When a steel plate produced by a steel plant leaves the factory,its upper surface should be marked with the specification,variety,batch number,and other identifying information,and its side should be marked with a sid...When a steel plate produced by a steel plant leaves the factory,its upper surface should be marked with the specification,variety,batch number,and other identifying information,and its side should be marked with a side marking.The side marking contains the plate number,specification,batch number,and other information,which are convenient for customers to accurately identify relevant information after stacking.However,because of the influence of weather,environment,and other factors,the side marking becomes unidentifiable when the steel plate is corroded,affecting the customer’s loading,unloading,and other operations.The development and application of side anticorrosion devices and cleaning of finished heavy steel plates with antirust agents will solve the problem of unrecognizable side marking due to corrosion.展开更多
针对当前集成了不同厂家几套子系统的一些燃驱压缩机组控制系统结构复杂、维护成本高等问题,应用基于Mark VIe控制平台来升级改造该系统。以某改造项目为例,应用双冗余Mark VIe控制系统架构,Mark VIe SIL3模件作为紧急停机和火气保护系...针对当前集成了不同厂家几套子系统的一些燃驱压缩机组控制系统结构复杂、维护成本高等问题,应用基于Mark VIe控制平台来升级改造该系统。以某改造项目为例,应用双冗余Mark VIe控制系统架构,Mark VIe SIL3模件作为紧急停机和火气保护系统的硬件,同时采用Mark VIe ControlST统一软件平台。结果表明:新控制系统采用了一体化硬件、软件设计,提高了机组控制系统的安全可靠性,有利于日常运行维护,而且新系统具有在线监测功能,有助于系统故障排查。展开更多
佳能Cinema EOS电影摄影机EOS C500 Mark II日前发布了新固件版本1.1.1.1。经过此次固件升级,EOS C500 Mark II可支持三种新增的Cinema RAW Light记录格式:具有高画质的RAW HQ模式、标准画质的RAW ST模式和精简记录可以延长记录时间的RA...佳能Cinema EOS电影摄影机EOS C500 Mark II日前发布了新固件版本1.1.1.1。经过此次固件升级,EOS C500 Mark II可支持三种新增的Cinema RAW Light记录格式:具有高画质的RAW HQ模式、标准画质的RAW ST模式和精简记录可以延长记录时间的RAW LT模式。展开更多
Objective:To evaluate the reliability and validity of the MSCPOR used in China.Methods:45 subjects with OCD,35 subjects with phobias and 35 subjects with anxiety were selected as patient group,and 44 healthy persons w...Objective:To evaluate the reliability and validity of the MSCPOR used in China.Methods:45 subjects with OCD,35 subjects with phobias and 35 subjects with anxiety were selected as patient group,and 44 healthy persons were selected as control group.All subjects were rated according to the Chinese version of the MSCPOR,the Yale-Brown Obsessive Compulsive Scale(Y-BOCS)and the Hamilton Anxiety Scale(HAMA).Two or three weeks after the first rating,16 health persons were re=rated by MSCPOR;12 patients were re-rated with MSCPOR,Y-BOCS and HAMA.15 subjects were rated with MSCPOR and scored by two independent raters at the same time.Results:Test-retest reliability was 0.72～0.99;the homogeneity reliability(Chronbach’s α )in the OCD group were 0.82～0.88 and in phobias group 0.78～0.82;Spearman correlation coefficients were 0.35～0.94 in OCD group and 0.30～0.84 in phobias group;the inter-rater reliability(kappa index) were 0.53～1.For validity,correlation coefficients( γ )among different dimension of MSCPOR in OCD group was 0.36～0.92 and 0.10～0.80 in phobias group.Spearman correlation coefficients between MSCPOR vs Y-BOCS scores and MSCPOR vs HAMA were 0.62 and 0.41～0.44.The results of discriminate analysis showed that diagnosis error for MSCPOR was 40.1%.Conclusion:The reliability and validity of MSCPOR used in China were satisfactory;MSCPOR isn’t a suitable instrument for diagnosis but good for symptom assessment.展开更多
The BOCOG promoted the protection of Olympic intellectual property rights(知识产权)by giving out leaflets(传单),showing display boards and playing promotional videos to the public at Beijing Lufthansa Friendship Shopp...The BOCOG promoted the protection of Olympic intellectual property rights(知识产权)by giving out leaflets(传单),showing display boards and playing promotional videos to the public at Beijing Lufthansa Friendship Shopping Mall in eastern part of Beijing on the moming of April 26, 2005. The promotional activity was jointly held by the BOCOG legal department and the Chaoyang Branch of Beijing Adminis tration of Industry and Commerce(BAIC).展开更多
As more and more Chinese products are getting into foreign markets,it is important to translate a Chinese trade mark into English properly. This paper points out what is a trade mark and its importance in the modern w...As more and more Chinese products are getting into foreign markets,it is important to translate a Chinese trade mark into English properly. This paper points out what is a trade mark and its importance in the modern world. It then gives reason why it is necessary to translate the Chinese trade marks properly into English. It also gives the standard of a good trade mark. Furthermore it analyses several kinds of improper translation and the cause of these mistakes. Last it introduces the main rules and three main skills of translation of trade marks.展开更多
Quantitative analyses of the spatial distribution of fault structures can provide a theoretical basis for forecasting prospective ore deposits. Characteristics and complexity of fault structure distribution in the Qit...Quantitative analyses of the spatial distribution of fault structures can provide a theoretical basis for forecasting prospective ore deposits. Characteristics and complexity of fault structure distribution in the Qitianling area, Southern Hunan Province, China, were quantitatively calculated and appraised by fractal and multifractal methods to evaluate the relation between fault structures and ore-prospecting potential. The results show that the lengths of faults can be modeled as multifractals. Multifractal spectra evidently reflect the characteristics of the scaling of fault structures. The box- counting dimension value （D） of fault structures is equal to 1.656, as indicates complexity of the spatial distribution of faults and favorable structural conditions for the formation of ore deposits. Moreover, the D values of sub-regions were calculated and isopleths of their fractal dimension values were plotted accordingly. Overlay analyses of isopleths of fractal dimension values and distributions of known ore deposits show that areas with the larger fractal dimension values of fault structures have more ore deposits. This spatial coupling relationship between D values and ore deposits can be used to forecast and explore other ore deposits. On the basis of complexity theory for ore-forming systems, three exploration targets with high D values were delineated as prospective ore deposits.展开更多
Several 2-D displacement sensing methods are reviewed. As to the crossdiffraction grating, there is no absolute zero-reference. In regards to the optical fiber method,the output signal is affected greatly by the quali...Several 2-D displacement sensing methods are reviewed. As to the crossdiffraction grating, there is no absolute zero-reference. In regards to the optical fiber method,the output signal is affected greatly by the quality of the reflecting surface and it is hard to gethigh resolution. Considering the concentric-circle gratings, the displacement can only be gainedwith complicated calculating of the experiment data. Compared with the advantages and limitations ofthe methods above, a novel 2-D zero-reference mark is especially proposed and demonstrated. Thiskind of mark has an absolute zero-reference when used in pair, and the experimental result is simpleto dispose. By superimposing a pair of specially coded 2-D marks, the correct alignment position ofthe two marks can be detected by the maximum output of the sharp intensity peak. And each slope ofthe peak is of good linearity which can be used to achieve high resolution in positioning andalignment in two dimensions. Design and fabrication of such 2-D zero-reference marks are introducedin detail. The experiment results are agreed with the theoretical ones.展开更多
In recent years, the flow of the Yellow River has often been interrupted, which has resulted in exposure of channel bars and point bars, and even extensive exposure of the riverbed. Consequently, a large number of ril...In recent years, the flow of the Yellow River has often been interrupted, which has resulted in exposure of channel bars and point bars, and even extensive exposure of the riverbed. Consequently, a large number of rill marks have developed. They are diverse in morphology. According to the hydrodynamic types of their formation, they can be grouped into 6 categories, i. e. the wave eroded, backwash, seepage, rain eroded, water drainage and runoff rill marks. Morphologically, they can be divided into more than ten types: the linear, tooth shaped, comb shaped, fence like, ear like, braided, branched, leaf like, flower like, root like, dendritic, net like, radial etc. Their cross sections include the broad u type (the width/depth ratio is over 2, and may reach 10—20), U type (width/depth ratio from 1 to 2), V type, Ω type and ( type. Their occurrences may be attributed to the variations in composition, grain size, color, fabric and morphology. They have 5 scales: the micro scale (length and width within 1 cm), small scale (length and width within 10 cm), medium scale (length and width ranging from 10—100cm), large scale (length and width 1—5 m) and giant-scale (length or width over 5 m).展开更多
The tire mark is the important legacy information left at the accident scene. Based on the vehicle collision dynamics model, this study provided an optimized algorithm with vehicle final location and other related inf...The tire mark is the important legacy information left at the accident scene. Based on the vehicle collision dynamics model, this study provided an optimized algorithm with vehicle final location and other related information for the tire marks. When the tire marks simulation results fit the real one well, the state of vehicle can be understood as the real state in the accident. Based on above, the vehicle velocity and direction are decided. According to the velocity and direction of the vehicle, the complete accident process can be simulated. With the help of the Pc-Crash software, the method has been applied in typical collision accident cases analysis. The reconstruction results will provide the scientific and numerical references for vehicle collision accidents analyzing and appraising.展开更多
The cause of stop marks of fabrics in weaving is introduced, and the floating displacement of the cloth fell during loom stoppage is a primary cause of stop marks. The stop marks caused by fabric system are analyzed. ...The cause of stop marks of fabrics in weaving is introduced, and the floating displacement of the cloth fell during loom stoppage is a primary cause of stop marks. The stop marks caused by fabric system are analyzed. A new method to eliminate stop marks by using the electronic let-off system is presented. This new method needn't any special detecting equipment, it can control the fell position by the powerful control program,so the cost is decreased greatly. The method is so flexible that can be applied to weaving all kinds of fabrics.展开更多
The micro-characteristics of the streaky marks and the corresponding substrate surface of galvannealed （GA） steel sheets have been investigated using SEM and FIB.The streaky mark area seems to have many cavities,sim...The micro-characteristics of the streaky marks and the corresponding substrate surface of galvannealed （GA） steel sheets have been investigated using SEM and FIB.The streaky mark area seems to have many cavities,similar to craters,which scatter light and make the surface appear darker when compared with the surrounding normal area.Moreover,it is found that the irregularity or difference in steel grain size tends to affect the surface quality of the GA steel sheets.During alloying,the diffusion speed of Zn-Fe on the grain boundary is faster than that at the center of the grain,which results in the selective formation of crater-like morphology in the coating area with larger steel grains.Due to the clear grain boundary of IF steel,apparent streaky marks will be formed on the coating,if the IF steel surface consists of grains of irregular size.展开更多
文摘When a steel plate produced by a steel plant leaves the factory,its upper surface should be marked with the specification,variety,batch number,and other identifying information,and its side should be marked with a side marking.The side marking contains the plate number,specification,batch number,and other information,which are convenient for customers to accurately identify relevant information after stacking.However,because of the influence of weather,environment,and other factors,the side marking becomes unidentifiable when the steel plate is corroded,affecting the customer’s loading,unloading,and other operations.The development and application of side anticorrosion devices and cleaning of finished heavy steel plates with antirust agents will solve the problem of unrecognizable side marking due to corrosion.
文摘针对当前集成了不同厂家几套子系统的一些燃驱压缩机组控制系统结构复杂、维护成本高等问题,应用基于Mark VIe控制平台来升级改造该系统。以某改造项目为例,应用双冗余Mark VIe控制系统架构,Mark VIe SIL3模件作为紧急停机和火气保护系统的硬件,同时采用Mark VIe ControlST统一软件平台。结果表明:新控制系统采用了一体化硬件、软件设计,提高了机组控制系统的安全可靠性,有利于日常运行维护,而且新系统具有在线监测功能,有助于系统故障排查。
文摘佳能Cinema EOS电影摄影机EOS C500 Mark II日前发布了新固件版本1.1.1.1。经过此次固件升级,EOS C500 Mark II可支持三种新增的Cinema RAW Light记录格式:具有高画质的RAW HQ模式、标准画质的RAW ST模式和精简记录可以延长记录时间的RAW LT模式。
文摘Objective:To evaluate the reliability and validity of the MSCPOR used in China.Methods:45 subjects with OCD,35 subjects with phobias and 35 subjects with anxiety were selected as patient group,and 44 healthy persons were selected as control group.All subjects were rated according to the Chinese version of the MSCPOR,the Yale-Brown Obsessive Compulsive Scale(Y-BOCS)and the Hamilton Anxiety Scale(HAMA).Two or three weeks after the first rating,16 health persons were re=rated by MSCPOR;12 patients were re-rated with MSCPOR,Y-BOCS and HAMA.15 subjects were rated with MSCPOR and scored by two independent raters at the same time.Results:Test-retest reliability was 0.72～0.99;the homogeneity reliability(Chronbach’s α )in the OCD group were 0.82～0.88 and in phobias group 0.78～0.82;Spearman correlation coefficients were 0.35～0.94 in OCD group and 0.30～0.84 in phobias group;the inter-rater reliability(kappa index) were 0.53～1.For validity,correlation coefficients( γ )among different dimension of MSCPOR in OCD group was 0.36～0.92 and 0.10～0.80 in phobias group.Spearman correlation coefficients between MSCPOR vs Y-BOCS scores and MSCPOR vs HAMA were 0.62 and 0.41～0.44.The results of discriminate analysis showed that diagnosis error for MSCPOR was 40.1%.Conclusion:The reliability and validity of MSCPOR used in China were satisfactory;MSCPOR isn’t a suitable instrument for diagnosis but good for symptom assessment.
文摘The BOCOG promoted the protection of Olympic intellectual property rights(知识产权)by giving out leaflets(传单),showing display boards and playing promotional videos to the public at Beijing Lufthansa Friendship Shopping Mall in eastern part of Beijing on the moming of April 26, 2005. The promotional activity was jointly held by the BOCOG legal department and the Chaoyang Branch of Beijing Adminis tration of Industry and Commerce(BAIC).
文摘As more and more Chinese products are getting into foreign markets,it is important to translate a Chinese trade mark into English properly. This paper points out what is a trade mark and its importance in the modern world. It then gives reason why it is necessary to translate the Chinese trade marks properly into English. It also gives the standard of a good trade mark. Furthermore it analyses several kinds of improper translation and the cause of these mistakes. Last it introduces the main rules and three main skills of translation of trade marks.
基金financially supported by the China Geological Survey Project(Grant No.1212011121101)
文摘Quantitative analyses of the spatial distribution of fault structures can provide a theoretical basis for forecasting prospective ore deposits. Characteristics and complexity of fault structure distribution in the Qitianling area, Southern Hunan Province, China, were quantitatively calculated and appraised by fractal and multifractal methods to evaluate the relation between fault structures and ore-prospecting potential. The results show that the lengths of faults can be modeled as multifractals. Multifractal spectra evidently reflect the characteristics of the scaling of fault structures. The box- counting dimension value （D） of fault structures is equal to 1.656, as indicates complexity of the spatial distribution of faults and favorable structural conditions for the formation of ore deposits. Moreover, the D values of sub-regions were calculated and isopleths of their fractal dimension values were plotted accordingly. Overlay analyses of isopleths of fractal dimension values and distributions of known ore deposits show that areas with the larger fractal dimension values of fault structures have more ore deposits. This spatial coupling relationship between D values and ore deposits can be used to forecast and explore other ore deposits. On the basis of complexity theory for ore-forming systems, three exploration targets with high D values were delineated as prospective ore deposits.
基金This project is supported by National Natural Science Foundation of China(No.50335050, No.50275140)Specialized Research Foundation for Doctoral Program of Higher Education (SRFDP) of China(No. 20030358020).
文摘Several 2-D displacement sensing methods are reviewed. As to the crossdiffraction grating, there is no absolute zero-reference. In regards to the optical fiber method,the output signal is affected greatly by the quality of the reflecting surface and it is hard to gethigh resolution. Considering the concentric-circle gratings, the displacement can only be gainedwith complicated calculating of the experiment data. Compared with the advantages and limitations ofthe methods above, a novel 2-D zero-reference mark is especially proposed and demonstrated. Thiskind of mark has an absolute zero-reference when used in pair, and the experimental result is simpleto dispose. By superimposing a pair of specially coded 2-D marks, the correct alignment position ofthe two marks can be detected by the maximum output of the sharp intensity peak. And each slope ofthe peak is of good linearity which can be used to achieve high resolution in positioning andalignment in two dimensions. Design and fabrication of such 2-D zero-reference marks are introducedin detail. The experiment results are agreed with the theoretical ones.
基金supported by the Major State Basic Research Program under the grant No.G1999043603National Natural Science Foundation of China(No.409972037)National Natural Science Foundation of Shandang province(No.Q99E01)
文摘In recent years, the flow of the Yellow River has often been interrupted, which has resulted in exposure of channel bars and point bars, and even extensive exposure of the riverbed. Consequently, a large number of rill marks have developed. They are diverse in morphology. According to the hydrodynamic types of their formation, they can be grouped into 6 categories, i. e. the wave eroded, backwash, seepage, rain eroded, water drainage and runoff rill marks. Morphologically, they can be divided into more than ten types: the linear, tooth shaped, comb shaped, fence like, ear like, braided, branched, leaf like, flower like, root like, dendritic, net like, radial etc. Their cross sections include the broad u type (the width/depth ratio is over 2, and may reach 10—20), U type (width/depth ratio from 1 to 2), V type, Ω type and ( type. Their occurrences may be attributed to the variations in composition, grain size, color, fabric and morphology. They have 5 scales: the micro scale (length and width within 1 cm), small scale (length and width within 10 cm), medium scale (length and width ranging from 10—100cm), large scale (length and width 1—5 m) and giant-scale (length or width over 5 m).
基金Sponsored by the National Natural Science Foundation of China (Grant No.60174023)the National High Technology Research and Development Program of China(Grant No.863 -2007AA11Z234).
文摘The tire mark is the important legacy information left at the accident scene. Based on the vehicle collision dynamics model, this study provided an optimized algorithm with vehicle final location and other related information for the tire marks. When the tire marks simulation results fit the real one well, the state of vehicle can be understood as the real state in the accident. Based on above, the vehicle velocity and direction are decided. According to the velocity and direction of the vehicle, the complete accident process can be simulated. With the help of the Pc-Crash software, the method has been applied in typical collision accident cases analysis. The reconstruction results will provide the scientific and numerical references for vehicle collision accidents analyzing and appraising.
文摘The cause of stop marks of fabrics in weaving is introduced, and the floating displacement of the cloth fell during loom stoppage is a primary cause of stop marks. The stop marks caused by fabric system are analyzed. A new method to eliminate stop marks by using the electronic let-off system is presented. This new method needn't any special detecting equipment, it can control the fell position by the powerful control program,so the cost is decreased greatly. The method is so flexible that can be applied to weaving all kinds of fabrics.
文摘The micro-characteristics of the streaky marks and the corresponding substrate surface of galvannealed （GA） steel sheets have been investigated using SEM and FIB.The streaky mark area seems to have many cavities,similar to craters,which scatter light and make the surface appear darker when compared with the surrounding normal area.Moreover,it is found that the irregularity or difference in steel grain size tends to affect the surface quality of the GA steel sheets.During alloying,the diffusion speed of Zn-Fe on the grain boundary is faster than that at the center of the grain,which results in the selective formation of crater-like morphology in the coating area with larger steel grains.Due to the clear grain boundary of IF steel,apparent streaky marks will be formed on the coating,if the IF steel surface consists of grains of irregular size.
