Device design principles and bioelectronic applications for flexible organic electrochemical transistors

Organic electrochemical transistors(OECTs) exhibit significant potential for applications in healthcare and human-machine interfaces, due to their tunable synthesis, facile deposition, and excellent biocompatibility. Expanding OECTs to the fexible devices will significantly facilitate stable contact with the skin and enable more possible bioelectronic applications. In this work,we summarize the device physics of fexible OECTs, aiming to offer a foundational understanding and guidelines for material selection and device architecture. Particular attention is paid to the advanced manufacturing approaches, including photolithography and printing techniques, which establish a robust foundation for the commercialization and large-scale fabrication. And abundantly demonstrated examples ranging from biosensors, artificial synapses/neurons, to bioinspired nervous systems are summarized to highlight the considerable prospects of smart healthcare. In the end, the challenges and opportunities are proposed for fexible OECTs. The purpose of this review is not only to elaborate on the basic design principles of fexible OECTs, but also to act as a roadmap for further exploration of wearable OECTs in advanced bio-applications.

Direct Synthesis of Layer-Tunable and Transfer-Free Graphene on Device-Compatible Substrates Using Ion Implantation Toward Versatile Applications

Direct synthesis of layer-tunable and transfer-free graphene on technologically important substrates is highly valued for various electronics and device applications.State of the art in the field is currently a two-step process:a high-quality graphene layer synthesis on metal substrate through chemical vapor deposition(CVD)followed by delicate layer transfer onto device-relevant substrates.Here,we report a novel synthesis approach combining ion implantation for a precise graphene layer control and dual-metal smart Janus substrate for a diffusion-limiting graphene formation to directly synthesize large area,high quality,and layer-tunable graphene films on arbitrary substrates without the post-synthesis layer transfer process.Carbon(C)ion implantation was performed on Cu-Ni film deposited on a variety of device-relevant substrates.A well-controlled number of layers of graphene,primarily monolayer and bilayer,is precisely controlled by the equivalent fluence of the implanted C-atoms(1 monolayer~4×10^(15)C-atoms/cm^(2)).Upon thermal annealing to promote Cu-Ni alloying,the pre-implanted C-atoms in the Ni layer are pushed toward the Ni/substrate interface by the top Cu layer due to the poor C-solubility in Cu.As a result,the expelled C-atoms precipitate into a graphene structure at the interface facilitated by the Cu-like alloy catalysis.After removing the alloyed Cu-like surface layer,the layer-tunable graphene on the desired substrate is directly realized.The layer-selectivity,high quality,and uniformity of the graphene films are not only confirmed with detailed characterizations using a suite of surface analysis techniques but more importantly are successfully demonstrated by the excellent properties and performance of several devices directly fabricated from these graphene films.Molecular dynamics(MD)simulations using the reactive force field(ReaxFF)were performed to elucidate the graphene formation mechanisms in this novel synthesis approach.With the wide use of ion implantation technology in the microelectronics industry,this novel graphene synthesis approach with precise layer-tunability and transfer-free processing has the promise to advance efficient graphene-device manufacturing and expedite their versatile applications in many fields.

Quality of Service and Security on Cisco Network Devices, Coupled with the Development of a Mobile Application Prototype Software for Server Room Temperature Monitoring

In an era where digital technology is paramount, higher education institutions like the University of Zambia (UNZA) are employing advanced computer networks to enhance their operational capacity and offer cutting-edge services to their academic fraternity. Spanning across the Great East Road campus, UNZA has established one of the most extensive computer networks in Zambia, serving a burgeoning community of over 20,000 active users through a Metropolitan Area Network (MAN). However, as the digital landscape continues to evolve, it is besieged with burgeoning challenges that threaten the very fabric of network integrity—cyber security threats and the imperatives of maintaining high Quality of Service (QoS). In an effort to mitigate these threats and ensure network efficiency, the development of a mobile application to monitor temperatures in the server room was imperative. According to L. Wei, X. Zeng, and T. Shen, the use of wireless sensory networks to monitor the temperature of train switchgear contact points represents a cost-effective solution. The system is based on wireless communication technology and is detailed in their paper, “A wireless solution for train switchgear contact temperature monitoring and alarming system based on wireless communication technology”, published in the International Journal of Communications, Network and System Sciences, vol. 8, no. 4, pp. 79-87, 2015 [1]. Therefore, in this study, a mobile application technology was explored for monitoring of temperatures in the server room in order to aid Cisco device performance. Additionally, this paper also explores the hardening of Cisco device security and QoS which are the cornerstones of this study.

Manufacturing of graphene based synaptic devices for optoelectronic applications

Neuromorphic computing systems can perform memory and computing tasks in parallel on artificial synaptic devices through simulating synaptic functions,which is promising for breaking the conventional von Neumann bottlenecks at hardware level.Artificial optoelectronic synapses enable the synergistic coupling between optical and electrical signals in synaptic modulation,which opens up an innovative path for effective neuromorphic systems.With the advantages of high mobility,optical transparency,ultrawideband tunability,and environmental stability,graphene has attracted tremendous interest for electronic and optoelectronic applications.Recent progress highlights the significance of implementing graphene into artificial synaptic devices.Herein,to better understand the potential of graphene-based synaptic devices,the fabrication technologies of graphene are first presented.Then,the roles of graphene in various synaptic devices are demonstrated.Furthermore,their typical optoelectronic applications in neuromorphic systems are reviewed.Finally,outlooks for development of synaptic devices based on graphene are proposed.This review will provide a comprehensive understanding of graphene fabrication technologies and graphene-based synaptic device for optoelectronic applications,also present an outlook for development of graphene-based synaptic device in future neuromorphic systems.

A review of liquid crystal spatial light modulators:devices and applications

Spatial light modulators,as dynamic flat-panel optical devices,have witnessed rapid development over the past two decades,concomitant with the advancements in micro-and opto-electronic integration technology.In particular,liquid-crystal spatial light modulator(LC-SLM)technologies have been regarded as versatile tools for generating arbitrary optical fields and tailoring all degrees of freedom beyond just phase and amplitude.These devices have gained significant interest in the nascent field of structured light in space and time,facilitated by their ease of use and real-time light manipulation,fueling both fundamental research and practical applications.Here we provide an overview of the key working principles of LC-SLMs and review the significant progress made to date in their deployment for various applications,covering topics as diverse as beam shaping and steering,holography,optical trapping and tweezers,measurement,wavefront coding,optical vortex,and quantum optics.Finally,we conclude with an outlook on the potential opportunities and technical challenges in this rapidly developing field.

Recent progress on two-dimensional ferroelectrics:Material systems and device applications

Ferroelectrics are a type of material with a polar structure and their polarization direction can be inverted reversibly by applying an electric field.They have attracted tremendous attention for their extensive applications in non-volatile memory,sensors and neuromorphic computing.However,conventional ferroelectric materials face insulating and interfacial issues in the commercialization process.In contrast,two-dimensional(2D)ferroelectric materials usually have excellent semiconductor performance,clean van der Waals interfaces and robust ferroelectric order in atom-thick layers,and hold greater promise for constructing multifunctional ferroelectric optoelectronic devices and nondestructive ultra-high-density memory.Recently,2D ferroelectrics have obtained impressive breakthroughs,showing overwhelming superiority.Herein,firstly,the progress of experimental research on 2D ferroelectric materials is reviewed.Then,the preparation of 2D ferroelectric devices and their applications are discussed.Finally,the future development trend of 2D ferroelectrics is looked at.

Time Parameter Based Low-Energy Data Encryption Method for Mobile Applications

Various mobile devices and applications are now used in daily life.These devices require high-speed data processing,low energy consumption,low communication latency,and secure data transmission,especially in 5G and 6G mobile networks.High-security cryptography guarantees that essential data can be transmitted securely;however,it increases energy consumption and reduces data processing speed.Therefore,this study proposes a low-energy data encryption(LEDE)algorithm based on the Advanced Encryption Standard(AES)for improving data transmission security and reducing the energy consumption of encryption in Internet-of-Things(IoT)devices.In the proposed LEDE algorithm,the system time parameter is employed to create a dynamic S-Box to replace the static S-Box of AES.Tests indicated that six-round LEDE encryption achieves the same security level as 10-round conventional AES encryption.This reduction in encryption time results in the LEDE algorithm having a 67.4%lower energy consumption and 43.9%shorter encryption time than conventional AES;thus,the proposed LEDE algorithm can improve the performance and the energy consumption of IoT edge devices.

Advances in Rare Earth Application to Semiconductor Materials and Devices

The development of rare earths (RE) applications to semiconductor materials and devices is reviewed. The recent advances in RE doped silicon light emitting diodes (LED) and display materials are described. The various technologies of incorporating RE into semiconductor materials and devices are presented. The RE high dielectric materials, RE silicides and the phase transition of RE materials are also discussed. Finally, the paper describes the prospects of the RE application to semiconductor industry.

Organic optoelectronics:materials,devices and applications

The interest in organic materials for optoelectronic devices has been growing rapidly in the last two decades. This growth has been propelled by the exciting advances in organic thin films for displays, low-cost electronic circuits, etc. An increasing number of products employing organic electronic devices have become commercialized, which has stimulated the age of organic optoelectronics. This paper reviews the recent progress in organic optoelectronic technology. First, organic light emitting electroluminescent materials are introduced. Next, the three kinds of most important organic optoelectronic devices are summarized, including light emitting diode, organic photovoltaic cell, and photodetectors. The various applications of these devices are also reviewed and discussed in detail. Finally, the market and future development of optoelectronic devices are also demonstrated.

Future Applications of GaN Electron Devices

0 Introduction Fifteen years have passed since the first AlGaN/GaN HFET was reported in 1993.The FETs have already commercialized as microwave power devices,but volume production has not yet realized.The main application field is mobile phone base stations.For such applications,GaAs power transistors and silicon LDMOS have already been used.Therefore,advantages compared with these existing devices will be required,such as high efficiency,low distortion,low noise,high reliability and,especially,low cost.However,the latter two items are normally difficult for devices using new materials.

Review of My Research Work on Ferroelectric Films and Si-Based Device Applications: Opportunity and Challenge

Ferroelectric materials have many interesting physical properties such as ferroelectricity, pyroelectricity, piezoelectricity, and opto-electricity, and applying ferroelectric materials in the forms of thin and thick films and integrating them on the silicon substrate as electronic and MEMS devices is a very attractive research area and challenging. In this paper, we report our research works on ferroelectric MEMS and ferroelectric films for electronic device applications. Pyroelectric thin film infrared sensors have been made, characterized, and a 32×32 array with its size of 1cm×1cm has been obtained on Si membrane. Ferroelectric thin films in amorphous phase have been applied to make silicon based hydrogen gas sensors with the metal/amorphous ferroelectric film/metal device structure, and its turn-on voltage of about 4.5V at ～1000 ppm in air is about 7 times of the best value reported in the literature. For the application of electron emission flat panel display, ferroelectric BST thin films with excess Ti concentrations have been coated on Si tips, the threshold voltage of those ferroelectric film coated tips has been reduced about one order from ～70 V/μm to 4～10 V/μm for different Ti concentrations, and however, the electron emission current density has been increased at least 3～4 order for those coated tips compared to that of the bare Si tips. To fulfill in the thickness gap between thin film of typical ～1 μm made by PVD/CVD and polished ceramic wafer of ～50 μm from the bulk, piezoelectric films with thickness in a range of 1～30 μm have been successfully deposited on Si substrate at a low temperature of 650oC by a novel hybridized deposition technique, and piezoelectric MEMS ultrasonic arrays have been very recently obtained with the sound pressure level up to ～120 dB. More detailed results will be presented and mechanisms will be discussed.

Modern Monitoring Intraocular Pressure Sensing Devices Based on Application Specific Integrated Circuits

Glaucoma is a neurodegenerative condition that is the leading cause of irreversible blindness worldwide. Elevated intraocular pressure (IOP) is the main risk factor for the development and progression of the disease. Methods to lower IOP remain the first line treatments for the condition. Current methods of IOP measurement do not permit temporary noninvasive monitoring 24-hour IOP on a periodic basis. Ongoing research will in time provide a means of developing a device that will enable continuous or temporary monitoring of IOP. At present a device suitable for clinical use is not yet available.This review contains a description of different devices currently in development for measuring IOP: soft contact lens, LC resonant circuits and on-chip sensing devices. All of them use application-specific integrated circuits (ASICS) to process the measured signals and send them to recording devices. Soft contact lens devices are based on an embedded strain gauge, LC circuits vary their resonance frequency depending on the intraocular pressure (IOP) and, finally, on-chip sensing devices include an integrated microelectromechanical sensor (MEMS). MEMS are capacitors whose capacity varies with IOP. These devices allow for an accurate IOP measurement (up to +/– 0.2 mm Hg) with high sampling rates (up to 1 sample/min) and storing 1 week of raw data. All of them operate in an autonomous way and even some of them are energetically independent.

Swift Assembly of Adaptive Thermocell Arrays for Device‑Level Healable and Energy‑Autonomous Motion Sensors

The evolution of wearable technology has prompted the need for adaptive,self-healable,and energy-autonomous energy devices.This study innovatively addresses this challenge by introducing an MXene-boosted hydrogel electrolyte,which expedites the assembly process of flexible thermocell(TEC)arrays and thus circumvents the complicated fabrication of typical wearable electronics.Our findings underscore the hydrogel electrolyte’s superior thermoelectrochemical performance under substantial deformations and repeated self-healing cycles.The resulting hydrogel-based TEC yields a maximum power output of 1032.1 nW under theΔT of 20 K when being stretched to 500%for 1000 cycles,corresponding to 80%of its initial state;meanwhile,it sustains 1179.1 nW under theΔT of 20 K even after 60 cuthealing cycles,approximately 92%of its initial state.The as-assembled TEC array exhibits device-level self-healing capability and high adaptability to human body.It is readily applied for touch-based encrypted communication where distinct voltage signals can be converted into alphabet letters;it is also employed as a self-powered sensor to in-situ monitor a variety of body motions for complex human actions.The swift assembly approach,combined with the versatile functionality of the TEC device,paves the way for future advancements in wearable electronics targeting at fitness monitoring and human–machine interfaces.

Materials properties and device applications of semiconducting bismuth oxyselenide

Layered two-dimensional(2D)materials have garnered marvelous attention in diverse fields,including sensors,capacitors,nanocomposites and transistors,owing to their distinctive structural morphologies and superior physicochemical properties.Recently,layered quasi-2D materials,especially layered bismuth oxyselenide(Bi2O2Se),are of particular interest,because of their different interlayer interactions from other layered 2D materials.On this basis,this material offers richer and more intriguing physics,including high electron mobility,sizeable bandgap,and remarkable thermal and chemical durability,rendering it an utterly prospective contender for use in advanced electronic and optoelectronic applications.Herein,this article reviews the recent advances related with Bi2O2Se.Initially,its structural characterization,band structure,and basic properties are briefly introduced.Further,the synthetic strategies for the preparation of Bi_(2)O_(2)Se are presented.Furthermore,the diverse applications of Bi2O2Se in the field of electronics and optoelectronics,photocatalytic,solar cells and sensing were summarized in detail.Ultimately,the challenges and future perspectives of Bi2O2Se are included.

Research on Patent Situation of Medical Devices in China

Objective To study the patent situation of medical device industry in China based on patent data.Methods The analysis function of the patent search software incoPat was used to analyze the patent situation from two perspectives:The overall situation and the technical level.Results and Conclusion At present,China’s medical device industry is developing rapidly under the leadership of enterprises as the main body of innovation,but only 16%of patents are authorized.In addition,the technology distribution of medical device industry is mainly related to diagnostic,surgical and identification medical devices and implantable devices,accounting for 59%of the main technology distribution,and their technical effects are mainly related to improving convenience,reducing complexity,and improving safety.The quality of patents related to medical device industry in China is low,the technology distribution is not rich enough,and the level of technical efficacy is low.

Towards operation-stabilizing perovskite solar cells:Fundamental materials,device designs,and commercial applications

Over the last decade,perovskite solar cells(PSCs)have drawn extensive atten-tion owing to their high power conversion efficiency(single junction:26.1%,perovskite/silicon tandem:33.9%)and low fabrication cost.However,the short lifespan of PSCs with initial efficiency still blocks their practical applications.This operational instability may originate from the intrinsic and extrinsic deg-radation of materials or devices.Although the lifetime of PSCs has been prolonged through component,crystal,defect,interface,encapsulation engineering,and so on,the systematic analysis of failure regularity for PSCs from the perspective of materials and devices against multiple operating stressors is indispensable.In this review,we start with elaboration of the predominant degradation pathways and mechanism for PSCs under working stressors.Then the strategies for improving long-term durability with respect to fundamental materials,interface designs,and device encapsulation have been summarized.Meanwhile,the key results have been discussed to understand the limitation of assessing PSCs stability,and the potential applications in indoor photovoltaics and wearable electronics are demonstrated.Finally,promising proposals,encompassing material processing,film formation,interface strengthening,structure designing,and device encapsulation,are provided to improve the operational stability of PSCs and promote their commercialization.

Recent developments in functional organic polymer coatings for biomedical applications in implanted devices

Organic polymer coatings have been commonly used in biomedical field,which play an important role in achieving biological antifouling,drug delivery,and bacteriostasis.With the continuous development of polymer science,organic polymer coatings can be designed with complex and advanced functions,which is conducive to the construction of biomedical materials with different performances.According to different physical and chemical properties of materials,biomedical organic polymer coating materials are classified into zwitterionic polymers,non-ionic polymers,and biomacromolecules.The strategies of combining coatings with substrates include physical adsorption,chemical grafting,and self-adhesion.Though the coating materials and construction methods are different,many biomedical polymer coatings have been developed to achieve excellent performances,i.e.,enhanced lubrication,anti-inflammation,antifouling,antibacterial,drug release,anti-encrustation,anti-thrombosis,etc.Consequently,a large number of biomedical polymer coatings have been used in artificial lungs,ureteral stent,vascular flow diverter,and artificial joints.In this review,we summarize different types,properties,construction methods,biological functions,and clinical applications of biomedical organic polymer coatings,and prospect future direction for development of organic polymer coatings in biomedical field.It is anticipated that this review can be useful for the design and synthesis of functional organic polymer coatings with various biomedical purposes.

Advances in Medical Applications of Additive Manufacturing

In the past few decades,additive manufacturing(AM)has been developed and applied as a cost-effective and versatile technique for the fabrication of geometrically complex objects in the medical industry.In this review,we discuss current advances of AM in medical applications for the generation of pharmaceuticals,medical implants,and medical devices.Oral and transdermal drugs can be fabricated by a variety of AM technologies.Different types of hard and soft clinical implants have also been realized by AM,with the goal of producing tissue-engineered constructs.In addition,medical devices used for diagnostics and treatment of various pathological conditions have been developed.The growing body of research on AM reveals its great potential in medical applications.The goal of this review is to highlight the usefulness and elucidate the current limitations of AM applications in the medical field.