Low grade siliceous manganese ores from the iron ore group of the Bonai-Keonjhar belt, Orissa, India are found mostly in shear zones. The ore characteristics of siliceous manganese ore samples from three differ- ent m...Low grade siliceous manganese ores from the iron ore group of the Bonai-Keonjhar belt, Orissa, India are found mostly in shear zones. The ore characteristics of siliceous manganese ore samples from three differ- ent mines, viz. the Shankar (Barbil OMC lease hold area), the Sone-Patuli (Patmunda, OMM lease hold area), and the Musaghar (Roida, OMDC lease hold area), were studied. These siliceous manganese ores are of three types, respectively: (i) spongy-granular; (ii) massive-mosaic; and (iii) hard-mylonitized. The spongy-gran- ular type contains granular, saccharoidal quartz and the major manganese mineral present is pyrolusite. The second type contains well crystallized quartz and cryptomelane, while the third has cherty, fine grained quartz (mylonite) along with romanechite. All three ores were subjected to physical beneficiation under similar conditions. Both gravity and magnetic separation techniques were employed. The mineral-fabric of the ores has been correlated to the extent of their beneficiation using these physical techniques. Of these three ores only the spongy-granular type responded well to upgrading. The feed with 22% Mn content could be upgraded to 44% with a 28% yield and a 49% recovery. The good response to beneficiation of the spongy- granular sample could be due to the large euhedral crystals of pyrolusite and the friable nature of the sac- charoidal quartz. This study reveals the influence of mineral-fabric on beneficiation of low grade ore, siliceous Mn ore in particular.展开更多
Beneficiation study on samples of baryte ore from Azare in the Plateau State of Nigeria was carried out using chemical analysis, atomic absorption spectrophotometric analysis, jigging and magnetic separation. Results...Beneficiation study on samples of baryte ore from Azare in the Plateau State of Nigeria was carried out using chemical analysis, atomic absorption spectrophotometric analysis, jigging and magnetic separation. Results show that Azare baryte can profitably be concentrated for use in oil drilling and other industrial purposes. Barium sulphate content in the head ore analyzed, is 98%. Comparison between jigging and magnetic separation shows that jigging produces a more satisfactory result.展开更多
文摘Low grade siliceous manganese ores from the iron ore group of the Bonai-Keonjhar belt, Orissa, India are found mostly in shear zones. The ore characteristics of siliceous manganese ore samples from three differ- ent mines, viz. the Shankar (Barbil OMC lease hold area), the Sone-Patuli (Patmunda, OMM lease hold area), and the Musaghar (Roida, OMDC lease hold area), were studied. These siliceous manganese ores are of three types, respectively: (i) spongy-granular; (ii) massive-mosaic; and (iii) hard-mylonitized. The spongy-gran- ular type contains granular, saccharoidal quartz and the major manganese mineral present is pyrolusite. The second type contains well crystallized quartz and cryptomelane, while the third has cherty, fine grained quartz (mylonite) along with romanechite. All three ores were subjected to physical beneficiation under similar conditions. Both gravity and magnetic separation techniques were employed. The mineral-fabric of the ores has been correlated to the extent of their beneficiation using these physical techniques. Of these three ores only the spongy-granular type responded well to upgrading. The feed with 22% Mn content could be upgraded to 44% with a 28% yield and a 49% recovery. The good response to beneficiation of the spongy- granular sample could be due to the large euhedral crystals of pyrolusite and the friable nature of the sac- charoidal quartz. This study reveals the influence of mineral-fabric on beneficiation of low grade ore, siliceous Mn ore in particular.
文摘Beneficiation study on samples of baryte ore from Azare in the Plateau State of Nigeria was carried out using chemical analysis, atomic absorption spectrophotometric analysis, jigging and magnetic separation. Results show that Azare baryte can profitably be concentrated for use in oil drilling and other industrial purposes. Barium sulphate content in the head ore analyzed, is 98%. Comparison between jigging and magnetic separation shows that jigging produces a more satisfactory result.
