. The validity of genetic algorithm method combining with the thermo-mechanical nonlinear finite element model is verified by comparison with the experimental data where available. By choosing the appropriate objective function for the considered case, an optimum weldiing.sequence is determined by a genetic algorithm. All done in this study indicates that the new method presented in this article will have important practical application for designing the welding technical parameters in the future.

Strategy of Concurrent Optimization for an Assembly Sequence

An effective constraint release based approach to realize concurrent optimization for an assembly sequence is proposed. To quantify the measurement of assembly efficiency, a mathematical model of concurrency evaluation index was put forward at first, and then a technology to quantify assembly constraints was developed by application of some fuzzy logic algorithms. In the process of concurrent optimization of the assembly sequence, two kinds of constraints were involved. One was self-constraints of components, which was used to evaluate the assemble capability of components under the condition of full-freedom. Another was an assembly constraint between components represented by geometric constraints between points, lines and planes under physical restriction conditions. The concept of connection strength degree （CSD） was introduced as one efficient indicator and the value of it was evaluated by the intersection of the two constraints mentioned above. The equivalent constraints describing the connection weights between components were realized by a well designed constraints reduction, and then the connection weights based complete assembly liaison graph was applied to release virtual connections between components. Under a given threshold value, a decomposition and reconstituting strategy for the graph with the focus on high assembly concurrency was used to realize an optimized assembly concurrency evaluation index. Finally, the availability of the approach was illustrated in an example to optimize the assembly of a shift pump.

Optimal Maintenance Policy for a Storage System with Finite Number of Inspections

The expected cost per unit of time for a sequential inspection policy is derived. It still has some difficulties to compute an optimal sequential policy numerically, which minimizes the expected cost of a system with finite number of inspections. This paper gives the algorithm for an optimal inspection schedule and specifies the computing procedure for a Weibull distribution. Using this algorithm, optimal inspection times are computed as a numerical result. Compared with the periodic point inspection, the policies in this paper reduce the cost successfully.

Effect of welding sequence on residual stress and deformation of 6061-T6 aluminium alloy automobile component

Four different welding sequences of double-pulse MIG welding were conducted for 6061-T6 aluminum alloy automobile bumpers by using nonlinear elastoplasticity finite element method based on ABAQUS software.The post-welding residual stress and deformation were definitely different among the four welding sequences.The results showed that the highest temperature in Solution A was approximately 200℃higher than the melting point of base metal.High residual stress was resulted from this large temperature gradient and mainly concentrated on the welding vicinity between beam and crash box.The welding deformation primarily occurred in both of the contraction of two-ends of the beam and the self-contraction of crash box.Compared with other welding sequences,the residual stress in Solution A was the smallest,whereas the welding deformation was the largest.However,the optimal sequence was Solution B because of the effective reduction of residual stress and good assembly requirements.