基于改进Oriented R-CNN的旋转框麦穗检测与计数模型

为对干扰、遮挡等复杂的田野环境中麦穗进行精准定位与计数,该研究提出了一种改进的Oriented R-CNN麦穗旋转框检测与计数方法,首先在主干网络中引入跨阶段局部空间金字塔(spatial pyramid pooling cross stage partial networks,SPPCSPC)模块扩大模型感受野,增强网络感知能力;其次,在颈网络中结合路径聚合网络(PANet,path aggregation network)和混合注意力机制(E2CBAM,efficient two convolutional block attention module),丰富特征图包含的特征信息;最后采用柔性非极大值抑制算法(Soft-NMS,soft-non maximum suppression)优化预测框筛选过程。试验结果显示,改进的模型对复杂环境中的麦穗检测效果良好。相较原模型,平均精确度均值mAP提高了2.02个百分点,与主流的旋转目标检测模型Gliding vertex、R3det、Rotated Faster R-CNN、S2anet和Rotated Retinanet相比,mAP分别提高了4.99、2.49、3.94、2.25和4.12个百分点。该研究方法利用旋转框准确定位麦穗位置,使得框内背景区域面积大幅度减少,为实际观察麦穗生长状况和统计数量提供了一种有效的方法。

Estimation of cancer cell migration in biomimetic random/oriented collagen fiber microenvironments

Increasing data indicate that cancer cell migration is regulated by extracellular matrixes and their surrounding biochemical microenvironment,playing a crucial role in pathological processes such as tumor invasion and metastasis.However,conventional two-dimensional cell culture and animal models have limitations in studying the influence of tumor microenvironment on cancer cell migration.Fortunately,the further development of microfluidic technology has provided solutions for the study of such questions.We utilize microfluidic chip to build a random collagen fiber microenvironment(RFM)model and an oriented collagen fiber microenvironment(OFM)model that resemble early stage and late stage breast cancer microenvironments,respectively.By combining cell culture,biochemical concentration gradient construction,and microscopic imaging techniques,we investigate the impact of different collagen fiber biochemical microenvironments on the migration of breast cancer MDA-MB-231-RFP cells.The results show that MDA-MB-231-RFP cells migrate further in the OFM model compared to the RFM model,with significant differences observed.Furthermore,we establish concentration gradients of the anticancer drug paclitaxel in both the RFM and OFM models and find that paclitaxel significantly inhibits the migration of MDA-MB-231-RFP cells in the RFM model,with stronger inhibition on the high concentration side compared to the low concentration side.However,the inhibitory effect of paclitaxel on the migration of MDA-MB-231-RFP cells in the OFM model is weak.These findings suggest that the oriented collagen fiber microenvironment resembling the late-stage tumor microenvironment is more favorable for cancer cell migration and that the effectiveness of anticancer drugs is diminished.The RFM and OFM models constructed in this study not only provide a platform for studying the mechanism of cancer development,but also serve as a tool for the initial measurement of drug screening.

Oriented Bounding Box Object Detection Model Based on Improved YOLOv8

In the study of oriented bounding boxes(OBB)object detection in high-resolution remote sensing images,the problem of missed and wrong detection of small targets occurs because the targets are too small and have different orientations.Existing OBB object detection for remote sensing images,although making good progress,mainly focuses on directional modeling,while less consideration is given to the size of the object as well as the problem of missed detection.In this study,a method based on improved YOLOv8 was proposed for detecting oriented objects in remote sensing images,which can improve the detection precision of oriented objects in remote sensing images.Firstly,the ResCBAMG module was innovatively designed,which could better extract channel and spatial correlation information.Secondly,the innovative top-down feature fusion layer network structure was proposed in conjunction with the Efficient Channel Attention(ECA)attention module,which helped to capture inter-local cross-channel interaction information appropriately.Finally,we introduced an innovative ResCBAMG module between the different C2f modules and detection heads of the bottom-up feature fusion layer.This innovative structure helped the model to better focus on the target area.The precision and robustness of oriented target detection were also improved.Experimental results on the DOTA-v1.5 dataset showed that the detection Precision,mAP@0.5,and mAP@0.5:0.95 metrics of the improved model are better compared to the original model.This improvement is effective in detecting small targets and complex scenes.

Three-dimensionally oriented organization of hexagonal MIL-96 microplates toward superior film microstructure

Preferential orientation control of metal—organic framework(MOF)films is advantageous for maximizing pore uniformity and minimizing grain-boundary defects.Nonetheless,the preparation of MOF films with both in-plane and out-of-plane orientations remains a grand challenge.In this study,we reported the preparation of three-dimensionally oriented MIL-96 layers through combining morphology control of MIL-96 seeds with addition of polyvinylpyrrolidone surfactants and arachidonic acids.The three-dimensionally oriented MIL-96 film was readily obtained through in-plane epitaxial growth.It is anticipated that the aforementioned protocol can be effective for obtaining diverse MOF films with a three-dimensionally oriented organization.

Analysis of the Effect of Problem-Oriented Nursing Intervention on Patients with Lower Extremity Arteriosclerosis Obliterans in Vascular Surgery

Objective: To analyze the effect of problem-oriented nursing intervention on patients with lower extremity arteriosclerosis obliterans (ASO) in vascular surgery. Methods: The clinical data of 128 patients with lower extremity ASO in vascular surgery were selected and randomly divided into groups A and B, with 64 cases each. Group A is the control group, and Group B is the observation group. Group A received the routine nursing intervention, and Group B received the problem-oriented nursing intervention. The compliance, self-care ability, psychological state, quality of life, and nursing satisfaction of the two groups of patients were evaluated based on various indicators. Results: After the intervention, the evaluation of self-care ability (ESCA) score of the patients in Group B was higher than that of Group A, and the symptom checklist-90 (SCL-90) score was lower than that of Group A. The differences were significant (t = 10.019, t = 3.118, P < 0.01). After the intervention, the World Health Organization Quality of Life Brief (WHOQOL-BREF) index scores of the two groups increased and the increase in Group B was significantly higher than Group A (P < 0.001). The compliance rate of Group B (62/ 96.88%) was higher than that of Group A (52/ 81.25%), and the difference was extremely significant (χ2 = 8.020, P < 0.01). Conclusion: Problem-oriented nursing intervention for patients with lower extremity ASO in vascular surgery improved the patient’s self-care ability, and quality of life, reduced the patient’s negative emotions, and enhanced their overall satisfaction.

Constructing an ion‐oriented channel on a zinc electrode through surface engineering

The inherent shortcomings of a zinc anode in aqueous zinc‐ion batteries(ZIBs)such as zinc dendrites and side reactions severely limit their practical application.Herein,to address these issues,an ion‐oriented transport channel constructed by graphdiyne(GDY)nanowalls is designed and grown in situ on the surface of a zinc electrode.The vertically stacked GDY nanowalls with a unique hierarchical porous structure and mechanical properties form a nanomesh‐like interface on the zinc electrode,acting as an ion‐oriented channel,which can efficiently confine the segmented growth of zinc metal in microscopic regions of hundreds of nanometers.In those microscopic regions,the uniform domain current density is effortlessly maintained compared with a large surface area,thereby inhibiting zinc dendrites effectively.Besides,due to the presence of the ion‐oriented channel,the modified zinc anode demonstrates long‐term stable zinc plating/stripping performance for more than 600 h at 1 mAh cm^(−2)in an aqueous electrolyte.In addition,full‐cells coupled with MnO2 show high specific capacity and power density,as well as excellent cycling stability with a capacity retention of 82%after 5000 cycles at 1 A g^(−1).This work provides a feasible and accessible surface engineering approach to modify the electrode interface for confined and dendrite‐free zinc deposition in aqueous ZIBs.

Construction of Oriented Structure in Inner Surface of Small-Diameter Artificial Blood Vessels:A Review

There is an urgent need for small-diameter artificial blood vessels in clinic.Physical,chemical and biological factors should be integrated to avoid thrombosis and intimal hyperplasia after implantation and to promote successful fabrication of small-diameter artificial blood vessels.From a physical perspective,the internal oriented structures of natural blood vessels plays an important role in guiding the directional growth of cells,improving the blood flow environment,and promoting the regeneration of vascular tissue.In this review,the effects of the oriented structures on cells,including endothelial cells(ECs),smooth muscle cells(SMCs)and stem cells,as well as the effect of the oriented structures on hemodynamics and vascular tissue remodeling and regeneration are introduced.Various forms of oriented structures(fibers,grooves,channels,etc.)and their construction methods are also reviewed.Conclusions and future perspectives are given.It is expected to give some references to relevant researches.

Complexity of Injective Homomorphisms to Small Tournaments, and of Injective Oriented Colourings

Several possible definitions of local injectivity for a homomorphism of an oriented graph G to an oriented graph H are considered. In each case, we determine the complexity of deciding whether there exists such a homomorphism when G is given and H is a fixed tournament on three or fewer vertices. Each possible definition leads to a locally-injective oriented colouring problem. A dichotomy theorem is proved in each case.

Oriented quantum coalgebra structure on the tensor product of an oriented quantum coalgebra with itself

Oriented quantum algebras （coalgebras） are generalizations of quasitriangular Hopf algebras （coquasitriangular Hopf algebras） and account for regular isotopy invariants of oriented 1-1 tangles, oriented knots and links. Let （H, or, D, U） be an oriented quantum coalgebra over the field k. Then （H×H, φ, D×D, U× U） is a trivial oriented quantum coalgebra structure on the tensor product of coalgebra H with itself, where φ （a × b, c × d） = σ-（ a, c）σ （b, d）. This paper presents the oriented quantum coalgebra structure （ H×H, σ, D×D, U× U） on coalgebra H× H, where σ（ a × b, c× d） = σ ^-1 （ d1, a1 ） σ（ a2, c1 ） σ^-1 （ d2, b1 ） σ（ b2, c2 ）. So a nontrivial oriented quantum coalgebra structure is obtained and it is dual to Radford＇s results in the paper ＂On the tensor product of an oriented quantum algebra with itself＂ published in 2007. Theoretically, the results of this paper are important in constructing the invariants of oriented knots and links.

Exploring heteroepitaxial growth and electrical properties of α-Ga_(2)O_(3) films on differently oriented sapphire substrates

This study explores the epitaxial relationship and electrical properties of α-Ga_(2)O_(3) thin films deposited on a-plane, mplane, and r-plane sapphire substrates. We characterize the thin films by X-ray diffraction and Raman spectroscopy, and elucidate thin film epitaxial relationships with the underlying sapphire substrates. The oxygen vacancy concentration of α-Ga_(2)O_(3) thin films on m-plane and r-plane sapphire substrates are higher than α-Ga_(2)O_(3) thin film on a-plane sapphire substrates. All three thin films have a high transmission of over 80% in the visible and near-ultraviolet regions, and their optical bandgaps stay around 5.02–5.16 eV. Hall measurements show that the α-Ga_(2)O_(3) thin film grown on r-plane sapphire has the highest conductivity of 2.71 S/cm, which is at least 90 times higher than the film on a-plane sapphire. A similar orientation-dependence is seen in their activation energy as revealed by temperature-dependent conductivity measurements, with 0.266, 0.079, and 0.075eV for the film on a-, m-, r-plane, respectively. The origin of the distinct transport behavior of films on differently oriented substrates is suggested to relate with the distinct evolution of oxygen vacancies at differently oriented substrates. This study provides insights for the substrate selection when growing α-Ga_(2)O_(3) films with tunable transport properties.

Case Study of Service Oriented Enterprise Architecture Framework

Many organizations have now adopted Service Oriented Architecture （SOA） as an architectural style to help them with architecture, design and implementation of their core services and systems. Most of these organizations are challenged in integrating SOA style with their overall Enterprise Architecture work. This framework links an SOA style with the Enterprise Architecture （EA） methodologies to help organizations organize their SOA effort as a key part of their Enterprise Architecture. The case study demonstrates the implementation of architecture goal with organization vision in service oriented organizational structure using services that align Business with Technology. The framework is validated and has reserved the privileges of SOA and EA.

Method of Establishing Object-Oriented System Structure for Decision Support System

In order to solve existing problems about the method of establishing traditional system structure of decision support system(DSS), O S chart is applied to describe object oriented system structure of general DSS, and a new method of eight specific steps is proposed to establish object oriented system structure of DSS by using the method of O S chart, which is applied successfully to the development of the DSS for the energy system ecology engineering research of the Wangheqiu country. Supplying many scientific effective computing models, decision support ways and a lot of accurate reliable decision data, the DSS plays a critical part in helping engineering researchers to make correct decisions. Because the period for developing the DSS is relatively shorter, the new way improves the efficiency of establishing DSS greatly. It also makes the DSS of system structure more flexible and easy to expand.

Palm Print Identification Using Improved Histogram of Oriented Lines

Automatic palmprint identification has received much attention in security applications and law enforcement. The performance of a palmprint identification system is improved by means of feature extraction and classification. Feature extraction methods such as Subspace learning are highly sensitive to the rotation variances, translation and illumination in image identification. Thus, Histogram of Oriented Lines (HOL) has not obtained promising performance for palmprint recognition so far. In this paper, we propose a new descriptor of palmprint named Improved Histogram of Oriented Lines (IHOL), which is an alternative of HOL. Improved HOL is not very sensitive to changes of translation and illumination, and has the robustness against small transformations whereas the small translation and rotations make no change in histogram value adjustment of the proposed work. The experiment results show that based on IHOL, with Principal Component Analysis (PCA) subspace learning can achieve high recognition rates. The proposed method (IHOL-Cosine distance) improves 1.30% on PolyU I database, and similarly (IHOL-Euclidean distance) improves 2.36% on COEP database compared with existing HOL method.

Structure-oriented edge-preserving smoothing based on accurate estimation of orientation and edges

In this paper, we present a new method for reducing seismic noise while preserving structural and stratigraphic discontinuities. Structure-oriented edge-preserving smoothing requires information such as the local orientation and edge of the reflections. The information is usually estimated from seismic data with full frequency bandwidth. When the data has a very low signal to noise ratio （SNR）, the noise usually reduces the estimation accuracy. For seismic data with extremely low SNR, the dominant frequency has higher SNR than other frequencies, so it can provide orientation and edge information more reliably than other frequencies. Orientation and edge are usually described in terms of apparent reflection dips and coherence differences, respectively. When frequency changes, both dip and coherence difference change more slowly than the seismogram itself. For this reason, dip and coherence estimated from dominant frequency data can approximately represent those of other frequency data. Ricker wavelet are widely used in seismic modeling. The Marr wavelet has the same shape as Ricker wavelets in both time and frequency domains, so the Marr wavelet transform is selected to divide seismic data into several frequency bands. Reflection apparent dip as well as the edge information can be obtained by scanning the dominant frequency data. This information can be used to selectively smooth the frequency bands （dominant, low, and high frequencies） separately by structure-oriented edge-preserving smoothing technology. The ultimate noise-suppressed seismic data is the combination of the smoothed frequency band data. Application to synthetic and real data shows the method can effectively reduce noise, preserve edges, improve trackable reflection continuity, and maintain useful information in seismic data.

Stator-Flux Oriented Continuous Control of Torque in Induction Motors

This paper analyzes dynamic equivalent circuit of induction motor and the relationship among inner fluxes, then presents a direct stator flux oriented continuous torque control (DSFOCTC) scheme of induction motor , which uses stator current vector control instead of voltage vector control. As a combination of direct torque control (DTC) and flux oriented vector control, it achieves round stator flux and continuous dynamic torque control resulting in less torque ripple than that in DTC. It reduces the dependence on rotor parameters, and is especially insensitive to rotor resistance. Finally, an induction motor speed control system incorporating this novel scheme is given and checked by simulation.

Modeling of Intelligent Integrated Network Management System Using Object Oriented Approach *

The concept of intelligent integrated network management (IINM) is briefly introduced. In order to analyze, design and implement IINM successfully, object oriented approach is testified to be an effective and efficient way. In this paper, object oriented technique is applied to the structural model of IINM system, The Domain object class and the MU object class are used to represent the manager and the managed resources. Especially, NM IA is introduced which is a special object class with intelligent behaviors to manage the resources efficiently.

DESIGN OF WINDOW BASED AND OBJECT ORIENTED GUI

This paper discusses the design concept and method about window based and object oriented Graphic User Interface(GUI),and describes the definition of each class in detail. It is developed with Watcom C ++ in DOS environment.The GUI can be redeveloped conveniently and effectively by users.It consists of window,popup menu,icon,button and other components.

OBJECT ORIENTED DATA MODELLING WITH APPLICATIONS TO CAD

An object oriented data modelling in computer aided design (CAD) databases is focused. Starting with the discussion of data modelling requirements for CAD applications, appropriate data modelling features are introduced herewith. A feasible approach to select the “best” data model for an application is to analyze the data which has to be stored in the database. A data model is appropriate for modelling a given task if the information of the application environment can be easily mapped to the data model. Thus, the involved data are analyzed and then object oriented data model appropriate for CAD applications are derived. Based on the reviewed object oriented techniques applied in CAD, object oriented data modelling in CAD is addressed in details. At last 3D geometrical data models and implementation of their data model using the object oriented method are presented.

Non-Oriented Fe-Si Thin Strip Produced from Grain Oriented Fe-Si Strip by CSR

The grain oriented silicon strip was rolled by cross shear rolling(CSR)and then annealed to manufacture non-oriented thin silicon strip of high quality.The recrystallization of rolled grain-oriented silicon steel into non-oriented silicon steel was studied.For this purpose,CSR is better than conventional rolling,and the higher the mismatched speed rate is,the better the properties of the non-oriented thin silicon strip are.The optimum annealing schedule is heating at 1 000 ℃for 1hin pure hydrogen atmosphere added with H2 S of 0.001 0 %.

SCORE SETS IN ORIENTED 3-PARTITE GRAPHS

Abstract. Let D （U, V, W） be an oriented 3-partite graph with ｜ U ｜ = p, ｜V｜ = q and ｜W ｜ = r. For any vertex x in D（U,V,W）, let dx^＋ and dui^- be the outdegree and indegree ofx respectively. Define aui （or simply ai） = q ＋ r ＋ dui^＋ - dui^-, bvj （or simply b j） = p ＋ r ＋ d^＋vj - d^-vj and cwk （or simply ck） =p ＋ q ＋ dwk^＋ -dwk^- as the scores of ui in U,vj in V and wk in W respectively. The set A of distinct scores of the vertices of D（U, V, W） is called its score set. In this paper, we prove that if a1 is a non-negative integer, ai（2 ≤ i ≤ n - 1） are even positive integers and an is any positive integer, then for n 〉 3, there exists an oriented 3-partite graph with the score set A ={a1,Σ2i=1 ai,…,Σni=1 ai}, except when A = {0, 2, 3}. Some more results for score sets in oriented 3-partite graphs are obtained.