In Situ Formed Tribofilms as Efficient Organic/Inorganic Hybrid Interlayers for Stabilizing Lithium Metal Anodes

The practical application of Li metal anodes(LMAs)is limited by uncontrolled dendrite growth and side reactions.Herein,we propose a new friction-induced strategy to produce high-performance thin Li anode(Li@CFO).By virtue of the in situ friction reaction between fluoropolymer grease and Li strips during rolling,a robust organic/inorganic hybrid interlayer(lithiophilic LiF/LiC_(6)framework hybridized-CF_(2)-O-CF_(2)-chains)was formed atop Li metal.The derived interface contributes to reversible Li plating/stripping behaviors by mitigating side reactions and decreasing the solvation degree at the interface.The Li@CFO||Li@CFO symmetrical cell exhibits a remarkable lifespan for 5,600 h(1.0 mA cm^(-2)and 1.0 mAh cm^(-2))and 1,350 cycles even at a harsh condition(18.0 mA cm^(-2)and 3.0 mAh cm^(-2)).When paired with high-loading LiFePO4 cathodes,the full cell lasts over 450 cycles at 1C with a high-capacity retention of 99.9%.This work provides a new friction-induced strategy for producing high-performance thin LMAs.

An Explosive Organic/Inorganic Hybrid: Synthesis and Thermal Property of Octa(2,4-dinitrophenyl)silsesquioxane

Octaphenylsilsesquioxane(OPhS) was prepared by a modifying method and a new core-shell nanocomposite, octa(2,4-dinitrophenyl)silsesquioxane, [(R_2PhSiO_ 1.5)_8, R=—NO_2, ODNPhS], was synthesized by nitration of OPhS in a mixed acid solution of nitric and sulfuric acids at about 60 ℃. Their molecular structures were determined by DRIFTS, 1H NMR, 13C NMR spectra analysis. The thermal analysis shows that ODNPhS is an explosive that detonates at about 420 ℃.

Preparation and Conducting Behavior of Amphibious Organic/Inorganic Hybrid Proton Exchange Membranes Based on Benzyltetrazole

A series of novel amphibious organic/inorganic hybrid proton exchange membranes with H3PO4 doped which could be used under both wet and dry conditions was prepared through a sol-gel process based on acrylated triethoxysilane（A-TES） and benzyltetrazole-modified triethoxysilane（BT-TES）.The dual-curing approach including UV-curing and thermal curing was used to obtain the crosslinked membranes.Polyethylene glycol（400） diacrylate（PEGDA） was used as an oligomer to form the polymeric matrix.The molecular structures of precursors were characterized by 1 H,13 C and 29 Si NMR spectra.The thermogravimetric analysis（TGA） results show that the membranes exhibit acceptable thermal stability for their application at above 200 oC.The differential scanning calorimeter（DSC） determination indicates that the crosslinked membranes with the mass ratios of below 1.6 of BT-TES to A-TES and the same mass of H3PO4 doped as that of A-TES possess the-T g s,and the lowest T g（-28.9 ℃） exists for the membrane with double mass of H3PO4 doped as well.The high proton conductivity in a range of 9.4―17.3 mS/cm with the corresponding water uptake of 19.1%―32.8% of the membranes was detected at 90 oC under wet conditions.Meanwhile,the proton conductivity in a dry environment for the membrane with a mass ratio of 2.4 of BT-TES to A-TES and double H3PO4 loading increases from 4.89×10-2 mS/cm at 30 ℃ to 25.7 mS/cm at 140 ℃.The excellent proton transport ability under both hydrous and anhydrous conditions demonstrates a potential application in the polymer electrolyte membrane fuel cells.

A New Method to Study the Sol-gel Transition Process of Organic/Inorganic Hybrid Materials

The sol-gel transition process of PMMA/SiO2 hybrid materials was first studied by means of the dynamic torsional vibration method. The different stages of the transition can be described by the change of torque. The temperature-dependent measurement of the gel time（ tg ） gives the possibility to determine the apparent activation energy.（ Ea ） of this transition according to Flory＇s gelation theory. The non-equilibrium thermodynamic fluctuation theory was used to predict the transition behavior. The isothermal transition experiments on hybrid sols with different TEOS（tetraethyl orthosilicate） contents were carried out. The results show that the Ea of a hybrid sol is higher than that of a non- hybrid sol of a TEOS-water-ethanol system. The increasing of TEOS content in a hybrid sol has no obvious effect on the Ea value, but it can enhance the sol-gel .reaction rate.

SYNTHESIS AND CHARACTERIZATION OF NOVEL SOL-GEL DOPED ORGANIC/INORGANIC HYBRID NONLINEAR OPTICAL MATERIALS

hydroxy-4-nitro azobenzene (NHA) and 4-amino-4-nitro azobenzene (DO3) were prepared respectively from p-nitrophenylamine as a precursor compound. Two kinds of doped organic/inorganic hybrid nonlinear optical (NLO) materials containing NHA and DO3 were synthesized by Sol-Gel process. The preparation and properties of two NLO materials were studied and characterized by FTIR, 1H-NMR, UV-VIS, SEM, DSC and SHG measurements. The results show that the maximum doping amounts of NHA and DO3 in two doped hybrid NLO materials are 7.2(wt)% and 11.3(wt)% respectively, and the corresponding second-order NLO coefficients (d33 values) are 2.91×10 8esu and 6.14×10 8esu. Two doped NLO materials have relatively good RT stability, after 90 days at RT the d33 values can maintain about 85% of their initial values, but after 10h at 100℃ can only maintain about 50% of their initial values. In this report, the reasons for high-temperature instability of doped materials were discussed, and the possible improvements were also suggested.

Electrochemical CO_(2) reduction catalyzed by organic/inorganic hybrids

Electroreduction of CO_(2) into value-added chemicals and fuels utilizing renewable electricity offers a sustainable way to meet the carbon-neutral goal and a viable solution for the storage of intermittent green energy sources.At the core of this technology is the development of electrocatalysts to accelerate the redox kinetics of CO_(2) reduction reactions(CO_(2)RR)toward high targeted-product yield at minimal energy input.This perspective focuses on a unique category of CO_(2)RR electrocatalysts embodying both inorganic and organic components to synergistically promote the reaction activity,selectivity and stability.First,we summarize recent progress on the design and fabrication of organic/inorganic hybrids CO_(2)RR electrocatalysts,with special attention to the assembly protocols and structural configurations.We then carry out a comprehensive discussion on the mechanistic understanding of CO_(2)RR processes tackled jointly by the inorganic and organic phases,with respect to the regulation of mass and charge transport,modification of double-layer configuration,tailoring of intermediates adsorption,and establishment of tandem pathways.At the end,we outline future challenges in the rational design of organic/inorganic hybrids for CO_(2)RR and further extend the scope to the device level.We hope this work could incentivize more research interests to construct organic/inorganic hybrids for mobilizing electrocatalytic CO_(2)RR towards industrialization.

Thixotropic composite hydrogels based on agarose and inorganic hybrid gellants

Water can be used as oxidant in conjunction with metal particles to form metal-water propellant to increase the energy of propellant.For this application,water needs to be stored in form of solid and capable of becoming liquid when use.Stable and thixotropic hydrogel has good potential as water-retaining material and oxidant of metal-based propellant.In this study,we prepared organic/inorganic composite hydrogels by combining inorganic gellants hectorite and fumed silica with organic gellant agarose,respectively.The total content of the gellants can be reduced to less than 2%by adding agarose.The influence of agarose on water content,phase transition temperature,centrifugal stability and other basic physical properties of composite hydrogels were discussed.The results show that the composite hydrogels have better thixotropy and stability than pure inorganic hydrogels,and the gel-sol transformation can be realized by applying shear force or heating to the phase transition temperature.The composite hydrogels have good shear thinning ability and improved mechanical stability.Fumed silica/agarose hydrogels have better physical stability,while the thixotropy and shear thinning ability of hectorite/agarose hydrogels are better.

Effect of Bio-Based Organic‒Inorganic Hybrid Hydrogels on Fire Prevention of Spontaneous Combustion of Coals

To solve the fire accidents caused by coal combustion,this work prepared four hybrid hydrogel materials using bio-based polymers,flame retardants,and inorganic materials.Compared to pure water and 3.5 wt%MgCl_(2)solution,the as-prepared hydrogel presents good fire prevention performance.In addition,it is found that CO and CO_(2)are not produced by coal when the pyrolysis temperature is lower than 200℃.During low-temperature pyrolysis,CO is more likely to be produced than CO_(2),indicating inadequate pyrolysis behavior.At the same time,the addition of fire-preventing hydrogel can not only decrease the maximum CO_(2)concentration before the critical temperature but also prolong the corresponding time.In addition,based on the cone calorimeter test,the inhibition effects of pure water,magnesium chloride solution,and four hybrid hydrogels on heat release behavior are evaluated.It is demonstrated that different dosages of different hydrogels affected the fire prevention effect.Phosphorous-modified cellulose/silica and carrageenan/DMMP/vermiculite composite hydrogels have the weakest fire prevention effect at 20 g,which is weaker than that of water.However,the fire prevention effect of carrageenan/DMMP/vermiculite composite hydrogels exceeded that of water at 40 and 60 g.Additionally,the fire prevention effect of the sodium alginate/sepiolite/ammonium polyphosphate composite hydrogel is most significant in common tests,attributed to the intumescent flame retardant system.

Recent progress of hybrid cathode interface layer for organic solar cells

Organic solar cells(OSCs)have gained conspicuous progress during the past few decades due to the development of materials and upgrading of the device structure.The power conversion efficiency(PCE)of the single-junction device had surpassed 19%.The cathode interface layer(CIL),by optimizing the connection between the active layer and the cathode electrode,has become a momentous part to strengthen the performances of the OSCs.Simultaneously,CIL is also indispensable to illustrating the working mechanism of OSCs and enhancing the stability of the OSCs.In this essay,hybrid CILs in OSCs have been summarized.Firstly,the advancement and operating mechanism of OSCs,and the effects and relevant design rules of CIL are briefly concluded;secondly,the significant influence of CIL on enhancing the stability and PCE of OSCs is presented;thirdly,the characteristics of organic hybrid CIL and organic-inorganic hybrid CIL are introduced.Finally,the conclusion and outlook of CIL are summarized.

4‑Terminal Inorganic Perovskite/Organic Tandem Solar Cells Offer 22%Efficiency

After fast developing of single-junction perovskite solar cells and organic solar cells in the past 10 years,it is becoming harder and harder to improve their power conversion efficiencies.Tandem solar cells are receiving more and more attention because they have much higher theoretical efficiency than single-junction solar cells.Good device performance has been achieved for perovskite/silicon and perovskite/perovskite tandem solar cells,including 2-terminal and 4-terminal structures.However,very few studies have been done about 4-terminal inorganic perovskite/organic tandem solar cells.In this work,semi-transparent inorganic perovskite solar cells and organic solar cells are used to fabricate 4-terminal inorganic perovskite/organic tandem solar cells,achieving a power conversion efficiency of 21.25%for the tandem cells with spin-coated perovskite layer.By using drop-coating instead of spin-coating to make the inorganic perovskite films,4-terminal tandem cells with an efficiency of 22.34%are made.The efficiency is higher than the reported 2-terminal and 4-terminal inorganic perovskite/organic tandem solar cells.In addition,equivalent 2-terminal tandem solar cells were fabricated by connecting the sub-cells in series.The stability of organic solar cells under continuous illumination is improved by using semi-transparent perovskite solar cells as filter.

Synergistic Optimization of Buried Interface by Multifunctional Organic-Inorganic Complexes for Highly Efficient Planar Perovskite Solar Cells

For the further improvement of the power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs),the buried interface between the perovskite and the electron transport layer is crucial.However,it is challenging to effectively optimize this interface as it is buried beneath the perovskite film.Herein,we have designed and synthesized a series of multifunctional organic-inorganic(OI)complexes as buried interfacial material to promote electron extraction,as well as the crystal growth of the perovskite.The OI complex with BF4−group not only eliminates oxygen vacancies on the SnO_(2) surface but also balances energy level alignment between SnO_(2) and perovskite,providing a favorable environment for charge carrier extraction.Moreover,OI complex with amine(−NH_(2))functional group can regulate the crystallization of the perovskite film via interaction with PbI2,resulting in highly crystallized perovskite film with large grains and low defect density.Consequently,with rational molecular design,the PSCs with optimal OI complex buried interface layer which contains both BF4−and−NH_(2) functional groups yield a champion device efficiency of 23.69%.More importantly,the resulting unencapsulated device performs excellent ambient stability,maintaining over 90%of its initial efficiency after 2000 h storage,and excellent light stability of 91.5%remaining PCE in the maximum power point tracking measurement(under continuous 100 mW cm−2 light illumination in N2 atmosphere)after 500 h.

Optical Waveguides from Organic/Inorganic Hybrid Materials

Organic/inorganic material has attracted great attentions because its importance as photonic materials. We report on our recent results on organic/inorganic hybrid sol-gel materials and optical waveguides like splitter, thermo-optic switch and micro-cavity laser.

Synthesis and Characterization of Poly(St-co-BA) Latex with an Organic-Inorganic Hybrid Compound as Emulsifier

A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size analyzer, transmission electron microscope (TEM), optical contact angle measurement (OCA) and dynamic mechanical analyzer (DMA). It was found that the protective agent, sodium polyacrylate (PA),could obviously improve the polymerization stability and the functional monomer, glycidyl methacrylate (GMA), could enhance the store stability of the latex. The particle size of poly(St-co-BA) latex decreased and then leveled off as OIHC content increased. TEM shows that the prepared polymers were a~:tually organic-inorganic nanocomposites, and these films have better waterproof property than those prepared by traditional poly(St-co-BA) latex or organic silicone modified poly(St-co-BA) latex. The nanocomposite polymer has much higher glass transition temperature than organic silicone modified poly(St-co-BA) polymer containing the same organic silicone content.

Combined Effect of Organic Manures and Inorganic Fertilizers on the Growth and Yield of Hybrid Rice (Palethwe-1)

We investigated the effect of combining organic and inorganic fertilizers on the growth and yield of hybrid rice (Palethwe-1) in the dry and wet seasons of 2015. Four quantities of inorganic fertilizer were used in the main plot [0%, 50%, 75%, and 100% nitrogen, phosphorus, and potassium (NPK)] based on the recommended amounts of 150 kg N ha-1, 70 kg P2O5 ha-1, and 120 kg K2O ha-1, while different organic manures were applied to subplots [no organic manure (O0), cow manure (Oc), poultry manure (Op), and vermicompost (Ov);all at 5 t·ha-1] as part of a split-plot experimental design with three replicates. In both seasons, significant differences in growth parameters including number of tillers hill-1, soil-plant analysis development (SPAD) values, total dry matter, yield, and yield components were observed in plants supplied with different inorganic fertilizers. The 100% NPK (I100) fertilizer produced the maximum yield but similar yields were achieved in plots supplied with 50% NPK (I50) and 75% NPK (I75). Significant differences in growth and yield parameters were also found in crops supplied with organic manures. Although identical quantities were supplied, Op produced the best growth parameters in both seasons including total dry matter, yield, and yield components. Oc also performed well. Combining inorganic and organic fertilizers demonstrated that I50 together with Op (5 t·ha-1) provided similar growth, total dry matter, and yield parameters to I100 in both seasons. Oc (5 t·ha-1) plus I75 also achieved similar yields to I100. This study demonstrates that the combined application of inorganic fertilizers and organic manures has the potential to reduce chemical fertilizer usage without decreasing the yield of hybrid rice, and can enhance the growth, yield, and yield components of Palethwe-1.

Syntheses and Characterizations of Two New Organic-inorganic Hybrids Based on Heteropolymolybdates and Piperidine Molecules

Two new organic-inorganic compounds [（CH2）5NH2]3[PMo12O40]·3[（CH2）NH] 1 and [（CH2）5NH2]6[P2Mo18O62]·5H2O 2 have been synthesized using conventional and hydrothermal methods, respectively, and characterized by elemental analyses, IR, TG and single-crystal X-ray diffraction. X-ray analyses show that in these compounds heteropolymolybdates [PMo12O40]^3- and [P2Mo18O62]^6- are reserved their Keggin or Dawson structures and linked to piperidine through electrostatic and hydrogen-bonding interactions.

A New Bismuth(Ⅲ) Iodide Inorganic/organic Hybrid Solid Containing Large Heterocyclic Conjugated Organic Ligand: Synthesis, Properties and Calculations

A new bismuth（III） iodide inorganic/organic hybrid containing larger heterocyclic conjugated organic ligand, [（dppz）2Bi2I6]·2DMF （1） （dppz = dipyrido[3,2-a：2＇,3＇-c]phenazine）, has been synthesized by solution process and structurally determined by X-ray diffraction method. 1 crystallizes in triclinic, space group Pī with Mr= 1844.08, α = 9.215（5）, b = 11.488（6）, c = 12.424（9） ？, α = 106.66（2）, β = 90.84（2）, γ = 92.34（2）°, V = 1258.5（13） ？3, Z = 1, Dc = 2.433 g/cm3, F（000） = 830, μ（MoKα） = 10.702 mm–1, the final R = 0.0834 and wR = 0.1947 for 2749 observed reflections with I 〉 2σ（I）. 1 consists of a dimeric structure [（dppz）2Bi2I6], in which two [（dppz）BiI3] fragments are bridged by a pair of iodine atoms. Hydrogen bonds and π···π stacking interactions contribute to the structural extension and stabilization. Experimental band gap of about 2.13 eV indicates its semiconductor nature. The optical absorption spectrum and electronic structure were also discussed.

ORGANIC/INORGANIC HYBRID EPOXY NANOCOMPOSITES BASED ON OCTA(AMINOPHENYL)SILSESQUIOXANE

Octa（aminophenyl）silsesquioxane （OAPS） was used as the curing agent of diglycidyl ether of bisphenol-A （DGEBA） epoxy resin. A study on comparison of DGEBA/OAPS with DGEBA/4,4＇-diaminodiphenyl sulfone （DDS） epoxy resins was achieved. Differential scanning calorimetry was used to investigate the curing reaction and its kinetics, and the glass transition of DGEBA/OAPS. Thermogravimetric analysis was used to investigate thermal decomposition of the two kinds of epoxy resins. The reactions between amino groups and epoxy groups were investigated using Fourier transform infrared spectroscopy. Scanning electron microscopy was used to observe morphology of the two epoxy resins. The results indicated that OAPS had very good compatibility with DGEBA in molecular level, and could form a transparent DGEBA/OAPS resin. The curing reaction of the DGEBA/OAPS prepolymer could occur under low temperatures compared with DGEBA/DDS. The DGEBA/OAPS resin didn＇t exhibit glass transition, but the DGEBA/DDS did, which meant that the large cage structure of OAPS limited the motion of chains between the cross-linking points. Measurements of the contact angle indicated that the DGEBA/OAPS showed larger angles with water than the DGEBA/DDS resin. Thermogravimetric analysis indicated that the incorporation of OAPS into epoxy system resulted in low mass loss rate and high char yield, but its initial decomposition temperature seemed to be lowered.

Preparation of polythiophene/WO_3 organic-inorganic hybrids and their gas sensing properties for NO_2 detection at low temperature

Polythiophene/WO3（PTP/WO3）organic-inorganic hybrids were synthesized by an in situ chemical oxidative polymerization method,and char- acterized by X-ray diffraction（XRD）,transmission electron microscopy（TEM）and thermo-gravimetric analysis（TGA）.The Polythiophene/ WO3 hybrids have higher thermal stability than pure polythiophene,which is beneficial to potential application as chemical sensors.Gas sensing measurements demonstrate that the gas sensor based on the Polythiophene/WO3 hybrids has high response and good selectivity for de- tecting NO2 of ppm level at low temperature.Both the operating temperature and PTP contents have an influence on the response of PTP/WO3 hybrids to NO2.The 10 wt%PTP/WO3 hybrid showed the highest response at low operating temperature of 70-C.It is expected that the PTP/WO3 hybrids can be potentially used as gas sensor material for detecting the low concentration of NO2 at low temperature.

An ionic 2D inorganic-organic hybrid of tris[((1H-tetrazol-5-yl)methyl)morpholine] dodecatungstophosphate(Ⅴ) pentahydrate:Synthesis X-ray crystal structure and spectroscopic characterizations

A unique ionic hybrid material[C_6H_(12)N_5O]_3[(PO_4)W__(12)O_(36)]·5H_2O has been synthesized from the reaction of((1H-tetrazole-5- yl)methyl)morpholine andα-H_3[(PO_4)W_(12)O_(36)]·21H_2O.It has successfully been characterized by elemental analysis,IR and ~1H NMR spectroscopies,TGA and single-crystal X-ray diffraction method.The title compound is constructed from the three [C_6H_(12)N_5O]^+ cations andα-Keggin[(PO_4)W_(12)O_(36)]^(3-) polyoxoanion.The most remarkable structural feature of this hybrid can...

Flame Retardancy Enhancement of Hybrid Composite Material by Using Inorganic Retardants

This study aims to investigate the possibility of improving the flame Retardancy for the hybrid composite material consisting araldite resin (CY223). The hybrid composite was reinforced by hybrid fibers from carbon and Kevlar fibers on woven roving form (45o -0o), by using a surface layer of 4mm thick of Zinc Borate flame retardant. Afterward, the structure was exposed directly to gas flame of 2000oC due to 10 mm and 20mm exposure interval. The retardant layer thermal resistance and protection capability were determined. The study was continued to improve the performance of Zinc Borate layer mixed by 10%, 20% and 30% of Antimony Trioxide. To determine the heat transfer of the composite material the opposite surface temperature method was used. Zinc Borate with (30%) Antimony Trioxide gives the optimized result of the experiment.