Monitoring Surface Deformation Using Distributed Scatterers InSAR

In the past two decades,extensive and in-depth research has been conducted on Time Series InSAR technology with the advancement of high-performance SAR satellites and the accumulation of big SAR data.The introduction of distributed scatterers in Distributed Scatterers InSAR(DS-InSAR)has significantly expanded the application scenarios of InSAR geodetic measurement by increasing the number of measurement points.This study traces the history of DS-InSAR,presents the definition and characteristics of distributed scatterers,and focuses on exploring the relationships and distinctions among proposed algorithms in two crucial steps:statistically homogeneous pixel selection and phase optimization.Additionally,the latest research progress in this field is tracked and the possible development direction in the future is discussed.Through simulation experiments and two real InSAR case studies,the proposed algorithms are compared and verified,and the advantages of DS-InSAR in deformation measurement practice are demonstrated.This work not only offers insights into current trends and focal points for theoretical research on DS-InSAR but also provides practical cases and guidance for applied research.

High Energy Efficiency Dynamic Connected Hybrid Precoding for mm Wave Massive MIMO Systems

This paper considers a high energy efficiency dynamic connected(HEDC)structure,which promotes the practicability and reduces the power consumption of hybrid precoding system by lowresolution phase shifters(PSs).Based on the proposed structure,a new hybrid precoding algorithm is presented to optimize the energy efficiency,namely,HP-HEDC algorithm.Firstly,via a new defined effective optimal precoding matrix,the problem of optimizing the analog switch precoding matrix is formulated as a sparse representation problem.Thus,the optimal analog switch precoding matrix can be readily obtained by the branch-and-bound method.Then,the digital precoding matrix optimization problem is modeled as a dictionary update problem and solved by the method of optimal direction(MOD).Finally,the diagonal entries of the analog PS precoding matrix are optimized by exhaustive search independently since PS and antenna is one-to-one.Simulation results show that the HEDC structure enjoys low power consumption and satisfactory spectral efficiency.The proposed algorithm presents at least 50%energy efficiency improvement compared with other algorithms when the PS resolution is set as 3-bit.

Vanadium oxide nanospheres encapsulated in N-doped carbon nanofibers with morphology and defect dual-engineering toward advanced aqueous zinc-ion batteries

Vanadium-based electrodes are regarded as attractive cathode materials in aqueous zinc ion batteries(ZIBs)caused by their high capacity and unique layered structure.However,it is extremely challenging to acquire high electrochemical performance owing to the limited electronic conductivity,sluggish ion kinetics,and severe volume expansion during the insertion/extraction process of Zn^(2+).Herein,a series of V_(2)O_(3)nanospheres embedded N-doped carbon nanofiber structures with various V_(2)O_(3)spherical morphologies(solid,core-shell,hollow)have been designed for the first time by an electrospinning technique followed thermal treatments.The N-doped carbon nanofibers not only improve the electrical conductivity and the structural stability,but also provides encapsulating shells to prevent the vanadium dissolution and aggregation of V_(2)O_(3)particles.Furthermore,the varied morphological structures of V_(2)O_(3)with abundant oxygen vacancies can alleviate the volume change and increase the Zn^(2+)pathway.Besides,the phase transition between V_(2)O_(3)and Zn_XV_(2)O_(5-m)·n H_(2)O in the cycling was also certified.As a result,the as-obtained composite delivers excellent long-term cycle stability and enhanced rate performance for coin cells,which is also confirmed through density functional theory(DFT)calculations.Even assembled into flexible ZIBs,the sample still exhibits superior electrochemical performance,which may afford new design concept for flexible cathode materials of ZIBs.

Transmit Power Minimization for IRS-Assisted NOMA-UAV Networks

The flexibility of unmanned aerial vehicles(UAVs)allows them to be quickly deployed to support ground users.Intelligent reflecting surface(IRS)can reflect the incident signal and form passive beamforming to enhance the signal in the specific direction.Motivated by the promising benefits of both technologies,we consider a new scenario in this paper where a UAV uses non-orthogonal multiple access to serve multiple users with IRS.According to their distance to the UAV,the users are divided into the close users and remote users.The UAV hovers above the close users due to their higher rate requirement,while the IRS is deployed near the remote users to enhance their received power.We aim at minimizing the transmit power of UAV by jointly optimizing the beamforming of UAV and the phase shift of IRS while ensuring the decoding requirement.However,the problem is non-convex.Therefore,we decompose it into two sub-problems,including the transmit beamforming optimization and phase shift optimization,which are transformed into second-order cone programming and semidefinite programming,respectively.We propose an iterative algorithm to solve the two sub-problems alternatively.Simulation results prove the effectiveness of the proposed scheme in minimizing the transmit power of UAV.

Optimization of the Phase Diagram of CeO_2-ZrO_2 System

Revised phase diagram of the CeO2-ZrO2 system is optimized and the lattice stability parameters of CeO2 of various phases as well as solution parameters of phases (liquid, cubic, tetragonal and monoclinic) are simultaneously obtained by using the Kaufman and Nesor's model for describing the ceramic solutions and the Lukas program

Low-complexity PTS scheme based on phase factor sequences optimization

In this paper, a new partial transmit sequence（PTS）scheme with low computational complexity is proposed for the problems of high computational complexity in the conventional PTS method. By analyzing the relationship of candidate sequences in the PTS method under the interleaved partition method, it has been discovered that some candidate sequences generated by phase factor sequences have the same peak average power ratio（PAPR）. Hence, phase factor sequences can be optimized to reduce their searching times. Then, the computational process of generating candidate sequences can be simplified by improving the utilization of data and minimizing the calculations of complex multiplication. The performance analysis shows that, compared with the conventional PTS scheme, the proposed approach significantly decreases the computational complexity and has no loss of PAPR performance.

ASSESSMENT AND OPTIMIZATION OF THE PHASE DIAGRAMS AND THERMODYNAMIC DATA OF SOME BINARY SYSTEMS CONTAINING PRASEODYMIUM CHLORIDES

In this paper a critical assessment and optimization of the phase diagrams and thermodynamic properties of the PrCl_3-MCl(M=Li,Na)and PrCl_3-MCl_2(M=Mg,Ca,Sr,Ba) binary systems have been per- formed.The assessed and optimized binary phase diagrams and thermodynamic data with self consistency are a better basis for constructing multicomponent phase diagrams.

Nd∶ReCOB晶体的生长、各向异性和最佳相位匹配方向

Red,blue and green visible lasers are more attractive with the development of the science and technology.Self frequency doubling is an important approach to realize visible lasers.For self frequency doubling,the basic requests are high figure of merit(FOM),high damage threshold,good chemical stability and mechanical properties.Perfection and growth characters are also important for a practical SFD crystal. In recent years,the discovery of rare earth calcium oxyborates has resulted in the renewal in the field of SFD crystal.ReCaO(BO 3) 3(ReCOB)is a new type of novel nonlinear optical crystals which is nearly congruently melt and can be grown with Czochralski method.ReCOB crystals possess high nonlinear coefficients and damage thresholds.They are non hydroscopic and easy cutting and polishing.They belong to monoclinic with point group m and space group cm.The strong anisotropy originated from the low symmetry makes the measurement and application of the crystal more complicated.More than half of naturally existed crystals belongs to low symmetry,consequently,the research on the nonlinear and anisotropic laser optical properties are not only important for ReCOB crystal,but also useful for the applications of other low symmetry crystals.

A modified active disturbance rejection control for a wastewater treatment process

Waste water treatment process(WWTP)control has been attracting more and more attention.However,various undesired factors,such as disturbance,uncertainties,and strong nonlinear couplings,propose big challenges to the control of a WWTP.In order to improve the control performance of the closed-loop system and guarantee the discharge requirements of the effluent quality,rather than take the model dependent control approaches,an active disturbance rejection control(ADRC)is utilized.Based on the control signal and system output,a phase optimized ADRC(POADRC)is designed to control the dissolved oxygen and nitrate concentration in a WWTP.The phase advantage of the phase optimized extended state observer(POESO),convergence of the POESO,and stability of the closed-loop system are analyzed from the theoretical point of view.Finally,a commonly accepted benchmark simulation model no.1.(BSM1)is utilized to test the POESO and POADRC.Linear active disturbance rejection control(LADRC)and the suggested proportion-integration(PI)control are taken to make a comparative research.Both system responses and performance index values confirm the advantage of the POADRC over the LADRC and the suggested PI control.Numerical results show that,as a result of the leading phase of the total disturbance estimation,the POESO based POADRC is an effective and promising way to control the dissolved oxygen and nitrate concentration so as to ensure the effluent quality of a WWTP.

Thermodynamic analysis of the Ti-Al-N system

Motivated by the application of （Ti, Al）N alloy compound in the coating layer, the ternary phase diagram of Ti-Al-N was analyzed by the calculation of the phase diagram （CALPHAD） technique. The isothermal sections of the Ti-Al-N ternary system were constructed and compared with the literature experimental results. The thermodynamic parameters of the Ti-Al-N ternary system and the related Ti-N and Al-N binary systems were adopted from literatures, whereas, those of the Ti-Al binary from the literatures were adjusted according to both the ternary and the binary phase equilibria. The consistency between the calculated results and the experimental data shows that considering the ternary thermodynamic relationship, the adjustments to the thermodynamic parameters of the related binaries are necessary.

Cylinder pressure based combustion phase optimization and control in spark-ignited engines

Efficiency and emissions of spark-ignited engines are significantly affected by combustion phase which can usually be indicated by crank angle of 50% mass burnt （CA50）. Managing combustion phase at the optimal value at which the maximal efficiency can be achieved is a challenging issue due to the cyclic variations of combustion process. This paper addresses this issue in two loops： CA50 set-point optimization （outer loop） and set-point tracking （inner loop） by controlling spark advance （SA）. Extremum seeking approach maximizing thermal efficiency is employed in the CA50 set-point optimization. A proportional- integral （PI） controller is adopted to make the moving average value of CA50 tracking the optimal CA50 set-point determined in the outer loop. Moreover, in order to obtain fast responses at steady and transient operations, feed-forward maps are designed for extremum seeking controller and PI controller, respectively. Finally, experimental validations are conducted on a six-cylinder gasoline at steady and transient operations to show the effectiveness of proposed control scheme.

Model-based optimization of phased array ultrasonic testing

Simulation of phased array beams in dovetail and austenitic welds is conducted to optimize the setup of phased array ultrasonic testing（PAUT）.To simulate the beam in such material with complex geometry or with characteristic of anisotropy and inhomogeneity, firstly,linear phased multi-Gaussian beam（LPMGB） models are introduced and discussed. Then,in the case of dovetail,wedge is designed to maximize the stable amplitude of the beam along the steering path;in the case of austenitic weld,modified focal law are developed to solve the problem of beam screwing and defocusing due to the material properties.To verify the effectiveness of the modified focal law,beam fields are calculated using LPMGB model in austenitic welds.

Computer-assisted optimization of mobile phase compositions and development distance selectivity in gradient two-step development high-performance thin-layer chromatography

A computer-assisted method is presented for optimization of mobile phase compositions and development distance in gradient two-step development HPTLC. The method is based on a system which can predict the final R(f) values for gradient two-step development from values measured using five preliminary runs. The statistical scanning method is then used for optimization, using R(f) difference as the selection criterion. The method was evaluated using a mixture of eight components. Excellent agreement was obtained between predicted and experimental results.

Computer-assisted optimization for the selection of mobile phase in semi-preparative HPLC

A computer-assisted method is presented for optimization for the selection of mobile phase composition in semi-preparative HPLC.The optimization for the expected separation is based on a polynomial estimation from five preliminary runs.Statistical scanning technique was used for optimization.Double criteria simulation system (DCSS) is established for chromatographic perfor- mance measurement in this method.The validity of the optimization strategy is confirmed by applying it to a technical Cypermethrin separation.Excellent agreement is obtained between the predicted and experimental results.

The principle of optimization of binary mobile phase composition of multi-step linear gradient elution

The basic principle of optimal method called “moving overlapping resolution mapping Method” to select the optimal binary mobile phase composition of multi-step linear gradient liquid chromatography is discussed with simultaneously considering effects of position of solute inside the column and mobile phase composition on peak resolution and retention value, then a BASIC program based on this principle is developed in IBM-PC computer. The validities of both principle of optimization and BASIC program are confirmed by separation of samples Containing bile acids and PAHs in RP-HPLC.

Design optimization of the APF DTL in the SSC-linac

A linear accelerator as a new injector for the SSC （Separated Sector Cyclotron） of the HIRFL （Heavy Ion Research Facility Lanzhou） is being designed. The DTL （Drift-Tube-Linac） has been designed to accelerate ^238U^34＋ from 0.140 MeV/u to 0.97 MeV/u. To the first accelerating tank which accelerates ^238U^34＋ to 0.54 MeV/u, the approach of Alternating-Phase-Focusing （APF） is applied. The phase array is obtained by coupling optimization software Dakota and beam optics code LINREV. With the hybrid of Multi- objective Genetic Algorithm （MOGA） and a pattern search method, an optimum array of asynchronous phases is determined. The final growth, both transversely and longitudinally, can meet the design requirements. In this paper, the deign optimization of the APF DTL is presented.