Effective technology for processing industrial volatile organic compounds by the atmospheric pressure microwave plasma torch

In this study,we investigated the abatement of volatile organic compounds(VOCs)by the atmospheric pressure microwave plasma torch(AMPT).To study the treatment efficiency of AMPT,we used the toluene and water-based varnish to simulate VOCs,respectively.By measuring the compounds and contents of the mixture gas before/after the microwave plasma process,we have calculated the treatment efficiency of AMPT.The experimental results show that the treatment efficiency of AMPT for toluene with a concentration of 17.32×10^(4) ppm is up to 60 g/kWh with the removal rate of 86%.For the volatile compounds of water-based varnish,the removal efficiency is up to 97.99%.We have demonstrated the higher potential for VOCs removal of the AMPT process.

Structures and magnetic properties of nanocomposite CoFe_2O_4-BaTiO_3 fibers by organic gel-thermal decomposition process

The nanocomposite xCoFe2O4-(1-x)BaTiO3(x=0.2,0.3,0.4,0.5,molar fraction) fibers with fine diameters and high aspect ratios(length to diameter ratios) were prepared by the organic gel-thermal decomposition process from citric acid and metal salts.The structures and morphologies of gel precursors and fibers derived from thermal decomposition of the gel precursors were characterized by Fourier transform infrared spectroscopy,X-ray diffractometry and scanning electron microscopy.The magnetic properties of the nanocomposite fibers were measured by vibrating sample magnetometer.The nanocomposite fibers consisting of ferrite(CoFe2O4) and perovskite(BaTiO3) are formed at the calcination temperature of 900 ℃ for 2 h.The average grain sizes of CoFe2O4 and BaTiO3 in the nanocomposite fibers increase from 25 to 65 nm with the calcination temperature from 900 to 1 180 ℃.The single fiber constructed from these nanograins of CoFe2O4 and BaTiO3 has a necklace-like morphology.The saturation magnetization of the nanocomposite 0.4CoFe2O4-0.6BaTiO3 fibers increases with the increase of CoFe2O4 grain size,while the coercivity reaches a maximum value when the average grain size of CoFe2O4 is around the critical single-domain size of 45 nm obtained at 1 000 ℃.The saturation magnetization and remanence of the nanocomposite xCoFe2O4-(1-x)BaTiO3(x=0.2,0.3,0.4,0.5) fibers almost exhibit a linear relationship with the molar fraction of CoFe2O4 in the nanocomposites.

Mutagenicity and Genotoxicity of Organic Extracts from Finished Water with Different Treatment Process

Purification of surface water is widely practiced with conventional water treatment processes like coagulation-flocculation, sedimentation, filtration,and disinfection. Some reports have specified that conventional wastewater purification processes do not effectively remove many chemical contaminants,

Work Organization at Farm Level： A Process-Led Approach to Understand Land Use Changes

In the French Alps, some grasslands have been abandoned, others are invaded by scrub whereas they are still used by farmers What are the relationships between land use changes and other changes at farm level that lead to scrub invasion？ We hypothesize that they are linked by two work organization processes： process of changes （changes in the household and farm） leading to less intensive land use; and annual processes （sequences of activities during the year） and their repetition from one year to another, leading to insufficient land maintenance. In this paper, we present a study carried out in the Northern French Alps, based on surveys with livestock farmers. It appears that land use changes are often the consequence of other changes made to address work problems, and land use sequences are defined according to workforce and prioritization of tasks. This highlights the importance of considering farmers as workers in order to evaluate land use changes at the farm level and to link them to the human dimension within farming systems.

Design of control adaptability system model for TV media organization structure

To resolve the control adaptability problem of TV media in complex competitive environment, a control system model of TV media organization structure was designed. Based on the designed system model for TV media organization structure, the relations among the main factors of the system constitution, missions, organizing decision entity, and carrying bodies were analyzed. By means of applying multi-objective decision method and complex control system theory, and combining the integration model of TV media organization structure, the basic model was concluded and the corresponding parameters were designed. The current organization process of TV media is analyzed by this model, which comes to the adaptability appearance with different parameters. The results indicate that the model can estimate current TV media organization structure for the chain appearance of communications and the correlation between platforms and policy-making agencies.

Interfacial engineering of printable bottom back metal electrodes for full-solution processed flexible organic solar cells

Printing of metal bottom back electrodes of flexible organic solar cells（FOSCs） at low temperature is of great significance to realize the full-solution fabrication technology. However, this has been difficult to achieve because often the interfacial properties of those printed electrodes, including conductivity, roughness, work function,optical and mechanical flexibility, cannot meet the device requirement at the same time. In this work, we fabricate printed Ag and Cu bottom back cathodes by a low-temperature solution technique named polymer-assisted metal deposition（PAMD） on flexible PET substrates. Branched polyethylenimine（PEI） and ZnO thin films are used as the interface modification layers（IMLs） of these cathodes. Detailed experimental studies on the electrical, mechanical, and morphological properties, and simulation study on the optical properties of these IMLs are carried out to understand and optimize the interface of printed cathodes. We demonstrate that the highest power conversion efficiency over 3.0% can be achieved from a full-solution processed OFSC with the device structure being PAMDAg/PEI/P3 HT：PC61BM/PH1000. This device also acquires remarkable stability upon repeating bending tests.

Research on Application of BIM Technology in Project Management

According to the actual requirement of project management on BIM application, the paper presents a new the overall implementation scheme and system architecture based on BIM project management. This paper established the engineering project management process that suitable for the situation of our country, design the organizational structure and verified the rationality through the example simulation based on the study of ideological characteristics of BIM combined with the modem project management theory and method. The research results has a certain theory reference value in our implementation and project management to improve the level of BIM information integration.

Research on Model of Virtual Organization and Its Practice

This paper discusses an organizational model to be used for both conventional and virtual organizations. The model deals with variable relationships within an organization and provides a framework for overall organizational design that may include relationship among different design variables and external relationship with environment. Based on the researches of virtual organization, this paper also illustrates the new model of organization in the real world such as Beijing 2008 Olympic games and Dongfeng Automobile group.

Source dynamics of carbonaceous aerosol during the haze bloom-decay process in China based on radiocarbon and organic molecular tracer

With the support by the National Natural Science Foundation of China and the Chinese Academy of Sciences,the research team led by Prof.Li Jun(李军)at the State Key Laboratory of Organic Geochemistry,Guangzhou Institute of Geochemistry,Chinese Academy of Sciences,illustrated the source dynamics of carbonaceous aerosol during the haze bloom-decay process in Beijing and Guangzhou based on

4D Design and Simulation Technologies and Process Design Patterns to Support Lean Construction Methods

The objective of this ongoing joint research program is to determine how 3D/4D modeling, simulation and visualization of Products (buildings), Organizations and Processes (POP) can support lean construction. Initial findings suggest that Process Design Pattern may have the potential to intuitively support ICT based lean construction. We initiated a 'Process Archeology' in order to reveal the requirements for tools that can support the planning, simulation and control of lean construction methods. First findings show that existing tools provide only limited support and therefore, we started to develop new methodologies and technologies to overcome these shortcomings. Through the introduction of Process Design Patterns, we intent to establish process thinking in the interdisciplinary POP design. Optimized construction processes may be synthesized with semi-automatic methods by applying Process Design Patterns on building structures. By providing process templates that integrate problem solution and expert knowledge, Process Design Patterns may have the potential to ensure high quality process models.

Selective elimination of chromophoric and fluorescent dissolved organic matter in a full-scale municipal wastewater treatment plant

Effluent organic matter（Ef OM） from municipal wastewater treatment plants potentially has a detrimental effect on both aquatic organisms and humans.This study evaluated the removal and transformation of chromophoric dissolved organic matter（CDOM） and fluorescent dissolved organic matter（FDOM） in a full-scale wastewater treatment plant under different seasons.The results showed that bio-treatment was found to be more efficient in removing bulk DOM（in term of dissolved organic carbon,DOC） than CDOM and FDOM,which was contrary to the disinfection process.CDOM and FDOM were selectively removed at various stages during the treatment.Typically,the low molecular weight fractions of CDOM and protein-like FDOM were more efficiently removed during bio-treatment process,whereas the humic-like FDOM exhibited comparable decreases in both bio-treatment and disinfection processes.Overall,the performance of the WWTP was weak in terms of CDOM and FDOM removal,resulting in enrichment of CDOM and FDOM in effluent.Moreover,the total removal of the bulk DOM（P 〈 0.05） and the protein-like FDOM（P 〈 0.05） displayed a significant seasonal variation,with higher removal efficiencies in summer,whereas removal of CDOM and the humic-like FDOM showed little differences between summer and winter.In all,the results provide useful information for understanding the fate and transformation of DOM,illustrating that sub-fractions of DOM could be selectively removed depending on treatment processes and seasonality.

Bioavailability of wastewater derived dissolved organic nitrogen to green microalgae Selenastrum capricornutum,Chlamydomonas reinhardtii,and Chlorella vulgaris with/without presence of bacteria

Effluent dissolved organic nitrogen（DON） is problematic in nutrient sensitive surface waters and needs to be reduced to meet demanding total dissolved nitrogen discharge limits.Bioavailable DON（ABDON） is a portion of DON utilized by algae or algae ＋ bacteria,while biodegradable DON（BDON） is a portion of DON decomposable by bacteria.ABDON and BDON in a two-stage trickling filter（TF） wastewater treatment plant was evaluated using three different microalgal species,Selenastrum capricornutum,Chlamydomonas reinhardtii and Chlorella vulgaris and mixed cultured bacteria.Results showed that up to80% of DON was bioavailable to algae or algae ＋ bacteria inoculum while up to 60% of DON was biodegradable in all the samples.Results showed that C.reinhardtii and C.vulgaris can be used as a test species the same as S.capricornutum since there were no significant differences among these three algae species based on their ability to remove nitrogen species.