Experimental and Numerical Evaluation of the Cavitation Performances of Self-Excited Oscillating Jets

Self-excited oscillating jets(SOJ)are used in several practical applications.Their performances are significantly affected by structural parameters and the target distance.In this study,a geometric model of the SOJ nozzle accounting for multiple structural parameters is introduced,then the related cavitation performances and the optimal target distance are investigated using a Large-Eddy Simulation(LES)approach.Results are also provided about an experiment,which was conducted to validate the simulation results.By analyzing the evolution of the vapor volume fraction at the nozzle outlet,a discussion is presented about the effect of the aforementioned structural parameters on the cavitation performances and the target distance.It is shown that the distribution of cavitation clouds at the outlet of the SOJ nozzle displays a non-monotonic trend(first increasing,then decreasing).Under working conditions with an inlet pressure of 4 MPa,a SOJ nozzle outlet/inlet diameter ratio(D_(1)/D_(2))of 1.2,and a chamber diameter ratio(D/L)close to 1.8,the nozzle outlet cavitation performance attains a maximum.The optimal structural parameters correspond to the optimal target distance,which is near 50 mm.The experiments have revealed that the SOJ nozzle with the above parameters displays a good cavitation erosion effect at the target distance of 50 mm,in satisfactory agreement with the numerical simulation results.

Numerical Examination of a Cavity Containing Nanofluid with an Upper Oscillating Wall and Baffle

The cavity with lid-driven is greatly used in mixing,coating,and drying applications and is a substantial issue in the study of thermal performance rate and fluid field.A numerical approach is presented to study the thermal distribution and passage of fluid in a lid-driven cavity with an upper oscillating surface and an attached baffle.The walls of a cavity at the left and right were maintained at 350 and 293 K,respectively.The upper oscillating surface was equipped with a variable height to baffle to increase the convection of the three kinds of TiO_(2),Al_(2)O_(3),andCuO nanofluids with various of 0.4,0.8,and 0.4,0.8,and 1.2 vol.%in volume fractions.It was found that using a baffle attached to the oscillating upper surface of the cavity will lead to improving the distribution of vorticity in the cavity and increase the stream in the cavity.Also,increasing the baffle height,oscillating velocity,and volume fraction of nanoparticles contributes to enhancing the Nusselt number values by 50%for increasing baffle height from h∗=0.1 to 0.1.Also,the Nu improved by 20%for increasing oscillating velocity from w=05 to 20 rad/s and by 12%for using Al_(2)O_(3)nanofluid instead of TiO3 atϕ=0.8 vol.%.

The Respiratory Rehabilitation Effect and Mechanism of Action of Oscillating Positive Expiratory Pressure Devices

Chronic respiratory diseases are one of the major global health problems,and their treatment and management impose a huge burden on both patients’quality of life and healthcare resources.Respiratory rehabilitation,as a non-pharmacological treatment,has received increasing attention in recent years.Oscillating positive expiratory pressure(OPEP)devices,as a new type of respiratory rehabilitation device,show good application prospects in improving respiratory function,promoting sputum expectoration,and improving quality of life.The purpose of this paper is to review the effect and mechanism of OPEP in respiratory rehabilitation.

Beam oscillating parameters on pore inhibition,recrystallization and grain boundary characteristics of laser-arc hybrid welded AZ31 magnesium alloy

Oscillating laser-arc hybrid welding of AZ31B magnesium alloy was carried out,the effects of beam oscillation parameters on pore inhibition,microstructure,grain boundary characteristics and tensile properties were investigated.The results showed that the pore formation can be inhibited with oscillating frequency higher than 75 Hz and radius smaller than 0.5 mm.The columnar grains neighboring the fusion line can be broken by the beam oscillation behavior,while the grain growth was promoted with the increase of frequency or radius.It should be noted that the coincidence site lattice(CSL)boundaries were mainlyΣ13b andΣ29 boundaries,which were contributed by{10■2}tensile twins and{11■2}compression twins,respectively.The total fraction of CSL boundaries reached maximum at radius of 0.25 mm and frequency of 75 Hz,which was also confirmed as the optimized parameters.In this case,the elongation rate increased up to 13.2%,12.8%higher than that of the weld without beam oscillation.Finally,the pore formation and inhibition mechanisms were illustrated according to the state of melt flow and keyhole formation,the abnormal growth was discussed basing on secondary recrystallization,and the relationship among the pore formation,grain size,boundary characteristics and weld toughness were finally established.

Pulsations of Three Rapidly Oscillating Ap Stars TIC 96315731,TIC72392575,and TIC 318007796

We analyze the frequencies of three known roAp stars,TIC 96315731,TIC 72392575,and TIC 318007796,using the light curves from the Transiting Exoplanet Survey Satellite.For TIC 96315731,the rotational and pulsational frequencies are 0.1498360 day^(-1)and 165.2609 day^(-1),respectively.In the case of TIC 72392575,the rotational frequency is 0.25551 day^(-1).We detect a quintuplet of pulsation frequencies with a center frequency of135.9233 day^(-1),along with two signals within the second pair of rotational sidelobes of the quintuplet separated by the rotation frequency.These two signals may correspond to the frequencies of a dipole mode.In TIC318007796,the rotational and pulsational frequencies are 0.2475021 day^(-1),192.73995 day^(-1),and196.33065 day^(-1),respectively.Based on the oblique pulsator model,we calculate the rotation inclination(i)and magnetic obliquity angle(b)for the stars,which provide the geometry of the pulsation modes.Combining the phases of the frequency quintuplets,the pulsation amplitude and phase modulation curves,and the results of spherical harmonic decomposition,we conclude that the pulsation modes of frequency quintuplets in TIC96315731,TIC 72392575,and TIC 318007796 correspond to distorted dipole mode,distorted quadrupole mode,and distorted dipole mode,respectively.

Averaged Dynamics of Fluids near the Oscillating Interface in a Hele-Shaw Cell

The steady flow in a Hele-Shaw cell filled with fluids with a high viscosity contrast in the presence of fluid oscillations is experimentally studied.The control of oscillatory dynamics of multiphase systems with interfaces is a challenging technological problem.We consider miscible(water and glycerol)and immiscible(water and high-viscosity silicone oil PMS-1000)fluids under subsonic oscillations perpendicular to the interface.Observations show that the interface shape depends on the amplitude and frequency of oscillations.The interface is undisturbed only in the absence of oscillations.Under small amplitudes,the interface between water and glycerol widens due to mixing.When the critical amplitude is reached,the interface becomes unstable to the fingering instability:Aqueous fingers penetrate the high-viscosity glycerol and induce intensive mixing of miscible fluids and associated decay of the instability.After the disappearance of the fingers,the interface takes a U-shape in the central part of the cell.A similar effect is observed for immiscible fluids:The oscillating interface tends to bend to the side of a high-viscosity fluid.Again,when the critical amplitude is reached,the fingering instability arises at the convex interface.This paper focuses on the causes of bending of the initially undisturbed interface between miscible or immiscible fluids.For this purpose,we measure the steady flow velocity near the interface and in the bulk of a high-viscosity fluid using Particle Image Velocimetry(PIV).

Combined Action of Uniform Flow and Oscillating Flow Around Marine Riser at Low Keulegan-Carpenter Number

With the increase of petroleum and gas production in deep ocean, marine risers of circular cylinder shape are widely used in the offshore oil and gas platform. In order to research the hydrodynamic performance of marine risers, the dynamic mesh technique and User-Defined Function(UDF) are used to simulate the circular cylinder motion. The motion of a transversely oscillating circular cylinder in combination of uniform flow and oscillating flow is simulated. The uniform flow and oscillating flow both are in x direction. SIMPLE algorithm is used to solve the Navier-Stokes equations. The User-Defined Function is used to control the cylinder transverse vibration and the inlet flow. The lift and drag coefficient changing with time and the map of vorticity isolines at different phase angle are obtained. Force time histories are shown for uniform flow at Reynolds number(Re) of 200 and for the combination of uniform and oscillating flows. With the increase of amplitude of oscillating flow in combined flow, the change of lift amplitude is not sensitive to the the change of cylinder oscillating frequency. Lift amplitude increases with the increase of oscillating flow amplitude in the combined flow, but there is no definite periodicity of the lift coefficient. The drag and inertia force coefficients change when the maximum velocity of the oscillating flow increases in the combined flow. The vortex shedding near the circular cylinder shows different characteristics.

Experiment investigation on visualization and operating characteristics of closed loop plate oscillating heat pipe with parallel channels

Using ethanol or acetone as the working fluid, visualization of oscillations in steady state was observed visually by high-speed cameras, and temperature oscillating and heat transfer characteristics of closed-loop plate oscillating heat pipe with parallel channels(POHP-PC) were experimentally investigated by varying liquid filled ratios(50%, 70%, 85%), section scales(1 mm×1 mm and 1 mm×1.5 mm), inclination angles, working fluids and heating inputs. It was found that during operating there was mixed flow consisting of plug flow and annular flow in channels of oscillating heat pipe at steady-state. There was an equilibrium position for working fluid of condenser during oscillating, and periodic oscillations occurred up and down in the vicinity of equilibrium position. With heat input increasing, equilibrium position rose slowly as a result of vapor pressure of evaporation.Evaporation temperature oscillating amplitude possessed a trend of small-large-small and frequency trend was of small-large during steady-state. It may be generally concluded that temperature, whether evaporator or condenser, fluctuated sharply or rose continuously when oscillating heat pipe coming to dry burning state. Simultaneously, it was found that temperature difference of cooling water possibly dropped with heat input rising during dry burning state. Thermal resistance of No. 2 with acetone was lower than that of No. 1 during experiments, but No. 2 achieving heat transfer limit was earlier than No. 1. However, with ethanol, thermal resistance of No. 1 and No. 2 were similar with the heating input less than 110-120 W and filling ratios of 50% and 70%. And with filling ratio of 85%, heating transfer performance of No. 2 was better compared to No. 1 during all the experiments.

Nucleation of Kinetic Ising Model Under Oscillating Field

We have studied the nucleation process of a two-dimensional kinetic Ising model subject to a bias oscillating external field, focusing on how the nucleation time depends on the oscillation frequency. It is found that the nucleation time shows a clear-cut minimum with the variation of oscillation frequency, wherein the average size of the critical nuclei is the smallest, indicating that an oscillating external field with an optimal frequency can be much more favorable to the nucleation process than a constant field. We have also investigated the effect of the initial phase of the external field, which helps to illustrate the occurrence of such an interesting finding.

Analysis of Heat Transfer Performance of Oscillating Heat Pipes Based on a Central Composite Design

Oscillating heat pipes (OHPs) are very promising cooling devices. Their heat transfer performance is af- fected by many factors, and the form of the relationship between the performance and the factors is complex and non-linear. In this paper, the effects of charging ratio, inclination angle, and heat input and their interaction effects on heat transfer performance of a looped copper-water OHP are analyzed. First, suppose that the relationship between the response and the variables approximates a second-order model. And use the central composite design to arrange the ex- periment. Then, the method of least squares is used to estimate the parameters in the second-order model. Finally, multi- variate variance analysis is used to analyze the model. The results show that the assumption is right, that is to say, the re- lationship is well modeled by a second-order function. Among the three main effect variables, the effect of inclination angle is the most significant, but their interaction effects are not significant. In the range of the considered factors, both the optimum charging ratio and the optimum inclination angle increase as the heating water flow rate increases.

Function chain neural network prediction on heat transfer performance of oscillating heat pipe based on grey relational analysis

As for the factors affecting the heat transfer performance of complex and nonlinear oscillating heat pipe (OHP),grey relational analysis (GRA) was used to deal with the relationship between heat transfer rate of a looped copper-water OHP and charging ratio,inner diameter,inclination angel,heat input,number of turns,and the main influencing factors were defined.Then,forecasting model was obtained by using main influencing factors (such as charging ratio,interior diameter,and inclination angel) as the inputs of function chain neural network.The results show that the relative average error between the predicted and actual value is 4%,which illustrates that the function chain neural network can be applied to predict the performance of OHP accurately.

Lagrangian-based numerical investigation of aerodynamic performance of an oscillating foil

The dynamic stall problem for blades is related to the general performance of wind turbines,where a varying flow field is introduced with a rapid change of the effective angle of attack (AOA).The objective of this work is to study the aerodynamic performance of a sinusoidally oscillating NACA0012 airfoil.The coupled k-ω Menter's shear stress transport (SST) turbulence model and γ-Reθ transition model were used for turbulence closure.Lagrangian coherent structures (LCS) were utilized to analyze the dynamic behavior of the flow structures.The computational results were supported by the experiments.The results indicated that this numerical method can well describe the dynamic stall process.For the case with reduced frequency K =0.1,the lift and drag coefficients increase constantly with increasing angle prior to dynamic stall.When the AOA reaches the stall angle,the lift and drag coefficients decline suddenly due to the interplay between the first leading-and trailing-edge vortex.With further increase of the AOA,both the lift and drag coefficients experience a secondary rise and fall process because of formation and shedding of the secondary vortex.The results also reveal that the dynamic behavior of the flow structures can be effectively identified using the finite-time Lyapunov exponent (FTLE) field.The influence of the reduced frequency on the flow structures and energy extraction efficiency in the dynamic stall process is further discussed.When the reduced frequency increases,the dynamic stall is delayed and the total energy extraction efficiency is enhanced.With K =0.05,the amplitude of the dynamic coefficients fluctuates more significantly in the poststall process than in the case of K =0.1.

Investigation on the Oscillating Buoy Wave Power Device

An oscillating buoy wave power device (OD) is a device extracting wave power by an oscillating buoy. Being excited by waves, the buoy heaves up and down to convert wave energy into electricity by means of a mechanical or hydraulic device. Compared with an Oscillating Water Column (OWC) wave power device, the OD has the same capture width ratio as the OWC does, but much higher secondary conversion efficiency. Moreover, the chamber of the OWC, which is the most expensive and difficult part to be built, is not necessary for the OD, so it is easier to construct an OD. In this paper, a numerical calculation is conducted for an optimal design of the OD firstly, then a model of the device is built and, a model test is carried out in a wave tank. The results show that the total efficiency of the OD is much higher than that of the OWC and that the OD is a promising wave power device.

Numerical Study of Air Chamber for Oscillating Water Column Wave Energy Convertor

Oscillating Water Column （OWC） wave energy converting system is one of the most widely used facilities all over the world. The air chamber is utilized to convert the wave energy into the pneumatic energy. The numerical wave tank based on the two-phase VOF model is established in the present study toinvestigate the operating performance of OWC air chamber. The RANS equations, standard k-ε turbulence model and dynamic mesh technology are employed in the numerical model. The effects of incident wave conditions and shape parameters on the wave energy converting efficiency are studied and the capability of the present numerical wave tank on the corresponding engineering application is validated.

Numerical and Experimental Research on Modular Oscillating Fin

Fishes are famous for their ability to position themselves accurately even in turbulent flows. This ability is the result of the coordinated movement of fins which extend from the body. We have embarked on a research program designed to develop an agile and high efficient biologically inspired robotic fish based on the performance of hybrid mechanical fms. To accomplish this goal, a mechanical ray-like fin actuated by Shape Memory Alloy （SMA） is developed, which can realize both oscillatory locomotion and undulatory locomotion. We first give a brief introduction on the mechanical structure of our fin and then carry out theoretic analysis on force generation. Detailed information of these theoretical results is later revealed by Computational Huid Dynamic （CFD）, and is final validated by experiments. This robotic fin has potential application as a propulsor for future underwater vehicles in addition to being a valuable scientific instrument.

Analysis of 3D curve expansion of conical cam with oscillating tapered roller follower

This paper focuses on the analysis of running conditions and machining processes of conical cam with oscillating follower. We point out the common errors existing in the design and machining of the widely used plane expansion method of conical cam trough-out line. We show that the motion can be divided into two parts, i.e. the oscillating motion of oscillating bar and the rotary motion of oscillating bar relative to the conical cam. By increasing the rotary motion of oscillating bar, the motion path of tapered roller on oscillating bar (i.e. contour surface of conical cam) can be expanded on the cylinder. Based on these analyses, we present a creative and effective designing and machining method for 3D curve expansion of conical cam with oscillating follower.

Meshing Theoretical Study and Simulation on Cylindrical Tri-sine Oscillating Tooth Gear Drive

The structure of cylindrical tri-sine oscillating tooth gear drive is presented. Based on the space meshing theory, equations of meshing and tooth profile are established and its meshing theory is studied. Using Pro/E, this system is modeled and simulated,which is compared with the above-established equations.

Research on droplet transfer in oscillating arc narrow gap GMA welding

In this paper, the droplet transfer in oscillating arc narrow gap gas metal arc （ GMA ） welding was studied. According to the experimental results, the oscillating arc has effect on the droplet transfer mode. The droplet transfer frequency in narrow gap groove is higher than that in bead-on-plate welding. Because of the change of arc location in narrow gap groove, the droplet transfer in oscillating arc narrow gap changes regularly. The droplet transfer frequency near groove sidewall is higher than that at the middle of narrow gap groove.

Fully Nonlinear Time Domain Analysis for Hydrodynamic Performance of An Oscillating Wave Surge Converter

The hydrodynamic behaviour of an oscillating wave surge converter(OWSC) in large motion excited by nonlinear waves is investigated. The mechanism through which the wave energy is absorbed in the nonlinear system is analysed. The mathematical model used is based on the velocity potential theory together with the fully nonlinear boundary conditions on the moving body surface and deforming free surface. The problem is solved by the boundary element method. Numerical results are obtained to show how to adjust the mechanical properties of the OWSC to achieve the best efficiency in a given wave, together with the nonlinear effect of the wave height. Numerical results are also provided to show the behaviour of a given OWSC in waves of different frequencies and different heights.

Scour of the Seabed Under A Pipeline in Oscillating Flow

The scour of the seabed under a pipeline is studied experimentally in this paper. Tests are carried out in a U-shaped oscillatory water tunnel with a box imbedded in the bottom of the test section. By use of the standard sand, clay and plastic grain as the seabed material, the influence of the bed material on the scour is studied. The relationship between the critical initial gap-to-diameter ratio above which no scour occurs and the parameters of the oscillating flow is obtained. The self-burial phenomenon. which occurs for the pipeline not fixed to two sidewalls of the test section, is not observed for the Bred pipeline. The effect of the pipe on sand wave formation is discussed. The maximum equilibrium scour depths For different initial gap-to-diameter ratios, different Kc numbers and different bed sands are also given in this paper.