Syntheses, Structures and Fluorescent Properties of Two 1D Chain Organic Amines and Metal Iodine Organic-inorganic Hybrid Compounds

Two bifunctional amines, 4-(2-aminoethyl)morpholine and histamine, were heated with PbI_2 and BiI_3 in concentrated HI aqueous solution to give one-dimensional(1D) organicinorganic hybrid compounds [(C_6H_(16)N_2O)PbI4]n(1) and [(C_(16)H_(20)N_(20))Bi_2I_(10)](2), respectively. In 1, the [PbI6] octahedra formed double chain anions through sharing-corner and-edge, and the protonated(C_6H_(16)N_2O)^(2+) cations were located at the vicinity of the double chains by hydrogen bonds. In 2, the [BiI_6] octahedra firstly formed dimeric [Bi_2I_(10)]^(4-) anion through sharing edge, and subsequently, the protonated histamine cations worked as bridge to link alternately with [Bi_2I_(10)]^(4-) anion by hydrogen bonds to form organic-inorganic hybrid 1D chains. In addition, compound 1 emitted a green light at the excitation wavelength of 400 nm and the maximum emission wavelength is at 503 nm.

Colorless to black switching with high contrast ratio via the electrochemical process of a hybrid organic-inorganic perovskite

Colorless‐to‐black switching has attracted widespread attention for smart windows and multifunctional displays because they are more useful to control solar energy.However,it still remains a challenge owing to the tremendous difficulties in the design of completely reverse absorptions in transmissive and colored states.Herein,we report on an electrochemical device that can switch between colorless and black by using the electrochemical process of hybrid organic–inorganic perovskite MAPbBr_(3),which shows a high integrated contrast ratio of up to 73%from 400 to 800 nm.The perovskite solution can be used as the active layer to assemble the device,showing superior transmittance over the entire visible region in neutral states.By applying an appropriate voltage,the device undergoes reversible switching between colorless and black,which is attributed to the formation of lead and Br_(2)in the redox reaction induced by the electron transfer process in MAPbBr_(3).In addition,the contrast ratio can be modulated over the entire visible region by changing the concentration and the applied voltage.These results contribute toward gaining an insightful understanding of the electrochemical process of perovskites and greatly promoting the development of switchable devices.

Fabrication of branch-like Aph@LDH-MgO material through organic-inorganic hybrid conjugation for excellent anti-corrosion performance

Layered double hydroxides(LDH)frameworks have shown significant enhancement in stability and reusability,and their tailorable architecture brings new insight into the development of the next generation of hybrid materials,which attracted considerable attention in many fields over the years.One of the factors contributing to the widespread applicability of layered double hydroxides is their adaptable composition,which can accommodate a wide spectrum of potential anionic guests.This exceptional property makes the LDH system simple to adjust for various applications.However,most LDH systems are synthesized in situ in an autoclave at high temperatures and pressures that severely restrict the industrial use of such coating systems.In this study,LDH was directly synthesized on a magnesium alloy that had undergone plasma electrolytic oxidation(PEO)treatment in the presence of ethylenediaminetetraacetic acid,thereby avoiding the use of hydrothermal autoclave conditions.This LDH system was compared with a hybrid architecture consisting of organic-inorganic self-assembly.An organic layer was fabricated on top of the LDH film using 4-Aminophenol(Aph)compound,resulting in a smart hierarchical structure that can provide a robust Aph@LDH film with excellent anti-corrosion performance.At the molecular level,the conjugation characteristics and adsorption mechanism of Aph molecule were studied using two levels of theory as follows.First,Localized orbit locator(LOL)-πisosurface,electrostatic potential(ESP)distribution,and average local ionization energy(ALIE)on the molecular surface were used to highlight localization region,reveal the favorable electrophilic and nucleophilic attacks,and clearly explore the type of interactions that occurred around interesting regions.Second,first-principles based on density functional theory(DFT)was applied to study the hybrid mechanism of Aph on LDH system and elucidate their mutual interactions.The experimental and computational analyses suggest that the highπ-electron density and delocalization characteristics of the functional groups and benzene ring in the Aph molecule played a leading role in the synergistic effects arising from the combination of organic and inorganic coatings.This work provides a promising approach to design advanced hybrid materials with exceptional electrochemical performance.

Synthesis and Characterization of Poly(St-co-BA) Latex with an Organic-Inorganic Hybrid Compound as Emulsifier

A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size analyzer, transmission electron microscope (TEM), optical contact angle measurement (OCA) and dynamic mechanical analyzer (DMA). It was found that the protective agent, sodium polyacrylate (PA),could obviously improve the polymerization stability and the functional monomer, glycidyl methacrylate (GMA), could enhance the store stability of the latex. The particle size of poly(St-co-BA) latex decreased and then leveled off as OIHC content increased. TEM shows that the prepared polymers were actually organic-inorganic nanocomposites, and these films have better waterproof property than those prepared by traditional poly(St-co-BA) latex or organic silicone modified poly(St-co-BA) latex. The nanocomposite polymer has much higher glass transition temperature than organic silicone modified poly(St-co-BA) polymer containing the same organic silicone content.

A Porous Organic-inorganic Hybrid Compound Constructed from Polyoxovanadium Borate Anions,Dinuclear Na Sites and Metal-organic Units

A polyoxovanadium borate [Na（H2O）]2[Na（H2O）2]2[Cu（en）2][V12B18O54（OH）6]·（H3O）2·（H2O）18 1（en = ethylenediamine） has been hydrothermally synthesized and characterized by IR,two-dimensional infrared（2D IR） correlation spectroscopy with magnetic and thermal perturba-tion,thermal IR spectroscopy,thermal gravimetric analysis and single-crystal X-ray diffraction.It crystallizes in triclinic,space group P with a = 12.981（3）,b = 13.044（3）,c = 14.208（3） ,α = 63.98（3）,β = 77.17（3）,γ = 14.208（3）°,V = 2001.0（8） 3,Z = 1,Mr = 2518.05,Dc = 2.090 g/cm-1,F（000） = 1255.0,Mu（mm-1） = 1.756,λ（MoKα） = 0.71073 ,R = 0.0625 and wR = 0.1952.In 1,the [V12B18O54（OH）6]8- units are connected by [Cu（en）2]2＋,binuclear Na（1） and Na（2） to form a three-dimensional porous framework.

Synthesis and characterization of hybrid organic-inorganic materials based on EA-MAn-APTES and silica

Poly (EA-MAn-APTES)/silica hybrid materials were successfully prepared fromEthyl acrylate (EA), maleic anhydride (MAn) and tetraethoxysilane (TEOS) in the presence of acoupling agent 3-aminopropyltriethoxysilane (APTES),by free-radical solution polymerization and insitu sol-gel process. The mass fraction of TEOS varied from 0 to 25%. The hybrid materials werecharacterized by the methods of FT-IR spectra, solvent extraction, scanning electron microscope (SEM), transmission electron microscope (TEM), differential scanning calorimetry (DSC) andthermogravimetric analysis (TGA) measuring apparatus to get their structures, gel contents,morphologies, particle sizes and thermal performances. The results show that the covalent bonds arebetween organic and inorganic phases, gel contents in the hybrid materials are much higher, theSiO_2 phase is well dispersed in the polymer matrix, silicon dioxide exist at nanoscale in thecomposites and have excellent thermal stability.

Effect of cerium ion(Ⅲ) on corrosion resistance of organic-inorganic hybrid coating on surface of aluminum-tube used in refrigeration equipment

Organic?inorganic hybrid coating on the surface of aluminum-tube used in refrigeration equipment using cerium ion (III) as the additive was fabricated by sol?gel method, and the structure of the coating was confirmed by FT-IR. The results of the characterization show that the corrosion resistance of the coating with 1.5 mmol/L cerium ion (III) gains significant improvement, in which the colour retention time of CuSO4 extends to 500 s, the anti-acid and alkali corrosion rates reduce by 67% and 70% compared with the blank one, respectively, and the salt spray tests also show good corrosion resistance. The electrochemical tests demonstrate that the self-corrosion current density and potential of the sample with hybrid coating are about 2.877×10?7 A/cm2 and?0.550 V, respectively. The metallographic and SEM images show that the hybrid coating is uniform and dense, and the EDS analysis confirms that the coating is mainly composed of Al, Si and Ce elements.

Organic-Inorganic Interaction Recorded by Polycyclic Aromatic Steranes in Continental Epithermal Ore Deposits

Continental epithermal ore deposits are commonly associated with sedimentary organic matter,oils or solid bitumen.These organics embedded in mineral deposits can convey valuable information of the ore genesis.However,the extent to which the formation of ore minerals was recorded by organic compounds remains largely unknown,as also is how metal-rich ores interfere with the molecular proxies in the temperature regime envisaged for hydrothermal activity.The molecular compositional changes of various polycyclic aromatic steranes and polycyclic aromatic hydrocarbons and compounds derived from the Jinding Pb/Zn deposit,SW China provide new data.Aliphatic regular steranes are present as traces.The transformation from polycyclic aromatic steranes to unsubstituted polycyclic aromatic hydrocarbons is observed to show an increased trend with increasing hydrothermal alteration levels;this is consistent with the transformation from unsubstituted polycyclic aromatic hydrocarbons to heterocyclic compounds.Dehydrocyclization(aromatization)of polycyclic biological compounds and hydrodecyclization(dearomatization)of polycyclic aromatic compounds are two important reaction pathways in hydrothermal systems with moderate temperature.This detailed investigation of organicinorganic interactions of two groups of polycyclic compounds with metal-rich ores provides insights into the questions on how and to what extent the formation of Pb/Zn deposits can be recorded by organics.This work will improve our understanding of carbon reduction,oxidation or condensation in the deep Earth and the carbon exchange between the Earth's crust and mantle,and may shed light on the processes for ultra-deep hydrocarbon exploration.

The Production of Organic-Inorganic Compound Film-Coated Urea and the Characteristics of Its Nutrient Release

The effect of different concentrations of natural macromolecular compound on the characteristics of nutrient release in the membrane materials of organic-inorganic compound film-coated urea was discussed, and the optimal concentrations for better nutrient release was proposed. The characteristics of nutrient release of film-coated urea were evaluated by soil column leaching experiment. Organic-inorganic compound film-coated urea showed good characteristics of nutrient release, which could be well simulated by Logistic curve. The two parameters in this curve, a and r, can be used to present nutrient release of film-coated urea, and followed the order of B 〉 C 〉 A and C 〈 B 〈 A, respectively, indicating that the release was stronger with the increasing concentration of natural macromolecular compound in the membrane, which implied better controllability of nutrient release. The concentration of 5% of natural macromolecular compound showed better characteristic of nutrient release and can be utilized as a membrane material combined with inorganic mineral powders to develop film-coated slow-release fertilizer.

Syntheses and Characterizations of Two New Organic-inorganic Hybrids Based on Heteropolymolybdates and Piperidine Molecules

Two new organic-inorganic compounds [（CH2）5NH2]3[PMo12O40]·3[（CH2）NH] 1 and [（CH2）5NH2]6[P2Mo18O62]·5H2O 2 have been synthesized using conventional and hydrothermal methods, respectively, and characterized by elemental analyses, IR, TG and single-crystal X-ray diffraction. X-ray analyses show that in these compounds heteropolymolybdates [PMo12O40]^3- and [P2Mo18O62]^6- are reserved their Keggin or Dawson structures and linked to piperidine through electrostatic and hydrogen-bonding interactions.

Preparation of polythiophene/WO_3 organic-inorganic hybrids and their gas sensing properties for NO_2 detection at low temperature

Polythiophene/WO3（PTP/WO3）organic-inorganic hybrids were synthesized by an in situ chemical oxidative polymerization method,and char- acterized by X-ray diffraction（XRD）,transmission electron microscopy（TEM）and thermo-gravimetric analysis（TGA）.The Polythiophene/ WO3 hybrids have higher thermal stability than pure polythiophene,which is beneficial to potential application as chemical sensors.Gas sensing measurements demonstrate that the gas sensor based on the Polythiophene/WO3 hybrids has high response and good selectivity for de- tecting NO2 of ppm level at low temperature.Both the operating temperature and PTP contents have an influence on the response of PTP/WO3 hybrids to NO2.The 10 wt%PTP/WO3 hybrid showed the highest response at low operating temperature of 70-C.It is expected that the PTP/WO3 hybrids can be potentially used as gas sensor material for detecting the low concentration of NO2 at low temperature.

Synthesis and characterization of luminescent organic-inorganic hybrid nanocomposite from polyhedral oligomeric silsesquioxane

A novel polyhedral oligomeric silsesquioxane(POSS)-based organic-inorganic hybrid nanocomposite(EF-POSS) was prepared by Pt-catalyzed hydrosilylation reaction of octahydridosilsesquioxane(T_8H_8,POSS) with a luminescent substituted acetylene(2- ethynyl-7-(4-(4-methylstyryl)styryl)-9,9-dioctyl-9H-fluorene(EF)) in high yield.The hybrid nanocomposite was soluble in common solvents such as CH_2Cl_2,CHCl_3,THF and 1,4-dioxane.Its structure and property were characterized by FTIR, NMR,TGA,UV and PL,respectively.The results show that the hybrid nanocomposite with high thermal stability emits stable blue light as a result of photo excitation and possesses high photoluminescence quantum efficiency(φ_(FL)).

An Organic-inorganic Hybrid Assembly Based on Novel Arsenatomolybdate and Cu~Ⅰ-Organic Units

A novel organic-inorganic hybrid arsenatomolybdate based on infrequent[AsMoO(OH)]unit,[Cu ~I(phen)][AsMoO(OH)]·3HO(1,phen=1,10-phenanthroline),has been hydrothermally synthe-sized.This structure was determined by single-crystal X-ray diffraction analysis,and further characterized by elemental analysis,and IR and UV spectra.To the best of our knowledge,it is the first report of a novel arsenatomolybdate subunit[AsMoO(OH)].Photoluminescence of 1 is ascribed to???*emission of the aromatic rings derived from the phen ligand.

Giant magneto field effect in up-conversion amplified spontaneous emission via spatially extended states in organic-inorganic hybrid perovskites

Up-conversion lasing actions are normally difficult to realize in light-emitting materials due to small multi-photon absorp-tion cross section and fast dephasing of excited states during multi-photon excitation.This paper reports an easily ac-cessible up-conversion amplified spontaneous emission(ASE)in organic-inorganic hybrid perovskites(MAPbBr3)films by optically exciting broad gap states with sub-bandgap laser excitation.The broad absorption was optimized by adjust-ing the grain sizes in the MAPbBr3 films.At low sub-bandgap pumping intensities,directly exciting the gap states leads to 2-photon,3-photon,and 4-photon up-conversion spontaneous emission,revealing a large optical cross section of multi-photon excitation occurring in such hybrid perovskite films.At moderate pumping intensity(1.19 mJ/cm2)of 700 nm laser excitation,a significant spectral narrowing phenomenon was observed with the full width at half maximum(FWHM)de-creasing from 18 nm to 4 nm at the peak wavelength of 550 nm,simultaneously with a nonlinear increase on spectral peak intensity,showing an up-conversion ASE realized at low threshold pumping fluence.More interestingly,the up-con-version ASE demonstrated a giant magnetic field effect,leading to a magneto-ASE reaching 120%.In contrast,the up-conversion photoluminescence(PL)showed a negligible magnetic field effect(<1%).This observation provides an evid-ence to indicate that the light-emitting states responsible for up-conversion ASE are essentially formed as spatially exten-ded states.The angular dependent spectrum results further verify the existence of spatially extended states which are polarized to develop coherent in-phase interaction.Clearly,using broad gap states with spatially extended light-emitting states presents a new approach to develop up-conversion ASE in organic-inorganic hybrid perovskites.

Recent advances in atomic imaging of organic-inorganic hybrid perovskites

Three-dimensional organic-inorganic hybrid perovskites(OHPs)hold a great prospect for photovoltaic applications due to their outstanding electronic and optical properties.These fascinating properties of OHPs in combination with their scalable and low-cost production make OHPs promising candidates for next-generation optoelectronic devices.The ability to obtain atomistic insights into physicochemical properties of this class of materials is crucial for the future development of this field.Recent advances in various scanning probe microscopy techniques have demonstrated their extraordinary capability in real-space imaging and spectroscopic measurements of the structural and electronic properties of OHPs with atomic-precision.Moreover,these techniques can be combined with light illumination to probe the structural and optoelectronic properties of OHPs close to the real device operation conditions.The primary focus of this review is to summarize the recent progress in atomic-scale studies of OHPs towards a deep understanding of the phenomena discovered in OHPs and OHP-based optoelectronic devices.

Recent Advances in Organic-inorganic Hybrid Photoresists

Photoresists are radiation-sensitive materials used for forming patterns to build up IC devices.To date,most photoresists have been based on organic polymers,which have been dominating the semiconductor industries over the past few decades.It is obvious that extreme ultraviolet(EUV)lithography has become the next-generation lithography technology.The development of comprehensive performance EUV resist is one of the most critical issues.However,organic polymeric photoresists are difficult to meet the harsh requirements of EUV lithography.Pure inorganic photoresists such as metal salts,hydrogen silsesquioxane(HSQ)are expected for EUV lithography due to their high resistance and high resolution.But the low sensitivity makes them not suitable for high volume manufacturing(HVM).Organic-inorganic hybrid photoresists,containing both organic and inorganic components,are regarded as one of the most promising EUV resists.They combine both merits of organic and inorganic materials and have significant advantages in machinability,etching resistance,EUV absorption,and chemical/thermal stability.Organic-inorganic hybrid photoresists are considered as ideal materials for realizing industrialgrade patterns below 10 nm.This review mainly focuses on the development of organic-inorganic hybrid photoresists over the past decade.

Efficient removal of U(VI) from wastewater by a sponge-like 3D porous architecture with hybrid electrospun nanofibers

Removal of uranium(VI)from nuclear wastewater is urgent due to the global nuclear energy exploitation.This study synthesized novel sponge-like 3D porous materials for enhanced uranium adsorption by combining electrospinning and fibrous freeze-shaping techniques.The materials possessed an organic-inorganic hybrid architecture based on the electrospun fibers of polyacrylonitrile(PAN)and SiO_(2).As a sup-porting material,the surface of fibrous SiO_(2) could be further functionalized by cyano groups via(3-cyanopropyl)triethoxysilane.All the cyano groups were turned into amidoxime(AO)groups to obtain a amidoxime-functionalized sponge(PAO/SiO_(2)-AO)through the subsequent ami-doximation process.The proposed sponge exhibited enhanced uranium adsorption performance with a high removal capacity of 367.12 mg/g,a large adsorption coefficient of 4.0×10^(4)mL/g,and a high removal efficiency of 97.59%.The UO_(2)^(2+)adsorption kinetics perfectly conformed to the pseudo-second-order reaction.The sorbent also exhibited an excellent selectivity for UO_(2)^(2+) with other interfering metal ions.2023 Hohai University.Production and hosting by Elsevier B.V.

Recent progress of hybrid cathode interface layer for organic solar cells

Organic solar cells(OSCs)have gained conspicuous progress during the past few decades due to the development of materials and upgrading of the device structure.The power conversion efficiency(PCE)of the single-junction device had surpassed 19%.The cathode interface layer(CIL),by optimizing the connection between the active layer and the cathode electrode,has become a momentous part to strengthen the performances of the OSCs.Simultaneously,CIL is also indispensable to illustrating the working mechanism of OSCs and enhancing the stability of the OSCs.In this essay,hybrid CILs in OSCs have been summarized.Firstly,the advancement and operating mechanism of OSCs,and the effects and relevant design rules of CIL are briefly concluded;secondly,the significant influence of CIL on enhancing the stability and PCE of OSCs is presented;thirdly,the characteristics of organic hybrid CIL and organic-inorganic hybrid CIL are introduced.Finally,the conclusion and outlook of CIL are summarized.

Preparation and properties of a POSS-containing organic-inorganic hybrid crosslinked polymer

A novel POSS-containing organic-inorganic hybrid crosslinked polymer was prepared by hydrosilylation reaction of octahydridosilsesquioxane （TsHs） with 4,4＇-bis（4-altyloxybenzoyloxy）phenyl （diene A）. Its structure and property was characterized by FFIR, 29Si NMR, TGA and ellipsometer, respectively. The results show that the hybrid polymer possesses high thermal stability and low dielectric constant of 1.97 at optical frequencies.

Organic-inorganic Hybrid Materials Based on Piperidine Derivatives and Semi-conductive Metal Iodine

Reactions of piperidine derivatives 4-(aminomethyl)piperidine(4-AMPD) and 1-methylpiperidin-4-amine(1-MPDA) with semi-conductive metal iodine SbI3 and PbI2 in concentrated HI aqueous solution afforded two one-dimensional(1 D) chain compounds [(4-AMPD)SbI5]n(1), [(1-MPDA)SbI5]n(2) and a two-dimensional(2 D) single layered organicinorganic hybrid material [(1-MPDA)PbI4]n(3), which were confirmed by X-ray single-crystal diffraction, infrared(IR) spectroscopy and powder X-ray diffraction(PXRD). Simultaneously, compounds 1~3 exhibit strong emission peaks at 600 nm for 1 and 2 and 570 nm for 3, which were originated from their inorganic moieties.