A numerical model of multilayer organic light-emitting devices is presented in this article. This model is based on the drift-diffusion equations which include charge injection, transport, space charge effects, trappi...A numerical model of multilayer organic light-emitting devices is presented in this article. This model is based on the drift-diffusion equations which include charge injection, transport, space charge effects, trapping, heterojunction interface and recombination process. The device structure in the simulation is ITO/CuPc （20 nm）/NPD （40 nm）/Alq3 （60 nm）/LiF/Al. There are two heterojunctions which should be dealt with in the simulation. The I-V characteristics, carrier distribution and recombination rate of a device are calculated. The simulation results and measured data are in good agreement.展开更多
In this paper,a white organic light-emitting device(WOLEDs) with multiple-emissive-layer structure has been fabricated.The device has a simple structure of indium tin oxide(ITO)/NPB(20 nm)//DPVBi(20 nm)/CDBP:x Ir(btp)...In this paper,a white organic light-emitting device(WOLEDs) with multiple-emissive-layer structure has been fabricated.The device has a simple structure of indium tin oxide(ITO)/NPB(20 nm)//DPVBi(20 nm)/CDBP:x Ir(btp)2acac(10 nm)/Alq3(25 nm)/BCP(5 nm)/Cs F(1 nm)/Al(150 nm)(x= 0.15,2.5 and 3.0 wt%),where NPB and BCP are used as the hole-injecting layer,electron transporting and hole blocking layer,respectively.White light emission was realized in an OLED with 2.5% Ir(btp)2acac doping concentration.The device exhibits peak efficiency of 1.93 cd/A at 9 V and maximum brightness of 7005 cd/m^2 at 14 V.The Commission International de I'Eclairage(CIE)(1931) coordinates of white emission are well within the white zone,which moves from(0.35,0.33) to(0.26,0.30) when the applied voltage is varied from 5 V to 14 V.展开更多
Light extraction efficiency of organic light-emitting devices has improved by using a nano-sized multi-cathode structure consisting of semi-transparent metal and an optical compensation layer. From the detail optical ...Light extraction efficiency of organic light-emitting devices has improved by using a nano-sized multi-cathode structure consisting of semi-transparent metal and an optical compensation layer. From the detail optical calculation based on the multi-scale analysis including near-field optics, it was found that surface plasmon loss in the metal cathode is suppressed to less than 10% due to long range and short range surface plasmon coupling between both sides of metal cathode. Not less than 90% of optical power in the dipole emission can be successfully utilized as propagation light. Light extraction efficiency in a phosphorescent device has improved about twice by using the multi-cathode structure.展开更多
基金Project supported by Zhejiang Yangguang Cooperation Foundation, China (Grant No W050317)
文摘A numerical model of multilayer organic light-emitting devices is presented in this article. This model is based on the drift-diffusion equations which include charge injection, transport, space charge effects, trapping, heterojunction interface and recombination process. The device structure in the simulation is ITO/CuPc （20 nm）/NPD （40 nm）/Alq3 （60 nm）/LiF/Al. There are two heterojunctions which should be dealt with in the simulation. The I-V characteristics, carrier distribution and recombination rate of a device are calculated. The simulation results and measured data are in good agreement.
文摘In this paper,a white organic light-emitting device(WOLEDs) with multiple-emissive-layer structure has been fabricated.The device has a simple structure of indium tin oxide(ITO)/NPB(20 nm)//DPVBi(20 nm)/CDBP:x Ir(btp)2acac(10 nm)/Alq3(25 nm)/BCP(5 nm)/Cs F(1 nm)/Al(150 nm)(x= 0.15,2.5 and 3.0 wt%),where NPB and BCP are used as the hole-injecting layer,electron transporting and hole blocking layer,respectively.White light emission was realized in an OLED with 2.5% Ir(btp)2acac doping concentration.The device exhibits peak efficiency of 1.93 cd/A at 9 V and maximum brightness of 7005 cd/m^2 at 14 V.The Commission International de I'Eclairage(CIE)(1931) coordinates of white emission are well within the white zone,which moves from(0.35,0.33) to(0.26,0.30) when the applied voltage is varied from 5 V to 14 V.
文摘Light extraction efficiency of organic light-emitting devices has improved by using a nano-sized multi-cathode structure consisting of semi-transparent metal and an optical compensation layer. From the detail optical calculation based on the multi-scale analysis including near-field optics, it was found that surface plasmon loss in the metal cathode is suppressed to less than 10% due to long range and short range surface plasmon coupling between both sides of metal cathode. Not less than 90% of optical power in the dipole emission can be successfully utilized as propagation light. Light extraction efficiency in a phosphorescent device has improved about twice by using the multi-cathode structure.
