Mechanism and control of water seepage of vertical feeding borehole for solid materials in backflling coal mining

To solve the problem of water seepage of vertical feeding borehole for solid materials,we established the fluid-solid coupling dynamic model of groundwater flowing in rock mass adjacent to the vertical feeding borehole.Combining with the engineering geological conditions,we built a numeral model to study the influence rule of the aquifer hydraulic pressure and seepage location of feeding borehole on the amount of seepage with fnite element numerical method.The results show that the nonlinear relationship is presented among the amount of seepage,the seepage location and aquifer hydraulic pressure.The higher the aquifer hydraulic pressure is,the closer the distance between seepage location and aquifer is,and the faster the harmful levels of aquifer will grow.In practice,we calculated the allowable seepage of feeding borehole by the optimum moisture content and natural moisture content of backflling materials,and then determined the protection zone of feeding borehole,so the moisture content of backflling materials can be controlled within the scope of optimum moisture content.

Geotechnical Identification and Classification of Soils as Flexible Pavement Subgrade of the Section Fongo Tongo-Melong

The present study is inscribed within the framework of the geotechnical characterization of the soils of the Santchou plain, their classification for employment as pavement subgrade, various identification tests were carried out on the samples. The results obtained showed that with a wide range of different grain sizes, the studied soils showed low content in clay grains and dominance of either sand grains or silt grains, this can be explaining how most of these soil are poorly graded. According to the USDA textural classification, the grain size distribution of these soils makes them to be classified as Silty Loam types to Sandy Loam types. Despite of their organic matter content which is less than 10%, according to their respective methylene blue values, the soils studied along the section should be mainly loamy soil of medium plasticity to clayed soil, therefore showing a sensibility of its behavior to variation of water content. That last one is confirmed by the consistency parameters of these soils which show intermediate plasticity to highly plastic. Also, the bearing capacity proposed by these soils at their respective optimum dry densities is relatively small, although most of these experimental CBR values of the studied soils are more important than the ones prescribed by the AASHTO Classification system for A5, A6, and A7 types, and the French Highway Earthworks Manual Classifications system (GTR) for the corresponding A2 and A3 types.

Effects of Soil-Cement Stabilization on the Index Properties of Subgrades of Three Selected Roads in the Niger Delta Region of Nigeria

In this study, the impact of soil-cement stabilization on the index properties of the subgrade of roads was investigated. Efforts were on the means of improving the bearing capacity of the subgrade of a flexible pavement structure. Three selected roads (Ogbia-Nembe, section of the East-West Road and section of Port Harcourt-Aba Road) in the Niger Delta Region of Nigeria were examined to determine the effect of sand-cement stabilization on the compaction index property of their undisturbed subgrade and the optimal ratio of soil-cement on the expansive soils at which the California Bearing Ratio (CBR) is optimized. Disturbed soil samples were collected from twenty trial pits on each of the three study roads using a hand ulger and tested for their respective compaction index properties. It was discovered that their California Bearing Ratio (CBR) was very low. Some of the collected specimen materials were stabilized with varying percentages of soil-cement contents ranging from 6% - 14% in order to ascertain its effects on the compaction index properties of the sample soils. Results of the various stabilization test procedures show that: Stabilization of the soil using Soil-Cement Stabilization affected the Compaction Index properties of the soil and further improved the California Bearing Ratio (CBR). On the Ogbia-Nembe Road;Soil-Cement stabilization improved the CBR and is optimized at a 10% sand-cement ratio with optimum moisture content ranging from 6.2% - 14%, maximum dry density ranges from 1700 - 1780 kg/m3, yielding an average CBR of 42.7% for soaked samples. On the section of East-West Road from Eleme Junction to Etteh Junction;Soil-Cement stabilization improved the CBR and is optimized at a 14% sand-cement ratio with optimum moisture content ranging from 6.2% - 14.2%, maximum dry density ranges from 1660 - 1800 kg/m3, yielding an average CBR of 43.9% for soaked samples. On the section of Port Harcourt-Aba Express Road from Eleme Junction to Osisioma Junction;Soil-Cement stabilization improved the CBR and is optimized at a 12% sand-cement ratio having an optimum moisture content ranging from 5.4% - 17.3%, maximum dry density ranges from 1610 - 1740 kg/m3, and an average California Bearing Ratio for soaked samples at 40%.