Identification of time-varying system and energy-based optimization of adaptive control in seismically excited structure

The combination of structural health monitoring and vibration control is of great importance to provide components of smart structures.While synthetic algorithms have been proposed,adaptive control that is compatible with changing conditions still needs to be used,and time-varying systems are required to be simultaneously estimated with the application of adaptive control.In this research,the identification of structural time-varying dynamic characteristics and optimized simple adaptive control are integrated.First,reduced variations of physical parameters are estimated online using the multiple forgetting factor recursive least squares(MFRLS)method.Then,the energy from the structural vibration is simultaneously specified to optimize the control force with the identified parameters to be operational.Optimization is also performed based on the probability density function of the energy under the seismic excitation at any time.Finally,the optimal control force is obtained by the simple adaptive control(SAC)algorithm and energy coefficient.A numerical example and benchmark structure are employed to investigate the efficiency of the proposed approach.The simulation results revealed the effectiveness of the integrated online identification and optimal adaptive control in systems.

Analysis of the Ore-Controlling Structure of Ductile Shear Zone Type Gold Deposit in Southern Beishan Area, Gansu, Northwest China

The ductile shear zone-type gold deposit is a kind that both the ore-forming mechanism and ore-controlling factors are closely related to the ductile shear zone and its evolution. Ductile shear zone develops in Beishan area, Gansu of Northwest China, and develops especially well in the south belt. The controls of the ductile shear zone on gold deposits are as follows. （1） The regional distribution of gold deposits （and gold spots） is controlled by the ductile shear zone. （2） The ductile-brittle shear zone is formed in the evolution process of ductile shear zone and both are only ore-bearing structures and control the shape, attitude, scale, and distribution of mineralization zones and ore-bodies. （3） Compresso-shear ductile deformation results in that the main kind of gold mineralization is altered mylonite type and the main alteralization is metasomatic. （4） Ore-bearing fracture systems are mainly P-type ones, some D-type and R-type ones, but only individual R＇-type and T-type ones. （5） Dynamic differen- tiation and dynamic metamorphic hydrothermal solution resulting from ductile deformation is one of the sources of ore-forming fluid of gold mineralization, and this is identical with that ore-forming materials are mainly from metamorphic rocks, and ore-forming fluid is mainly composed of metamorphic water, and with the fluid inclusion and geo-chemical characteristics of the deposit. （6） There is a negative correlation between the gold abundance and susceptibility anlsotropy （P） of the altered mylonlte samples from the deposit, which shows that the gold mineralization is slightly later than the structural deformation. All above further expound the ore-forming model of the ductile shear zone type of gold deposits.

Analysis of the ore-controlling structure of the Shihu gold deposit, Hebei Province and deep-seated ore-prospecting prediction

Under the guidance of the theory of mantle-branch structure-associated metallogenesis and on the basis of the geological characteristics, analysis of the ore-forming and ore-controlling structures, the geochemical characteristics of metallogenesis, the source of ore-forming materials, changes in the physical and chemical conditions of metallogenesis, changes in the vertical width of ore veins, and changes in gold grade of the Shihu gold deposit, the mechanism of its metallogenesis was discussed and the rules of vertical variation of ore veins were summarized in this study. It is pointed out that the orebodies under exploitation at present time should be in the middle and upper portions of gold veins in the Shihu gold mining district. Particularly on the basis of the characteristics of mantle-branch structure-associated metallogenesis, it is indicated that metallogenesis is controlled mainly by such ore-forming conditions as temperature and pressure. Deep-seated ore-forming fluids are characterized mainly by injection and precipitation. So the vein bodies in the adjacent metallogenic structures are of obvious comparability, and there would be great prospects for ore search both at depth and in the periphery of the Shihu gold deposit. Therefore, ore prospecting should be strengthened both at depth and in the peripheries.

Analysis of the ore-controlling role of Guojiadian mantle branch structure,Northwest Shandong Peninsula,China

Metallogenesis in the gold ore-concentrated zone of Northwest Shandong Peninsula is closely related to deep processes.The region in the eastern part of North China entered into the stage of mantle plume evolution during the Yanshanian movement,following the long-time stage of stable platform evolution during Paleozoic time.At that time,the ore-concentrated zone of Northwest Shandong Peninsula just entered into the development-evolution stage of the Laiyang sub-mantle plume and the Guojiadian mantle branch structure in its periphery.The core-mantle-source gold was present in the gas-liquid form,and it migrated through mantle plume→sub-mantle plume→mantle branch structure→favorable tectonic expansion zone to the favorable loci of the mantle branch structure,where gold was deposited as ores,thereafter constituting a series of large-to medium-sized gold deposits distributed around the Guojiadian mantle branch structure.This study also dealt with the Jiaojia fault as the main detachment(fault altered rock) belt on the northwestern margin of the mantle branch structure and also presented a basic cognition about the fact that the Sanshandao fault as the listric fault on the hanging wall of the detachment belt.Furthermore,on this basis,this study also pointed out the orientation for further ore prospecting in this region.

Study on the ore-forming and ore-controlling structure of the Mujicun Cu (Mo) ore deposit, Hebei Province, China

The Mujicun Cu (Mo) ore deposit at Laiyuan, Hebei Province, is a currently proven large-sized Cu (Mo) polymetallic ore deposit and it is located in the second-ordered fault depression basin of the ditachment belt on the hanging-wall on the western side at the juncture of the Laiyuan dumbell-shaped complex in the northern part of the Fuping mantle-branch structure. Metallogenesis is controlled by diorite porphyrite in intrusive relation with the fault depression basin and other relevant fault structure systems and intenstive wall-rock alteration zones. This study, in conjunction with the most recent exploration data, analyzed the geological background of metallogenesis of this deposit, summaried the geological characteristics of typical ore deposits, determined the alteration zonation of the deposit, investigated regional metallogenesis and the genesis of typical ore deposits, discussed the regional ore-forming and ore-controlling structures, and generalized the regional ore-controlling model and metallogenic model of the deposit. It is considered that the Mujicun porphry Cu (Mo) deposit, the Tieling, Futuyu, Xiaoligou and other skarn-type Fe-Cu deposits and the He'ergou hydrothermal-type Pb-Zn-Ag deposit jointly constitute a three-in-one polymetallic orefield, with the characteristics of typical metallogenic series.

Characteristics of mantle branch structure in western Shandong and its roles in minerogenesis and ore-controlling

This work deals with the characteristics of mantle branch structure in western Shandong Province, China, with respect to the distribution characteristics and ages of the regional strata, the development of ring-like and radial faults, the development of gently inclined detachment-slip structures in the axial part, mantle-source magmatic activities, regional petrology, petrochemistry and isotope geology. The study indicated that the N-W sharply plunged ductile shear zone in the region of western Shandong cuts through the mantle rocks detached from the deep-seated North China mantle sub-plume, hence leading to unloading in response to depressurization and thereafter the formation of anatexis magma. The intense and complete magmatic evolution series not only manifests a variation trend of alkalinity of magma from high to low and its intrusive depth from deep to shallow, but also reflects that the wall-rock alteration shows a general evolution trend from strong to weak. The evolution of mantle structure played an important role in controlling endo-mineralogenesis, accompanied with the rise of the country rocks. As a result, typical mantle branch structures were formed as observed in western Shandong. At the top of the mantle branch structure was developed an obvious detachment-tilt fault block, and some endogenic ores, at the same time, were uplifted onto the shallow levels.

Structural control of magnetic nanoparticles for positive nuclear magnetic resonance imaging

In addition to the tens of millions of medical doses consumed annually around the world,a vast number of nuclear magnetic resonance imaging(MRI)contrast agents are being deployed in MRI research and development,offering precise diagnostic information,targeting capabilities,and analyte sensing.Superparamagnetic iron oxide nanoparticles(SPIONs)are notable among these agents,providing effective and versatile MRI applications while also being heavy-metal-free,bioconjugatable,and theranostic.We designed and implemented a novel two-pronged computational and experimental strategy to meet the demand for the efficient and rigorous development of SPION-based MRI agents.Our MATLAB-based modeling simulation and magnetic characterization revealed that extremely small maghemite SPIONs in the 1-3 nm range possess significantly reduced transversal relaxation rates(R_(2))and are therefore preferred for positive(T_(1)-weighted)MRI.Moreover,X-ray diffraction and X-ray absorption fine structure analyses demonstrated that the diffraction pattern and radial distribution function of our SPIONs matched those of the targeted maghemite crystals.In addition,simulations of the X-ray near-edge structure spectra indicated that our synthesized SPIONs,even at 1 nm,maintained a spherical structure.Furthermore,in vitro and in vivo MRI investigations showed that our 1-nm SPIONs effectively highlighted whole-body blood vessels and major organs in mice and could be cleared through the kidney route to minimize potential post-imaging side effects.Overall,our innovative approach enabled a swift discovery of the desired SPION structure,followed by targeted synthesis,synchrotron radiation spectroscopic studies,and MRI evaluations.The efficient and rigorous development of our high-performance SPIONs can set the stage for a computational and experimental platform for the development of future MRI agents.

Vibration Control of the Rail Grinding Vehicle with Abrasive Belt Based on Structural Optimization and Lightweight Design

As a new grinding and maintenance technology,rail belt grinding shows significant advantages in many applications The dynamic characteristics of the rail belt grinding vehicle largely determines its grinding performance and service life.In order to explore the vibration control method of the rail grinding vehicle with abrasive belt,the vibration response changes in structural optimization and lightweight design are respectively analyzed through transient response and random vibration simulations in this paper.Firstly,the transient response simulation analysis of the rail grinding vehicle with abrasive belt is carried out under operating conditions and non-operating conditions.Secondly,the vibration control of the grinding vehicle is implemented by setting vibration isolation elements,optimizing the structure,and increasing damping.Thirdly,in order to further explore the dynamic characteristics of the rail grinding vehicle,the random vibration simulation analysis of the grinding vehicle is carried out under the condition of the horizontal irregularity of the American AAR6 track.Finally,by replacing the Q235 steel frame material with 7075 aluminum alloy and LA43M magnesium alloy,both vibration control and lightweight design can be achieved simultaneously.The results of transient dynamic response analysis show that the acceleration of most positions in the two working conditions exceeds the standard value in GB/T 17426-1998 standard.By optimizing the structure of the grinding vehicle in three ways,the average vibration acceleration of the whole car is reduced by about 55.1%from 15.6 m/s^(2) to 7.0 m/s^(2).The results of random vibration analysis show that the grinding vehicle with Q235 steel frame does not meet the safety conditions of 3σ.By changing frame material,the maximum vibration stress of the vehicle can be reduced from 240.7 MPa to 160.0 MPa and the weight of the grinding vehicle is reduced by about 21.7%from 1500 kg to 1175 kg.The modal analysis results indicate that the vibration control of the grinding vehicle can be realized by optimizing the structure and replacing the materials with lower stiffness under the premise of ensuring the overall strength.The study provides the basis for the development of lightweight,diversified and efficient rail grinding equipment.

Synthesis and structures of cdq‑topological quaternary and(4,4,8)‑c topological quinary Zn‑MOFs with both oxalic acid and triazole ligands

Different solvothermal reactions of ZnC2O_(4)with oxalic acid(H_(2)ox)and 1,2,4-triazole(Htrz)successfully gave a new quaternary(NJTU-Bai83,NJTU-Bai=Nanjing Tech University Bai's group)and a new quinary(NJTU-Bai84)anionic metal-organic frameworks(MOFs),where NJTU-Bai83=(Me_(2)NH_(2))2[Zn_(3)(trz)_(2)(ox)_(3)]·2H_(2)O and NJTU-Bai84=(Me_(2)NH_(2))[Zn_(3)(trz)_(3)(ox)_(2)]·H_(2)O,respectively.With the[Zn_(2)(ox)4(trz)_(2)]secondary building unit(SBU)in NJTU-Bai83 replaced by the[Zn_(3)(ox)_(2)(trz)_(6)]and planar[Zn(ox)_(2)(trz)_(2)]ones in NJTU-Bai84,2D supramolecular building layers(SBLs)are changed from the A-layer and B-layer to another A-layer,while pillars are transformed from the tetrahedral[Zn(ox)_(2)(trz)_(2)]SBU to the irregular tetrahedral[Zn(ox)_(2)(trz)_(2)]and planar[Zn(ox)_(2)(trz)_(2)]SBUs.Thus,cdq-topological quaternary NJTU-Bai83 is tuned to(4,4,8)-c new topological quinary NJTU-Bai84.Two MOFs were well characterized by powder X-ray diffraction,thermogravimetric analysis,elemental analysis,etc.CCDC:2351819,NJTU-Bai83;2351820,NJTU-Bai84.

Main controlling factor and mechanism of gas-in-place content of the Lower Cambrian shale from different sedimentary facies in the western Hubei area, South China

The Lower Cambrian shale gas in the western Hubei area,South China has a great resource prospect,but the gas-in-place(GIP)content in different sedimentary facies varies widely,and the relevant mechanism has been not well understood.In the present study,two sets of the Lower Cambrian shale samples from the Wells YD4 and YD5 in the western Hubei area,representing the deep-water shelf facies and shallowwater platform facies,respectively,were investigated on the differences of pore types,pore structure and methane adsorption capacity between them,and the main controlling factor and mechanism of their methane adsorption capacities and GIP contents were discussed.The results show that the organic matter(OM)pores in the YD4 shale samples are dominant,while the inorganic mineral(IM)pores in the YD5 shale samples are primary,with underdeveloped OM pores.The pore specific surface area(SSA)and pore volume(PV)of the YD4 shale samples are mainly from micropores and mesopores,respectively,while those of the YD5 shale samples are mainly from micropores and macropores,respectively.The methane adsorption capacity of the YD4 shale samples is significantly higher than that of the YD5 shale samples,with a maximum absolute adsorption capacity of 3.13 cm^(3)/g and 1.31 cm^(3)/g in average,respectively.Compared with the shallow-water platform shale,the deep-water shelf shale has a higher TOC content,a better kerogen type and more developed OM pores,which is the main mechanism for its higher adsorption capacity.The GIP content models based on two samples with a similar TOC content selected respectively from the Wells YD4 and YD5 further indicate that the GIP content of the deep-water shelf shale is mainly 34 m^(3)/t within a depth range of 1000—4000 m,with shale gas exploration and development potential,while the shallow-water platform shale has normally a GIP content of<1 m^(3)/t,with little shale gas potential.Considering the geological and geochemical conditions of shale gas formation and preservation,the deep-water shelf facies is the most favorable target for the Lower Cambrian shale gas exploration and development in the western Hubei area,South China.

Structural Controls Analysis and Its Correlation with Geothermal Occurrence at Barrier Volcanic Complex (BVC), Turkana, Kenya

Geothermal is a clean energy source that is freely available in the subsurface. The exploitation of this vital resource needs intensive exploration in order to identify and quantify its occurrence. The three parameters considered when assessing the viability of a geothermal system include;heat source, fractures and fluids. Geological structures are important in transportation of fluids to and from the heat source aiding in recharge of the geothermal system and enhancing productivity. Remote sensing method was applied in mapping the structures at Barrier Volcanic Complex (BVC) by using hill shading technique which utilized four illumination angles of the sun (azimuth) i.e. 45°, 90°, 150°, and 315°, constant elevation of 45° and exaggeration of 10. The data used was Shuttle Radar Topographic Mission (SRTM) Satellite Imagery. ArcGIS Software was used for lineaments delineation and density mapping, PCI Geomatica was used to generate major faults, while Georose and Rockworks 17 were used to generate the rose diagrams. Geological structural analysis was done by delineating lineaments, determining the density distribution of lineaments and finally determining the structural trends of lineaments. The generated major faults in the area and the location of the occurrence of surface manifestations were compared with the generated lineaments. A total of 260 lineaments were generated whereby at 45° there was a total of 60 lineaments, at 90° 95 lineaments, at 150° 61 lineaments, and at 315° 44 lineaments. The results of structural analysis in the area as shown by the rose diagrams indicate an NNE-SSW and N-S trending of structures. In conclusion, the study area is highly fractured as indicated by the presence of numerous lineaments. These lineaments provide good recharge to the geothermal system and enhance the geothermal reservoir in the area.

Input Structure Design for Structural Controllability of Complex Networks

This paper addresses the problem of the input design of large-scale complex networks.Two types of network components,redundant inaccessible strongly connected component(RISCC)and intermittent inaccessible strongly connected component(IISCC)are defined,and a subnetwork called a driver network is developed.Based on these,an efficient method is proposed to find the minimum number of controlled nodes to achieve structural complete controllability of a network,in the case that each input can act on multiple state nodes.The range of the number of input nodes to achieve minimal control,and the configuration method(the connection between the input nodes and the controlled nodes)are presented.All possible input solutions can be obtained by this method.Moreover,we give an example and some experiments on real-world networks to illustrate the effectiveness of the method.

Designing Symmetric Gradient Honeycomb Structures with Carbon‑Coated Iron‑Based Composites for High‑Efficiency Microwave Absorption

The impedance matching of absorbers is a vital factor affecting their microwave absorption(MA)properties.In this work,we controllably synthesized Material of Institute Lavoisier 88C(MIL-88C)with varying aspect ratios(AR)as a precursor by regulating oil bath conditions,followed by one-step thermal decomposition to obtain carbon-coated iron-based composites.Modifying the precursor MIL-88C(Fe)preparation conditions,such as the molar ratio between metal ions and organic ligands(M/O),oil bath temperature,and oil bath time,influenced the phases,graphitization degree,and AR of the derivatives,enabling low filler loading,achieving well-matched impedance,and ensuring outstanding MA properties.The MOF-derivatives 2(MD_(2))/polyvinylidene Difluoride(PVDF),MD_(3)/PVDF,and MD4/PVDF absorbers all exhibited excellent MA properties with optimal filler loadings below 20 wt%and as low as 5 wt%.The MD_(2)/PVDF(5 wt%)achieved a maximum effective absorption bandwidth(EAB)of 5.52 GHz(1.90 mm).The MD_(3)/PVDF(10 wt%)possessed a minimum reflection loss(RL_(min))value of−67.4 at 12.56 GHz(2.13 mm).A symmetric gradient honeycomb structure(SGHS)was constructed utilizing the high-frequency structure simulator(HFSS)to further extend the EAB,achieving an EAB of 14.6 GHz and a RL_(min) of−59.0 dB.This research offers a viable inspiration to creating structures or materials with high-efficiency MA properties.

PD-like finite time controller with simple structure for satellite attitude control

A finite time controller with PD-like structure for satellite attitude control is proposed in this paper.The controller is constructed with simple structure based on standard PD controller.The fractional order term is designed hence system could both have strong robustness and finite time convergence rate,and the advantage of finite time control and PD control is combined in this paper.System convergence rate is discussed by Lyapunov method,and the constraint on control parameters is given by implementing the coupled term of angular velocity and attitude quaternion.Moreover,the accuracy at steady stage depending on control parameters is given hence system could converge to this field within finite time.System stability and performance is demonstrated by numerical simulation results.

H∞ Control for Externally Excited Building Structures with Active Mass Damper under Actuator Saturation

This paper investigates the application of active mass dampers to mitigate the vibrations of building structures subjected to unknown external excitations under controller saturation conditions. By utilizing an H∞ control strategy, the optimal state feedback controller is derived by solving the linear matrix inequality problem for controller saturation. Case studies show that the proposed controller is capable of stabilizing the closed-loop system with good control performance and effectively suppressing vibrations in building structures under unknown external excitation. When compared to controllers that do not consider saturation, the proposed controller requires lower gain and results in reduced energy consumption. The research findings provide valuable insights for addressing real-world building structure control problems, contributing to both theoretical significance and practical applications.

Three-Dimensional Normal Stress for Controlling Electronic Structure and Magnetic Property of Fe2Ge

A system study of the three-dimensional normal stress for regulating electronic structure and magnetic property of Fe_2Ge is studied. The density states of Fe more than 92% contribution come from Fe 3d,the density states of Ge mainly contributed from Ge 4p and Ge 4s,and the Fe 3d spin induces the Ge 4p electron transfer. The inductive effect increases germanium electron energy,weakens the Fe spin density of states,opposes the stability of the ferromagnetic state. The magnetic moment varies from 5 to 3 μB with the stress charges from-30 to 30 GPa. The charge of Fe is negative whereas the Ge atom is positively charged,the Fe atom loses charge,the charge transfers to the Ge atom. The unevenly distributed charge forms the newoccupy state and spin polarization state in the Fe_2Ge electron structure system. The Fe is the electron donor,the total electron is transferred to Ge,but the total numbers of gain electron and total numbers of lost electron are not equal,so the Fe_2Ge electron system may have hybridization between the Fe 3d state and Ge 4p state.The magnetic of Fe_2Ge mainly comes from the unoccupied Fe 3d orbital,the Fe 3d is positive spinpolarization state and the spin-polarization strength is decreased,the Ge 4p is negative spin-polarization state and the spin-polarization strength are increased. M oreover,electrons-spin polarization is relevant to the structure parameters of the Fe_2Ge system,and controls spin-polarized electronic behavior by means of adjusting ferromagnetic.

Mechanical analysis of en echelon structure and its significance of controlling earthquakes

The paper deals with the mechanical origin and rules of en echelon folds and their secondary fractures by means of elastic stability theory and nonlinear fracture criterion.Obtains the quantitative relations among en echelon angles of en echelon folds,ratios of boundary stresses and en echelon pitches of shear zone under an action of general boundary forces(tension shear,pure shear or compression shear).As an applied example,the paper researches the displacement field,stress field,distortion energy distribution, state of secondary fractures and energy released by fracturing of en echelon fold structure developed at the east foot of Taihang Mountain.The results of research show that maximum principal (compressive) stresses,maximum shear stresses,high value area of distortion energy are in the nuclear parts of en echelon folds.In these parts compressive fractures were easily developed in approximately parallel with fold axis.So it is verified that the secondary fracture of en echelon folds is a mechanism controlling a strong earthquake.

New strategy for controlling structures collapse against earthquakes

A control strategy for structures subjected to earthquake actions is investigated. The strategy is inspired from the human beings reaction when they are attack by earthquake excitation. Humans realize the earthquake excitation by the neurons, sent this information to the brain, a decision is taken there and by neuron system the decision is sent it back to the muscles for suitable action. In similar way the control strategy consists of monitoring the incoming signal, analyzing it and recognizing its dynamic characteristics, applying the control algorithm for the calculation of the required action, and, finally, applying this action. Thus, the way in which the structure is controlled, and the algorithm that is used, are based on the dynamic characteristics and the frequency content of the applied earthquake signal. The algorithm transforms the earthquake signal and structure into a complex plane and, depending on their relative positions, the equivalent forces that should be applied to the structure by the control devices, which are installed on the building, are calculated. From the numerical results it is shown that the above control procedure is efficient in reducing the response of building structures subjected to earthquake loading, with small amount of required control forces. The influence of time delay and saturation capacity is taken into account. Characteristic buildings controlled by pole placement algorithm and subjected to earthquake excitation are analyzed for a range of levels of time delay and saturation capacity of the control devices. The response reduction surfaces for the combined influence of time delay and force saturation of the controlled buildings are obtained. Conclusions regarding the choice of the control system and the desired properties of the control devices are drawn.

Synthesis of the Core-Shell Structure Materials as the Controlled-Release Drug Carrier

We have developed a controlled-release drug carrier. Smartly controlled-release polymer nanoparticles were firstly synthesized through RAFT polymerization as the controlled-release core. The structural and particle properties of polymer nanoparticles were characterized by nuclear magnetic resonance spectroscopy (1H-NMR), scanning electron microscope (SEM) and X-ray spectroscopy (EDX). Mesoporous materials were selected as the shell materials to encapsulate the smart core as the stable shell. The mesoporous shell was characterized by transmission electron microscopy (TEM) and scanning electron microscope (SEM). All the results showed that a well-defined core-shell structure with mesoporous structure was obtained, and this controllable delivery system will have the great potential in nanomedicine.

Fuzzy variable structure delay control algorithms and their applications to AQM

This paper analyzes the fuzzy variable structure control algorithms for delay systems and describes the compensation mechanism of the integral factor to the effect of the delay. Based on the linearized model of the congestion-avoidance flow-control mode of transmission control protocol (TCP), we present delay control algorithms for active queue management (AQM) and discuss the parameter tuning of the algorithms. The NS (network simulator) simulation results show that the proposed control scheme for the nonlinear TCP/AQM model has good performance and robustness with respect to the uncertainties of the round-trip time (RTT) and the number of active TCP sessions. Compared to other similar schemes, our algorithms perform better in terms of packet loss ratio, throughput and butter fluctuation.