Numerical Study of Optimization of Layer Thickness in Bilayer Organic Light-Emitting Diodes

A numerical model for bilayer organic light-emitting diodes (OLEDs) is developed under the basis of trapped charge limited conduction.The dependences of the current density on the layer thickness,trap properties and carrier mobility of the hole transport layer (HTL) and emission layer (EML) in bilayer OLEDs of the structure anode/HTL/EML/cathode are numerically investigated.It is found that,for given values of the total thickness of organic layers,reduced depth of trap,total density of trap,and carrier mobility of HTL as well as EML,there exists an optimal thickness ratio of HTL to EML,by which a maximal quantum efficiency can be achieved.Through optimization of the thickness ratio,an enhancement of current density and quantum efficiency of as much as two orders of magnitude can be obtained.The dependences of the optimal thickness ratio to the characteristic trap energy,total density of trap and carrier mobility are numerically analyzed.

Very-High Color Rendering Index Hybrid White Organic Light-Emitting Diodes with Double Emitting Nanolayers

A very-high color rendering index white organic light-emitting diode(WOLED) based on a simple structure was successfully fabricated. The optimized device exhibits a maximum total efficiency of 13.1 and 5.4 lm/W at 1,000 cd/m2. A peak color rendering index of 90 and a relatively stable color during a wide range of luminance were obtained. In addition, it was demonstrated that the 4,40,400-tri(9-carbazoyl) triphenylamine host influenced strongly the performance of this WOLED.These results may be beneficial to the design of both material and device architecture for high-performance WOLED.

Organic Light Emitting Diodes with Lithium Contained Alq3 as Electron Injection Layer

lNovel lithium doped tris 8 hydroxylquinoline aluminium(Alq3:Li) layer is deposited between emission layer and electron injection aluminium electrode as an electron injection assistant layer in different organic light emitting diodes(OLED) to lower the electron injection barrier. In these devices, Alq3 is used as emission layer, and a bilayer film of N,N bis (1 naphhyl) N,N diphenyl 1,1 biphenyle 4,4' diamine(NPB) and 4,4,4' tris(3 methyl phenylphenylamino) triphenylamine( m MTDATA) used as hole transport layer(HTL). The electroluminescent performance of devices with different thicknesses of Alq3∶Li shows that the insertion of the lithium doped Alq3 layer can reduce the turn on voltage by at least 2 volts, and the stability of devices with this lithium doped Alq3 layer is improved too. It can also change the efficiency of devices. Compared with an ultra thin lithium fluoride(LiF) layer, Alq3∶Li sheet gives similar effects but higher efficiency and can be much thicker and hence it is easier to control the deposition.

Influence of Transparent Anode on Luminescent Performance of Near-infrared Organic Light-emitting Diodes

The optical transmission（200--2000 nm）, sheet resistance and work functions of indium-tin oxide（ITO）（100 Ω/）, ITO（12 Ω/）, zinc-oxide（ZnO）, aluminum-doped ZnO（AZO） and polyaniline（PANI） films were investigated. Near-infrared organic light-emitting diodes（NIR-OLEDs） emitting around 1.54 μm based on Er（DBM）3Phen with ITO（100 Ω/）, ITO（12 Ω/） and PANI as anodes, respectively, were fabricated. The device structure was anode/4＂-tris（N-3-methylphenyl-N-phenyl-amino）-triphenylamine（m-MTDATA）/ N,N＇-di-l-naphthyl- N,N＇-diphenylbenzidine（NPB）/Er（DBM）3Phen/tris-（8-hydroxyquinoline） aluminum（Alq3）/A1. The results suggest that the performance of NIR-OLEDs with ITO（100 Ω/）, which has a lower Sn content, as anodes appear to be better than that of NIR-OLEDs with ITO（12 Ω/） and PANI as anodes, respectively. The high N1R transmittance of ITO（100 Ω/） is a major reason for the relatively high NIR EL efficiency. The more balanced holes and electrons in the device based on ITO（100 Ω/） are another reasons.

Organic light emitting diodes using magnesium doped organic acceptor as electron injection layer and silver as cathode

Organic light emitting diodes employing magnesium doped electron acceptor 3, 4, 9, 10 perylenetetracarboxylic dianhydride （Mg：PTCDA） as electron injection layer and silver as cathode were demonstrated. As compared to Mg ： Ag cathode, the combination of the Mg ： PTCDA layer and silver provided enhanced electron injection into tris （8- quinolinolato） aluminium. The device with 1 ： 2 Mg ： PTCDA and Ag showed an increase of about 12% in the maximum current efficiency, mainly due to the improved hole-electron balance, and an increase of about 28% in the maximum power efficiency, as compared to the control device using Mg ： Ag cathode. The properties of Mg ： PTCDA composites were studied as well.

Highly Efficient Greenish-Yellow Phosphorescent Organic Light-Emitting Diodes Based on a Novel 2,3-Diphenylimidazo[1,2-a]Pyridine Iridium(Ⅲ) Complex

A cyclometalated greenish-yellow emitter 2,3-diphenylimidazo[1,2-a]pyridine iridium（Ill） complex is successfully synthesized and used to fabricate phosphorescent organic light-emitting diodes. The optimized device exhibits a greenish-yellow emission with the peak at 523nm and a strong shoulder at 557nm, corresponding to Commission Internationale de l＇Eclairage coordinates of （0.38, 0.68）. The full width at half maximum of the device is 93 nm, which is broader than the fac-tris（2-phenylpyridine）iridium [Ir（ppy）3] based reference device of 78 nm. Meanwhile, a maximum current efficiency of 62.6 cd/A （47.51m/W） is obtained. This result is higher than a maximum current efficiency of 54.8 cd/A （431m/W） of the Ir（ppy）a based device. The results indicate that this new iridium complex may have potential applications in fabricating high color rendering index white organic light emitting diodes.

Low Temperature DC Sputtering Deposition on Indium-Tin Oxide Film and Its Application to Inverted Top-emitting Organic Light-emitting Diodes

Indium tin oxide （ITO） ultrathin films were prepared on glass substrate by DC （direct current） magnetron sputtering technique with the assistance of H2O vapor to avoid potential surface damage. The film properties were characterized by X-ray diffraction （XRD） technique, four-point probe method and spectrophotometer. The results show that the deposited ITO film with introduced H2O during sputtering process was almost amorphous. The average visible light transmission of 100 nm ITO film was around 85% and square resistivity was below 80 Ω/square. The film was used as the transparent anode to fabricate an inverted top-emitting organic light-emitting diodes （IT-OLEDs） with the structure of glass substrate/Alq3 （40 nm）/NPB （15 nm）/CuPc （x nm）/ITO anode （100 nm）, where the film thickness of CuPc was optimized. It was found that the luminance of this IT-OLEDs was improved from 25 cd/m^2 to more than 527 cd/m^2 by increasing the thickness of CuPc, and luminance efficiency of 0.24 lm/W at 100 cd/m^2 was obtained, which indicated that the optimized thickness of CuPc layer was around 15 nm.

Regulating Charge and Exciton Distribution in High-Performance Hybrid White Organic Light-Emitting Diodes with n-Type Interlayer Switch

The interlayer(IL) plays a vital role in hybrid white organic light-emitting diodes(WOLEDs); however,only a negligible amount of attention has been given to n-type ILs. Herein, the n-type IL, for the first time,has been demonstrated to achieve a high efficiency, high color rendering index(CRI), and low voltage trade-off.The device exhibits a maximum total efficiency of 41.5 lm W^(-1), the highest among hybrid WOLEDs with n-type ILs. In addition, high CRIs(80–88) at practical luminances(C1000 cd m^(-2)) have been obtained, satisfying the demand for indoor lighting. Remarkably, a CRI of 88 is the highest among hybrid WOLEDs. Moreover, the device exhibits low voltages, with a turn-on voltage of only 2.5 V([1 cd m^(-2)), which is the lowest among hybrid WOLEDs. The intrinsic working mechanism of the device has also been explored; in particular, the role of n-type ILs in regulating the distribution of charges and excitons has been unveiled. The findings demonstrate that the introduction of n-type ILs is effective in developing high-performance hybrid WOLEDs.

Fine-tuning the thicknesses of organic layers to realize high-efficiency and long-lifetime blue organic light-emitting diodes

By using p-bis（p - N, N-diphenyl-aminostyryl）benzene doped 2-tert-butyl-9, 10-bis-β-naphthyl）-anthracene as an emitting layer, we fabricate a high-efficiency and long-lifetime blue organic light emitting diode with a maximum external quantum efficiency of 6.19% and a stable lifetime at a high initial current density of 0.0375 A/cm2. We demonstrate that the change in the thicknesses of organic layers affects the operating voltage and luminous efficiency greater than the lifetime. The lifetime being independent of thickness is beneficial in achieving high-quality full-colour display devices and white lighting sources with multi-emitters.

Tetraalkyl-substituted zinc phthalocyanines used as anode buffer layers for organic light-emitting diodes

Two soluble tetraalkyl-substituted zinc phthalocyanines(ZnPcs)for use as anode buffer layer materials in tris(8-hydroxyquinoline)aluminum(Alq3)-based organic light-emitting diodes(OLEDs)are presented in this work.The holeblocking properties of these Zn Pc layers slowed the hole injection process into the Alq3 emissive layer greatly and thus reduced the production of unstable cationic Alq3(Alq3^+)species.This led to the enhanced brightness and efficiency when compared with the corresponding properties of OLEDs based on the popular poly-(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)buffer layer.Furthermore,because of the high thermal and chemical stabilities of these Zn Pcs,a nonaqueous film fabrication process was realized together with improved charge balance in the OLEDs and enhanced OLED lifetimes.

White organic light-emitting diodes based on electroplex from polyvinyl carbazole and carbazole oligomers blends

White organic light-emitting diodes with a blue emitting material fluorene-centred ethylene-liked carbazole oligomer （Cz6F） doped into polyvinyl carbazole （PVK） as the single light-emitting layer are reported. The optical properties of Cz6F, PVK, and PVK：Cz6F blends are studied. Single and double layer devices are fabri- cated by using PVK： Cz6F blends, and the device with the configuration of indium tin oxide （ITO）/PVK：Cz6F/ tris（8-hydroxyquinolinate）aluminium （Alq3）/LiF/A1 exhibits white light emission with Commission Internationale de l＇Eclairage chromaticity coordinates of （0.30, 0.33） and a brightness of 402 cd/m^2. The investigation reveals that the white light is composed of a blue-green emission originating from the excimer of Cz6F molecules and a red emission from an electroplex from the PVK：Cz6F blend films.

Tandem white organic light-emitting diodes adopting a C_(60) :rubrene charge generation layer

Organic bulk heterojunction fullerence(C60) doped 5, 6, 11, 12-tetraphenylnaphthacene(rubrene) as the high quality charge generation layer(CGL) with high transparency and superior charge generating capability for tandem organic light emitting diodes(OLEDs) is developed. This CGL shows excellent optical transparency about 90%, which can reduce the optical interference effect formed in tandem OLEDs. There is a stable white light emission including 468 nm and 500 nm peaks from the blue emitting layer and 620 nm peak from the red emitting layer in tandem white OLEDs. A high efficiency of about 17.4 cd/A and CIE coordinates of(0.40, 0.35) at 100 cd/m2 and(0.36, 0.34) at 1000 cd/m2 have been demonstrated by employing the developed CGL, respectively.

Improved performance of organic light-emitting diodes with dual electron transporting layers

In this study the performance of organic light-emitting diodes （OLEDs） are enhanced significantly, which is based on dual electron transporting layers （13phen/CuPc）. By adjusting the thicknesses of Bphen and CuPc, the maximal luminescence, the maximal current efficiency, and the maximal power efficiency of the device reach 17570 cd/m^2 at 11 V, and 5.39 cd/A and 3.39 lm/W at 3.37 mA/cm^2 respectively, which are enhanced approximately by 33.4%, 39.3%, and 68.9%, respectively, compared with those of the device using Bphen only for an electron transporting layer. These results may provide some valuable references for improving the electron injection and the transportation of OLED.

Influence of Energy Level Matching on Device Performances of Organic Light-emitting Diodes

Through experiments and computer simulation,the influence of the energy levels of organic materials and electrode materials in the organic light-emitting diodes (OLEDs) on the device performances is discussed.Results show that the device performances are influenced by not only the carrier injection barriers at the electrode interface but also the barriers at the organic heterojunction interface.This result is helpful to the selection of the organic materials and their arrangement in the optimal design of OLEDs.

Thermal Analysis of Organic Light Emitting Diodes Based on Basic Heat Transfer Theory

We investigate the thermal characteristics of standard organic light-emitting diodes （OLEDs） using a simple and clear 1D thermal model based on the basic heat transfer theory. The thermal model can accurately estimate the device temperature, which is linearly with electrical input power. The simulation results show that there is almost no temperature gradient within the OLED device working under steady state conditions. Furthermore, thermal analysis simulation results show that the surface properties （convective heat transfer coetficient and surface emissivity） of the substrate or cathode can significantly affect the temperature distribution of the OLED.

Efficiency of Blue Organic Light-emitting Diodes Enhanced by Employing an Exciton Feedback Layer

We report that a novel exciton feedback effect is observed by introducing the bis（2-methyl-8-quinolinolato）（4- phenylphenolato）Muminum （BAlq） inserted between the emitting layer （EML） and the electron transporting layer in blue organic light emitting diodes. As an exciton feedback layer （EFL）, the BAlq does not act as a traditional hole blocking effect. The design of this kind of device structure can greatly reduce excitons＇ quenching due to accumulated space charge at the exciton formation interface. Meanwhile, the non-radiative energy transfer from EFL to the EML can also be utilized to enhance the excitons＇ formation, which is confirmed by the test of photolumimescent transient lifetime decay and electroluminescence enhancement of these devices. Accordingly, the optimal device presents the improved performances with the maximum current efficiency of 4.2 cd/A and the luminance of 24600cd/m2, which are about 1.45 times and 1.75 times higher than those of device A （control device） without the EFL, respectively. Simultaneously, the device shows an excellent color stability with a tiny offset of the CIE coordinates （△x = ±0.003, △y = ±0.004） and a relatively lower efficiency roll-off of 26.2% under the driving voltage varying from 3 V to 10 V.

High Efficiency and Stable Organic Light-Emitting Diodes Based on Thermally Activated Delayed Fluorescence Emitter

High efficiency, stable organic light-emitting diodes （OLEDs） based on 2-pheyl-4＇-carbazole-9-H-Thioxanthen-9- one-10, 10-dioxide （TXO-PhCz） with different doping concentration are constructed. The stability of the encap- sulated devices are investigated in detail. The devices with the 10 wt% doped TXO-PhCz emitter layer （EML） show the best performance with a current efficiency of 52.1 cd/A, a power efficiency of 32.71re^W, and an external quantum efficiency （EQE） of 17.7%. The devices based on the lOwt%-doped TXO-PhCz EML show the best operational stability with a half-life time （LTSO） of 8Oh, which is 8 h longer than that of the reference devices based on fac-tris（2-phenylpyridinato）iridium（ Ⅲ） （Ir（ppy）a）. These indicate excellent stability of TXO-PhCz for redox and oxidation processes under electrical excitation and TXO-PhCz can be potentially used as the emitters for OLEDs with high efficiency and excellent stability. The high-performance device based on TXO-PhCz with high stability can be further improved by the optimization of the encapsulation technology and the development of a new host for TXO-PhCz.

A Mixed Host Emitting Interlayer Based on CBP:TPBi in Green Phosphorescent Organic Light-Emitting Diodes

A series of green phosphorescent organic light-emitting diodes based on bipolar-transporting material 4,4Lbis- （carbazol-9-yl） biphenyl （CBP） are prepared. We insert a mixed host emitting interlayer （CBPx： electron- transporting material 1,3,＆tris （N-phenylbenzimidazole-2yl） （TPBi）1-X） in the middle of the emitting layer, and the best performance appears when x is 2/3. The position of this interlayer can also affect the performanee of phosphorescent organic light-emitting diodes. When this interlayer is close to the side of the electron transporting layer, the maximum value of luminance, the current efficiency and the power efficiency are 34090cd/m2 at 12 V, 60. 6 cd/A and 56.6 lm/W, respectively.

Improved light extraction of organic light emitting diodes with a nanopillar pattering structure

We have investigated the properties of organic light emitting diodes （OLEDs） with a nanopillar patterning structure at organic-metal or organic-organic interfaces. The results demonstrate that the introduction of a nanopillar structure can improve the light extraction efficiency greatly. We also find that the number, height, and position of nanopillars all affect the light extraction of OLEDs. The maximum power efficiency of a device with an optimized nanopillar patterning mode can be improved to 2.47 times that of the reference device. This enhancement in light extraction originates from the improved injected carriers, the broadened charge recombination zone, and the intensified wave guiding effects.

Dependence of charge trapping of fluorescent and phosphorescent dopants in organic light-emitting diodes on the dye species and current density

This paper utilizes multilayer organic light-emitting diodes with a thin layer of dye molecules to study the mech- anism of charge trapping under different electric regimes. It demonstrates that the carrier trapping was independent of the current density in devices using fluorescent material as the emitting molecule while this process was exactly opposite when phosphorescent material was used. The triplet-triplet annihilation and dissociation of excitons into free charge carriers was considered to contribute to the decrease in phosphorescent emission under high electric fields. Moreover, the fluorescent dye molecule with a lower energy gap and ionized potential than the host emitter was observed to facilitate the carrier trapping mechanism, and it would produce photon emission.