Coseismic Coulomb stress changes induced by a 2020-2021 M_(W)>7.0 Alaska earthquake sequence in and around the Shumagin gap and its influence on the Alaska-Aleutian subduction interface

Three M_(W)>7.0 earthquakes in 2020-2021 occurred in the Shumagin seismic gap and its adjacent area of the Alaska-Aleutian subduction zone,including the Mw7.8 Simeonof thrust earthquake on July 22,2020,the M_(W)7.6 Sand Point strike-slip earthquake on October 19,2020,and the M_(W)8.2 Chignik thrust earthquake on July 29,2021.The spatial and temporal proximity of these three earthquakes prompts us to probe stress-triggering effects among them.Here we examine the coseismic Coulomb stress change imparted by the three earthquakes and their influence on the subduction interface.Our results show that:(1)The Simeonof earthquake has strong loading effects on the subsequent Sand Point and Chignik earthquakes,with the Coulomb stress changes of 3.95 bars and 2.89 bars,respectively.The Coulomb stress change caused by the Sand Point earthquake at the hypocenter of the Chignik earthquake is merely around 0.01 bars,suggesting the negligible triggering effect on the latter earthquake;(2)The triggering effects of the Simeonof,Sand Point,and Chignik earthquakes on aftershocks within three months are not well pronounced because of the triggering rates of 38%,14%,and 43%respectively.Other factors may have played an important role in promoting the occurrence of these aftershocks,such as the roughness of the subduction interface,the complicated velocity structure of the lithosphere,and the heterogeneous prestress therein;(3)The three earthquakes caused remarkable coseismic Coulomb stress changes at the subduction interface nearby these mainshocks,with an average Coulomb stress change of 3.2 bars in the shallow region directly inwards the trench.

STACKING SEQUENCE OPTIMIZA-TION OF LAMINATED COMPOSITE CYLINDER SHELL FOR MAXIMAL BUCKLING LOAD

A new optimization method for the optimization of stacking of composite glass fiber laminates is developed. The fiber orientation and angle of the layers of the cylindrical shells are sought considering the buckling load. The proposed optimization algorithm applies both finite element analysis and the mode-pursuing sampling （MPS）method. The algorithms suggest the optimal stacking sequence for achieving the maximal buckling load. The procedure is implemented by integrating ANSYS and MATLAB. The stacking sequence designing for the symmetric angle-ply three-layered and five-layered composite cylinder shells is presented to illustrate the optimization process, respectively. Compared with the genetic algorithms, the proposed optimization method is much faster and efficient for composite staking sequence plan.

Design Optimization of CFRP Stacking Sequence Using a Multi-Island Genetic Algorithms Under Low-velocity Impact Loads

A method to improve the low-velocity impact performance of composite laminate is proposed, and a multi-island genetic algorithm is used for the optimization of composite laminate stacking sequence under low-velocity impact loads based on a 2D dynamic impact finite element analysis. Low-velocity impact tests and compression-after impact（CAI） tests have been conducted to verify the effectiveness of optimization method. Experimental results show that the impact damage areas of the optimized laminate have been reduced by 42.1% compared to the baseline specimen, and the residual compression strength has been increased by 10.79%, from baseline specimen 156.97 MPa to optimized 173.91 MPa. The tests result shows that optimization method can effectively enhance the impact performances of the laminate.

Bi-LSTM-Based Deep Stacked Sequence-to-Sequence Autoencoder for Forecasting Solar Irradiation and Wind Speed

Wind and solar energy are two popular forms of renewable energy used in microgrids and facilitating the transition towards net-zero carbon emissions by 2050.However,they are exceedingly unpredictable since they rely highly on weather and atmospheric conditions.In microgrids,smart energy management systems,such as integrated demand response programs,are permanently established on a step-ahead basis,which means that accu-rate forecasting of wind speed and solar irradiance intervals is becoming increasingly crucial to the optimal operation and planning of microgrids.With this in mind,a novel“bidirectional long short-term memory network”(Bi-LSTM)-based,deep stacked,sequence-to-sequence autoencoder(S2SAE)forecasting model for predicting short-term solar irradiation and wind speed was developed and evaluated in MATLAB.To create a deep stacked S2SAE prediction model,a deep Bi-LSTM-based encoder and decoder are stacked on top of one another to reduce the dimension of the input sequence,extract its features,and then reconstruct it to produce the forecasts.Hyperparameters of the proposed deep stacked S2SAE forecasting model were optimized using the Bayesian optimization algorithm.Moreover,the forecasting performance of the proposed Bi-LSTM-based deep stacked S2SAE model was compared to three other deep,and shallow stacked S2SAEs,i.e.,the LSTM-based deep stacked S2SAE model,gated recurrent unit-based deep stacked S2SAE model,and Bi-LSTM-based shallow stacked S2SAE model.All these models were also optimized and modeled in MATLAB.The results simulated based on actual data confirmed that the proposed model outperformed the alternatives by achieving an accuracy of up to 99.7%,which evidenced the high reliability of the proposed forecasting.

Ground movement induced by triple stacked tunneling with different construction sequences

This study tried to explore the ground movement induced by triple stacked tunneling(TST) with different construction sequences. A case study in Tianjin, China was used to investigate the ground movement during the TST(upper tunneling(UT)). For this, a modified Peck formula was proposed to predict the surface settlement induced by TST. Next, three sets of finite element analyses(FEA) were used to compare the effects of construction sequences(i.e. UT, middle tunneling(MT), and lower tunneling(LT)) on vertical and lateral ground displacements. The results of Tianjin case and UT reveal that compared to a Gaussian distribution for a single tunnel, the surface settlement curve of triple stacked tunnels is a bimodal distribution. It seems that the proposed modified Peck formula can effectively predict the surface settlement induced by TST. The results of the three sets of FEA demonstrate that the construction sequence has a significant influence on the ground movement. Among the three construction sequences, the largest lateral displacement is observed in the MT and the smallest one in UT.The existing tunnel has an inhibitory effect on the vertical displacement. The maximum value of the lateral displacement occurs at the depth of the new tunnel in each construction sequence.

基于mRMR-BO优化Stacking集成模型的NO_(x)浓度动态软测量

针对火电厂选择性催化还原(selective catalytic reduction,SCR)烟气脱硝系统中,由于影响入口NO_(x)质量浓度因素过多及系统大迟延大惯性,导致入口NO_(x)质量浓度难以准确及时测量的问题,提出了利用最大相关-最小冗余算法(max-relevance and min-redundancy,mRMR)结合贝叶斯优化算法(Bayesian optimization,BO)优化Stacking集成模型的SCR烟气脱硝系统入口NO_(x)质量浓度动态软测量模型。针对动态NO_(x)生成过程中静态单一模型预测精度降低及辅助变量与入口NO_(x)质量浓度时间异步的问题,利用mRMR-BO结合模型进行辅助变量筛选,Copula熵(copula entropy,CE)确定辅助变量迟延,BO结合模型确定辅助变量阶次,将TCN及LASSO利用Stacking法集成,使用含有迟延时间及阶次信息的辅助变量构建动态Stacking集成软测量模型。仿真结果显示:集成模型较TCN及LASSO单一网络的均方根误差、平均绝对误差、平均绝对百分比误差最小;动态集成模型对比静态集成模型,预测精度更高,能够实现对入口NO_(x)质量浓度的准确软测量。

Sequencing and Analysis of ITS Sequences of Bangia atropurpurea

[Object]To providing new data for phylogenesis of Bangia atropurpurea by the sequencing of internal transcribed spacer（ITS region）of rDNA.[Method]B.atropurpurea was collected from Niangziguan Spring in Shanxi,the DNA was extracted and the primers were designed for PCR amplification so as to obtain ITS gene sequence.[Result]The homology of ITS region between B.atropurpurea and Porphyra oligospermatangia was 75%,which was 79% between B.atropurpurea and P.yezoensis.[Conclusion]Compared with other genes,the ITS sequence had a greater evolution rate.The differences in classification and distribution resulted in the sequence diversity.

Sequence Stratigraphy and Relative Sea Level Changes in Sinian System of Yichang, Hubei Province

The study on outcrop sequence stratigraphy of the Sinian section in the Yangtze Gorges an important step in the comprehensive stratigraphy for the Sinian stratotype. In this paper, the base of the Nantuo tillite is selected as the bottom boundary of the Sinian, and the top of the Baimatuo Member of the Dengying Formation is taken as the top boundary. The Sinian lasted from 740 the to 570 Ma. According to the features of sequence boundary facies and the parasequence sets, two supersequences are recognized in the Sinian with six sequences. In this paper, the authors discuss the correlation of those sequences. On the basis of the subsidence rate and the thickness of decompressed deposits, the authors discuss the mechanism of tectonic and sedimentation of the Dengying Formation and the features of high-frequency rhythms as well as the 3rd-order sequences in the Yangtze Gorges.

Seismic Sequence in Carbonate Rocks By Vibrational Liquefaction

On the basis of the records of strong seismic events taking place in soft carbonate sediments, a new seismic sequence system of vibrational liquefaction is established, which consists of a series of units, such as escaped structure of micrite veins and liquefied deformation formed in the period of seismic liquefaction, land subsidence structure after liquefaction, tsunamic hummocky and turbidite produced by seismic events, This sequence is a generalization and summation of field observation in vast areas, which shows the whole process of a strong seismic event and provides an unified theoretical explanation. The pattern of the seismic sequence by vibrational liquefaction provides one of correlation standards for geologists in the field to discriminate events in carbonate sequences. Based on the pattern of seismic sequence, the authors first advance a new conception of the Palaeo-Tanlu (Tancheng-Lujiang) Zone and discuss primarily its geological significations.

The 20 April 2013 Lushan, Sichuan, mainshock, and its aftershock sequence: tectonic implications

Using the double-difference relocation algo- rithm, we relocated the 20 April 2013 Lushan, Sichuan, earthquake （Ms 7.0）, and its 4,567 aftershocks recorded during the period between 20 April and May 3, 2013. Our results showed that most aftershocks are relocated between 10 and 20 km depths, but some large aftershocks were relocated around 30 krn depth and small events extended upward near the surface. Vertical cross sections illustrate a shovel-shaped fault plane with a variable dip angle from the southwest to northeast along the fault. Furthermore, the dip angle of the fault plane is smaller around the mainshock than that in the surrounding areas along the fault. These results suggest that it may be easy to generate the strong earthquake in the place having a small dip angle of the fault, which is somewhat similar to the genesis of the 2008 Wenchuan earthquake. The Lushan mainshock is underlain by the seismically anomalous layers with low-Vp, low-Vs, and high-Poisson＇s ratio anomalies, possibly suggesting that the fluid-filled fractured rock matrices might signifi- cantly reduce the effective normal stress on the fault plane to bring the brittle failure. The seismic gap between Lushan and Wenchuan aftershocks is suspected to be vulnerable to future seismic risks at greater depths, if any.

SOME EULER SPACES OF DIFFERENCE SEQUENCES OF ORDER m

Kizmaz [13] studied the difference sequence spaces ∞（A）, c（A）, and co（A）. Several article dealt with the sets of sequences of m-th order difference of which are bounded, convergent, or convergent to zero. Altay and Basar [5] and Altay, Basar, and Mursaleen [7] introduced the Euler sequence spaces e0^r, ec^r, and e∞^r, respectively. The main purpose of this article is to introduce the spaces e0^r△^（m））, ec^r△^（m））, and e∞^r△^（m））consisting of all sequences whose mth order differences are in the Euler spaces e0^r, ec^r, and e∞^r, respectively. Moreover, the authors give some topological properties and inclusion relations, and determine the α-, β-, and γ-duals of the spaces e0^r△^（m））, ec^r△^（m））, and e∞^r△^（m））, and the Schauder basis of the spaces e0^r△^（m））, ec^r△^（m））. The last section of the article is devoted to the characterization of some matrix mappings on the sequence space ec^r△^（m））.

π-π Stacking, Hydrogen Bonding and Magnetic Coupling Mechanism on a Mono-nuclear Cu^Ⅱ Complex

A new mono-nuclear CuII complex [Cu（DPP）（DP）Br]（ClO4）H2O （DPP = 2-（3,5- dimethyl-1H-pyrazol-1-yl）-1,10-phenanthroline, DP = 3,5-dimethyl-1H-pyrazole） has been syn- thesized with 2-（3,5-dimethyl-1H-pyrazol-1-yl）-1,10-phenanthroline and 3,5-dimethyl-1H-pyrazole as ligands, and its crystal structure was determined by X-ray crystallography. The crystal is of monoclinic system, space group P21/c with a = 13.765（2）, b = 17.044（3）, c = 10.9044（16）, β= 97.112（2）°, V = 2538.5（6）3, Z = 4, C22H24BrClCuN6O5, Mr = 631.37, Dc = 1.652 g/cm3, F（000） = 1276 and μ= 2.585 mm-1. In the crystal, DPP functions as a tridentate ligand and CuII ions assume a distorted square pyramidal geometry with Br atom lying on the apex, and at the same time, there is π-π stacking between adjacent complexes, which deals with two 1,10-phenanthroline plane rings. In addition to the π-π stacking, there are C-H···Br non-classic hydrogen bonds between adjacent complexes. The theoretical calculations reveal that the π-π stacking and C-H···Br non-classic hydrogen bond result in a weak anti-ferromagnetic interaction with 2J = -5.34 cm-1 and a weak ferromagnetic 2J = 5.92 cm-1, respectively. The magnetic coupling sign from the π-π stacking could be explained with McConnell I spin-polarization mechanism.

Dependence of the E. coli promoter strength and physical parameters upon the nucleotide sequence

The energy of interaction between complementary nucleotides in promoter sequences of E. coli was calculated and visualized. The graphic method for presentation of energy properties of promoter sequences was elaborated on. Data obtained indicated that energy distribution through the length of promoter sequence results in picture with minima at –35, –8 and +7 regions corresponding to areas with elevated AT (adenine-thymine) content. The most important difference from the random sequences area is related to –8. Four promoter groups and their energy properties were revealed. The promoters with minimal and maximal energy of interaction between complementary nucleotides have low strengths, the strongest promoters correspond to promoter clusters characterized by intermediate energy values.

FAREY SEQUENCE OF NONLINEAR DIFFERENTIAL DYNAMIC SYSTEM IN TWO DIMENSIONS

In this paper , through the discrim ination of Farey sequence in the forced Brusselator withweak coupling , it is proved that there is a topological translation fro m a nonlinear differen tial system ( limit cycle) to the circle m ap .

Sequence stratigraphy of the petroliferous Dariyan Formation (Aptian) in Qeshm Island and offshore (southern Iran)

After sea level rises during the Early Cretaceous, upper parts of the Khami Group sediments （Fahliyan, Gadvan, and Dariyan Formations） deposited over Jurassic sediments. The Lower Cretaceous （Aptian） Dariyan Formation （equivalent to the Shu＇aiba Formation and Hawar Member of the Arabian Plate） carbonates, which have hydrocarbon reservoir potential, form the uppermost portion of the Khami Group that unconformably overlays the Gadvan Formation and was unconformably covered by the Kazhdumi Formation and Burgan sandstones. Detailed paleontological, sedimentological, and well log analysis were performed on seven wells from Qeshm Island and offshore in order to analyze the sequence stratigraphy of this interval and correlate with other studies of the Dariyan Formation in this region. According to this study, the Dariyan Formation contains 14 carbonate lithofacies, which deposited on a ramp system that deepened in both directions （NE-wells 5, 6 and SWIwells 1, 2）. Sequence stratigraphy led to recognition of 5 Aptian third-order sequences toward the Bab Basin （SW-well 1） and 4 Aptian third-order sequences toward Qeshm Island （NE-wells 5 and 6） so these areas show higher gamma on the gamma ray logs and probably have higher source rock potential. Other wells （wells 2-4 and 7） mainly deposited in shallower ramp systems and contain 3 Aptian third-order sequences. On the other hand, rudstone and boundstone lithofacies of studied wells have higher reservoir potential and were deposited during Apt 3 and Apt 4 sequences of the Arabian Plate. The Dariyan Formation in Qeshm Island （well 6） and adjacent well （well 5） was deposited in an intrashelf basin that should be classified as a new intrashelf basin in future Aptian paleogeographic maps. We interpret that salt-related differential subsidence, crustal warping, and reactivation of basement faults of the Arabian Plate boundary were responsible for the creation of the intrashelf basin in the Qeshm area.

ON THE m^(th) ORDER DIFFERENCE SEQUENCE SPACE OF GENERALIZED WEIGHTED MEAN AND COMPACT OPERATORS

In this article, using generalized weighted mean and difference matrix of order m, we introduce the paranormed sequence space l（u, v, p; △（m））, which consist of the sequences whose generalized weighted △（m）-difference means are in the linear space l（p） defined by I.J.Maddox. Also, we determine the basis of this space and compute its α-, β- and γ-duals. Further, we give the characterization of the classes of matrix mappings from l（u, v, p, △（m）） to l∞, c, and co. Finally, we apply the Hausdorff measure of noncompacness to characterize some classes of compact operators given by matrices on the space lp（U, v, △（m）） （1 ≤ p 〈 ∞）.

A Silver Complex of 6,7-Dicyanodipyridoquinoxaline:π-Stacking Interactions and Luminescence

The reaction of 6,7-dicyanodipyridoquinoxaline （DICNQ） with AgNO3 in a 1：1 molar ratio by solution method gave a new complex [Ag（DICNQ）2]NO3 1. Single-crystal X-ray diffraction analysis reveals that the complex crystallizes in the space group Ibca of orthorhombic system with eight formula units in a cell. Crystal data for 1： a = 15.7055（17）, b = 18.411（2）, c = 20.680（2）A, V = 5979.7（11）A3, Z = 8, C32Hl2AgN13O3, Mr = 734.42, Dc = 1.632 g/cm3, μ= 0.734 mm-1, F（000） = 2928, S = 1.023 and T= 293（2） K. The final R = 0.0659 and wR = 0.1927 for 2118 observed reflections with I 〉 2σ（I）, and R = 0.0801 and wR = 0.2196 for all data. The complex builds up a packing structure by π-π stacking interactions and shows a luminescent feature.

Sequence Boundary:Its Significance in Stratigraphic Subdivision,Correlation and Classification

Sequence boundary is studied in detail in reference to the Permian Guadalupian Lopingian boundary, based on high resolution correlation of conodont zones. A conceptual synchronous stratigraphic boundary, corresponding to the age of the sequence boundary dated in the conformable portion of the sequence boundary, is defined as the sequence chronostratigraphic boundary (SCB). The sequence boundary is proved to be dual in nature in regards to tin-synchrony and diachroneity of stratigraphic boundaries. The merits of the sequence boundary in stratigraphic subdivision, correlation and classification are elucidated in comparison with the lithostratigraphic boundary, the biostratigraphic boundary and the traditional approach of the global stratotype section and point (GSSP ). By integrating the virtues of the sequence boundary and the GSSP, it is proposed that the GSSP should be established in the conformable portion of the related sequence boundary. The boundary established in light of this approach is defined as the best natural boundary. The analysis of the sequence boundary leads to the conclusion that sequence stratigraphy is a regional and transitional stratigraphic system between local lithostratigraphy and global chronostratigraphy. Therefore, a new tripartite stratigraphic classification scheme is tentatively proposed.

A New Cadmium(Ⅱ) Coordination Polymer Extended through Hydrogen Bonds and π-π Stacking Interactions: Synthesis and Photoluminescence Property

A new coordination polymer, {[Cd(OPY)(tdc)(HO)]·H2 O}n(OPY = 4,4?-(oxybis(4,1-phenylene))dipyridine, H2 tdc = thiophene-2,5-dicarboxylic acid), has been synthesized hydrothermally based on a V-shaped ligand OPY. The structure was fully characterized by elemental analysis, FT-IR spectroscopy, and X-ray single-crystal diffraction analysis. In1, two OPY ligands and one water molecule acted as terminal ligands coordinating to Cdcation to form [Cd(OPY)HO]units, which are then linked by tdc2-ligands to generate a one-dimensional chain. Every two adjacent chains linked by extensive O–H···O hydrogen bonds constitute one-dimensional double-chains, and such chains are extended into two-dimensional layers via O–H···N hydrogen bonds. These layers are further connected to form a three-dimensional supramolecular architecture via π-π stacking interactions. In addition, the thermal stability and solid state fluorescence property of 1 were also investigated.

Preparation, Structure and Properties of 3D Supramolecular Architecture, on the Basis of Hydrogen Bonds and π-π Stacking Between 2D Layers, with Windmill Building Blocks

A novel three-dimensional（3D） supramolecular architecture, {[Nd（OH-BDC）（OH-HBDC）（H2O）2]·2HaO）n（1） （OH-H2BDC=5-hydroxyisophthalic acid）, which was formed through hydrogen bonds and π-π stacking between two-dimensional（2D） layers, was hydrothermally synthesized and characterized by single-crystal X-ray diffraction. Windmill building blocks, which consist of two nine-coordinated metal centers and four OH-H2BDC groups are connected through two carboxyl groups, to lead to a one-dimensional infinite inorganic chain（… M--O--C--O--M…） along the [100] direction. An observed intense blue luminescence with an emission band peaked at 390 nm for compound 1 may results from ligand-to-metal charge transfer（LMCT）. Variable-temperature magnetic susceptibility of compound 1 was investigated and the value was deviated from the Curie-Weiss law.