Organic-Inorganic Interaction Recorded by Polycyclic Aromatic Steranes in Continental Epithermal Ore Deposits

Continental epithermal ore deposits are commonly associated with sedimentary organic matter,oils or solid bitumen.These organics embedded in mineral deposits can convey valuable information of the ore genesis.However,the extent to which the formation of ore minerals was recorded by organic compounds remains largely unknown,as also is how metal-rich ores interfere with the molecular proxies in the temperature regime envisaged for hydrothermal activity.The molecular compositional changes of various polycyclic aromatic steranes and polycyclic aromatic hydrocarbons and compounds derived from the Jinding Pb/Zn deposit,SW China provide new data.Aliphatic regular steranes are present as traces.The transformation from polycyclic aromatic steranes to unsubstituted polycyclic aromatic hydrocarbons is observed to show an increased trend with increasing hydrothermal alteration levels;this is consistent with the transformation from unsubstituted polycyclic aromatic hydrocarbons to heterocyclic compounds.Dehydrocyclization(aromatization)of polycyclic biological compounds and hydrodecyclization(dearomatization)of polycyclic aromatic compounds are two important reaction pathways in hydrothermal systems with moderate temperature.This detailed investigation of organicinorganic interactions of two groups of polycyclic compounds with metal-rich ores provides insights into the questions on how and to what extent the formation of Pb/Zn deposits can be recorded by organics.This work will improve our understanding of carbon reduction,oxidation or condensation in the deep Earth and the carbon exchange between the Earth's crust and mantle,and may shed light on the processes for ultra-deep hydrocarbon exploration.

Organic-inorganic halide perovskites for memristors

Organic-inorganic halides perovskites(OHPs)have drawn the attention of many researchers owing to their astonishing and unique optoelectronic properties.They have been extensively used for photovoltaic applications,achieving higher than 26%power conversion efficiency to date.These materials have potential to be deployed for many other applications beyond photovoltaics like photodetectors,sensors,light-emitting diodes(LEDs),and resistors.To address the looming challenge of Moore’s law and the Von Neumann bottleneck,many new technologies regarding the computation of architectures and storage of information are being extensively researched.Since the discovery of the memristor as a fourth component of the circuit,many materials are explored for memristive applications.Lately,researchers have advanced the exploration of OHPs for memristive applications.These materials possess promising memristive properties and various kinds of halide perovskites have been used for different applications that are not only limited to data storage but expand towards artificial synapses,and neuromorphic computing.Herein we summarize the recent advancements of OHPs for memristive applications,their unique electronic properties,fabrication of materials,and current progress in this field with some future perspectives and outlooks.

Fabrication of branch-like Aph@LDH-MgO material through organic-inorganic hybrid conjugation for excellent anti-corrosion performance

Layered double hydroxides(LDH)frameworks have shown significant enhancement in stability and reusability,and their tailorable architecture brings new insight into the development of the next generation of hybrid materials,which attracted considerable attention in many fields over the years.One of the factors contributing to the widespread applicability of layered double hydroxides is their adaptable composition,which can accommodate a wide spectrum of potential anionic guests.This exceptional property makes the LDH system simple to adjust for various applications.However,most LDH systems are synthesized in situ in an autoclave at high temperatures and pressures that severely restrict the industrial use of such coating systems.In this study,LDH was directly synthesized on a magnesium alloy that had undergone plasma electrolytic oxidation(PEO)treatment in the presence of ethylenediaminetetraacetic acid,thereby avoiding the use of hydrothermal autoclave conditions.This LDH system was compared with a hybrid architecture consisting of organic-inorganic self-assembly.An organic layer was fabricated on top of the LDH film using 4-Aminophenol(Aph)compound,resulting in a smart hierarchical structure that can provide a robust Aph@LDH film with excellent anti-corrosion performance.At the molecular level,the conjugation characteristics and adsorption mechanism of Aph molecule were studied using two levels of theory as follows.First,Localized orbit locator(LOL)-πisosurface,electrostatic potential(ESP)distribution,and average local ionization energy(ALIE)on the molecular surface were used to highlight localization region,reveal the favorable electrophilic and nucleophilic attacks,and clearly explore the type of interactions that occurred around interesting regions.Second,first-principles based on density functional theory(DFT)was applied to study the hybrid mechanism of Aph on LDH system and elucidate their mutual interactions.The experimental and computational analyses suggest that the highπ-electron density and delocalization characteristics of the functional groups and benzene ring in the Aph molecule played a leading role in the synergistic effects arising from the combination of organic and inorganic coatings.This work provides a promising approach to design advanced hybrid materials with exceptional electrochemical performance.

Colorless to black switching with high contrast ratio via the electrochemical process of a hybrid organic-inorganic perovskite

Colorless‐to‐black switching has attracted widespread attention for smart windows and multifunctional displays because they are more useful to control solar energy.However,it still remains a challenge owing to the tremendous difficulties in the design of completely reverse absorptions in transmissive and colored states.Herein,we report on an electrochemical device that can switch between colorless and black by using the electrochemical process of hybrid organic–inorganic perovskite MAPbBr_(3),which shows a high integrated contrast ratio of up to 73%from 400 to 800 nm.The perovskite solution can be used as the active layer to assemble the device,showing superior transmittance over the entire visible region in neutral states.By applying an appropriate voltage,the device undergoes reversible switching between colorless and black,which is attributed to the formation of lead and Br_(2)in the redox reaction induced by the electron transfer process in MAPbBr_(3).In addition,the contrast ratio can be modulated over the entire visible region by changing the concentration and the applied voltage.These results contribute toward gaining an insightful understanding of the electrochemical process of perovskites and greatly promoting the development of switchable devices.

Syntheses and Characterizations of Two New Organic-inorganic Hybrids Based on Heteropolymolybdates and Piperidine Molecules

Two new organic-inorganic compounds [（CH2）5NH2]3[PMo12O40]·3[（CH2）NH] 1 and [（CH2）5NH2]6[P2Mo18O62]·5H2O 2 have been synthesized using conventional and hydrothermal methods, respectively, and characterized by elemental analyses, IR, TG and single-crystal X-ray diffraction. X-ray analyses show that in these compounds heteropolymolybdates [PMo12O40]^3- and [P2Mo18O62]^6- are reserved their Keggin or Dawson structures and linked to piperidine through electrostatic and hydrogen-bonding interactions.

The Production of Organic-Inorganic Compound Film-Coated Urea and the Characteristics of Its Nutrient Release

The effect of different concentrations of natural macromolecular compound on the characteristics of nutrient release in the membrane materials of organic-inorganic compound film-coated urea was discussed, and the optimal concentrations for better nutrient release was proposed. The characteristics of nutrient release of film-coated urea were evaluated by soil column leaching experiment. Organic-inorganic compound film-coated urea showed good characteristics of nutrient release, which could be well simulated by Logistic curve. The two parameters in this curve, a and r, can be used to present nutrient release of film-coated urea, and followed the order of B 〉 C 〉 A and C 〈 B 〈 A, respectively, indicating that the release was stronger with the increasing concentration of natural macromolecular compound in the membrane, which implied better controllability of nutrient release. The concentration of 5% of natural macromolecular compound showed better characteristic of nutrient release and can be utilized as a membrane material combined with inorganic mineral powders to develop film-coated slow-release fertilizer.

Ferroelectric Properties and Applications of Hybrid Organic-Inorganic Perovskites

Hybrid organic-inorganic perovskites （e.g. CH;NH;PbI;） have attracted tremendous attention due to their promise for achieving next-generation cost-effective and high performance optoelectronic devices.These hybrid organic-inorganic perovskites possess excellent optical and electronic properties, including strong light absorption, high carrier abilities, optimized charge diffusion lengths, and reduced charge recombination etc., leading to their widespread applications in advanced solar energy technologies （e.g.high efficiency perovskite solar cells）. However, there is still a lack of investigations regarding fundamental properties such as ferroelectricity in these perovskites.As conventional ferroelectric ceramics are prepared at high temperature and have no mechanically flexibility,low-temperature proceed and flexible perovskite ferroelectrics have become promising candidates and should be exploited for future flexible ferroelectric applications. Here, ferroelectric properties in hybrid organic-inorganic perovskites and several state-of-the-art perovskite ferroelectrics are reviewed. Novel ferroelectric applications of hybrid organic-inorganic perovskites are discussed as well, providing guideline for realizing future high performance and flexible ferroelectric devices.

A Novel Organic-Inorganic Complex: Synthesis and Crystal Structure of [Ca(DMSO)_5(H_2O)]_2SiMo_(12)O_(40)

A novel organic-inorganic complex [Ca(DMSO)5(H2O)]2SiMo12O40 was synthesized from CaCl2, DMSO and H4SiMo12O40nH2O in mixed solvent of acetonitrile and water. Its structure was characterized with elemental analysis, IR and X-ray diffraction analysis.

An Organic-inorganic Hybrid Assembly Based on Novel Arsenatomolybdate and Cu~Ⅰ-Organic Units

A novel organic-inorganic hybrid arsenatomolybdate based on infrequent[AsMoO(OH)]unit,[Cu ~I(phen)][AsMoO(OH)]·3HO(1,phen=1,10-phenanthroline),has been hydrothermally synthe-sized.This structure was determined by single-crystal X-ray diffraction analysis,and further characterized by elemental analysis,and IR and UV spectra.To the best of our knowledge,it is the first report of a novel arsenatomolybdate subunit[AsMoO(OH)].Photoluminescence of 1 is ascribed to???*emission of the aromatic rings derived from the phen ligand.

Effects of Combined Organic-inorganic Fertilization on Quality and Water Use Efficiency of Spring Maize under Equal Nitrogen Fertilization

The experiment was conducted in the abandoned land of Liangjia Village,Huayin City,Shaanxi Province from April to September 2019.The experimental crop was spring maize.A total of six treatments were set up in a randomized block design.The moisture content of the top 0-60 cm soil was determined regularly,and the yield and quality indices of maize at maturity were checked.The results show that:(i)combined organic-inorganic fertilization increased the yield of spring maize by 3%-8%.(ii)Compared with CK,fertilization treatments significantly improved the water use efficiency of spring maize,with an increase of 59.2%.The average water use efficiency of three combined organic-inorganic fertilization treatments was 27.81 kg/(ha·mm).Compared with CON,combined application of organic and inorganic fertilizers significantly improved the water use efficiency of spring maize,with an increase of 12.5%.(iii)The combined application of organic and inorganic fertilizers increased the moisture,total starch,crude protein and crude fat contents,and reduced crude fiber content of maize kernels.However,with the increase of the proportion of organic fertilizer,the crude protein content of maize kernels decreased.(iv)Yield of spring maize showed a significant parabolic relationship with soil water consumption.In summary,70%inorganic fertilizer+30%organic fertilizer is a scientific and reasonable way of fertilization.

Preparation of polythiophene/WO_3 organic-inorganic hybrids and their gas sensing properties for NO_2 detection at low temperature

Polythiophene/WO3（PTP/WO3）organic-inorganic hybrids were synthesized by an in situ chemical oxidative polymerization method,and char- acterized by X-ray diffraction（XRD）,transmission electron microscopy（TEM）and thermo-gravimetric analysis（TGA）.The Polythiophene/ WO3 hybrids have higher thermal stability than pure polythiophene,which is beneficial to potential application as chemical sensors.Gas sensing measurements demonstrate that the gas sensor based on the Polythiophene/WO3 hybrids has high response and good selectivity for de- tecting NO2 of ppm level at low temperature.Both the operating temperature and PTP contents have an influence on the response of PTP/WO3 hybrids to NO2.The 10 wt%PTP/WO3 hybrid showed the highest response at low operating temperature of 70-C.It is expected that the PTP/WO3 hybrids can be potentially used as gas sensor material for detecting the low concentration of NO2 at low temperature.

Recent advances in atomic imaging of organic-inorganic hybrid perovskites

Three-dimensional organic-inorganic hybrid perovskites(OHPs)hold a great prospect for photovoltaic applications due to their outstanding electronic and optical properties.These fascinating properties of OHPs in combination with their scalable and low-cost production make OHPs promising candidates for next-generation optoelectronic devices.The ability to obtain atomistic insights into physicochemical properties of this class of materials is crucial for the future development of this field.Recent advances in various scanning probe microscopy techniques have demonstrated their extraordinary capability in real-space imaging and spectroscopic measurements of the structural and electronic properties of OHPs with atomic-precision.Moreover,these techniques can be combined with light illumination to probe the structural and optoelectronic properties of OHPs close to the real device operation conditions.The primary focus of this review is to summarize the recent progress in atomic-scale studies of OHPs towards a deep understanding of the phenomena discovered in OHPs and OHP-based optoelectronic devices.

Synthesis and characterization of luminescent organic-inorganic hybrid nanocomposite from polyhedral oligomeric silsesquioxane

A novel polyhedral oligomeric silsesquioxane(POSS)-based organic-inorganic hybrid nanocomposite(EF-POSS) was prepared by Pt-catalyzed hydrosilylation reaction of octahydridosilsesquioxane(T_8H_8,POSS) with a luminescent substituted acetylene(2- ethynyl-7-(4-(4-methylstyryl)styryl)-9,9-dioctyl-9H-fluorene(EF)) in high yield.The hybrid nanocomposite was soluble in common solvents such as CH_2Cl_2,CHCl_3,THF and 1,4-dioxane.Its structure and property were characterized by FTIR, NMR,TGA,UV and PL,respectively.The results show that the hybrid nanocomposite with high thermal stability emits stable blue light as a result of photo excitation and possesses high photoluminescence quantum efficiency(φ_(FL)).

Preparation and properties of a POSS-containing organic-inorganic hybrid crosslinked polymer

A novel POSS-containing organic-inorganic hybrid crosslinked polymer was prepared by hydrosilylation reaction of octahydridosilsesquioxane （TsHs） with 4,4＇-bis（4-altyloxybenzoyloxy）phenyl （diene A）. Its structure and property was characterized by FFIR, 29Si NMR, TGA and ellipsometer, respectively. The results show that the hybrid polymer possesses high thermal stability and low dielectric constant of 1.97 at optical frequencies.

Synthesis and Crystal Structure of an Organic-inorganic Complex [Hg(DMSO)_2(H_2O)]_2 [GeW_(12)O_(40)]·DMSO·H_2O

An organic-inorganic mercury coordination compound [Hg（DMSO）2（H2O）]2 [GeW12O40]· DMSO·H2O （DMSO =dimethyl sulfoxide） has been synthesized and characterized by IR, UV spectra, elemental analysis, TG-DTA and X-ray single-crystal diffraction. Structural analysis revealed that in the title compound, the mercury is three-coordinated to show the distorted trigonal cone geometry, and depending on the electrostatic interaction to connect the polyanion [α-GeW12O40]^4-. TG-DTA study manifests the decomposition temperature of the polyanion framework in the title compound is 513.5℃, which is much higher than that of the anion framework. It means that the formation of the organic-inorganic mercury coordination compound made the polyanion [α-GeW12O40]^4- to he more stable.

Synthesis and crystal structure of an organic-inorganic complex [Cu(DMF)_3(H_2O)_2]_2[SiMo_(12)O_(40)]·2H_2O

The synthesis and crystal smacture of an polyoxometalate-based organic-inorganic complex [Cu（DMF）3（H2O）212[SiMo12O40].2H2O （DMF = N, N-dimethyl formamide） is described in this article. It was characterized using elemental analysis, thermal analysis, infrared, ultraviolet, and electron spin resonance spectroscopic studies. The X-ray crystallography analysis showed that the copper centers are pentacoordinated to show the square pyramidal geometry, and the polyanion [SiMo12O40]4- which is semi-coordinated to the copper（I/） centers prevents the existence of a sixth ligand. In addition, the intracationic hydrogen interaction enhanced the stability of the copper coordination cation.

Organic-inorganic Hybrid Materials Based on Piperidine Derivatives and Semi-conductive Metal Iodine

Reactions of piperidine derivatives 4-(aminomethyl)piperidine(4-AMPD) and 1-methylpiperidin-4-amine(1-MPDA) with semi-conductive metal iodine SbI3 and PbI2 in concentrated HI aqueous solution afforded two one-dimensional(1 D) chain compounds [(4-AMPD)SbI5]n(1), [(1-MPDA)SbI5]n(2) and a two-dimensional(2 D) single layered organicinorganic hybrid material [(1-MPDA)PbI4]n(3), which were confirmed by X-ray single-crystal diffraction, infrared(IR) spectroscopy and powder X-ray diffraction(PXRD). Simultaneously, compounds 1~3 exhibit strong emission peaks at 600 nm for 1 and 2 and 570 nm for 3, which were originated from their inorganic moieties.

Synthesis and Characterization of Layered Perovskite-type Organic-inorganic Hybrids(CnH2n+1NH3)2(CH3NH3)m-1PbmI3m+1(n=5-10,m=1,2)

Layered organic-inorganic hybrids（CnH2n＋1NH3）2（CH3NH3）m-1PbmI3m＋1 containing monolayer（m=1） and bilayer（m=2） perovsikte were synthesized by reactions in solution.The influences of the reactant ratio,solvent,reaction temperature,and reaction time on the structures of the products were investigated.The structures and the properties of the hybrids were characterized using X-ray diffraction（XRD）,scanning electron microscopy（SEM）,and ultraviolet and visible（UV） absorption spectroscopy.The XRD patterns and the SEM images demonstrate that the pure bilayer perovskite hybrids are obtained.The UV-vis spectra indicate that the number of the inorganic perovskite layer（m） has greater impact on the band gap than the number of the carbon atoms（n）.The band gap of bilayer hybrids（around 1.9 eV） is significantly less than that of monolayer hybrids（around 2.2 eV）.

Syntheses, Structures and Fluorescent Properties of Two 1D Chain Organic Amines and Metal Iodine Organic-inorganic Hybrid Compounds

Two bifunctional amines, 4-(2-aminoethyl)morpholine and histamine, were heated with PbI_2 and BiI_3 in concentrated HI aqueous solution to give one-dimensional(1D) organicinorganic hybrid compounds [(C_6H_(16)N_2O)PbI4]n(1) and [(C_(16)H_(20)N_(20))Bi_2I_(10)](2), respectively. In 1, the [PbI6] octahedra formed double chain anions through sharing-corner and-edge, and the protonated(C_6H_(16)N_2O)^(2+) cations were located at the vicinity of the double chains by hydrogen bonds. In 2, the [BiI_6] octahedra firstly formed dimeric [Bi_2I_(10)]^(4-) anion through sharing edge, and subsequently, the protonated histamine cations worked as bridge to link alternately with [Bi_2I_(10)]^(4-) anion by hydrogen bonds to form organic-inorganic hybrid 1D chains. In addition, compound 1 emitted a green light at the excitation wavelength of 400 nm and the maximum emission wavelength is at 503 nm.

Giant magneto field effect in up-conversion amplified spontaneous emission via spatially extended states in organic-inorganic hybrid perovskites

Up-conversion lasing actions are normally difficult to realize in light-emitting materials due to small multi-photon absorp-tion cross section and fast dephasing of excited states during multi-photon excitation.This paper reports an easily ac-cessible up-conversion amplified spontaneous emission(ASE)in organic-inorganic hybrid perovskites(MAPbBr3)films by optically exciting broad gap states with sub-bandgap laser excitation.The broad absorption was optimized by adjust-ing the grain sizes in the MAPbBr3 films.At low sub-bandgap pumping intensities,directly exciting the gap states leads to 2-photon,3-photon,and 4-photon up-conversion spontaneous emission,revealing a large optical cross section of multi-photon excitation occurring in such hybrid perovskite films.At moderate pumping intensity(1.19 mJ/cm2)of 700 nm laser excitation,a significant spectral narrowing phenomenon was observed with the full width at half maximum(FWHM)de-creasing from 18 nm to 4 nm at the peak wavelength of 550 nm,simultaneously with a nonlinear increase on spectral peak intensity,showing an up-conversion ASE realized at low threshold pumping fluence.More interestingly,the up-con-version ASE demonstrated a giant magnetic field effect,leading to a magneto-ASE reaching 120%.In contrast,the up-conversion photoluminescence(PL)showed a negligible magnetic field effect(<1%).This observation provides an evid-ence to indicate that the light-emitting states responsible for up-conversion ASE are essentially formed as spatially exten-ded states.The angular dependent spectrum results further verify the existence of spatially extended states which are polarized to develop coherent in-phase interaction.Clearly,using broad gap states with spatially extended light-emitting states presents a new approach to develop up-conversion ASE in organic-inorganic hybrid perovskites.