The paper puts forward a method on controlling the AM-OLED panel to display image with high gray scale levels. It also gives an ASIC design sample to implement this method. A twenty sub-fields scan scheme has been tak...The paper puts forward a method on controlling the AM-OLED panel to display image with high gray scale levels. It also gives an ASIC design sample to implement this method. A twenty sub-fields scan scheme has been taken into use in the chip to display 256 gray scale levels on a QVGA resolution AM-OLED display screen. The functions of image scaling and rotating have also been implemented for multiply application. The simulation and chip test result show that the chip design has met the design requirements.展开更多
The major features of the display technologies for 3G cellular phone are reviewed. The comparison between their potential candidates for 3G cellular phone is given, and a detailed discussion is made on passive matrix ...The major features of the display technologies for 3G cellular phone are reviewed. The comparison between their potential candidates for 3G cellular phone is given, and a detailed discussion is made on passive matrix organic electroluminescent display technology. A novel method to improve display contrast ratio is presented. Finally several 3G phone set prototypes with OLED display panels are given as well as the market forecast.展开更多
The key project'Nano-scale catalyst and related process research and development activity for high-efficiency synthesis of mixed lower alcohols from syngas'undertaken by the Shanghai Senior Research Institute ...The key project'Nano-scale catalyst and related process research and development activity for high-efficiency synthesis of mixed lower alcohols from syngas'undertaken by the Shanghai Senior Research Institute of CAS has passed the acceptance tests by the expert group organized by the Shanghai Science and Technology Commission.展开更多
A P^＋-nc-Si：H film（boron-doped nc-Si：H thin film） was used as a complex anode of an OLED.As an ideal candidate for the composite anode,the P^＋-nc-Si：H thin film has a good conductivity with a high work function...A P^＋-nc-Si：H film（boron-doped nc-Si：H thin film） was used as a complex anode of an OLED.As an ideal candidate for the composite anode,the P^＋-nc-Si：H thin film has a good conductivity with a high work function（- 5.7 eV） and outstanding optical properties of high reflectivity,transmission,and a very low absorption.As a result,the combination of the relatively high reflectivity of a P^＋-nc-Si：H film/ITO complex anode with the very high reflectivity of an Al cathode could form a micro-cavity structure with a certain Q to improve the efficiency of the OLED fabricated on it.An RGB pixel generated by microcavity OLEDs is beneficial for both the reduction of the light loss and the improvement of the color purity and the efficiency.The small molecule Alq would be useful for the emitting light layer（EML） of the MOLED,and the P^＋-nc-Si film would be used as a complex anode of the MOLED,whose configuration can be constructed as Glass/LTO/P^＋-nc-Si：H/ITO/MoO3/NPB/Alq/LiF/Al.By adjusting the thickness of the organic layer NPB/Alq,the optical length of the microcavity and the REB colors of the device can be obtained.The peak wavelengths of an OLED are located at 486,550,and 608 nm,respectively.The CIE coordinates are（0.21,0.45）,（0.33,0.63）,and（0.54,0.54）,and the full widths at half maximum（FWHM） are 35,32,and 39 nm for red,green,and blue,respectively.展开更多
基金Project supported by the Science and Technology Commission of Shanghai Municipality(Grant No.09530708600)the Shanghai AM Foundation(Grant No.09700714000)
文摘The paper puts forward a method on controlling the AM-OLED panel to display image with high gray scale levels. It also gives an ASIC design sample to implement this method. A twenty sub-fields scan scheme has been taken into use in the chip to display 256 gray scale levels on a QVGA resolution AM-OLED display screen. The functions of image scaling and rotating have also been implemented for multiply application. The simulation and chip test result show that the chip design has met the design requirements.
文摘The major features of the display technologies for 3G cellular phone are reviewed. The comparison between their potential candidates for 3G cellular phone is given, and a detailed discussion is made on passive matrix organic electroluminescent display technology. A novel method to improve display contrast ratio is presented. Finally several 3G phone set prototypes with OLED display panels are given as well as the market forecast.
文摘The key project'Nano-scale catalyst and related process research and development activity for high-efficiency synthesis of mixed lower alcohols from syngas'undertaken by the Shanghai Senior Research Institute of CAS has passed the acceptance tests by the expert group organized by the Shanghai Science and Technology Commission.
基金supported by the National High Technology Research and Development Program of China(No.2004AA303570)the National Natural Science Foundation of China (No. 60437030)
文摘A P^＋-nc-Si：H film（boron-doped nc-Si：H thin film） was used as a complex anode of an OLED.As an ideal candidate for the composite anode,the P^＋-nc-Si：H thin film has a good conductivity with a high work function（- 5.7 eV） and outstanding optical properties of high reflectivity,transmission,and a very low absorption.As a result,the combination of the relatively high reflectivity of a P^＋-nc-Si：H film/ITO complex anode with the very high reflectivity of an Al cathode could form a micro-cavity structure with a certain Q to improve the efficiency of the OLED fabricated on it.An RGB pixel generated by microcavity OLEDs is beneficial for both the reduction of the light loss and the improvement of the color purity and the efficiency.The small molecule Alq would be useful for the emitting light layer（EML） of the MOLED,and the P^＋-nc-Si film would be used as a complex anode of the MOLED,whose configuration can be constructed as Glass/LTO/P^＋-nc-Si：H/ITO/MoO3/NPB/Alq/LiF/Al.By adjusting the thickness of the organic layer NPB/Alq,the optical length of the microcavity and the REB colors of the device can be obtained.The peak wavelengths of an OLED are located at 486,550,and 608 nm,respectively.The CIE coordinates are（0.21,0.45）,（0.33,0.63）,and（0.54,0.54）,and the full widths at half maximum（FWHM） are 35,32,and 39 nm for red,green,and blue,respectively.
