Mobile bed thickness in skewed asymmetric oscillatory sheet flows

A new instantaneous mobile bed thickness model is presented for sediment transport in skewed asymmetric oscillatory sheet flows. The proposed model includes a basic bed load part and a suspended load part related to the Shields parameter, and takes into account the effects of mass conservation, phase-lag, and asymmetric boundary layer development, which are important in skewed asymmetric flows but usually absent in classical models. The proposed model is validated by erosion depth and sheet flow layer thickness data in both steady and unsteady flows, and applied to a new instantaneous sediment transport rate formula. With higher accuracy than classical empirical models in steady flows, the new formula can also be used for instantaneous sediment transport rate prediction in skewed asymmetric oscillatory sheet flows.

FLOW STRUCTURES AND FORCE CHARACTERISTICS FOR FLAT PLATE IN OSCILLATORY FLOWS WITH K_c NUMBER FROM 2 TO 40 AND IN COMBINED FLOWS

The evolution of wake structures and variation of the forces on a flat plate in harmonic oscillatory and in-line combined flows are obtained numerically by improved discrete vortex method. For the oscillatory oncoming flow cases, when K_c number varies from 2 to 40, the vortex pattern changes from a 'harmonic wave' shaped (in a range of small K_c numbers) to a slight inclined 'harmonic wave' shaped (in a range of moderate K_c numbers), then to inclined vortex clusters with an angle of 50 ° to the oncoming flow direction (at K_c = 20), at last, as K_c number becomes large, the vortex pattern is like a normal Karman vortex street. The well predicted drag and inertia force coefficients are obtained, which are more close to the results of Keulegan & Carpenter's experiment as compared with previous vortex simulation by other au- thors. The existence of minimum point of inertia force coefficient C_m near K_c = 20 is also well predicted and this phenomenon can be interpreted according to the vortex structure. For steady-oscillatory in-line combined flow cases, the vortex modes behave like a vortex street, exhibit a 'longitudinal wave' structure, and a vor- tex cluster shape corresponding to the ratios of U_m to U_0 which are of O (10^(-1)), O(1)and O (10), respectively. The effect on the prediction of forces on the flat plate from the disturbance component in a combined flow has been demon- strated qualitatively. In addition to this, the lock-in phenomenon of vortex shedding has been checked.

INVESTIG ATIONS OF WAKE FLOWS OF A FLAT PLATE IN STEADY, OSCILLATORY AND COMBINED FLOWS

Numerical study on near wake flows of a flat plate in three kinds of oncoming flows is made by using the discrete vortex model and improved vorticity creation method. For steady oncoming flow, both gross and detailed features of the wake flow are calculated and discussed. Then, in harmonic oscillatory oncoming flow two different wake flow patterns with K_c=2,4 and 10 are obtained respectively. Our results present a new wake flow pattern for low K_c numbers (K_c<5) describing vortex shedding, pairing and moving in a period of the oscillatory flow starting from rest. The calculated drag and inertia force coefficients are closer to experimental data from the U-tube than the previous results of vortex simulation. For in-line combined oncoming flow the vortex lock-in and dynamic characteristics are simulated. The results are shown to be in good agreement with experiments.

Utilization of Maxwell-Cattaneo law for MHD swirling flow through oscillatory disk subject to porous medium

The present study aims to investigate the salient features of incompressible, hydromagnetic, three-dimensional flow of viscous fluid subject to the oscillatory motion of a disk. The rotating disk is contained in a porous medium. Furthermore, a time-invariant version of the Maxwell-Cattaneo law is implemented in the energy equation. The flow problem is normalized by obtaining similarity variables. The resulting nonlinear system is solved numerically using the successive over-relaxation method. The main results are discussed through graphical representations and tables. It is perceived that the thermal relaxation time parameter decreases the temperature curves and increases the heat trans- fer rate. The oscillatory curves for the velocity field demonstrate a decreasing tendency with the increasing porosity parameter values. Two- and three-dimensional flow phenom- ena are also shown through graphical results.

Numerical solution of oscillatory flow of Maxwell fluid in a rectangular straight duct

A numerical analysis is presented for the oscillatory flow of Maxwell fluid in a rectangular straight duct subjected to a simple harmonic periodic pressure gradient.The numerical solutions are obtained by a finite difference scheme method.The stability of this finite difference scheme method is discussed.The distributions of the velocity and phase difference are given numerically and graphically.The effects of the Reynolds number,relaxation time,and aspect ratio of the cross section on the oscillatory flow are investigated.The results show that when the relaxation time of the Maxwell model and the Reynolds number increase,the resonance phenomena for the distributions of the velocity and phase difference enhance.

Oscillatory flow of second grade fluid in cylindrical tube

The unsteady oscillatory flow of an incompressible second grade fluid in a cylindrical tube with large wall suction is studied analytically. Flow in the tube is due to uniform suction at the permeable walls, and the oscillations in the velocity field are due to small amplitude time harmonic pressure waves. The physical quantities of interest are the velocity field, the amplitude of oscillation, and the penetration depth of the oscillatory wave. The analytical solution of the governing boundary value problem is obtained, and the effects of second grade fluid parameters are analyzed and discussed.

NUMERICAL STUDY OF AN OSCILLATORY TURBULENT FLOW OVER A FLAT PLATE

Oscillatory turbulent flow over a flat plate was studied by using large eddy simulation (LES) and Reynolds-average Navier-Stokes (RANS) methods. A dynamic subgrid-scale model was employed in LES and Saffman's turbulence model was used in RANS. The flow behaviors were discussed for the accelerating and decelerating phases during the oscillating cycle. The friction force on the wall and its phase shift from laminar to turbulent regime were also investigated for different Reynolds numbers. (Edited author abstract) 11 Refs.

Some exact solutions of the oscillatory motion of a generalized second grade fluid in an annular region of two cylinders

The velocity field and the associated shear stress corresponding to the longitudinal oscillatory flow of a generalized second grade fluid, between two infinite coaxial circular cylinders, are determined by means of the Laplace and Hankel transforms. Initially, the fluid and cylinders are at rest and at t = 0＋ both cylinders suddenly begin to oscillate along their common axis with simple harmonic motions having angular frequencies Ω1 and Ω2. The solutions that have been obtained are presented under integral and series forms in terms of the generalized G and R functions and satisfy the governing differential equation and all imposed initial and boundary conditions. The respective solutions for the motion between the cylinders, when one of them is at rest, can be obtained from our general solutions. Furthermore, the corresponding solutions for the similar flow of ordinary second grade fluid and Newtonian fluid are also obtained as limiting cases of our general solutions. At the end, the effect of different parameters on the flow of ordinary second grade and generalized second grade fluid are investigated graphically by plotting velocity profiles.

Low frequency oscillatory flow in a rotating curved pipe

The low frequency oscillatory flow in a rotating curved pipe was studied by using the method of bi parameter perturbation. Perturbation solutions up to the second order were obtained and the effects of rotation on the low frequency oscillatory flow were examined in detail. The results indicated that there exists evident difference between the low frequency oscillatory flow in a rotating curved pipe and in a curved pipe without rotation. During a period, four secondary vortexes may exist on the circular cross section and the distribution of axial velocity and wall shear stress are related to the ratio of the Coriolis force to centrifugal force and the axial pressure gradient.

Computational Analysis of the Oscillatory Mixed Convection Flow along a Horizontal Circular Cylinder in Thermally Stratified Medium

The present work emphasizes the significance of oscillatory mixed convection stratified fluid and heat transfer characteristics at different stations of non-conducting horizontally circular cylinder in the presence of thermally stratified medium.To remove the difficulties in illustrating the coupled PDE’s,the finite-difference scheme with efficient primitive-variable formulation is proposed to transform dimensionless equations.The numerical simulations of coupled non-dimensional equations are computed in terms velocity of fluid,temperature and magnetic field which are computed to examine the fluctuating components of skin friction,heat transfer and current density for various emerging parameters.The governing parameters namely,thermally stratification parameter𝑆𝑆𝑡𝑡,mixed-convection parameter𝜆𝜆,Prandtl number Pr,magnetic force parameter𝜉𝜉and magnetic-Prandtl number𝛾𝛾are displayed graphically at selected values for velocity and heat transfer mechanism.It is computed that heat transfer attains maximum amplitude and good variations in the presence of thermally stratified parameter at each position𝛼𝛼=𝜋𝜋6⁄,𝛼𝛼=𝜋𝜋3⁄and𝛼𝛼=𝜋𝜋around the surface of non-conducting horizontally cylinder.The velocity of fluid attains certain height at station𝛼𝛼=𝜋𝜋6⁄for higher value of stratification parameter.It is also found that the temperature gradient decreases with stratification parameter𝑆𝑆𝑡𝑡,but it increases after a certain distance𝑌𝑌from the cylinder.The novelty of the current work is that due to non-conducting phenomena the magnetic effects are strongly observed far from the surface but exact at the surface are zero for each position.

Oscillatory Couette flow of rotating Sisko fluid

The oscillatory Couette flow of a magnetohydrodynamic （MHD） Sisko fluid between two infinite non-conducting parallel plates is explored in a rotating frame. The lower plate is fixed, and the upper plate is oscillating in its own plane. Using MATLAB, a numerical solution to the resulting nonlinear system is presented. The influence of the physical parameters on the velocity components is analyzed. It is found that the effect of rotation on the primary velocity is more significant than that on the secondary velocity. Further, the oscillatory character in the flow is also induced by rotation. The considered flow situation behaves inertialess when the Reynolds number is small.

Unsteady three-dimensional MHD flow of the micropolar fluid over an oscillatory disk with Cattaneo-Christov double diffusion

Cattaneo-Christov heat and mass flux models are considered rather than Fourier and Fick laws due to the presence of thermal and concentration transport hyperbolic phenomena. The generalized form of the Navier-Stokes model is considered in hydromagnetic flow. Three-dimensional (3D) unsteady fluid motion is generated by the periodic oscillations of a rotating disk. Similarity transformations are used to obtain the normalized fluid flow model. The successive over relaxation (SOR) method with finite difference schemes are accomplished for the numerical solution of the obtained partial differential non-linear system. The flow features of the velocity, microrotation, temperature, and concentration fields are discussed in pictorial forms for various physical flow parameters. The couple stresses and heat and mass transfer rates for different physical quantities are explained via tabular forms. For better insight of the physical fluid model, 3D fluid phenomena and two-dimensional (2D) contours are also plotted. The results show that the micropolar fluids contain microstructure having non-symmetric stress tensor and are useful in lubrication theory. Moreover, the thermal and concentration waves in Cattaneo-Christov models have a significance role in the laser heating and enhancement in thermal conductivity.

Research on the Effects of in-Line Oscillatory Flow on the Vortex-Induced Motions of A Deep Draft Semi-Submersible in Currents

A Deep Draft Semi-submersible （DDS） under certain flow conditions could be subjected to Vortex-Induced Motions （VIM）, which significantly influences the loads on and life fatigue of the moorings and the risers. To investigate the VIM of a DDS with four rectangular section columns in waves coupled with a uniform current, a numerical study using the computational fluid dynamics （CFD） method was conducted. The issues of the VIM of multi-column floaters can be con＇,＇eniently converted to the issues of oscillating cylinders in fluid cross flows. This paper looks into the CFD numerical simulation of infinite cylinders having rectangular sections in a two-dimensional sinusoidal time- dependent flow field coupled with a uniform current. The resulted hydrodynamic forces and motion responses in different oscillatory flows plus currents both aligned in the same direction for the incidence of 135° of the DDS relative to the flow are compared with the ones in current only cases. The results show that the VIM response of this geometric arrangement of a DDS with four rectangular columns in a current combined with oscillatory flows is more evident than that in the current only case. The oscillatory flows and waves have the significant influence on the VIM response, forces and trajectory, in-plane motions of the DDS.

ANALYSIS OF OSCILLATORY FLOW IN CONSIDERATION OF A PLASMA LAYER IN ARTERIAL STENOSES

This paper presents the influences of plasma layer on the oscillatory flow inarterial stenosis. The analysis demonstrates that the existence of the plasma layer mayobviously change the characteristics of flow such as velocity-profiles, longitudinalimpedance and pressure gradient, but hardly change the phase of longitudinalimpedance and pressure gradient. Besides. such influences vary with a and degree ofstenosis. These analyses have Special physiological significance in blood circulationsystem.

The Oscillatory Motion of Oldroyd-B Fluid by Incorporating Some of the Mechanical Factors

The aim of this paper is to present a numerical study of oscillatory motion of Oldroyd-B fluid in a uniform magnetic field through a small circular pipe. First, we derive the orientation stress tensor by considering the Brownian force. Then, the orientation stress tensor is incorporated by taking Hookean dumbbells on Brownian configuration fields in the Oldroyd-B model. The Oldroyd-B model is then reformulated coupled with the momentum equation and the total stress tensor. Finally, we analyze the orientation stress tensor in the pipe by the numerical simulations of the model and showed that the effect of orientation stress tensor is considerable although the Brownian force is sufficiently small.

Hydrodynamic Forces on Smooth Inclined Cyh'nders in Oscillatory Flow

-The hydrodynamic forces on a smooth inclined circular cylinder exposed to oscillating flow were experimentally investigated at Reynolds number (Re) in the range 40000-200000 and Keulegan-Capenter number (KC) in the interval from 5-40. In the test, Re number and KC number were varied systematically. The inertia force coefficient (Cu) and the drag force coefficient (CD) in Morison equation were determined from the measured loads and the water particle kinematics. In this analysis a modified form of Morison equation was used since it uses the normal velocity and acceleration. Thus, the applicability of the Cross Flow Principle was assumed. This principle, simply stated, is as follows: the force acting in the direction normal to the axis of a cylinder placed at some oblique angle with the direction of flow is expressed in terms of the normal component of flow only, and the axial component is disregarded. Both the total in-line force coefficient (CF) and transverse force (lift) coefficient (Cf) were analyzed in terms of their maximum and root mean square values. All the in-line and lift force coefficients were given as a functions of Re and KC number. F'rom this research, it can be seen that the Cross-Flow Principle does not always work well. It seems valid for the total in- line force at high Re and large KC numbers. The Cu for a = 45 is larger and the CD for a = 45 is smaller than that for a = 90 ?and Re> 80000. The hydrodynamic force coefficients CD and Cu for the inclined cylinder are only the functions of the oblique angle (a) and KC number, but not of the Re number.

MHD Heat and Mass Transfer of an Oscillatory Flow over a Vertical Permeable Plate in a Porous Medium with Chemical Reaction

The problem of magneto-hydro-dynamic (MHD) mass and heat transfer of an oscillatory fluid in two-dimensional viscous, electrically conducting over an infinite vertical permeable moving plate in a saturated porous medium with the presence of a transverse magnetic field and chemical reaction is analytically presented. The governing equations, momentum, energy, and concentration are solved. Various flow parameters effects on velocity, temperature and concentration fields are discussed. It is found that, the fluid velocity increases with increasing both the permeability and chemical reaction parameters. While, it increases with decreasing the magnetic field parameter. Furthermore, the concentration increases with increasing chemical reaction parameters.

Influences of oscillatory structural forces on dewetting of nanoparticle-laden ultrathin films

To understand the influences of nanoparticles on dewetting in ultra-thin films, both linear stability the- ory and numerical simulations are performed in the present study, with the consideration of oscillatory structural （OS） forces. Long scale approximation is utilized to simplify the hydrodynamic and diffusion equations to a nonlinear system for film thickness and nanoparticle concentration. Results show that the presence of nanoparticles generally suppresses the dewetting process. Two physical mechanisms responsi- ble for this phenomenon are addressed in the present study. When the oscillatory structural forces are relatively smaller, the essential feature of film evolution is similar to the case of particle-free flow. The reduction of the linear growth rate and the postponement of film rupturing can be attributed to the increment of the viscosity due to the presence of nanoparti- cles. On the other hand, when the intensity of the OS forces becomes stronger, the stepwise thinning of film can be ob- served which prevents the film from rupture. Numerical sim- ulations indicate that this phenomenon is caused by the ex- istence of a stable zone due to the oscillatory nature of the structural forces. Another interesting finding is that the non- uniformity of the distribution of nanoparticle concentration might destabilize a spinodally stable film, and trigger the oc- currence of film dewetting.

Oscillatory Flow Fields over Rough Wall： An Experimental Investigation

In this paper the results of an experimental investigation, finalized to analyze the effect of roughness elements on the Oscillatory Boundary Layer （OBL）, were presented and discussed. These experiments can be useful for the characterization of the complex hydrodynamic mechanisms in coastal environment, where the bottom boundary layer is very often subject to momentum exchange processes due to the presence of macro-structures on the bottom able to strongly influence and modify its own structure. In this investigation, experiments were performed in an oscillating water tunnel, covering a range of frequencies to from 0.646 up to 2.319 rad.s^-1. The roughness elements were modelled by mean of a matrix of stiff cylinders arranged on the bottom of the tunnel and two densities of cylinders were considered, corresponding to low and high density respectively. Velocity measurements were obtained by 2C DPIV （2 Component Digital Particle Image Velocimetry） technique. A detailed visualization of the flow through adjacent cylinders, including scalar velocity maps and streamlines are presented. Furthermore phase-averaged velocity distributions are here provided. Moreover, root-mean-squared velocities are considered and an empirical relation between （1） the root-mean-squared velocities and the distance from the bottom; （2） the velocity attenuation coefficient and the Reynolds number is obtained for both the considered configurations.

Streaming Caused by Oscillatory Flow in Peripheral Airways of Human Lung

Oscillatory flow facilitates gas exchange in human respiration system. In the present study, both numerical calculation and PIV (Particle Image Velocimetry) measurement indicate that, under the application of HFOV (High Frequency Oscillatory Ventilation), apparent steady streaming is caused and augmented in distal airways by the continuous oscillation, i.e., the core air moves downwards and the peripheral air evacuates upwards within bronchioles. The net flow of steady streaming serves to overcome the lack of tidal volume in HFOV and delivers fresh air into deeper lung region. Also, numerical calculations reveal that the intensity of steady streaming is mainly influenced by the geometry of airways with provided oscillatory frequency and tidal volume, and it rises with Re and Wo up to a Re of about 124 and Wo of about 5. Steady streaming is considered as an important factor for the ventilation efficiency of HFOV.