Theoretical and Experimental Research on Error Analysis and Optimization of Tool Path in Fabricating Aspheric Compound Eyes by Precision Micro Milling

Structure design and fabricating methods of three-dimensional （3D） artificial spherical compound eyes have been researched by many scholars. Micro-nano optical manufacturing is mostly used to process 3D artificial compound eyes. However, spherical optical compound eyes are less at optical performance than the eyes of insects, and it is difficult to further improve the imaging quality of compound eyes by means of micro-nano optical manufacturing. In this research, nonhomogeneous aspheric compound eyes （ACEs） are designed and fabricated. The nonhomogeneous aspheric structure is applied to calibrate the spherical aberration. Micro milling with advantages in processing three-dimensional micro structures is adopted to manufacture ACEs. In order to obtain ACEs with high imaging quality, the tool paths are optimized by analyzing the influence factors consisting of interpolation allowable error, scallop height and tool path pattern. In the experiments, two kinds of ACEs are manufactured by micro-milling with different too path patterns and cutting parameter on the miniature precision five-axis milling machine tool. The experimental results indicate that the ACEs of high surface quality can be achieved by circularly milling small micro-lens individually with changeable cutting depth. A prototype of the aspheric compound eye （ACE） with surface roughness （Ra） below 0.12 p.m is obtained with good imaging performance. This research ameliorates the imaging quality of 3D artificial compound eyes, and the proposed method of micro-milling can improve surface processing quality of compound eyes.

Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo

Diamond turning based on a fast tool servo(FTS)is widely used in freeform optics fabrication due to its high accuracy and machining efficiency.As a new trend,recently developed high-frequency and long-stroke FTS units are independently driven by a separate control system from the machine tool controller.However,the tool path generation strategy for the independently controlled FTS is far from complete.This study aims to establish methods for optimizing tool path for the independent control FTS to reduce form errors in a single step of machining.Different from the conventional integrated FTS control system,where control points are distributed in a spiral pattern,in this study,the tool path for the independent FTS controller is generated by the ring method and the mesh method,respectively.The machined surface profile is predicted by simulation and the parameters for the control point generation are optimized by minimizing the deviation between the predicted and the designed surfaces.To demonstrate the feasibility of the proposed tool path generation strategies,cutting tests of a two-dimensional sinewave and a micro-lens array were conducted and the results were compared.As a result,after tool path optimization,the peak-to-valley form error of the machined surface was reduced from 429 nm to 56 nm for the two-dimensional sinewave by using the ring method,and from 191 nm to 103 nm for the micro-lens array by using the mesh method,respectively.

ENVELOPING THEORY BASED METHOD FOR THE DETERMINATION OF PATH INTERVAL AND TOOL PATH OPTIMIZATION FOR SURFACE MACHINING

An enveloping theory based method for the determination of path interval in three axis NC machining of free form surface is presented, and a practical algorithm and the measures for improving the calculating efficiency of the algorithm are given. Not only the given algorithm can be used for ball end cutter, flat end cutter, torus cutter and drum cutter, but also the proposed method can be extended to arbitrary milling cutters. Thus, the problem how to strictly calculate path interval in the occasion of three axis NC machining of free form surfaces with non ball end cutters has been resolved effectively. On this basis, the factors that affect path interval are analyzed, and the methods for optimizing tool path are explored.