Dental biofilm is the initiating factor of oral diseases,such as periodontitis and caries.Orthodontic treatment could alter the microbiome structure balance,and increase the risk of such diseases.Furthermore,fixed app...Dental biofilm is the initiating factor of oral diseases,such as periodontitis and caries.Orthodontic treatment could alter the microbiome structure balance,and increase the risk of such diseases.Furthermore,fixed appliances can induce temporary changes in the microbiome community,and the changes that clear aligners bring are smaller by comparison.Temporary anchorage devices(TADs)are skeletal anchorages that are widely used in orthodontic treatment.Microorganisms affect the occurrence and development of inflammation surrounding TADs.At present,existing researches have verified the existence of plaque biofilm on the surface of TADs,but the formation of plaque biofilm and plaque composition under different stable conditions have not been fully understood.The development of high-throughput sequencing,molecular biology experiments,and metabonomics have provided new research ideas to solve this problem.They can become an effective means to explore the microbiome surrounding TADs.展开更多
Miniscrews offer a reliable alternative for anchorage during orthodontic treatment,particularly for non-cooperative patients or periodontal patients with alveolar bone loss.The study aims at assessing the correlation ...Miniscrews offer a reliable alternative for anchorage during orthodontic treatment,particularly for non-cooperative patients or periodontal patients with alveolar bone loss.The study aims at assessing the correlation of various clinical indicators with the success or failure of miniscrews used for anchorage during orthodontic treatment.Thirty-four consecutive patients with a cumulative total of 82 miniscrews implanted participated in the study.Generalized Estimating Equations were used to assess the correlation of various factors with success rates.The miniscrew was considered the unit of analysis clustered within site and within patient.The overall success rate of miniscrews was 90.2%.For every additional miniscrew used in a patient＇s oral cavity,the success rate was reduced by 67%.Retromandibular triangle and palatal placement and in movable mucosa resulted in lower success rate.The miniscrew length and diameter were found to correlate with success rates.Orthodontic force applied on miniscrews for uprighting purposes showed a lower success rate than that used for retraction.This study revealed that miniscrews present high success rates.The number of miniscrews used per patient,the miniscrew site placement,the soft tissue type of placement,the miniscrew length and diameter as well as the orthodontic force applied on the miniscrew showed significant correlation with success rates.展开更多
A growing number of studies have reported that mini-implants do not remain in exactly the same position during treatment, although they remain stable. The aim of this review was to collect data regarding primary displ...A growing number of studies have reported that mini-implants do not remain in exactly the same position during treatment, although they remain stable. The aim of this review was to collect data regarding primary displacement immediately straight after loading and secondary displacement over time. A systematic review was performed to investigate primary and secondary displacement. The amount and type of displacement were recorded. A total of 27 studies were included. Sixteen in vitro studies or studies using finite element analysis addressed primary displacement, and nine clinical studies and two animal studies addressed secondary displacement. Significant primary displacement was detected （6.4-24.4 μm） for relevant orthodontic forces （0.5-2.5 N）. The mean secondary displacement ranged from 0 to 2.7 mm for entire mini-implants, The maximum values for each clinical study ranged from 1.0 to 4.1 mm for the head, 1.0 to 1.5 for the body and 1,0 to 1.92 mm for the tail part. The most frequent type of movement was controlled tipping or bodily movement. Primary displacement did not reach a clinically significant level. However, clinicians can expect relevant secondary displacement in the direction of force. Consequently, decentralized insertion within the inter-radicular space, away from force direction, might be favourable. More evidence is needed to provide quantitative recommendations.展开更多
BACKGROUND Bimaxillary protrusion is a clinically common dentofacial deformity,particularly among Chinese patients.This kind of malformation can severely affect facial esthetics and,even in mild cases,is difficult to ...BACKGROUND Bimaxillary protrusion is a clinically common dentofacial deformity,particularly among Chinese patients.This kind of malformation can severely affect facial esthetics and,even in mild cases,is difficult to correct without surgery.Unfortunately,many patients abandon treatment because of fear of surgery.Here,we describe a case of severe skeletal bimaxillary protrusion treated with nonsurgical orthodontic treatments,highlighting an alternative treatment option.CASE SUMMARY A 31-year-old woman wished to address a severe protrusion profile(approximately 8 mm overbite)and gummy smile.Cephalometric analysis and superimposition showed a severe skeletal class II pattern with a mandibular retrusion,and proclined and protrusive mandibular incisors.Panoramic radiograph showed a missing mandibular right third molar.A diagnosis of severe bimaxillary dentoalveolar protrusion was made.Taking into account the patient’s fear of orthognathic surgery,she accepted the proposed alternative treatment using micro-implants and a self-made four-curvature torquing auxiliary.The treatment allowed for maximal en masse anterior tooth retraction,proper relocation of incisors,and alleviation of the skeletal class II pattern.Esthetically,the patient’s lip protrusion was significantly decreased as was the overjet(from 10.5 mm to 1.8 mm),and the results remained stable throughout the 2-year followup.CONCLUSION Nonsurgical treatment using micro-implants and a four-curvature torquing auxiliary may benefit severe cases of skeletal bimaxillary protrusion in adults.展开更多
Anchorage is an important factor in orthodontics and must be properly managed for a successful treatment outcome. Orthodontists have historically used many devices to prevent unwanted tooth movement. The use of minisc...Anchorage is an important factor in orthodontics and must be properly managed for a successful treatment outcome. Orthodontists have historically used many devices to prevent unwanted tooth movement. The use of miniscrews as a source of skeletal anchorage has become routine in present-day orthodontic practice. Skeletal anchorage opens up alternative treatments, to borderline surgery patients for example, who can now be treated by taking advantage of the biomechanical properties of miniscrews. Because they are bone-borne and provide excellent control over tooth movement in the three spatial planes of movement, mini-implants can be used to serve many purposes in addition to anchorage. Therefore, a variety of successful mini-implant appliances are explained in relation to the three planes of movement: sagittal, vertical, and transverse. The aim of this review is to illustrate the clinical versatility of miniscrews in the three spatial planes of malocclusion in orthodontic and orthopedic management and to define clinical guidelines for the selection, application and biomechanics of mini-implants.展开更多
During orthodontic treatment,we can achieve differential movements by using photobiomodulation(PBM)as an adjuvant before applying force.We can expect a greater bone density that initially resists movement while applyi...During orthodontic treatment,we can achieve differential movements by using photobiomodulation(PBM)as an adjuvant before applying force.We can expect a greater bone density that initially resists movement while applying PBM to the other teeth to achieve an accelerating effect.The proposed protocol is to use an 810 nm laser at 0.1W power,applying between 4 and 6J per tooth for 22 s on the vestibular and lingual root surfaces,following the axial axis of the tooth.The energy density depends on the tip selected in the instrument.Normal bone remodeling cannot be avoided by applying high doses of PBM.PBM should be applied before orthodontic force to reduce tooth movement.In addition,PBM can be used during force application to teeth that require acceleration to achieve differential movement in orthodontic treatments.The protocol is the same in both scenarios.展开更多
基金supported by the Beijing Municipal Science&Technology Commission(No.Z171100001017128)National Program for Multidisciplinary Cooperative Treatment on Major Diseases(No.PKUSSNMP-202013)+1 种基金National Natural Science Foundation of China(No.81671015)China Postdoctoral Science Foundation(No.2020M680263).
文摘Dental biofilm is the initiating factor of oral diseases,such as periodontitis and caries.Orthodontic treatment could alter the microbiome structure balance,and increase the risk of such diseases.Furthermore,fixed appliances can induce temporary changes in the microbiome community,and the changes that clear aligners bring are smaller by comparison.Temporary anchorage devices(TADs)are skeletal anchorages that are widely used in orthodontic treatment.Microorganisms affect the occurrence and development of inflammation surrounding TADs.At present,existing researches have verified the existence of plaque biofilm on the surface of TADs,but the formation of plaque biofilm and plaque composition under different stable conditions have not been fully understood.The development of high-throughput sequencing,molecular biology experiments,and metabonomics have provided new research ideas to solve this problem.They can become an effective means to explore the microbiome surrounding TADs.
文摘Miniscrews offer a reliable alternative for anchorage during orthodontic treatment,particularly for non-cooperative patients or periodontal patients with alveolar bone loss.The study aims at assessing the correlation of various clinical indicators with the success or failure of miniscrews used for anchorage during orthodontic treatment.Thirty-four consecutive patients with a cumulative total of 82 miniscrews implanted participated in the study.Generalized Estimating Equations were used to assess the correlation of various factors with success rates.The miniscrew was considered the unit of analysis clustered within site and within patient.The overall success rate of miniscrews was 90.2%.For every additional miniscrew used in a patient＇s oral cavity,the success rate was reduced by 67%.Retromandibular triangle and palatal placement and in movable mucosa resulted in lower success rate.The miniscrew length and diameter were found to correlate with success rates.Orthodontic force applied on miniscrews for uprighting purposes showed a lower success rate than that used for retraction.This study revealed that miniscrews present high success rates.The number of miniscrews used per patient,the miniscrew site placement,the soft tissue type of placement,the miniscrew length and diameter as well as the orthodontic force applied on the miniscrew showed significant correlation with success rates.
文摘A growing number of studies have reported that mini-implants do not remain in exactly the same position during treatment, although they remain stable. The aim of this review was to collect data regarding primary displacement immediately straight after loading and secondary displacement over time. A systematic review was performed to investigate primary and secondary displacement. The amount and type of displacement were recorded. A total of 27 studies were included. Sixteen in vitro studies or studies using finite element analysis addressed primary displacement, and nine clinical studies and two animal studies addressed secondary displacement. Significant primary displacement was detected （6.4-24.4 μm） for relevant orthodontic forces （0.5-2.5 N）. The mean secondary displacement ranged from 0 to 2.7 mm for entire mini-implants, The maximum values for each clinical study ranged from 1.0 to 4.1 mm for the head, 1.0 to 1.5 for the body and 1,0 to 1.92 mm for the tail part. The most frequent type of movement was controlled tipping or bodily movement. Primary displacement did not reach a clinically significant level. However, clinicians can expect relevant secondary displacement in the direction of force. Consequently, decentralized insertion within the inter-radicular space, away from force direction, might be favourable. More evidence is needed to provide quantitative recommendations.
基金National Natural Science Foundation of China,No.81970906and Sichuan Science and Technology Program,No.2019YJ0689.
文摘BACKGROUND Bimaxillary protrusion is a clinically common dentofacial deformity,particularly among Chinese patients.This kind of malformation can severely affect facial esthetics and,even in mild cases,is difficult to correct without surgery.Unfortunately,many patients abandon treatment because of fear of surgery.Here,we describe a case of severe skeletal bimaxillary protrusion treated with nonsurgical orthodontic treatments,highlighting an alternative treatment option.CASE SUMMARY A 31-year-old woman wished to address a severe protrusion profile(approximately 8 mm overbite)and gummy smile.Cephalometric analysis and superimposition showed a severe skeletal class II pattern with a mandibular retrusion,and proclined and protrusive mandibular incisors.Panoramic radiograph showed a missing mandibular right third molar.A diagnosis of severe bimaxillary dentoalveolar protrusion was made.Taking into account the patient’s fear of orthognathic surgery,she accepted the proposed alternative treatment using micro-implants and a self-made four-curvature torquing auxiliary.The treatment allowed for maximal en masse anterior tooth retraction,proper relocation of incisors,and alleviation of the skeletal class II pattern.Esthetically,the patient’s lip protrusion was significantly decreased as was the overjet(from 10.5 mm to 1.8 mm),and the results remained stable throughout the 2-year followup.CONCLUSION Nonsurgical treatment using micro-implants and a four-curvature torquing auxiliary may benefit severe cases of skeletal bimaxillary protrusion in adults.
文摘Anchorage is an important factor in orthodontics and must be properly managed for a successful treatment outcome. Orthodontists have historically used many devices to prevent unwanted tooth movement. The use of miniscrews as a source of skeletal anchorage has become routine in present-day orthodontic practice. Skeletal anchorage opens up alternative treatments, to borderline surgery patients for example, who can now be treated by taking advantage of the biomechanical properties of miniscrews. Because they are bone-borne and provide excellent control over tooth movement in the three spatial planes of movement, mini-implants can be used to serve many purposes in addition to anchorage. Therefore, a variety of successful mini-implant appliances are explained in relation to the three planes of movement: sagittal, vertical, and transverse. The aim of this review is to illustrate the clinical versatility of miniscrews in the three spatial planes of malocclusion in orthodontic and orthopedic management and to define clinical guidelines for the selection, application and biomechanics of mini-implants.
文摘During orthodontic treatment,we can achieve differential movements by using photobiomodulation(PBM)as an adjuvant before applying force.We can expect a greater bone density that initially resists movement while applying PBM to the other teeth to achieve an accelerating effect.The proposed protocol is to use an 810 nm laser at 0.1W power,applying between 4 and 6J per tooth for 22 s on the vestibular and lingual root surfaces,following the axial axis of the tooth.The energy density depends on the tip selected in the instrument.Normal bone remodeling cannot be avoided by applying high doses of PBM.PBM should be applied before orthodontic force to reduce tooth movement.In addition,PBM can be used during force application to teeth that require acceleration to achieve differential movement in orthodontic treatments.The protocol is the same in both scenarios.
