Geological conditions and reservoir characteristics of various shales in major shalehosted regions of China

China is home to shales of three facies:Marine shale,continental shale,and marine-continental transitional shale.Different types of shale gas are associated with significantly different formation conditions and major controlling factors.This study compared the geological characteristics of various shales and analyzed the influences of different parameters on the formation and accumulation of shale gas.In general,shales in China’s several regions exhibit high total organic carbon(TOC)contents,which lays a sound material basis for shale gas generation.Marine strata generally show high degrees of thermal evolution.In contrast,continental shales manifest low degrees of thermal evolution,necessitating focusing on areas with relatively high degrees of thermal evolution in the process of shale gas surveys for these shales.The shales of the Wufeng and Silurian formations constitute the most favorable shale gas reservoirs since they exhibit the highest porosity among the three types of shales.These shales are followed by those in the Niutitang and Longtan formations.In contrast,the shales of the Doushantuo,Yanchang,and Qingshankou formations manifest low porosities.Furthermore,the shales of the Wufeng and Longmaxi formations exhibit high brittle mineral contents.Despite a low siliceous mineral content,the shales of the Doushantuo Formation feature a high carbonate mineral content,which can increase the shales’brittleness to some extent.For marine-continental transitional shales,where thin interbeds of tight sandstone with unequal thicknesses are generally found,it is recommended that fracturing combined with drainage of multiple sets of lithologic strata should be employed to enhance their shale gas production.

Geological characteristics and the origin of ore-forming materials of(Laozhaiwan gold deposit, Yunnan Province

"Golden triangle"area bordered on Yunnan-Guizhou-Guangxi was one of the most important Carlin-type gold deposits concentration areas.Deep understanding of Carlin-type gold deposits in Guizhou and Guangxi Province had reached through several decades studies,but geological environment was very complex in the southeastern Yunnan,and Carlin-type gold deposits produced in the southeastern Yunnan were different from that of America,few studies were taken there.Based on a large number of field work,studies on the geological characteristics combining with geochemistry characteristics were taken,and analysis the genesis of Laozhaiwan gold deposit.The types of alteration in Laozhaiwan gold deposit were mainly silicification and pyritization,and Gold grade was high when silicification and pyritization were both occurred.It could be caculated that fluid density(g/cm3)varied from 0.7 to 4.9,salinity varied from 0.76%to 0.95%and ore-forming pressure(Pa)varied from 1.81×105 to 49.96×105 according to fluid inclusion test results,showed that Laozhaiwan gold deposit was hypabyssal hydrothermal deposit in low temperature and low salinity.According to composition of fluid inclusion analysis,combining with H-O isotope,made theδD-δ18O figure,showed that the fluid of the deposit rooted in formation water and mixed with meteoric waters later.

Geological characteristics of the southern segment of the Late Sinian–Early Cambrian Deyang-Anyue rift trough in Sichuan Basin, SW China

Based on the latest drilling, seismic and field outcrop data, the geological characteristics(e.g. strata, development and sedimentary evolution) of the southern segment of the Late Sinian–Early Cambrian Deyang–Anyue rift trough in the Sichuan Basin are analyzed. First, the strata in the southern segment are complete. The first to second members of Dengying Formation(Deng 1 + Deng 2) are found with relatively stable thickness(400–550 m), and the third to fourth members(Deng 3+ Deng 4) show great thickness difference between the marginal trough and the inner trough, which is up to 250 m. The Cambrian Maidiping Formation and Qiongzhusi Formation in southern Sichuan Basin are relatively thin, with the thickness changing greatly and frequently. Second, the Deyang–Anyue rift trough extended southward during the Deng 4 period, affecting southern Sichuan Basin. Compared to the middle and northern segments of the rift trough, the southern segment is generally wide, gentle and shallow, with multiple steps, and alternating uplifts and sags, which are distributed in finger shape. Third, the Deng 1 + Deng 2 in southern Sichuan Basin records the dominance of carbonate platform and unobvious sedimentary differentiation, and the Deng 4 exhibits obvious sedimentary differentiation, namely, basin–slope–secondary slope–slope–secondary slope–platform margin–restricted platform, from the inner trough to the marginal trough. Fourth, the rift trough in southern Sichuan Basin has evolved in four stages: stabilization of Deng 1–Deng 2, initialization of Deng 3–Deng 4, filling of Maidiping–Qiongzhusi, and extinction of Canglangpu Formation.

Geological characteristics and models of fault-foldfracture body in deep tight sandstone of the second member of Upper Triassic Xujiahe Formation in Xinchang structural belt of Sichuan Basin,SW China

In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.

Characteristics and Prevention of Secondary Geological Disasters of Wenchuan Earthquake

In the research, secondary geological disasters of Wenchuan earthquake were defined and the consequences were illustrated based on geological disasters, such as collapse, landslide and debris flow, and threats of barrier lakes. In addition, the characteristics of secondary disasters were analyzed, as follows： Rupture of geological faults lays foundation in terms of geological structure; loose solids provide resources of an earthquake; abundant rainfall and large runoffs are driving forces of an earthquake; rainstorm, flood, and long-term high temperature are major inducing factors. Furthermore, suggestions on prevention of secondary disasters were proposed in terms of prevention before, at and after an earthquake. Finally, the scientific and practical significances of secondary disasters were illustrated.

Geological and Geochemical Characteristics and Exploration Prospect of Coal-Derived Tight Sandstone Gas in China： Case Study of the Ordos, Sichuan, and Tarim Basins

This work extensively investigated global tight sandstone gas, and geologically and geochemically analyzed the tight sandstone gas in China＇s Ordos, Sichuan, and Tarim basins. We compared typical tight sandstone gas in China with that in North America. We proposed six conditions for the formation of China＇s tight sandstone gas, and illustrated the geological characteristics of tight sandstone gas. In China, gas-bearing tight sandstones were mainly deposited in continental lake deltas and marine-terrigenous facies basin environments, associated with coal-measure strata, and were mostly buried deeper than 2000 in under a formation pressure of 20-30 MPa, with pressure coefficients varying from overpressure to negative pressure. In other countries, tight gas bearing sandstones were dominantly deposited in marine to marine-terrigenous facies environments, occurred in coal-measure strata, and were mostly buried shallower than 2000 m in low-pressure systems. We systematically analyzed tight sandstone gas in the Ordos, Sichuan, and Tarim basins in terms of chemical compositions, geochemical characteristics of carbon isotopes, origins, and sources. Tight sandstone gas in China usually has a hydrocarbon content of 〉95%, with CH4 content 〉90%, and a generally higher dry coefficient. In the three above-mentioned large tight sandstone gas regions,δ13C1 and δJ3C2 mainly ranges from -42%o to -28%o and from -28%o to -21%o, respectively. Type III coal-measure source rocks that closely coexist with tight reservoirs are developed extensively in these gas regions. The organic petrology of source rocks and the carbon isotope compositions of gas indicate that tight sandstone gas in China is dominantly coal-derived gas generated by coal-measure strata. Our analysis of carbon isotope series shows that local isotope reversals are mainly caused by the mixing of gases of different maturities and that were generated at different stages. With increasing maturity, the reversal tendency becomes more apparent. Moreover, natural gas with medium-low maturity （e.g., Xujiahe Formation natural gas in the Sichuan Basin） presents an apparent reversal at a low-maturity stage, a normal series at a medium -maturity stage, and a reversal tendency again at a high-maturity stage. Finally, we proposed four conditions for preferred tight sandstone gas ＂sweep spots,＂ and illustrated the recoverable reserves, proven reserves, production, and exploration prospects of tight sandstone gas. The geological and geochemical characteristics, origins, sources, and exploration potential of tight sandstone gas in China from our research will be instructive for the future evaluation, prediction, and exploration of tight sandstone gas in China and abroad.

Geological characteristics and accumulation mechanisms of the "continuous" tight gas reservoirs of the Xu2 Member in the middle-south transition region,Sichuan Basin,China

＂Continuous＂ tight gas reservoirs are those reservoirs which develop in widespread tight sandstones with a continuous distribution of natural gas. In this paper, we summarize the geological features of the source rocks and ＂＇continuous＂ tight gas reservoirs in the Xujiahe Formation of the middle- south transition region, Sichuan Basin. The source rocks of the Xul Member and reservoir rocks of the Xu2 Member are thick （Xul Member： 40 m, Xu2 Member： 120 m） and are distributed continuously in this study area. The results of drilled wells show that the widespread sandstone reservoirs of the Xu2 Member are charged with natural gas. Therefore, the natural gas reservoirs of the Xu2 Member in the middle-south transition region are ＂continuous＂ tight gas reservoirs. The accumulation of ＂continuous＂ tight gas reservoirs is controlled by an adequate driving force of the pressure differences between source rocks and reservoirs, which is demonstrated by a ＂one-dimensional＂ physical simulation experiment. In this simulation, the natural gas of＂continuous＂ tight gas reservoirs moves tbrward with no preferential petroleum migration pathways （PPMP）, and the natural gas saturation of＂continuous＂ tight gas reservoirs is higher than that of conventional reservoirs.

Distribution Characteristics and Influencing Factors of Geological Hazards in Tibet

Tibet is one of the areas with most serious geological hazards in China, and the distribution of disasters has obvious local charac teristics. Tibet can be classified as three parts through zoning the danger degree, the mountain canyon high danger zone of east and southeast Tibet, the plateau mountain lake basin and valley middle danger zone of south Tibet, and the Plateau Mountain lake basin low danger zone of south Tibet. This paper takes the debris flow, collapse, landslide as the key points to analyze the distribution characteristics of geological hazards, and analyze the factors which influence the distribution of geological hazards, such as terrain landform, formation lithology, geologic structure pattern, precipitation, earthquake, human activity and so on. finally, as a conclusion., in whole Tibet, the geological hazards are more in southeast than in northwest, more in mountainous area which in the edge of plateau and river valley than in the interior of plateau and lake basin. And most hazards distribute in the regions where human activity is stronger than in other regions, for example towns or strips along the highway.

Geological and Geochemical Characteristics and Genesis of the Shaxi Porphyry Copper (Gold) Deposits, Anhui Province

The Shaxi porphyry copper (gold) deposits are a typical example of porphyry copper deposits associated with diorite in eastern China. Quartz diorite, which hosts the deposits, has a Rb-Sr isochron age of 127.9 ± 1.6 Ma. Geochemically, the rock is rich in alkalis (especially sodium), light rare earth elements (LREE) and large-ion lithophile elements (LILE), and has a relatively low initial strontium isotopic ratio (Isr=0.7058); thus it is the product of differentiation of crust-mantle mixing source magma. The model of alteration and mineralization zoning is similar to the Hollister (1974) diorite model. The ore fluids have a relatively high salinity and contain significant amounts of CO2, Ca2+, Na+ and ***CI?. The homogenization temperatures of fluid inclusions for the main mineralization stage range from 280 to 420°C, the δ18O values of the ore fluids vary from 3.51 to 5.52 %, the δD values are in the range between ?82.4 and ?59.8 %, the δ34S values of sulphides vary from ?0.3 to 2.49 %, and the δ13C values of CO2 in inclusions range between ?2.66 and ?6.53 %. Isotope data indicate that the hydrothermal ore fluids and ore substances of the Shaxi porphyry copper (gold) deposits were mainly derived from magmatic systems.

Tectonic Evolution and Geological Characteristics of Hydrocarbon Reservoirs in Marine Mesozoic-Paleozoic Strata in the South Yellow Sea Basin

The South Yellow Sea Basin is the main body of the lower Yangtze area in which marine Mesozoic–Paleozoic strata are widely distributed.The latest geophysical data were used to overcome the limitation of previous poor-quality deep data.Meanwhile,the geological characteristics of hydrocarbon reservoirs in the marine Mesozoic–Paleozoic strata in the South Yellow Sea Basin were analyzed by comparing the source rocks and the reservoir and utilizing drilling and outcrop data.It is believed that the South Yellow Sea Basin roughly underwent six evolutionary stages:plate spreading,plate convergence,stable platform development,foreland basin development,faulted basin development,and depression basin development.The South Yellow Sea Basin has characteristics of a composite platform-fault depression geological structure,with a half-graben geological structure and with a ‘sandwich structure' in the vertical direction.Four sets of hydrocarbon source rocks developed – the upper Permian Longtan–Dalong formation,the lower Permian Qixia formation,the lower Silurian Gaojiabian formation,and the lower Cambrian Hetang formation/Mufushan formation,giving the South Yellow Sea Basin relatively good hydrocarbon potential.The carbonate is the main reservoir rock type in the South Yellow Sea area,and there are four carbonate reservoir types:porous dolomitic,reef-bank,weathered crust,and fractured.There are reservoir-forming horizons similar to the typical hydrocarbon reservoirs in the Yangtze land area developed in the South Yellow Sea,and there are three sets of complete source-reservoir-cap rock assemblages developed in the marine strata,with very good hydrocarbon potential.

Prediction of geological characteristics from shield operational parameters by integrating grid search and K-fold cross validation into stacking classification algorithm

This study presents a framework for predicting geological characteristics based on integrating a stacking classification algorithm(SCA) with a grid search(GS) and K-fold cross validation(K-CV). The SCA includes two learner layers: a primary learner’s layer and meta-classifier layer. The accuracy of the SCA can be improved by using the GS and K-CV. The GS was developed to match the hyper-parameters and optimise complicated problems. The K-CV is commonly applied to changing the validation set in a training set. In general, a GS is usually combined with K-CV to produce a corresponding evaluation index and select the best hyper-parameters. The torque penetration index(TPI) and field penetration index(FPI) are proposed based on shield parameters to express the geological characteristics. The elbow method(EM) and silhouette coefficient(Si) are employed to determine the types of geological characteristics(K) in a Kmeans++ algorithm. A case study on mixed ground in Guangzhou is adopted to validate the applicability of the developed model. The results show that with the developed framework, the four selected parameters, i.e. thrust, advance rate, cutterhead rotation speed and cutterhead torque, can be used to effectively predict the corresponding geological characteristics.

Geological and geochemical characteristics of Middle Jurassic granites in Bengbu uplift, Southeast of North China craton

1 Introduction The early formation and evolution of the North China craton has been widely concerned by scientists.The Bengbu uplift belt is located in the southeast of the craton,theresearch degree of the belt is relatively low and received increasing attention from many scholars in recent years.Through the author’s practical work and combined with

Porosity Distribution Characteristics and Geological Analysis of Brine Storage Medium in the Qaidam Basin, Western China

Underground brine is an unusual water resource that contains abundant mineral resources. It is distributed widely in the Qaidam Basin, western China, a hyperarid inland basin located in the northern Tibetan Plateau. Pores in the brine storage medium act as storage space and transmission channels of underground brine. Therefore, the porosity of brine storage medium determines its ability to store brine. In this study, Mahai Salt Lake was used as the research area as a modern saline lake located in the north area of the Qaidam Basin. A total of 100 porosity samples were collected from eight sampling points in two profiles of the research area at sampling depths of 1.30–314.78 m. The porosity distribution characteristics and influencing factors in brine storage medium were analysed according to the measured porosity data. Based on analysis of the pore structure characteristics, the brine storage medium contains intercrystalline pores, unlike conventional freshwater storage mediums. Moreover, the primary salt rock is susceptible to dissolution by lighter brine, facilitating the formation of secondary porosity. Due to the formation of secondary pores, a porosity greater than 20% remains even at buried depths greater than 100 m. Based on the geological statistical analysis, due to the geographic location, salt formation time, and depositional environment, the porosity values of Mahai Salt Lake do not exhibit a wider distribution, but also show more extreme values than a nearby salt lake. Based on the porosity characteristics by depth, due to the presence of secondary pores, flooding, stratigraphic static pressure, and other factors, porosity shows fluctuations with increasing depth.

Geometrical and Geotechnical Characteristics of Landslides in Korea under Various Geological Conditions

The goal of this study is to determine the geometrical and geotechnical characteristics of landslides under various geological conditions using detailed field surveys, laboratory soil tests and precipitation records. Three study areas are selected to consider different rocks, including gneiss in Jangheung, granite in Sangju and sedimentary rocks in Pohang, South Korea. Many landslides have occurred in these three areas during the rainy season.Precipitation records indicate that landslides occurring in the gneiss area of Jangheung and granite area of Sangju may be influenced by the hourly rainfall intensity rather than cumulative rainfall.However, landslides occurring in the sedimentary rock area of Pohang may be influenced by hourly rainfall intensity and cumulative rainfall. To investigate the factors that influence these types of landslides, a detailed landslide survey was performed and a series of laboratory soil tests were conducted.According to the detailed field survey, most landslides occurred on the flanks of mountain slopes, and the slope inclination where they occurred mostly ranged from 26 to 30 degrees, regardless of the geological conditions. The landslide in the gneiss area of Jangheung is larger than the landslides in the granite area of Sangju and sedimentary rock area of Pohang.Particularly, the landslide in the sedimentary rock area is shorter and shallower than the landslides in the gneiss and granite areas. Thus, the shape and size of the landslide are clearly related to the geological conditions. According to the integrated soil property and landslide occurrence analyses results, the average dry unit weight of the soils from the landslide sites is smaller than that of the soils obtained from the nonlandslide site. The average coefficient of permeability of soils obtained from the landslide sites is greater than that of soils obtained from the non-landslide sites with the same geology. These results indicate that the soils from the landslide sites are more poorly graded or looser than the soils from the non-landslide sites.

Geological and geochemical characteristics and metallogenic model of the Wenquan molybdenum deposit

The Wenquan molybdenum deposit is a kind of large-sized porphyry molybdenum deposit found in re-cent years.In this paper,on the basis of deposit geology,geochemistry and isotope geochronology data,the metal-logenic model of this deposit was established.The Wenquan granitic batholith belongs to the K-rich(alkali-rich) calc-alkaline rock series,which is the mineralization parent rock.The rock massif shows the characteristics of both crust-remelting granite and mantle-source granite.At the same time,the data of REE contents,hydrogen and oxygen isotopes and inclusion temperatures showed that the metallogenic hydrothermal solution is a mixed mesothermal solution of magmato-hydrothermal fluid and meteoric water.Mineralization was dated at 214±7.1 Ma,basically identical with the parent rock's age(207-226 Ma).This reflects that molybdenum mineralization has a close relation to tectonic magmatism evoked by orogenic processes,and molybdenum mineralization occurred mainly at the petrogenesis stage at the late stage of magma emplacement.Mixing with meteoric water led to a decrease in the sa-linity of magmato-hydrothermal solution and changes in other physical and chemical properties.During the tectonic process,ore-bearing hydrothermal solution ascended along favorable fault structure channels.With physicochemical changes,it filled in the surrounding rock joints on both sides of faults,forming ore deposits.

Geological characteristics and genesis of subbottom pinnoite deposit of Da Qaidam salt lake in Qaidam Basin

Da Qaidam salt lake is known for its both liquid and solid boron resource.Data from previous investigation of the Da Qaidam salt lake provided a comparable framework for this study that focused on investigating the section beneath the bottom of the perennial salt lake,including the timing,

A new type of micro-disseminated gold deposits in association with diabase found in Yunnan and Guizhou provinces and Guangxi Zhuang Autonomous Region——Their geological characteristics and metallogenic conditions

With the continuous development of gold ore prospecting and exploration in recent years a new type of micro-disseminated gold deposits have been found in the regions of Southwest Guizhou Province and Northwest Guangxi Zhuang Autonomous Region,with the orebodies directly occurring in diabase or in the contact zone between diabase and strata.The orebodies are strictly controlled by fault structures.The discovery of this type of gold deposits has brought about new prospects for gold ore prospecting in the Yunnan-Guizhou-Guangxi Golden Triangle region.From the preliminary analysis of the geological characteristics of the Qiaoxiang gold deposit in Wangmo County,in combination with the results of research work in the adjacent areas in recent years,this paper roughly described the geological characteristics and metallogenic conditions of this type of gold ore deposits with an attempt to make more and more geologists pay enough attention to this type of gold ore deposits,so as to promote gold ore prospecting in Guizhou Province to develop toward a variety of types of gold deposits in all round way.

Ore-forming fluid characteristics and ore-forming materials source of the Tudimiaogou – Yindongshan lead-zinc polymetallic orefield, west Henan

1 Introduction The Tudimiaogou-Yindongshan lead-zinc polymetallic orefield is located in the Tudimiaogou-Weimoshi lead and zinc silver polymetallic metallogenic belt.The belt is an important part of southwestern Henan lead and zinc

Characteristics of the ore-forming fluid in the Huayuan Pb-Zn ore filed, Northwest of Hunan Province, China

1 Geological Setting The Huayuan Pb-Zn ore field in Xiangxi is located in the southeastern margin of the Yangtze block and the mid-segment of the West Hunan-West Hubei metallogenic belt.The exposed stratum are the lower